Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Regional and Teleconnected Impacts of Solar Radiation‐Topography Interaction Over the Tibetan Plateau

Abstract Solar radiation‐topography interaction plays an important role in surface energy balance over the Tibetan Plateau (TP). However, the impacts of such interaction over the TP on climate locally and in the Asian regions remain unclear. This study uses the Energy Exascale Earth System Model (E3SM) to evaluate the regional and teleconnected impacts of solar radiation‐topography interaction over the TP. Land‐atmosphere coupled experiments show that topography regulates the surface energy balance, snow processes, and surface climate over the TP across seasons. Accounting for solar radiation‐topography interaction improves E3SM simulation of surface climate. The winter cold bias in air temperature decreases from −4.57 to −3.79 K, and the wet bias in summer precipitation is mitigated in southern TP. The TP's solar radiation‐topography interaction further reduces the South and East Asian summer precipitation biases. Our results demonstrate the topographic roles in regional climate over the TP and highlight its teleconnected climate impacts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Effects of Surface Turbulence Flux Parameterizations on the MJO: The Role of Ocean Surface Waves

This study investigates the sensitivity of the Madden–Julian oscillation (MJO) to changes to the bulk flux parameterization and the role of ocean surface waves in air–sea coupling using a fully coupled ocean–atmosphere–wave model. The atmospheric and ocean model components of the Energy Exascale Earth System Model (E3SM) are coupled to a spectral wave model, WAVEWATCH III (WW3). Two experiments with wind speed–dependent bulk algorithms (NCAR and COARE3.0a) and one experiment with wave-state-dependent flux (COR3.0a-WAV) were conducted. We modify COARE3.0a to include surface roughness calculated within WW3 and also account for the buffering effect of waves on the relative difference between air-side and ocean-side momentum flux. Differences in surface fluxes, primarily caused by discrepancies in drag coefficients, result in significant differences in MJO’s properties. While COARE3.0a has better convection–circulation coupling than NCAR, it exhibits anomalous MJO convection east of the date line. The wave-state-dependent flux (COR3.0-WAV) improves the MJO representation over the default COARE3.0 algorithm. Strong easterlies over the Pacific Ocean in COARE3.0a enhance the latent heat flux (LHFLX). This is responsible for the anomalous MJO propagation after the date line. In COR3.0a-WAV, waves reduce the anomalous easterlies, leading to a decrease in LHFLX and MJO dissipation after the date line. These findings highlight the role of surface fluxes in MJO simulation fidelity. Most importantly, we show that the proper treatment of wave-induced effects in bulk flux parameterization improves the simulation of coupled climate variability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Hemispherically symmetric strategies for stratospheric aerosol injection

Stratospheric aerosol injection (SAI) comes with a wide range of possible design choices, such as the location and timing of the injection. Different stratospheric aerosol injection strategies can yield different climate responses; therefore, understanding the range of possible climate outcomes is crucial to making informed future decisions on SAI, along with the consideration of other factors. Yet, to date, there has been no systematic exploration of a broad range of SAI strategies. This limits the ability to determine which effects are robust across different strategies and which depend on specific injection choices. This study systematically explores how the choice of SAI strategy affects climate responses in one climate model. Here, we introduce four hemispherically symmetric injection strategies, all of which are designed to maintain the same global mean surface temperature: an annual injection at the Equator (EQ), an annual injection of equal amounts of SO 2 at 15° N and 15° S (15N+15S), an annual injection of equal amounts of SO 2 at 30° N and 30° S (30N+30S), and a polar injection strategy that injects equal amounts of SO 2 at 60° N and 60° S only during spring in each hemisphere (60N+60S). We compare these four hemispherically symmetric SAI strategies with a more complex injection strategy that injects different quantities of SO 2 at 30° N, 15° N, 15° S, and 30° S in order to maintain not only the global mean surface temperature but also its large-scale horizontal gradients. All five strategies are simulated using version 2 of the Community Earth System Model with the middle atmosphere version of the Whole Atmosphere Community Climate model, version 6, as the atmospheric component, CESM2(WACCM6-MA), with the global warming scenario, Shared Socioeconomic Pathway (SSP)2-4.5. We find that the choice of SAI strategy affects the spatial distribution of aerosol optical depths, injection efficiency, and various surface climate responses. In addition, injecting in the subtropics produces more global cooling per unit injection, with the EQ and the 60N+60S cases requiring, respectively, 59 % and 50 % more injection than the 30N+30S case to meet the same global mean temperature target. Injecting at higher latitudes results in larger Equator-to-pole temperature gradients. While all five strategies restore Arctic September sea ice, the high-latitude injection strategy is more effective due to the SAI-induced cooling occurring preferentially at higher latitudes. These results suggest trade-offs wherein different strategies appear better or worse, depending on which metrics are deemed important.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluation and improvement of the parameterization of aerosol hygroscopicity in global climate models using in-situ surface measurements (Final Report)

