Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISULFIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Materials Data on Ti3S4 by Materials Project

Ti3S4 is Cyanogen Chloride-derived structured and crystallizes in the trigonal P3m1 space group. The structure is one-dimensional and consists of one hydrogen disulfide molecule; one TiS cluster; and one Ti2S ribbon oriented in the (0, 0, 1) direction. In the TiS cluster, Ti+2.67+ is bonded in a single-bond geometry to one S2- atom. The Ti–S bond length is 2.10 Å. S2- is bonded in a single-bond geometry to one Ti+2.67+ atom. In the Ti2S ribbon, there are two inequivalent Ti+2.67+ sites. In the first Ti+2.67+ site, Ti+2.67+ is bonded in a distorted single-bond geometry to one Ti+2.67+ and one S2- atom. The Ti–Ti bond length is 1.94 Å. The Ti–S bond length is 2.26 Å. In the second Ti+2.67+ site, Ti+2.67+ is bonded in a distorted linear geometry to one Ti+2.67+ and one S2- atom. The Ti–S bond length is 2.26 Å. S2- is bonded in a linear geometry to two Ti+2.67+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on H4S4N by Materials Project

NH4S2(S)2 crystallizes in the monoclinic C2/m space group. The structure is zero-dimensional and consists of eight hydrogen disulfide molecules and two NH4S2 clusters. In each NH4S2 cluster, N3+ is bonded in a tetrahedral geometry to four H1+ atoms. There are a spread of N–H bond distances ranging from 1.03–1.08 Å. There are four inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one N3+ atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one N3+ atom. In the third H1+ site, H1+ is bonded in a single-bond geometry to one N3+ and one S+1.75- atom. The H–S bond length is 2.10 Å. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one N3+ atom. There are two inequivalent S+1.75- sites. In the first S+1.75- site, S+1.75- is bonded in a 2-coordinate geometry to one H1+ and one S+1.75- atom. The S–S bond length is 1.96 Å. In the second S+1.75- site, S+1.75- is bonded in a distorted trigonal non-coplanar geometry to three S+1.75- atoms. There are one shorter (2.20 Å) and one longer (3.13 Å) S–S bond lengths.

36 MATERIALS SCIENCE↗

Materials Data on CS30 by Materials Project

S30C crystallizes in the monoclinic C2/m space group. The structure is zero-dimensional and consists of twelve hydrogen disulfide molecules, eight hydrogen sulfide molecules, two CS2 clusters, and eight S clusters. In each CS2 cluster, C4+ is bonded in a linear geometry to two equivalent S+0.13- atoms. Both C–S bond lengths are 1.55 Å. S+0.13- is bonded in a single-bond geometry to one C4+ atom. In each S cluster, there are three inequivalent S+0.13- sites. In the first S+0.13- site, S+0.13- is bonded in a single-bond geometry to two S+0.13- atoms. There are one shorter (1.90 Å) and one longer (3.69 Å) S–S bond lengths. In the second S+0.13- site, S+0.13- is bonded in a single-bond geometry to two S+0.13- atoms. The S–S bond length is 3.85 Å. In the third S+0.13- site, S+0.13- is bonded in a 1-coordinate geometry to two S+0.13- atoms.

36 MATERIALS SCIENCE↗

Materials Data on S by Materials Project

S is gamma nitrogen-like structured and crystallizes in the tetragonal P4_2/m space group. The structure is zero-dimensional and consists of two hydrogen disulfide molecules. S is bonded in a single-bond geometry to one S atom. The S–S bond length is 1.89 Å.

36 MATERIALS SCIENCE↗

Materials Data on S by Materials Project

S is Cubic alpha N2-like structured and crystallizes in the monoclinic P2/m space group. The structure is zero-dimensional and consists of two hydrogen disulfide molecules. S is bonded in a single-bond geometry to one S atom. The S–S bond length is 1.90 Å.

