Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Description”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Cold-air annular-cascade investigation of aerodynamic performance of core-engine-cooled turbine vanes. 1: Solid-vane performance and facility description

The aerodynamic performance of a solid (uncooled) version of a core engine cooled stator vane was experimentally determined in a full-annular cascade, where three-dimensional effects could be obtained. The solid vane, which serves as a basis for comparison with subsequent cooled tests, was tested over a range of aftermixed critical velocity ratios of 0.57 to 0.90. Overall vane aftermixed efficiencies were obtained over this critical velocity ratio range and compared with results from a two-dimensional cascade. The variation in vane efficiency and aftermixed flow conditions with circumferential and radial position were obtained and compared with design values. Vane surface static-pressure distributions were also measured and compared with theoretical results.

Goldman, L. J.↗
NASA NTRS1974

Examination of the influence of coatings on thin superalloy sections. Volume 1: Description and analysis

The effects of an aluminide coating and of section thickness were investigated on two cast nickel-base superalloys. Cast section thickness ranged from 0.038 cm to 0.15 cm. Simulated engine exposures in a jet fuel burner rig with cyclic air cooling were studied. The effects of surface machining before coating and re-machining and re-coating after exposures were examined. The properties evaluated included tensile strength, stress rupture, high-cycle mechanical fatigue, and thermal fatigue. A metallurgical analysis was made of the microstructures of the coated and uncoated alloy.

Kaufman, M.↗
NASA NTRS1972

Ames Heat Pipe Experiment (AHPE) experiment description document

A gas-controlled variable-conductance heat pipe was qualified for flight aboard orbiting astronomical observatory (OAO3). Experiments were conducted to determine the performance and reliability of the pipe in the vacuum environment of space, and to demonstrate in a specific engineering application its effectiveness in providing temperature stability for spacecraft equipment which experiences varying electronic duty cycles and changing thermal boundary conditions. System design and hardware are discussed in detail.

Marcus, B. D.↗
NASA NTRS1975

Prediction of unsteady aerodynamic loadings caused by leading edge and trailing edge control surface motions in subsonic compressible flow: Computer program description

A digital computer program has been developed to calculate unsteady loadings caused by motions of lifting surfaces with leading edge or trailing edge controls based on the subsonic kernel function approach. The pressure singularities at hinge line and side edges have been extracted analytically as a preliminary step to solving the integral equation by collocation. The program calculates generalized aerodynamic forces for user supplied deflection modes. Optional intermediate output includes pressure at an array of points, and sectional generalized forces. From one to six controls on the half span can be accommodated.

Redman, M. C.↗
NASA NTRS1975

Skylab vectorcardiograph: System description and in flight operation

A vectorcardiograph system was used to measure cardiac electrical activity of Skylab crewmen. This system was chosen because of its data-quantification advantages. The vectorcardiograph was required to meet recommended American Heart Association specifications, to withstand space environmental extremes, and to facilitate data gathering in the weightless environment. The vectorcardiograph system performed without failure, and all projected data were acquired. The appendix lists the design specifications used for the Skylab vectorcardiograph system.

Lintott, J.↗
NASA NTRS1974

A general description of Loran-C: Present and potential applications

Loran-C is a low frequency (100 kHz) pulse navigation system. The pulse format and phase stability of the system are of paramount importance for both navigation and time synchronization using this system. Present Loran-C installations operated by the U. S. Coast Guard cover much of the northern hemisphere. A recent government-wide decision has declared that Loran-C will be the U. S. Coastal confluence navigation system for the immediate future. Therefore, Loran-C stations are presently being installed or planned to cover the entire U. S. coastline.

