Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Thermal diffusivity determination using heterodyne phase insensitive transient grating spectroscopy

The elastic and thermal transport properties of opaque materials may be measured using transient grating spectroscopy (TGS) by inducing and monitoring periodic excitations in both reflectivity and surface displacement. The “phase grating” response encodes both properties of interest, but complicates quantitative analysis by convolving temperature dynamics with surface displacement dynamics. Hence, thermal transport characteristics are normally determined using the “amplitude grating” response to isolate the surface temperature dynamics. Yet, this signal character requires absolute heterodyne phase calibration and contains no elastic property information. Here, a method is developed by which phase grating TGS measurements may be consistently analyzed to determine thermal diffusivity with no prior knowledge of the expected properties. To demonstrate this ability, the wavelength-dependent 1D effective thermal diffusivity of pure germanium is measured using this type of response and found to be consistent with theoretical predictions made by solving the Boltzmann transport equation. This ability to determine the elastic and thermal properties from a single set of TGS measurements will be particularly advantageous for new in situ implementations of the technique being used to study dynamic materials systems.

36 MATERIALS SCIENCE↗

Robust and Elastic Polymer Membranes with Tunable Properties for Gas Separation

Here, polymer membranes with the capability to process a massive volume of gas are especially attractive for practical applications of gas separation. Although much effort has been devoted to develop novel polymer membranes with increased selectivity, the overall gas-separation performance and lifetime of membrane are still negatively affected by the weak mechanical performance, low plasticization resistance and poor physical aging tolerance. Recently, elastic polymer membranes with tunable mechanical properties have been attracting significant attentions due to their tremendous potential applications. Herein, we report a series of urethanerich PDMS-based polymer networks (U-PDMS-NW) with improved mechanical performance for gas separation. The cross-link density of U-PDMS-NWs is tailored by varying the molecular weight ( M n ) of PDMS. The U-PDMS-NWs show up to 400% elongation and tunable Young’s modulus (1.3–122.2 MPa), ultimate tensile strength (1.1–14.3 MPa), and toughness (0.7–24.9 MJ/m 3 ). All of the U-PDMS-NWs exhibit salient gas-separation performance with excellent thermal resistance and aging tolerance, high gas permeability (>100 Barrer), and tunable gas selectivity (up to α[ P CO 2 / P N 2 ] ≈ 41 and α[ P CO 2 / P CH 4 ] ≈ 16). With well-controlled mechanical properties and gas-separation performance, these U-PDMS-NW can be used as a polymermembrane platform not only for gas separation but also for other applications such as microfluidic channels and stretchable electronic devices.

36 MATERIALS SCIENCE↗

Ultrahigh elastically compressible and strain-engineerable intermetallic compounds under uniaxial mechanical loading

Intermetallic compounds possess unique atomic arrangements that often lead to exceptional material properties, but their extreme brittleness usually causes fracture at a limited strain of less than 1% and prevents their practical use. Thus, it is critical for them to exhibit either plasticity or some form of structural transition to absorb and release a sufficient amount of mechanical energy before failure occurs. This study observes that the ThCr 2 Si 2 -structured intermetallic compound (CaFe 2 As 2 ) and a hybrid of its structure (CaKFe 4 As 4 ) with 2 μm in diameter and 6 μm in height can exhibit superelasticity with strain up to 17% through a reversible, deformation-induced lattice collapse, leading to a modulus of resilience orders of magnitude higher than that of most engineering materials. Such superelasticity also can enable strain engineering, which refers to the modification of material properties through elastic strain. Density functional theory calculations and cryogenic nanomechanical tests predict that superconductivity in CaKFe 4 As 4 could be turned on/off through the superelasticity process, before fracture occurs, even under uniaxial compression, which is the favorable switching loading mode in most engineering applications. Our results suggest that other members with the same crystal structure (more than 2500 intermetallic compounds) and substitution series based on them should be examined for the possibility of manifesting similar superelastic and strain-engineerable functional properties.