36 MATERIALS SCIENCE↗

Materials Data on CaSnS3 by Materials Project

CaSn(S)3 crystallizes in the monoclinic C2 space group. The structure is zero-dimensional and consists of four 7440-31-5 molecules, four calcium molecules, four hydrogen disulfide molecules, and four hydrogen sulfide molecules.

36 MATERIALS SCIENCE↗

Decommissioning of the Remediation Systems at Waverly, Nebraska, in 2011-2012

The Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) operated a grain storage facility in Waverly, Nebraska, from 1952 to 1974. During this time, the grain fumigant '80/20' (carbon tetrachloride/carbon disulfide) was used to preserve stored grain. In 1982, sampling by the U.S. Environmental Protection Agency (EPA) found carbon tetrachloride contamination in the town's groundwater. After an investigation of the contaminant distribution, the site was placed on the National Priority List (NPL) in 1986, and the CCC/USDA accepted responsibility for the contamination. An Interagency Compliance Agreement between the EPA and the CCC/USDA was finalized in May 1988 (EPA 1990). The EPA (Woodward-Clyde Consultants, contractor) started immediate cleanup efforts in 1987 with the installation of an air stripper, a soil vapor extraction system, a groundwater extraction well, and groundwater and soil gas monitoring wells (Woodward-Clyde 1986, 1988a,b). After the EPA issued its Record of Decision (ROD; EPA 1990), the CCC/USDA (Argonne National Laboratory, contractor) took over operation of the treatment systems. The CCC/USDA conducted a site investigation (Argonne 1991, 1992a,b), during which a carbon tetrachloride plume in groundwater was discovered northeast of the former facility. This plume was not being captured by the existing groundwater extraction system. The remediation system was modified in 1994 (Argonne 1993) with the installation of a second groundwater extraction well to contain the contamination further. Subsequently, a detailed evaluation of the system resulted in a recommendation to pump only the second well to conserve water in the aquifer (Argonne 1995). Sampling and analysis after implementation of this recommendation showed continued decreases in the extent and concentrations of the contamination with only one well pumping (Argonne 1999). The CCC/USDA issued quarterly monitoring reports from 1988 to 2009. Complete documentation of the CCC/USDA characterization and remediation efforts, including the quarterly monitoring reports, is on the compact disc inside the back cover of this report. The EPA reported on the progress of the remediation systems in a series of five-year reviews (EPA 1993, 1999, 2004, 2009). These reports and other EPA documentation are also on the compact disc inside the back cover of this report, along with the Woodward-Clyde (1986, 1988a,b) documentation cited. Starting in 2006, the analytical results for groundwater (the only medium still being monitored) showed no carbon tetrachloride concentrations above the maximum contaminant level (MCL) of 5.0 g/L. Because the cleanup goals specified in the ROD (EPA 1990) had been met, the EPA removed the site from the NPL in November 2006 (Appendix A). In 2008 the National Pollutant Discharge Elimination System (NPDES) permit for the remediation system was deactivated, and a year later the EPA released its fourth and final five-year report (EPA 2009), indicating that no further action was required for the site and that the site was ready for unlimited use. In 2011-2012, the CCC/USDA decommissioned the remediation systems at Waverly. This report documents the decommission process and closure of the site.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of MoS 2 -Au nanocomposite films by sputter deposition

Molybdenum disulfide based solid lubricants, which are well known for their lubricating behavior in dry and inert atmospheres, oxidize in humid environments. This study focuses on the synthesis of Au doped MoS 2 nanocomposite thin films created by co-sputter deposition at various temperatures for environmental robustness. The ratio of the deposition flux was adjusted to control the composition to about 10% Au by weight.

