Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composite models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Roadmap for thermal property measurements of Molten Salt Reactor systems

Thermal properties of molten salts, both with and without fissile and fertile material, are fundamental to modeling and simulation that supports design, construction, operation, and accident progression evaluation of molten salt reactors. This roadmap provides guidance to the research community on the types and amounts of required data for base, or carrier, salt systems, recommends simulated burnup fuel salt compositions to evaluate, and provides a technical foundation for a focused salt property evaluation matrix. The property values generated from both computation and experimental methods are used to develop models that constitute the Molten Salt Thermal Properties Database (MSTDB). While the building blocks of MSTDB are fundamental in nature, its data facilitates constructing engineering models that allow stakeholders to investigate the behavior of specific compositions of interest and supports broader modeling and simulation of MSRs through coupling to multi-physics, multi-scale mass accountancy tools.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Aerosol Thermodynamics (Aerosol Liquid Water Concentration and Aerosol pH) at S2 during CoURAGE

These data report aerosol liquid water content (ALWC) and aerosol pH for the S2 (Mt. Airy) site during CoURAGE for April - June 2025. The ISORROPIA-II aerosol thermodynamic equilibrium model was used to compute ALWC and pH. The model was run in forward mode, with solids formation disabled (metastable mode), according to Pye et al. (Atmospheric Chemistry and Physics, 2020). Information about the model can be found at https://www.epfl.ch/labs/lapi/models-and-software/isorropia/, and in Fountoukis and Nenes (Atmospheric Chemistry and Physics, 2007). Inputs to the model were: (1) measured Temperature and relative humidity, both from the DoE ARM “metwxt” data products at S2, (2) aerosol chemical composition from the ARM ACSM, and (3) gas-phase ammonia concentrations. For ISORROPIA-II, ambient RH values above 0.995 were input to the model as 0.995; therefore, caution should be exercised interpreting ALWC when RH was above 0.995. Aerosol composition or NH3(g) concentrations below the LOD were input into the model as 0.5*LOD. Model runs were only conducted for data points at 30-min resolution with all three inputs (meteorology, ACSM, and NH3). If any of the three model inputs were missing, aerosol thermodynamic outputs are flagged as -999. Similarly, aerosol thermodynamic outputs are flagged as -999 if measured NH3(g) and aerosol ammonium (NH4+) were simultaneously below the respective LODs. The ALWC includes liquid water from inorganic aerosol components, calculated directly by ISORROPIA-II, as well as liquid water from organics, estimated from the ACSM organics assuming a kappa value of 0.12 according to Guo et al. (Atmospheric Chemistry and Physics, 2015).

Aerosol Liquid Water Content↗
DOE OSTI2024

Selective phosphate removal with manganese oxide composite anion exchange membranes in membrane capacitive deionization

The discharge of excessive phosphorous into water bodies can lead to serious eutrophication threatening aquatic ecosystem. Membrane capacitive deionization (MCDI) is an effective platform for deionizing aqueous streams; however, conventional MCDI is unable to selectively remove targeted ions from a liquid mixture. Here, in this work, we fabricated manganese oxide composite anion exchange membranes (AEMs) for MCDI to enhance phosphate removal selectivity from sodium chloride-sodium dihydrogen phosphate (10:1 M ratio) aqueous mixtures. We systematically investigated several critical factors, such as constant current or voltage operation, applied voltage amount, process stream pH, and manganese oxide (Mn 2 O 3 ) content in the AEM, on phosphate removal efficiency and phosphate selectivity. A trade-off was observed between phosphate removal and selectivity when increasing the cell voltage. Under the best conditions, a MCDI unit with a 20 wt% Mn 2 O 3 composite AEM and a bipolar membrane facilitated high phosphate removal efficiency of ≥ 31.8 % and a phosphate over chloride selectivity of 1.1 while showing stability for at least 30 cycles. To help understand how Mn 2 O 3 composite AEM boosts phosphate selectivity, static electronic structure calculations were performed, and they revelated that hydrogen phosphate absorption on Mn 2 O 3 composite AEM was 314 kcal/mol more exothermic than that on pristine AEM while chloride adsorption on Mn 2 O 3 composite AEM was 2.2 kcal/mol less exothermic than that on a pristine AEM. Overall, this work presents an effective strategy for selectively removing phosphate from model wastewater solutions and the mechanistic understanding that governs ion selectivity in composite ion-exchange membranes used in MCDI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Size dependence in chord characteristics from simulated and observed continental shallow cumulus