36 MATERIALS SCIENCE↗

Alkyl-Substituted Polycaprolactone Poly(urethane-urea)s as Mechanically Competitive and Chemically Recyclable Materials

We report the mechanical performance and chemical recycling advantages of implementing alkyl-substituted poly(ε-caprolactones) (PCLs) as soft segments in thermoplastic poly(urethane-urea) (TPUU) materials. Poly(4-methylcaprolactone) (P4MCL) and poly(4-propylcaprolactone) (P4PrCL) were prepared, reacted with isophorone diisocyanate, and chain-extended with water to form TPUUs. The resulting materials’ tensile properties were similar or superior to a commercially available polyester thermoplastic poly(urethane) and had superior elastic recovery properties compared to a PCL analogue due to the noncrystalline nature of P4MCL and P4PrCL. Additionally, monomers were recovered from the TPUU materials in high yields via ring-closing depolymerization using a reactive distillation approach at an elevated temperature and a reduced pressure (240–260 °C, 25–140 mTorr) with zinc chloride (ZnCl 2 ) as the catalyst. The thermodynamics of polymerization were estimated using Van’t Hoff analyses for 4MCL and 4PrCL; these results indicated that the propyl group in 4PrCL results in a lower practical ceiling temperature (T c ) for P4PrCL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled Geomechanical Modeling to Assess Cap Rock Integrity and Mechanical Fault Stability: Application to Farnsworth Field Unit Project

Abstract The SWP project is located in a mature waterflood undergoing conversion to CO2-WAG operations in the Farnsworth, Texas, USA. Anthropogenic CO2 is sourced from a fertilizer and an ethanol plant. This work utilizes Farnsworth’s full-field, history-matched, compositional hydrodynamic coupled geomechanical model for assessing the impact of stress changes observed through the history matched field life. Production and injection induced stress changes, fault stability and caprock integrity investigations are performed to project the potential for fault reactivation and the loss of caprock integrity under shear failure. A static mechanical earth model (MEM) was constructed for use in transient coupled geomechanical model based on the existing Southwest Regional Partnership (SWP) geological model. The static MEM inherits the stratigraphic and structural features of the geologic model and incorporates additional overburden, underburden, and sideburden formations required to impose mechanical boundary conditions. Mechanical properties were distributed in the 3D MEM through integration of geophysical logs and 3-dimensional seismic elastic inversion properties using a combination of Bayesian and stochastic interpolation methods. These data are further enhanced by lab derived strength and failure criteria for the caprock interval. Additionally, interpreted faults and other geological features were included as part of the static structural framework to fully represent subsurface hydraulic and mechanical systems and appropriately integrate heterogeneity. Two-way coupling of hydrodynamic flow and geomechanical simulations incorporates the Kozeny-Carman relationship for updating permeability and is history matched through primary, secondary (waterflooding) and tertiary (CO2 WAG) recovery periods before performing a twenty year forecast. Two-way simulations are performed to understand the effective stress perturbations imposed by field operations: water injection and the more recent implementation of WAG. Evaluation of Mohr circles with liquid production and field pressure charts as well as slip tendency and distance to failure metrics indicate that neither our faults or cap rock are critically stressed. This paper presents the results of the Farnsworth initial attempts to integrate the seismic driven 3D MEM into coupled hydrodynamic geomechanical history match simulation workflow.

02 PETROLEUM↗

Stresses and deformations in angle-ply composite tubes

The stress and deformations in angle-ply composite tubes subjected to axisymmetric thermal loading were investigated both experimentally and analytically. For the theoretical portion a generalized plane strain elasticity analysis was developed. The analysis included mechanical and thermal loading, and temperature-dependent material properties. The elasticity analysis was also used to study the effect of including a thin metallic coating on a graphite-epoxy tube. The stresses in the coatings were found to be quite high, exceeding the yield stress of aluminum. An important finding in the analytical studies was the fact that even tubes with a balanced-symmetric lamination sequence exhibit shear deformation, or twist. For the experimental portion an apparatus was developed to measure torsional and axial response in the temperature range of 140 to 360 K. Eighteen specimens were tested, combining three material systems, eight lamination sequences, and three off-axis ply orientation angles. For the twist response, agreement between analysis and experiment was found to be good. The axial response of the tubes tested was found to be greater than predicted by a factor of three. As a result, it is recommended that the thermally induced axial deformations be investigated, both experimentally and analytically.