Goeke, Ronald S.↗

Development of Modified Pag (Polyalkylene Glycol) High VI High Fuel Efficient Lubricant for LDV Applications

Engine oils play a critical role in friction reduction. Improvements in engine oil technology steadily improved fuel economy as the industry moved through ILSAC GF-1 to GF-5 specifications. These improvements were influenced by changes in base oil chemistry, development of new friction modifiers and their treat levels, and the total additive package consisting of various other components. However, the improvements are incremental and further fuel consumption reduction opportunities are becoming more challenging. Polyalkylene glycol (PAG) based engine oils are being explored as a step forward for significant fuel consumption reduction. Although PAG fluids are used in many industrial applications, its application as an engine oil has been explored in a limited way. The objective of this project is to deep dive in exploring the applicability of PAG technology in engine oil, understanding the benefits, and limitations, elucidating the mechanism(s) for friction benefits, if any, and finally recommending how to address any limitations. The project was designed in four steps, starting with selection of lubricant technology, followed by friction and wear evaluations in laboratory bench tests which are relatively simple and inexpensive and also served as a screener for further evaluation. Selected formulations were chosen for more complex engine component level tests i.e., motored valvetrain friction and wear, piston ring friction using a motored single cylinder, and motored engine tests. A couple of formulations were further selected based on component level tests for engine dyno tests i.e., Sequence VID (ASTM D6709) for fuel economy, Sequence IVA (ASTM D6891) for valvetrain wear, and Sequence VG (ASTM D6593) for sludge and varnish protection. These are some of the industry standard tests required for qualifying engine oils. Out of these tests, a single PAG oil was selected for chassis roll dynamometer tests for fuel economy and emission measurements using FTP (Federal Test Procedure) metro/highway cycles. Five different PAG chemistries were selected by varying the starting alcohol, the oxide monomers (ethylene oxide, propylene oxide, or butylene oxide), capped or uncapped, homopolymer or random copolymer. All formulations contained a proprietary additive package and one which contained additional antiwear and friction modifier additives. Laboratory bench tests (Pin-on-Disk, High Frequency Reciprocating Rig (HFRR), Block-on-Ring, Mini-Traction Machine (MTM) identified formulations having friction, wear, and load carrying characteristics similar to or better than baseline GF-5 SAE 5W-20 oil. Motored valvetrain and motored piston ring friction tests showed nearly 50% friction reduction for some of the PAG formulations compared to GF-5 SAE 5W-20 oil. Motored engine tests showed up to 15% friction benefit over GF-5 SAE 5W-20 oil. It was observed that friction benefits are more related to PAG base oil chemistry than their lower viscosity compared to GF-5 SAE 5W-20 oil. Analysis of wear surfaces from laboratory bench tests and bucket tappets from motored valvetrain tests confirmed the presence of PAG molecules. The adsorption of these polar molecules is believed to be reason for friction reduction. However, the wear surfaces also had thin tribo-film derived from additive components. The tribo-film consisting of phosphates, sulfides, and molybdenum disulfide (when molybdenum additive was present) were observed for both GF-5 SAE 5W-20 and PAG fluids. However, when using PAG fluids, motored valvetrain tests showed high initial wear, which is believed to be due to delay in protective tribo-film formation. After the initial wear, the wear rate of PAG fluids was comparable to GF-5 SAE 5W-20 oil. The PAG oil containing additional antiwear and friction reducing additives showed low initial wear as expected. However, when this oil was evaluated in Sequence IVA test, it showed initially low wear comparable to GF-5 oil but wear accelerated with oil aging indicating rapid deterioration of additive components. ASTM Sequence VG test showed good sludge protection capability but failed to meet varnish rating for GF-5 requirement. Chassis roll dynamometer tests with PAG oil 15-1 showed about 1% fuel economy benefit over GF-5 SAE 5W-20 oil in EPA city cycles only and when the oil was slightly aged (500 miles). No fuel economy benefits could be observed in combined EPA metro/highway cycles. Also, no fuel economy benefit could be observed with continued (500- 10000 miles) oil aging. However, the emission level was comparable to the reference oil and was within EPA limits. Analysis of the PAG oil following tests showed low iron content although additive components were significantly degraded. The results indicate that PAG fluids have significant friction reduction potential but there are challenges with wear and varnish protection capabilities. These limitations are primarily because the selected additive components were chosen to provide a fluid with no metal content that forms little or no sulphated ash. Significant development work is needed to identify additive components compatible with PAG chemistry including their solubility in PAG oil. Miscibility of PAG fluids with mineral base oil is another challenge for oil change service. There is PAG chemistry (oil soluble PAG, OSP) which is soluble in mineral oils but the formulation explored in this investigation did not show significant friction reduction in motored engine tests. Again, highlighting the need for additive development for specific PAG chemistry. The thermal oxidation behavior of these oils has not been explored in this investigation and needs attention.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Targeting Maturation and Quality Control of Photosynthetic Membrane Proteins