Abstract. In this study we compare long-term Doppler and Raman lidar observations against a full month of large eddy simulations of continental shallow cumulus clouds. The goal is to evaluate if the simulations can reproduce the mean observed vertical velocity and moisture structure of cumulus clouds and their associated subcloud circulations, as well as to establish if these properties depend on the size of the cloud. We propose methods to compare continuous chords of cloud detected from Doppler and Raman lidars with equivalent chords derived from 1D and 3D model output. While the individual chords are highly variable, composites of thousands of observed and millions of simulated chords contain a clear signal. We find that the simulations underestimate cloud size and fraction but successfully reproduce the observed structure of vertical velocity and moisture perturbations. There is a clear scaling of vertical velocity and moisture anomalies below the chords with chord size, but the moisture anomalies are only 1 %–2 % higher than the horizontal mean values. The differences between the observations and simulations are smaller than the difference in sampling the modeled chords in time or space. The shape of the vertical velocity and moisture anomalies from cloud chords sampled spatially from 3D model snapshots is almost perfectly symmetric. In contrast, the chords sampled temporally from the lidar observations and 1D model output have a marked asymmetry, with stronger updrafts and higher moisture anomalies occurring earlier on.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Prediction and Experimental Verification of Electrolyte Solvation Structure from an OMol25-Trained Interatomic Potential

A molecular-level understanding of electrolyte solvation structure and ion–ion correlations is critical to developing next-generation battery chemistries. Atomistic simulation capabilities with sufficient accuracy, speed, and transferability to deliver reliable structural insights while avoiding arduous system-specific reparameterization are thus highly desirable. Machine learning interatomic potentials (MLIPs) trained on large, chemically diverse data sets are revolutionizing computational chemistry, enabling molecular dynamics simulations of battery electrolytes with near-DFT accuracy over 10,000× faster than DFT. While previous MLIP training data sets with suitable elemental coverage for electrolytes have been based on inorganic materials, the Open Molecules 2025 (OMol25) data set provides large-scale molecular DFT MLIP training data with broad elemental coverage and specifically samples tens of millions of electrolyte configurations. Here, we integrate computational modeling with experimental validation to systematically assess the ability of large-scale MLIPs pretrained on materials data or on OMol25 to accurately resolve nanoscale structural organization and ion-solvation characteristics in Na-ion battery electrolytes across diverse physicochemical conditions and compositional regimes. We find that the OMol25-trained Universal Model of Atoms (UMA-OMol) predicts experimentally measured densities and X-ray structure factors in substantially better agreement compared to state-of-the-art models trained only on inorganic materials data. Using UMA-OMol, we further analyze systematic trends in solvation structure as a function of cation identity, anion chemistry, salt concentration, and solvent topology. We observe that increasing system temperature amplifies the heterogeneity within the solvation environment, perturbing cation–solvent interactions and promoting the formation of contact ion pairs (CIPs). Moreover, subtle variations in the solvent topology of glyme-based electrolytes cause pronounced changes in ion correlations and solvation structure. The experimental agreement and microscopic insights shown here position OMol25-trained MLIPs as a practical route to predictive, high-throughput electrolyte simulations beyond the limits of classical force fields and direct DFT molecular dynamics, serving as a powerful tool for accelerating the design of next-generation Na-ion battery electrolytes and beyond.

MLIPs↗
DOE OSTI2021

A Broad Grid of 2D Kilonova Emission Models

Depending upon the properties of their compact remnants and the physics included in the models, simulations of neutron star mergers can produce a broad range of ejecta properties. The characteristics of this ejecta, in turn, define the kilonova emission. To explore the effect of ejecta properties, we present a grid of 2-component 2D axisymmetric kilonova simulations that vary mass, velocity, morphology, and composition. The masses and velocities of each component vary, respectively, from 0.001 to 0.1 M ⊙ and 0.05 to 0.3c, covering much of the range of results from the neutron star merger literature. The set of 900 models is constrained to have a toroidal low electron fraction (Y e ) ejecta with a robust r-process composition and either a spherical or lobed high-Y e ejecta with two possible compositions. We simulate these models with the Monte Carlo radiative transfer code SuperNu using a full suite of lanthanide and 4th row element opacities. We examine the trends of these models with parameter variation, show how it can be used with statistical tools, and compare the model light curves and spectra to those of AT2017gfo, the electromagnetic counterpart of GW170817.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Interpretable machine learning-guided design of Fe-based soft magnetic alloys