Rousseau, Carl Q.↗

Influence of extended exposure in space on mechanical properties of high-toughness graphite-epoxy composite material (A0019)

Graphite-epoxy composites are promising candidates for structural use in space vehicles because of their high strength and elastic modulus properties. The problem of low fracture toughness was solved by use of recently developed techniques of intermittent interlaminar bonding. Before this material can be adapted for space use, however, confidence must be gained that its mechanical properties are not degraded by exposure to the space environment. The objective of this experiment is to test the effect of extended exposure to a space environment on the mechanical properties of a specially toughened T300/5208 graphite-epoxy composite material. Specimens made by recently developed techniques of intermittent interlaminar bonding will be exposed and afterward tested for fracture toughness, tensile strength, and elastic modulus. The approach of this experiment is to provide a frame on which the specimens can be mounted with their flat sides normal to the Long Duration Exposure Facility radius, each specimen with an unobstructed exposure of about 2 pi sr. The specimens will be mounted so that they neither fracture from high stress nor fail from excessive heating during launch and return.

Felbeck, D. K.↗

Oxynitride glass fibers

Research at the Army Materials Technology Laboratory (AMTL) and elsewhere has shown that many glass properties including elastic modulus, hardness, and corrosion resistance are improved markedly by the substitution of nitrogen for oxygen in the glass structure. Oxynitride glasses, therefore, offer exciting opportunities for making high modulus, high strength fibers. Processes for making oxynitride glasses and fibers of glass compositions similar to commercial oxide glasses, but with considerable enhanced properties, are discussed. We have made glasses with elastic moduli as high as 140 GPa and fibers with moduli of 120 GPa and tensile strengths up to 2900 MPa. AMTL holds a U.S. patent on oxynitride glass fibers, and this presentation discusses a unique process for drawing small diameter oxynitride glass fibers at high drawing rates. Fibers are drawn through a nozzle from molten glass in a molybdenum crucible at 1550 C. The crucible is situated in a furnace chamber in flowing nitrogen, and the fiber is wound in air outside of the chamber, making the process straightforward and commercially feasible. Strengths were considerably improved by improving glass quality to minimize internal defects. Though the fiber strengths were comparable with oxide fibers, work is currently in progress to further improve the elastic modulus and strength of fibers. The high elastic modulus of oxynitride glasses indicate their potential for making fibers with tensile strengths surpassing any oxide glass fibers, and we hope to realize that potential in the near future.

Patel, Parimal J.↗

The Effect of Bismuth on the Structural Perfection and the Luminescent Properties of Thin-Film Elastically Stressed Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb Heterostructures

The effect of bismuth on the structural perfection and the luminescent properties of Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb heterostructures has been studied. The optimal parameters of the process of zone recrystallization with temperature gradient at which epitaxial AlInGaBiSb layers have the minimum roughness and high structural perfection have been revealed: temperature gradient 1 ≤ G ≤ 30 K/cm, the liquid zone thickness 60 ≤ l ≤ 100 μm, the temperature range 773 K ≤ T ≤ 873 K, and bismuth concentration 0.3–0.4 mol fraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Machine Learning Approaches to Predicting Induced Seismicity and Imaging Geothermal Reservoir Properties