Plsp1 is a type I signal peptidase that is responsible for removing the targeting signal peptide from passenger proteins upon their delivery to the thylakoid lumen. Plsp1 is itself a resident of the thylakoid membrane, with a single membrane anchor and the catalytic domain facing the lumen. Work to uncover the targeting mechanism for this protein has been underway in the Inoue lab from the previous DOE funding period has established that Plsp1 is targeted at the thylakoid by the Sec1 translocase, and that it passes through a high molecular weight intermediate in the stroma en route to the thylakoid membrane. During this funding period we have demonstrated by MS/MS of immunoprecipitated samples that the high molecular weight complex containing Plsp1 in the stroma contains primarily the α1 and β1 forms of Cpn60 in approximately equal amounts. Mixing experiments with overexpressed purified proteins have reproduced the Cpn60/Plsp1 complex. Surprisingly, the co-chaperonins Cpn10 and Cpn20 were not detected in the immunoprecipitated sample, even though they are able to bind to the Cpn60/Plsp1 complex formed in mixing experiments. We have further confirmed that the addition of purified stromal cpSecA1 results in a decrease in the amount of Plsp1 successfully incorporated into the thylakoid membrane. We are currently working on experiments to describe the conditions for the handoff between Cpn60 and cpSec1 in the stroma prior to membrane targeting. The structure of Plsp1 can be inferred by threading its sequence onto the structure of its E. coli homologue LepB to contain a single membrane anchor followed by a soluble structure consisting of ten β strands. In the last DOE funding period it was determined that the transmembrane domain not only acts as the membrane anchor, but probably mediates the interaction with cpSecA1. We have now determined that the binding to Cpn60 is likely mediated by β strands 1 and 2. What is the mechanism and significance of oxidative folding of Plsp1? It was found during the last DOE funding period that Plsp1 purified after overexpression in E. coli loses its peptidase activity upon reduction of its conserved cysteines. We have now determined that Plsp1 undergoes a measurable conformational change upon reduction, both by monitoring susceptibility to protease and by native tryptophan fluorescence. We have also shown that Plsp1 is at least partly, and likely completely, oxidized in the thylakoid lumen. While these results were not unexpected, experiments on Plsp1 in vivo were completely surprising. We have known for years (from work conducted with prior DOE funding) that a Plsp1 knockout is embryo lethal. Accordingly, given that reduction of the isolated protein inactivates it, we expected that plants in which one or both of the cysteine pair were mutated would also lead to a severe mutant phenotype. This was not observed, and in fact, these mutants complemented fully the plsp1 plants. This lead to the hypothesis that either association with an interacting protein or with the membrane preserves Plsp1structure even when the disulfides are reduced. Work performed in the last DOE funding cycle revealed that Pgrl1, a protein reportedly involved in cyclic electron flow, interacts stably with Plsp1. However, the Plsp1 cysteine-less mutants are still able to compliment the plsp1 mutant even in the pgrl1 knockout mutant background. We have also found that in vitro activity of Plsl1 is not abolished by reduction in thylakoids that have been permeabilized by low concentrations of detergent, whereas the activity of fully extracted protein is. This points to membrane association as the condition important to activity, and by extension, structure preservation. We are presently working to isolate Plsp1 in a lipid nanodisk to test this hypothesis.