Aerosols are tiny particles suspended on the atmosphere that can interact with incoming solar radiation and affect the Earth radiative budget. They do so by scattering and absorbing solar radiation, and these properties vary depending on the aerosol size and chemical composition. Moreover, by taking up water from the surrounding air, hygroscopic aerosol particles will grow in size and change their chemical composition, thus modifying their optical properties (scattering and absorption) and their final impact on radiative forcing calculations. An accurate knowledge of aerosol hygroscopicity is crucial for estimating the net radiative impact of aerosols. We took a three-pronged approach to improve our understanding of aerosol hygroscopicity and how it is implemented in Earth system models. In the first part of our project, we developed a benchmark dataset from existing aerosol hygroscopic growth measurements made by tandem nephelometer humidogram systems. We analyzed, using a standardized methodology, observations from 26 in-situ stations around the globe. Measurement data was collected from multiple data providers, reviewed and harmonized to create a consistent dataset of the scattering enhancement factor due to aerosol water uptake. This dataset is archived in several publicly available databases for use by interested researchers. In the second part of the project, we used the benchmark hygroscopicity dataset to perform a global study on aerosol hygroscopicity and aerosol optical properties. Measurements show a global picture of scattering enhancement with larger values for Arctic and marine sites and lower for urban and desert sites. We assessed the RH dependence of aerosol radiative forcing and showed that the overall effect of aerosol hygroscopicity on DARF is an increase in the absolute forcing effect (negative sign) by a factor of up to 4 compared to dry conditions (RH<40%). Finally, we explored using aerosol single scattering albedo (SSA) and scattering Angstrom exponent (SAE) as possible proxies for aerosol hygroscopicity. SSA showed more promise as a surrogate for the scattering enhancement factor than SAE, but neither was ideal. In the third part of the project we evaluated the output of ten Earth system models (ESMs) against the benchmark hygroscopicity dataset. ESMs utilize various schemes for aerosol hygroscopicity which had not been previously tested against observations on a global scale. We found that ESMs currently overestimate scattering enhancement due to hygroscopic growth. Model parameterizations of hygroscopicity and model chemistry are two main factors driving the observed diversity in hygroscopicity simulations among the models. In addition, our study makes several suggestions for modelers, including improving the parameterizations of organic and sea salt aerosol hygroscopicity. Future hygroscopicity model evaluation experiments should include the model data related to particles size which was not available for our study.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Subseasonal Tropical Convection Characteristics in the Energy Exascale Earth System Model Version 2