This project developed machine learning (ML) methods, lab data sets, and field data to advance geothermal exploration and geothermal energy production. The work had three focus areas. One involved the development of ML methods to use microearthquakes (MEQs) for imaging geothermal reservoir properties and improving subsurface characterization – most importantly the evolution of permeability within the evolving reservoir. This part of the work included development of ML approaches for automated MEQ location, focal mechanism determination and identification of earthquake precursors. The second area focused on using MEQ signals generated by geothermal exploration and production to predict the relationship between fluid injection and seismicity. Here, we extended to reservoir scale our success in using ML to predict laboratory earthquakes and fault zone stress state. The third focus area was on lab experiments. Here, we developed new ML models for lab earthquake prediction and identification of precursors to failure to improve earthquake forecasting and early warning in geothermal settings. Major outcomes of our work include ML models that learn from MEQ signals during geothermal exploration and production to predict induced seismicity. MEQs occur naturally in connection with drilling and energy production. We developed ML methods to use the seismic waves from these events to characterize the elastic, hydraulic and poromechanical properties of reservoirs. Our work illuminated fracture geometry and the evolution of fracture permeability by incorporating seismic coda wave analysis and ML methods to relate fluid injection and seismicity. We significantly expanded laboratory earthquake prediction to include methods that use both passive measurements of microearthquakes within the lab fault zones and also active source acoustic measurements of fault zone elastic properties. These methods can now predict fault zone stress state, time to failure and the magnitude of lab earthquakes. Our work showed that repetitive stick- slip failure events during frictional sliding (the lab equivalent of earthquakes) are preceded by a cascade of micro-failure events that radiate energy in a manner that foretells unstable failure – manifest as laboratory MEQs. We documented a mapping between fracture properties and statistical attributes of elastic radiation. We extended existing works to geothermal reservoir scale and developed ML methods to determine reservoir permeability, fracture properties, and their evolution during geothermal energy production. An attractive feature of ML algorithms is their ability to handle big datasets and reveal patterns and correlations that may remain invisible to conventional analyses. Our work connected data from field, laboratory and intermediate scales to study permeability, stress, strength, fracture stiffness and geometry. At the field scale we used data from the Newberry Volcano field site, UtahFORGE, EGS Collab, and also the Bedretto underground research lab in Switzerland. These data sets are bridging the gap between the lab scale, theory, and reservoir scale. Our work produced plain language summaries to improve public understanding of DOE research. We also developed openly distributed ML and seismicity datasets for use by all researchers and we published connections between induced seismicity in geothermal areas and reservoir properties including permeability, fracture properties, and stress state. Our models are designed for the large data sets of induced seismicity typically associated with geothermal sites. We produced labeled event catalogs and used them on geothermal data to assess how ML can facilitate geothermal production and exploration. All datasets are available on the GDR Productivity: The project produced 32 publications in peer reviewed journals (two are in review). It supported the work of 6 PhD students, 40 conference presentations, 6 keynote talks at national meetings, and mentoring and professional development for 4 postdoctoral fellows.

15 GEOTHERMAL ENERGY↗

Indentation-derived elastic modulus of multilayer thin films: Effect of unloading induced plasticity

Nanoindentation is useful for evaluating the mechanical properties, such as elastic modulus, of multilayer thin film materials. A fundamental assumption in the derivation of the elastic modulus from nanoindentation is that the unloading process is purely elastic. In this work, the validity of elastic assumption as it applies to multilayer thin films is studied using the finite element method. The elastic modulus and hardness from the model system are compared to experimental results to show validity of the model. Plastic strain is shown to increase in the multilayer system during the unloading process. Additionally, the indentation-derived modulus of a monolayer material shows no dependence on unloading plasticity while the modulus of the multilayer system is dependent on unloading-induced plasticity. Lastly, the cyclic behavior of the multilayer thin film is studied in relation to the influence of unloading-induced plasticity. Furthermore, it is found that several cycles are required to minimize unloading-induced plasticity.

36 MATERIALS SCIENCE↗

Postseismic rebound due to creep of the lower lithosphere and asthenosphere

Postseismic surface deformations are attributed to the inelastic flow of the subcrustal regions of the Earth following an earthquake. A multilayer representation of the Earth's rheological properties is used in conjunction with a finite element computational scheme to calculate time dependent displacements and strains subsequent to a strike slip earthquake. The deviatoric stress strain relations for the uppermost layer is assumed elastic. Lower layers are assumed to be, in order of increasing depth, a standard, linear, three element, viscoelastic solid; a linear viscoelastic fluid; and another elastic solid. Physically these layers correspond to the upper lithosphere, lower lithosphere, asthenosphere, and lower mantle, respectively. Elastic dilatational properties are assumed throughout. Appreciable postseismic displacements, possibly approaching meters, for large earthquakes, arise from viscoelastic relaxation following sudden coseismic slip. Furthermore, compared to the simpler case of an elastic lithosphere over a viscoelastic asthenosphere and the near fault postseismic shear, strain is increased, by a factor of two or more in some cases, by the presence of a viscoelastic lower lithosphere. Also, the duration of postseismic straining is increased by the relatively slow relaxation of this layer.