59 BASIC BIOLOGICAL SCIENCES↗

Polymer Composites Reinforced by Carbon-Allotrope Fillers for Selective Laser Sintering (SLS) - A Review

The limited commercial availability of applicable polymer powders has hindered the widespread implementation of SLS as a legitimate manufacturing method. This is partly due to the mechanism of SLS, which requires powders to meet rigid specifications if processing is to be successful. Furthermore, powders that do meet requirements are often incapable of producing quality, high-performance parts. Academic and industrial research has focused on composite development to overcome this problem. The incorporation of fillers including calcium carbonate, molybdenum disulfide, and aluminum have all been found to influence the processing behavior of PA12 powder and ultimately, the properties of the final part.3-5 Here, the thermal and mechanical properties of sintered composite parts produced using polymer powders reinforced by various carbon-based fillers is discussed.

36 MATERIALS SCIENCE↗

Understanding Topological Pseudospin Transport in Van Der Waals' Materials

Because of symmetry, crystals often have degenerate valleys in the conduction or the valence band. This “valley” degree of freedom, similar to electronic charge and spin, has been proposed as an information carrier for new classes of electronic and optoelectronic devices. The basic requirement of information processing is to be able to create and manipulate a flow of valley pseudospin, i.e. valley pseudospin current. Valley pseudospin currents have been demonstrated in recent experiments in monolayer molybdenum disulfide and graphene on hexagonal boron nitride. However, the key fundamental questions regarding the nature of valley pseudospin transport remain open. This project will investigate the importance of Berry curvature effects in valley pseudospin transport and explore regimes for quantized valley Hall conductivity and pure valley pseudospin currents. The study will rely on combined optical and electrical transport techniques to create, manipulate and detect valley pseudospin currents in two-dimensional (2D) van der Waals’ materials of hexagonal structure. The insights provided by this research will deepen the understanding of valley pseudospin transport in 2D and help the development of novel valley-based technologies.

36 MATERIALS SCIENCE↗

Controlling Structural, Electronic, and Energy Flow Dynamics of Catalytic Processes through Tailored Nanostructures

MoS 2 (molybdenum disulfide) is a highly-versatile catalyst material for support of numerous reactions from hydrodesulfurization and denitrogenation to the focus of this renewal proposal: hydrogenation of CO/CO 2 towards (higher) alcohols. At the same time, MoS 2 is a non-toxic, environmentally-benign and rather inert material- which under ambient conditions for some time has served as a lubricant and, more recently, as next-generation electronic material. The apparent contrast between inertness and stability in ambient, and catalytic activity under reactive conditions is puzzling and calls for a synergistic theoretical and experimental investigation with the long-term objective of enabling the rational design of MoS 2 -based catalysts for alcohol-formation reactions by providing a microscopic understanding of the environmental factors that determines site activity and selectivity. Our research project seeks answers to the questions (a) what conformation does MoS 2 adopt under reaction conditions (as opposed to that under ultrahigh vacuum and low temperatures)?; (b) what reaction pathways exist on such a material?; (c) how can the local environment of the active sites be manipulated so as to make MoS 2 an efficient catalyst for production of higher alcohol from syngas? In particular, research strategies will explore how the basal plane composed of sulfur atoms can be activated so as to exhibit a reactivity of its own, by addressing three research targets and building on extensive preliminary and enabling work: (1) vacancies and vacancy aggregates on the basal plane; (2) non-local catalyst transformation through alkali doping, hydrogenation and phase transition; (3) fabrication of a metal-nanoparticle-activated MoS 2 system, in which particle anchoring, reactive sites and pathways as well as selectivity are controlled by design, as an example of predictive development of a catalyst material,. All strategies are directed to improve the efficacy of the key reactive sites and selectivity of chemical pathways by design, to replace the inefficient methodology of trial and error in catalyst development. This research project represents a synergistic combination of computational guidance, foundational surface-science-based experiments and validation under reactive conditions that aims at transformative new insights into the working of MoS 2 -based hydrogenation-catalysts, a topic squarely at the center of the interest of DOE BES. Guided and led by Talat Rahman, a computational physicist, this project will apply density functional theory to understand structure, reaction pathways and chemical potentials associated with MoS 2 -based CO/CO 2 hydrogenation, augmented by kinetic Monte Carlo methods for reaction rates and prefactors as well as ab-initio molecular dynamics for evaluation of thermal stability. Complementary experimental input and validation will originate from co-PI Ludwig Bartels, a physical chemist and materials scientist, whose group focuses on local imaging and preparation of MoS 2 materials, from co-PI Peter Dowben, an experimental physicist, whose group is expert in the spectroscopy of occupied and unoccupied electronic states, and from senior collaborator Michael White of Brookhaven National Laboratory, whose group generates high-resolution electronic and activity information on size-selected well-defined metal chalcogenide clusters. This collaborative effort will enable a comprehensive understanding of the correlation of structural integrity and catalytic activity of MoS 2 in forms ranging from extended films to individual particles with known geometries and binding sites. Alcohol formation from syngas is a rapidly emerging application that has great potential through facile, economic, and decentralized biomass gasification. CO 2 activation is one of the most pressing concerns of our time: increasing CO 2 levels in the atmosphere change the climate and expose the globe to environmental transformations with the potential for enormous economic and societal impact. We will investigate CO/CO 2 hydrogenation via an interdisciplinary research collaboration with established synergy – one that, in accordance with the mission of the DOE, involves accredited Hispanic-Serving Institutions and that, through student exchange with international collaborators and National Labs, will directly benefit a broad spectrum of communities and generate human resources in sciences essential to their future.