Accurate simulation of subseasonal tropical moist convection remains a key challenge for Earth system models. The difficulties stem from the reliance of cumulus cloud processes on model parameterizations and the need to represent the multiscale nature of interactions among clouds, radiation, moisture, circulation, and surface energy fluxes. Equatorial convection drives circulation anomalies that can affect weather patterns and extremes globally, motivating efforts to better understand and simulate these tropical disturbances. Here, a detailed review of subseasonal tropical convective behavior as simulated in the Energy Exascale Earth System Model version 2 (E3SMv2) is presented, with comparison to its predecessor version 1 (E3SMv1) and reference data sets. Model structural changes to the deep convective trigger function and surface fluxes, along with parametric tuning of the cloud and microphysics schemes, together result in an improved depiction of organized tropical convection across scales. In particular, E3SMv2 exhibits a more realistic Madden‐Julian oscillation (MJO) and low‐frequency Kelvin waves—owing to a sharper time mean equatorial meridional moisture gradient and improved convection‐circulation coupling —as well as a better depiction of MJO Northern Hemisphere teleconnections. Despite these improvements, subseasonal precipitation variance continues to be strongly underestimated in E3SMv2. Use of a cloud plume model also reveals that the coupling between daily averaged tropical precipitation and lower tropospheric instability in E3SM is inconsistent with observations, a bias that could potentially impact the simulation of intraseasonal disturbances.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The Terrestrial Biosphere Model Farm

Model Intercomparison Projects (MIPs) are fundamental to our understanding of how the land surface responds to changes in climate. However, MIPs are challenging to conduct, requiring the organization of multiple, decentralized modeling teams throughout the world running common protocols. We explored centralizing these models on a single supercomputing system. We ran nine offline terrestrial biosphere models through the Terrestrial Biosphere Model Farm: CABLE, CENTURY, HyLand, ISAM, JULES, LPJ-GUESS, ORCHIDEE, SiB-3, and SiB-CASA. All models were wrapped in a software framework driven with common forcing data, spin-up, and run protocols specified by the Multi-scale Synthesis and Terrestrial Model Intercomparison Project (MsTMIP) for years 1901–2100. We ran more than a dozen model experiments. We identify three major benefits and three major challenges. The benefits include: (a) processing multiple models through a MIP is relatively straightforward, (b) MIP protocols are run consistently across models, which may reduce some model output variability, and (c) unique multimodel experiments can provide novel output for analysis. The challenges are: (a) technological demand is large, particularly for data and output storage and transfer; (b) model versions lag those from the core model development teams; and (c) there is still a need for intellectual input from the core model development teams for insight into model results. A merger with the open-source, cloud-based Predictive Ecosystem Analyzer (PEcAn) ecoinformatics system may be a path forward to overcoming these challenges.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The changing nature of hydroclimatic risks across South Africa

We present results from large ensembles of projected twenty-first century changes in seasonal precipitation and near-surface air temperature for the nation of South Africa. These ensembles are a result of combining Monte Carlo projections from a human-Earth system model of intermediate complexity with pattern-scaled responses from climate models of the Coupled Model Intercomparison Project Phase 5 (CMIP5). These future ensemble scenarios consider a range of global actions to abate emissions through the twenty-first century. We evaluate distributions of surface-air temperature and precipitation change over three sub-national regions: western, central, and eastern South Africa. In all regions, we find that without any emissions or climate targets in place, there is a greater than 50% likelihood that mid-century temperatures will increase threefold over the current climate’s two-standard deviation range of variability. However, scenarios that consider more aggressive climate targets all but eliminate the risk of these salient temperature increases. A preponderance of risk toward decreased precipitation (3 to 4 times higher than increased) exists for western and central South Africa. Strong climate targets abate evolving regional hydroclimatic risks. Under a target to limit global climate warming to 1.5 °C by 2100, the risk of precipitation changes within South Africa toward the end of this century (2065–2074) is commensurate to the risk during the 2030s without any global climate target. Thus, these regional hydroclimate risks over South Africa could be delayed by 30 years and, in doing so, provide invaluable lead-time for national efforts to prepare, fortify, and/or adapt.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Consistent Timing of Arctic Permafrost Loss Across the CESM1 Large Ensemble

Abstract The Arctic is especially vulnerable to climate change and is warming faster than the global average. Changes in this region pose a heightened threat due to the immense amount of carbon frozen as organic material in the soil. When permafrost thaws, organic material decays and releases as greenhouse gases into the atmosphere, contributing to further warming. A better understanding of the processes that influence permafrost degradation is needed to inform climate adaptation and mitigation planning. This study assesses changes to Arctic permafrost across 35 ensemble member simulations from the Community Earth System Model 1 Large Ensemble Project, under the Representative Concentration Pathway 8.5 21st century scenario. Most Arctic near‐surface permafrost is lost by 2100, but timing varies across regions and with soil depth. Internal climate variability, represented by differences between ensemble members, has a constrained influence on degradation timing due to relative consistency of summer temperature increases and insulation by winter snow cover.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Seasonal modulation of crustal seismicity in northeastern Japan driven by snow load