Cohen, S. C.↗

SU-F-BRF-01: A GPU Framework for Developing Interactive High-Resolution Patient-Specific Biomechanical Models

Purpose: To develop a GPU-based framework that can generate highresolution and patient-specific biomechanical models from a given simulation CT and contoured structures, optimized to run at interactive speeds, for addressing adaptive radiotherapy objectives. Method: A Massspring-damping (MSD) model was generated from a given simulation CT. The model's mass elements were generated for every voxel of anatomy, and positioned in a deformation space in the GPU memory. MSD connections were established between neighboring mass elements in a dense distribution. Contoured internal structures allowed control over elastic material properties of different tissues. Once the model was initialized in GPU memory, skeletal anatomy was actuated using rigid-body transformations, while soft tissues were governed by elastic corrective forces and constraints, which included tensile forces, shear forces, and spring damping forces. The model was validated by applying a known load to a soft tissue block and comparing the observed deformation to ground truth calculations from established elastic mechanics. Results: Our analyses showed that both local and global load experiments yielded results with a correlation coefficient R{sup 2} > 0.98 compared to ground truth. Models were generated for several anatomical regions. Head and neck models accurately simulated posture changes by rotating the skeletal anatomy in three dimensions. Pelvic models were developed for realistic deformations for changes in bladder volume. Thoracic models demonstrated breast deformation due to gravity when changing treatment position from supine to prone. The GPU framework performed at greater than 30 iterations per second for over 1 million mass elements with up to 26 MSD connections each. Conclusions: Realistic simulations of site-specific, complex posture and physiological changes were simulated at interactive speeds using patient data. Incorporating such a model with live patient tracking would facilitate real time assessment of variations of the actual anatomy and delivered dose for adaptive intervention and re-planning.

60 APPLIED LIFE SCIENCES↗

Analysis of structure-property gradients in orthogonally machined chips and workpiece subsurface

Production of machined surfaces with optimized mechanical properties requires fundamental process-structure-property knowledge. In this paper, we focus on structure-property gradients in orthogonally cut OFHC Copper chips and the workpiece subsurface. We utilize orientation imaging microscopy and statistical spatial correlation metrics to quantify the microstructure. Constitutive elastic-plastic properties of the workpiece subsurface and chips are measured using spherical nanoindentation. Analysis of the data reveals significant structure and property gradients in both regions. Differences and similarities in structure and property gradients near the workpiece surface and tool-chip interface, and in the chip middle are discussed and explained.

42 ENGINEERING↗

Target Soil Impact Verification: Experimental Testing and Kayenta Constitutive Modeling.

This report details experimental testing and constitutive modeling of sandy soil deformation under quasi - static conditions. This is driven by the need to understand constitutive response of soil to target/component behavior upon impact . An experimental and constitutive modeling program was followed to determine elastic - plastic properties and a compressional failure envelope of dry soil . One hydrostatic, one unconfined compressive stress (UCS), nine axisymmetric compression (ACS) , and one uniaxial strain (US) test were conducted at room temperature . Elastic moduli, assuming isotropy, are determined from unload/reload loops and final unloading for all tests pre - failure and increase monotonically with mean stress. Very little modulus degradation was discernable from elastic results even when exposed to mean stresses above 200 MPa . The failure envelope and initial yield surface were determined from peak stresses and observed onset of plastic yielding from all test results. Soil elasto - plastic behavior is described using the Brannon et al. (2009) Kayenta constitutive model. As a validation exercise, the ACS - parameterized Kayenta model is used to predict response of the soil material under uniaxial strain loading. The resulting parameterized and validated Kayenta model is of high quality and suitable for modeling sandy soil deformation under a range of conditions, including that for impact prediction.

54 ENVIRONMENTAL SCIENCES↗

Mechanical Model Development for Composite Structural Supercapacitors

Novel composite structural supercapacitor concepts have recently been developed as a means both to store electrical charge and to provide modest mechanical load carrying capability. Double-layer composite supercapacitors are often fabricated by impregnating a woven carbon fiber fabric, which serves as the electrodes, with a structural polymer electrolyte. Polypropylene or a glass fabric is often used as the separator material. Recent research has been primarily limited to evaluating these composites experimentally. In this study, mechanical models based on the Multiscale Generalized Method of Cells (MSGMC) were developed and used to calculate the shear and tensile properties and response of two composite structural supercapacitors from the literature. The modeling approach was first validated against traditional composite laminate data. MSGMC models for composite supercapacitors were developed, and accurate elastic shear/tensile properties were obtained. It is envisioned that further development of the models presented in this work will facilitate the design of composite components for aerospace and automotive applications and can be used to screen candidate constituent materials for inclusion in future composite structural supercapacitor concepts.

Micromechanics↗