2D materials↗

Impact of Radiation on the Electronic Structure of MoS 2

Electrons in a semiconductor occupy states within certain energy ranges, called energy bands. The position of the Fermi level with respect to these energy bands determines the charge carrier type of the semiconductor. Molybdenum disulfide (MoS 2 ) is a two-dimensional, n-type semiconductor with potential applications in flexible electronics, transparent electronics, and optoelectronics. Electronic devices containing MoS 2 could be used in environments where radiation affects device performance. Thus, it is important to determine the impact of radiation on MoS 2 . A one-molecule-thick layer of MoS 2 (monolayer) and a two-molecule-thick layer of MoS 2 (bilayer) were placed onto different areas of a gold (Au) substrate containing 1.2-µm-deep holes. The MoS 2 was suspended over these holes but supported by the Au elsewhere on the substrate. This sample configuration was used to determine the effect of He + radiation on the electronic properties of the suspended MoS 2 and the Au-supported MoS 2 . The MoS 2 was irradiated by He+ ions in two stages. The energy bands of the MoS 2 were measured with respect to the Fermi level via photoelectron emission microscopy before irradiation and after each irradiation stage. From each measurement, the charge carrier type of the MoS 2 after the corresponding irradiation stage was determined. The Fermi levels of the suspended monolayer and bilayer decreased by ≈0.15 eV with respect to the bands during the first irradiation stage During the second irradiation stage, however, the Fermi levels didn’t change significantly. This lack of change supports the existence of a radiation threshold, above which the electronic properties of suspended MoS 2 remain the same. The Fermi levels of the supported monolayer and bilayer increased over the cumulative irradiation and didn’t show evidence of a threshold. Thus, suspended MoS 2 becomes less n-type as it is irradiated. Supported MoS 2 , however, becomes more n-type as it is irradiated. These results could inform the development of radiation tolerance standards for MoS 2 , and thus, radiation-tolerant MoS 2 -based electronics.