Numerous studies have reported that surface hydrological loading can seasonally modulate seismicity rates at crustal depths. For example, substantial winter snow accumulation occurs across the Japanese Islands, and these snowy regions appear to have seasonally modulated the occurrence of previous large inland earthquakes. Therefore, it is important to investigate the impact of seasonal stress changes on crustal seismicity to deepen our understanding of earthquake generation. Here we constrain seasonal changes in the surface load across northeastern Japan using Global Navigation Satellite System surface displacements and evaluate the potential relationship between temporal trends in inland seismicity and estimated seasonal stress changes. The spatial distribution of the seasonal surface load is consistent with snow depth along the Sea of Japan. The inland seismicity beneath northeastern Japan is modestly modulated by the seasonal stress changes that are induced by the annual snow load. However, this seasonal response is weaker than that in other regions. This weak modulation may be due to the small surface-load-induced stress perturbation relative to the long-term-averaged stressing rate and/or the limited presence of crustal fluids to trigger seismicity in Japan.

58 GEOSCIENCES↗
DOE OSTI2023

Seasonal forecasting skill for the High Mountain Asia region in the Goddard Earth Observing System

Seasonal variability of the global hydrologic cycle directly impacts human activities, including hazard assessment and mitigation, agricultural decisions, and water resources management. This is particularly true across the High Mountain Asia (HMA) region, where availability of water resources can change depending on local seasonality of the hydrologic cycle. Forecasting the atmospheric states and surface conditions, including hydrometeorologically relevant variables, at subseasonal-to-seasonal (S2S) lead times of weeks to months is an area of active research and development. NASA's Goddard Earth Observing System (GEOS) S2S prediction system has been developed with this research goal in mind. Here, we benchmark the forecast skill of GEOS-S2S (version 2) hydrometeorological forecasts at 1–3-month lead times in the HMA region, including a portion of the Indian subcontinent, during the retrospective forecast period, 1981–2016. To assess forecast skill, we evaluate 2 m air temperature, total precipitation, fractional snow cover, snow water equivalent, surface soil moisture, and terrestrial water storage forecasts against the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) and independent reanalysis data, satellite observations, and data fusion products. Anomaly correlation is highest when the forecasts are evaluated against MERRA-2 and particularly in variables with long memory in the climate system, likely due to the similar initial conditions and model architecture used in GEOS-S2S and MERRA-2. When compared to MERRA-2, results for the 1-month forecast skill range from an anomaly correlation of R anom =0.18 for precipitation to R anom =0.62 for soil moisture. Anomaly correlations are consistently lower when forecasts are evaluated against independent observations; results for the 1-month forecast skill range from R anom =0.13 for snow water equivalent to R anom =0.24 for fractional snow cover. We find that, generally, hydrometeorological forecast skill is dependent on the forecast lead time, the memory of the variable within the physical system, and the validation dataset used. Overall, these results benchmark the GEOS-S2S system's ability to forecast HMA hydrometeorology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Characterization of Natural Consolidated Halloysite Nanotube Structures