Doherty, R. H.↗
NASA NTRS1975

The 4D area navigation system description and flight test results

A 4D area navigation system was designed to guide aircraft along a prespecified flight path (reference path) such that the aircraft would arrive at the approach gate at a time specified by the ATC controller. Key components to achieve this requirement were: (1) stored reference trajectories; (2) a continuously recomputed capture trajectory to a selected waypoint on the reference trajectory so as to achieve the desired time of arrival; (3) electronic situation displays; and (4) a control system to follow the overall trajectory in space and time. The system was implemented in a digital integrated avionics system (STOLAND) installed on a CV-340 airplane. Although the 4D system was designed primarily for automatic operation, it was flight tested in a flight director mode (the pilot follows the flight director commands), because the CV-340 autopilot servos were not tied to the avionics system. The flight test showed that, even in the flight director mode, the pilot did achieve the objectives of path tracking and time of arrival control with only moderate workload. The system also permitted controlled delay of the time of arrival by path stretching, which takes advantage of the continuously changing capture trajectory to predict the time of arrival. Simulations in the automatic and manual modes were used to complement the flight data.

Lee, H. Q.↗
NASA NTRS1975

Kinetic description of ionospheric dynamics in the three-fluid approximation

Conservation equations are developed in the three-fluid approximation for general application problems of ionospheric dynamics in the altitude region 90 km to 800 km for all geographic locations. These equations are applied to a detailed study of auroral E region neutral winds and their relationship to ionospheric plasma motions.

Comfort, R. H.↗
NASA NTRS1975

Multifluids description of dynamics of upper atmosphere

A multifluids model to investigate ionospheric dynamics was established on kinetic theory. Its resultant equations are used to examine the following dynamic problems in the gamma region of 80-2000 Km of the ionosphere: (1) propagation of acoustic modes in the 500-2,000 Km of the ionosphere (two fluid model); (2) the relation between the cross field plasma drift instabilities and type I and type II ionospheric irregularities; and (3) time dependent neutral wind structure and horizontal pressure gradient.

Wu, S. T.↗
NASA NTRS1975

A description and some measured acoustic characteristics of the Langley 220 cubic meter reverberation chamber

An initial acoustic calibration was performed for the NASA Langley Research Center reverberation chamber located on the aircraft Noise Reduction Laboratory. The physical characteristics of the chamber and measured data for the ambient acoustic levels, reverberation times, reflection coefficients, the spatial uniformity of acoustic energy as measured in the 1/3-octave bands from 40 Hz to 10 KHz and acoustic power levels of a standard source are described. Measured power levels compared very well with those published for the ILG standard source. The measured data indicate that for broadband noise fields, the reverberation room has acceptable acoustic performance in the frequency range from 100 Hz to 8 KHz.

Mueller, A. W.↗
NASA NTRS1975

Description and test results of a water basin to determine ground effect in hover using small models

A water basin test facility was established capable of measuring forces and moments of small models of VTOL aircraft, simulating hover in and out of ground effect. Because the models and the operation of the facility are inexpensive, the water basin is particularly suitable for testing the relative characteristics of a great number of model configurations for preliminary design development. Results from a variety of models are given. Lift, pitching moments, and rolling moments are given with and without engine failure simulation in ground effect, and with and without pitched and banked conditions.

Renselaer, D. J.↗
NASA NTRS1975

Theoretical description of the diimide molecule

The N2H2 molecule is only metastable and as a consequence is not well characterized experimentally. Therefore, we have carried out extensive Hartree-Fock calculations in order to determine equilibrium geometries, one-electron properties, and the relative energies of the cis and trans isomers. In addition, Hartree-Fock and multiconfiguration calculations were carried out to determine the mechanism for isomerization. The trans isomer was found to be 6.6 kcal/mole more stable than the cis form using a basis set which included polarization functions. The lowest energy path found for isomerization occurred by inversion about one nitrogen (rather than rotation about the NN bond) with an activation energy of 47 kcal/mole. Excitation energies for the lowest singlet and triplet excited states are also presented.

Winter, N. W.↗
NASA NTRS1975

Acquisition and description of Mariner 10 television science data at Mercury

The Mariner 10 television science subsystem was an improved version of the Mariner 9 system, using 1500-mm-focal-length optics. An elaborate picture-taking sequence resulted in transmission of over 4000 frames back to earth during two flyby encounters with Mercury. These sequences utilized a real-time data rate of 117.6 kbit/s, resulting in coverage of about 75% of the lighted portion of Mercury's surface at a resolution of better than 2 km. The complete set of useful images, which amounted to about 3000 frames, was processed with three different types of digital image-processing enhancements.

Danielson, G. E., Jr.↗