Here, we present a machine learning (ML) guided approach to predict saturation magnetization (𝑀 S ) and coercivity (𝐻 C ) in Fe-rich soft magnetic alloys, particularly Fe-Si-B systems. ML models trained on experimental data reveal that increasing Si and B content reduces 𝑀 S from 1.81 T (DFT ≈ 2.04 T) to ≈1.54 T (DFT ≈ 1.56T) in Fe-Si-B, which is attributed to decreased magnetic density and structural modifications. Experimental validation of ML predicted magnetic saturation on Fe-1Si-1B (2.09 T), Fe-5Si-5B (2.01 T), and Fe-10Si-10B (1.54 T) alloy compositions further supports our findings. These trends are consistent with density functional theory predictions, which link increased electronic disorder and band broadening to lower 𝑀 S values. Experimental validation on selected alloys confirms the predictive accuracy of the ML model, with good agreement across compositions. Beyond predictive accuracy, detailed uncertainty quantification and model interpretability including through feature importance and partial dependence analysis reveal that 𝑀 S is governed by a nonlinear interplay between Fe content and early transition metal ratios, while 𝐻 C is more sensitive to processing conditions such as ribbon thickness and thermal treatment windows. The ML framework was further applied to Fe-Si-B/Cr/Cu/Zr/Nb alloys in a pseudoquaternary compositional space, which shows comparable magnetic properties to NANOMET (Fe 84.8 ⁢Si 0.5 ⁢B 9.4 ⁢Cu 0.8⁢ P 3.5 ⁢C 1 ), FINEMET (Fe 73.5 ⁢Si 13.5 ⁢B 9 Cu 1 ⁢Nb 3 ), NANOPERM (Fe 88 ⁢Zr 7⁢ B 4 ⁢Cu 1 ), and HITPERM (Fe 44 ⁢Co 44 ⁢Zr 7⁢ B 4 ⁢Cu 1 . Our findings demonstrate the potential of the ML framework for accelerated search of high-performance soft magnetic materials.

density functional theory↗
DOE OSTI2024

Assessment of Cementitious Composites for High-Temperature Geothermal Wells

High-temperature (HT) geothermal wells can provide green power 24 hours a day, 7 days a week. Under harsh environmental and operational conditions, the long-term durability requirements of such wells require special cementitious composites for well construction. This paper reports a comprehensive assessment of geothermal cement composites in cyclic pressure function laboratory tests and field exposures in an HT geothermal well (300–350 °C), as well as a numerical model to complement the experimental results. Performances of calcium–aluminate cement (CAC)-based composites and calcium-free cement were compared against the reference ordinary Portland cement (OPC)/silica blend. The stability and degradation of the tested materials were characterized by crystalline composition, thermo-gravimetric and elemental analyses, morphological studies, water-fillable porosity, and mechanical property measurements. All CAC-based formulations outperformed the reference blend both in the function and exposure tests. The reference OPC/silica lost its mechanical properties during the 9-month well exposure through extensive HT carbonation, while the properties of the CAC-based blends improved over that period. The Modified Cam-Clay (MCC) plasticity parameters of several HT cement formulations were extracted from triaxial and Brazilian tests and verified against the experimental results of function cyclic tests. These parameters can be used in well integrity models to predict the field-scale behavior of the cement sheath under geothermal well conditions.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Application of a Geochemically Informed Leak Detection (GILD) Model to CO 2 Injection Sites on the United States Gulf Coast

The Gulf Coast region possesses great potential for CO 2 enhanced oil recovery (EOR) and CO 2 storage. A geochemically informed leak detection (GILD) model has been applied to CO 2 injection sites on the Gulf Coast with considerations of measurement variability. The Jasper aquifer in Montgomery County, Texas, was chosen to demonstrate the method. Based on background data from wells in the area, combinations of mineral and fluid compositions were used to create 23 scenarios for the geochemical model. The output from the geochemical model was used to identify sensitive monitoring species, and response functions were generated for these as a function of the CO 2 leakage concentration. The sources of measurement variability for background conditions were characterized from the Jasper aquifer background data, and then normalized using the coefficient of variation of each species across the monitoring wells. Bayesian belief network (BBN) models were constructed, and measurement variability of different levels were added to compare leak detection probabilities. Increasing measurement variability decreased the power to detect a leak of a given size. For a moderately high CO 2 concentration of 0.2 mol/kg, the probability of detecting this leakage effect using pH as the monitoring variable in an aquifer with calcite decreases from 98% (no measurement variability) to 61% (medium variability) to 33% (high variability). The loss in power of the sampling protocol with increasing measurement variability is similar in magnitude when Ca 2+ or HCO 3 - is used as the monitoring parameter, but only for aquifers with calcite.