Halloysite is a unique 1:1 clay mineral frequently appearing with nanotubular morphology, and having surfaces of different polarity with interesting and important technological applications. HNTs can be consolidated naturally in the earth by pressure and thermal flows. In this study of natural consolidated HNTs, the strength and hardness of these materials were found to be dependent on the presence of impurities (gibbsite, alunite, quartz, and other silica minerals), which accounted for the increased stability of such samples. In the absence of impurities, the strength of consolidated HNTs was significantly lower. The first 3D mapping of the pore structure of natural consolidated HNT is provided. The contributions of the porosity within the nanotubes and between the nanotubes were delineated using a combination of non-invasive ultra-small and small-angle X-ray scattering (USAXS/SAXS) analyses, BET/BJH pore size analyses, and computed tomography studies. A total porosity of 40%, as determined by X-ray attenuation and He porosimetry, was found for the natural consolidated HNTs, of which about one-third was due to the inter-HNT porosity. Nano-X-ray computed tomography (nano-XCT) analyses also indicated that 76% of the inter-HNT pores were smaller than 150 nm in diameter. The intra-HNT pore size determined by combined USAXS/SAXS and BET/BJH was about 10 nm. This pore network information is essential for the utilization of natural consolidated HNTs as a model geomaterial to investigate the effects of surface characteristics on confined fluid flow.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Searching for the origin of the rare-earth peak with precision mass measurements across Ce–Eu isotopic chains

A nuclear mass survey of rare-earth isotopes has been conducted with the Canadian Penning Trap mass spectrometer using the most neutron-rich nuclei thus far extracted from the CARIBU facility. Here, we present a collection of 12 nuclear masses determined with a precision of ≤ 10 keV/c 2 for Z = 58-63 nuclei near N = 100. Independently, a detailed study exploring the role of nuclear masses in the formation of the r-process rare-earth abundance peak has been performed. Employing a Markov chain Monte Carlo (MCMC) technique, mass predictions of lanthanide isotopes have been made which uniquely reproduce the observed solar abundances near A = 164 under three distinct astrophysical outflow conditions. We demonstrate that the mass surface trends thus far mapped out by our measurements are most consistent with MCMC mass predictions given an r process that forms the rare-earth peak during an extended (n, γ) ⇌ (γ, n) equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Benchmarking soil moisture and its relationship to ecohydrologic variables in Earth System Models

Soil moisture (SM) is a key regulator of ecosystem biogeophysics, influencing plant water relations and land-atmosphere energy exchanges. We evaluate the representation of SM in 16 Earth System Models from the Coupled Model Intercomparison Project Phase 6 (CMIP6) using the International Land Model Benchmarking (ILAMB) framework, focusing on surface (0–5, 0–10 cm) and rootzone (0–100 cm) depths, as well as key ecohydrological variables like gross primary productivity (GPP), leaf area index (LAI), and evapotranspiration (ET), and their coupling. Models are benchmarked against multiple observational and assimilated datasets to assess both state variables and cross-variable relationships. Surface SM is generally well represented (r > 0.87), while rootzone SM variability is systematically overestimated (normalized standard deviation > 1). ET shows strong agreement with observations (r > 0.9), whereas GPP and LAI exhibit larger inter-model spread. Skill in individual variables does not guarantee realistic SM–ecohydrology coupling, which varies strongly across models and depends on the reference dataset. Köppen-based regional analyses reveal strong regime dependence, with several models performing well in Tropical and Temperate regions but degrading in Continental (high-latitude) zones. Across both global and regional benchmarks, models cluster by land surface framework, indicating that structural choices in soil hydrology and soil–plant coupling exert a first-order control on performance. These results provide process-relevant benchmarks and suggest that improving the representation of vertical soil structure, rooting depth distributions, and soil–plant hydraulic coupling will be central to advancing soil moisture realism in next-generation Earth system models.

CMIP6↗
DOE OSTI2022

First-Principles Surface Characterization and Water Adsorption of Fe 3 P Schreibersite

We report the meteoritic mineral schreibersite, e.g., Fe 3 P, is a proposed abiotic source of phosphorus for phosphate ion (PO 4 – ) production, needed for nucleobases, phospholipids, and other life building materials. Schreibersite could have acted as both a source of elemental phosphorus and as a catalyst, and the hostile conditions on early Earth could have accelerated its degradation in different environments. Here, we present results from quantum calculations of bulk schreibersite and of its low Miller index surfaces. We also investigate water surface adsorption and identify possible dissociation pathways on the most stable facet. Our calculations provide useful chemical insights into schreibersite interactions in aqueous environments, paving the way for further detailed investigation on more reactive surfaces. Our results help provide a “bottom-up” understanding for phosphorylated organic synthesis on the primitive planet and its role in producing life building molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Assessing mechanical response of CO 2 storage into a depleted carbonate reef using a site-scale geomechanical model calibrated with field tests and InSAR monitoring data