36 MATERIALS SCIENCE↗

Tritium Producing Burnable Absorber Rod (TPBAR) Cutterhead Test Report

The Tritium Extraction Facility (TEF) Target Rod Preparation (TRP) Tritium Producing Burnable Absorber Rod (TPBAR) Cutterhead is a specialized remote tubing cutter used to breach TPBARs (approximately 0.381 inch outside diameter x 0.336 inch inside diameter 316 stainless steel tubing). The cutterhead was originally designed by an external engineering firm - RTS Wright Industries. The bearing housing and drive plate, the main drive components, are designed to be fabricated from Nitronic 60, an anti-galling stainless steel, and coated with Dicronite® (Tungsten Disulfide) lubricating coating. These parts have galled after a limited number of cycles, damaging the fine 3.25-32 UN threads which drive the system. In some cases, destructive sectioning is required to remove the failed parts from the cutterhead. Cutterheads have been fabricated by multiple machine shops, with some cutterheads failing very quickly and some lasting more than 1,000 cuts. In 2019, Emery Corporation, now Toner Machining Technologies (TMT) was contracted to fabricate four (4) new complete sets of cutterheads. The newly fabricated cutterheads have not been able to pass the required acceptance test without the bearing housing and drive plate threads galling. TMT has tried multiple sets of Nitronic 60 bearing housing and drive plates; all have galled after less than 10 cuts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mesoscale fractal whey protein particles derived from microscale linear-shaped protein assemblies (Part 1): Manufacturing method and particle characteristics

Whey protein isolates (WPI) are widely used in processed foods for their versatile functional properties. Modifying the structural properties of proteins by assembling them into mesoscale or microscale particles may improve their functionality and broaden their applications. This study aims to manufacture and characterize mesoscale whey protein particles (WPP) derived from WPI. Two types of WPP, WPP1 (0.05 mL/min) and WPP2 (0.25 mL/min), were prepared through a multistep approach involving liquid antisolvent (LAS) precipitation, heat treatment, and microfluidization. Liquid antisolvent precipitation was performed by injecting a 20% (wt/vol) WPI dispersion (pH 7) into an ethanol-glycerol mixture (75:25, vol/vol) under laminar flow, followed by heat treatment at 80°C for 20 min as a particle hardening step. This process produced stable fiber- and ribbon-shaped whey protein assemblies (WPA), which served as precursors to WPP. Subsequent microfluidization (150 MPa, 6 passages) reduced the size of WPA, yielding mesoscale WPP with irregular morphologies and a more uniform size distribution, as revealed by microscopy and dynamic light scattering. ζ-Potential and fluorescence labeling indicated higher surface charge and surface hydrophobicity of WPP compared with untreated WPI. The WPP showed internal mass fractal and surface fractal structures at larger length scales, analyzed using small-angle X-ray scattering. Fourier transform infrared spectroscopy demonstrated an increased fraction of intermolecular β-sheets in WPP, suggesting that hydrogen bonding contributed to their formation. Gel electrophoresis confirmed that disulfide bonds served as the primary cross-links stabilizing the WPP structure. Furthermore, turbidity measurements showed that WPP exhibited superior colloidal phase stability compared with untreated WPI and maintained high colloidal stability under both acidic and neutral pH conditions.

Antisolvent precipitation↗

The Induction of Recombinant Protein Bodies in Different Subcellular Compartments Reveals a Cryptic Plastid-Targeting Signal in the 27-kDa γ-Zein Sequence

Naturally occurring storage proteins such as zeins are used as fusion partners for recombinant proteins because they induce the formation of ectopic storage organelles known as protein bodies (PBs) where the proteins are stabilized by intermolecular interactions and the formation of disulfide bonds. Endogenous PBs are derived from the endoplasmic reticulum (ER). Here, we have used different targeting sequences to determine whether ectopic PBs composed of the N-terminal portion of mature 27 kDa γ-zein added to a fluorescent protein could be induced to form elsewhere in the cell. The addition of a transit peptide for targeting to plastids causes PB formation in the stroma, whereas in the absence of any added targeting sequence PBs were typically associated with the plastid envelope, revealing the presence of a cryptic plastid-targeting signal within the γ-zein cysteine-rich domain. The subcellular localization of the PBs influences their morphology and the solubility of the stored recombinant fusion protein. Our results indicate that the biogenesis and budding of PBs does not require ER-specific factors and therefore, confirm that γ-zein is a versatile fusion partner for recombinant proteins offering unique opportunities for the accumulation and bioencapsulation of recombinant proteins in different subcellular compartments.

60 APPLIED LIFE SCIENCES↗