Geomechanical risks of injection have raised concerns regarding secure CO 2 storage. In this work, a combined monitoring and modeling approach is used to assess the stress changes and surface uplift associated with CO 2 injection into a depleted carbonate reef of the Michigan basin. A site-scale geomechanical model is built by assigning mechanical properties of formations using well-log and experimental data. Gravity load is applied to the model to estimate the vertical component of stress as well as different lateral boundary displacement scenarios to estimate horizontal stresses. We used a poroelastic pressure-dependent model (instead of a linear elastic mechanical earth model) to calibrate initial stresses using hydraulic fracture test data measured at depleted reservoir status. Multi-phase fluid flow-geomechanical simulations are performed to estimate the poroelastic response during (1) primary depletion (2) field-scale CO 2 injection phase (3) a hypothetical forecast scenario in which well bottom hole pressure (BHP) reach 45000 KPa. The predicted surface uplift is less than 1 mm at the end of the field-scale CO 2 injection phase which is in good agreement with Interferometric Synthetic Aperture Radar (InSAR) uplift measurement. Although the InSAR data shows an insignificant uplift, hydromechanical modeling of injection shows that CO 2 injection still causes reservoir deformation emphasizing the role of carbonate overburden and reservoir formation mechanical properties and limited size of reef on diminishing the surface deformation. Modeling indicates poroelastic response of caprock matters to estimate uplift. The lower permeability of the top two layers provides additional barrier to large uplift. Also, history of subsidence due to production should be accounted to predict uplift due to a follow up injection correctly. This report shows the significance of combining a calibrated geomechanical model with field measured stresses and monitoring data to be used as a tool to ensure the safety of CO 2 storage.

42 ENGINEERING↗
DOE OSTI2023

Advances in solar forecasting: Computer vision with deep learning

Renewable energy forecasting is crucial for integrating variable energy sources into the grid. It allows power systems to address the intermittency of the energy supply at different spatiotemporal scales. To anticipate the future impact of cloud displacements on the energy generated by solar facilities, conventional modeling methods rely on numerical weather prediction or physical models, which have difficulties in assimilating cloud information and learning systematic biases. Augmenting computer vision with machine learning overcomes some of these limitations by fusing real-time cloud cover observations with surface measurements acquired from multiple sources. This Review summarizes recent progress in solar forecasting from multisensor Earth observations with a focus on deep learning, which provides the necessary theoretical framework to develop architectures capable of extracting relevant information from data generated by ground-level sky cameras, satellites, weather stations, and sensor networks. Overall, machine learning has the potential to significantly improve the accuracy and robustness of solar energy meteorology; however, more research is necessary to realize this potential and address its limitations.

14 SOLAR ENERGY↗
DOE OSTI2021

The Oceanic Barrier Layer in the Eastern Indian Ocean as a Predictor for Rainfall Over Indonesia and Australia

Barrier layers in the tropics trap heat in a shallow and stable near-surface layer and limit entrainment of cooler water from below. Both processes act to increase sea surface temperature and enhance atmospheric convection. The high resolution fully coupled pre-industrial Energy Exascale Earth System Model version 0 (E3SMv0) is used to investigate the relationship between barrier layers in the eastern Indian Ocean during the wet season with local atmospheric convection and remote rainfall. A partial least squares regression reveals a significant relationship between Australasian rainfall and the barrier layer thickness (BLT) west of Sumatra, occurring one month earlier. Furthermore, the largest positive regression coefficients are over northern Australia. The region west of Sumatra is strategically located where the East-Asian monsoon moisture flows toward northern Australia. Thickening of the west Sumatra BLT intensifies evaporation and local convection and amplifies the moisture transported to Australia acting to increase the terrestrial rainfall.

58 GEOSCIENCES↗