58 GEOSCIENCES↗
DOE OSTI2022

Effect of network connectivity on behavior of synthetic Broborg hillfort glasses

There is wide industrial interest in developing robust models of long-term (>100 years) glass durability. Archeological glass analogs, glasses of similar composition, and alteration conditions to those being tested for durability can be used to evaluate and inform such models. Two such analog glasses from a 1500-year-old vitrified hillfort near Uppsala, Sweden have previously been identified as potential analogs for low concentration Fe-bearing aluminosilicate nuclear waste glasses. However, open questions remain regarding the melting environment from which these historic glasses were formed and the effect of these conditions on their chemical durability. A key factor to answering the previous melting and durability questions is the redox state of Fe in the starting and final materials. Past work has shown that the melting conditions of a glass-forming melt may influence the redox ratio value (Fe +3 /ΣFe), a measure of a glass's redox state, and both melting conditions and the redox ratio may influence the glass alteration behavior. Synthetic analogs of the hillfort glasses have been produced using either fully oxidized or reduced Fe precursors to address this question. In this study, the melting behavior, glass transition temperature, oxidation state, network structure, and chemical durability of these synthesized glass analogs is presented. Resulting data suggests that the degree of network connectivity as impacted by the oxidation state of iron impacted the behavior of the glass-forming melt but in this case does not affect the chemical durability of the final glass. Glasses with a lower degree of melt connectivity were found to have a lower viscosity, resulting in a lower glass transition temperature and softening temperature, as well as in a lower temperature of foam onset and temperature of foam maximum. This lower degree of network connectivity most likely played a more significant role in accelerating the conversion of batch chemicals into glass than the presence of water vapor in the furnace's atmosphere. Future work will focus on using the results from this work with outcomes from other aspects of this project to evaluate long-term glass alteration models.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Magnetically driven coupling in relativistic radiation-mediated shocks

ABSTRACT The radiation drag in photon-rich environments of cosmic explosions can seed kinetic instabilities by inducing velocity spreads between relativistically streaming plasma components. Such microturbulence is likely imprinted on the breakout signals of radiation-mediated shocks. However, large-scale, transverse magnetic fields in the deceleration region of the shock transition can suppress the dominant kinetic instabilities by preventing the development of velocity separations between electron–positron pairs and a heavy ion species. We use a 1D five-fluid radiative transfer code to generate self-consistent profiles of the radiation drag force and plasma composition in the deceleration region. For increasing magnetization, our models predict rapidly growing pair multiplicities and a substantial radiative drag developing self-similarly throughout the deceleration region. We extract the critical magnetization parameter σc, determining the limiting magnetic field strength at which a three-species plasma can develop kinetic instabilities before reaching the isotropized downstream. For a relativistic, single ion plasma drifting with γu = 10 in the upstream of a relativistic radiation-mediated shock, we find the threshold σc ≈ 10−7 for the onset of microturbulence. Suppression of plasma instabilities in the case of multi-ion composition would likely require much higher values of σc. Identifying high-energy signatures of microturbulence in shock breakout signals and combining them with the magnetization limits provided in this work will allow a deeper understanding of the magnetic environment of cosmic explosions like supernovae, gamma-ray bursts, and neutron star binary mergers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

An FEM-Based Peridynamic Model for Failure Analysis of Unidirectional Fiber-Reinforced Laminates

To predict the mixed damage modes of unidirectional fiber-reinforced polymer (FRP) laminates under dynamic loading, an FEM-based peridynamic model is introduced in this paper. Based on its geometric structure and material composition, a long fiber lamina is considered a transversely isotropic medium as a result of homogenization at the meso-scale. The laminated structure is modeled by stacking surface mesh layers with arbitrary fiber angles along the thickness direction. The peridynamic bonds between Gauss points connect the separated elements. These bonds are classified as inner-layer bonds and inter-layer bonds. To represent the anisotropy of a laminate, the micro-elastic modulus of the inner-layer and inter-layer bonds is calculated from the anisotropic engineering material constants separately. To capture complex failure behaviors of laminate structures, an empirical damage model is proposed for the tension/ compression breakage of peridynamic bonds. This damage model can control the in-plane and delamination failure process. Finally, benchmark tests are conducted to validate the elastic response of laminates under dynamic loading. In terms of damage analysis, the proposed model can capture the complex damage modes and resistive force of laminate structures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Machine-learning-assisted deciphering of microstructural effects on ionic transport in composite materials: A case study of Li 7 La 3 Zr 2 O 12 -LiCoO 2

The effective diffusivity of ionic species in multiphase materials is critical for the design and function of composite materials for electrochemical energy storage. In practice, effective diffusivity depends sensitively not only on the intrinsic diffusivities of constituting materials but also on their topological arrangement; nevertheless, these coupled contributions are oversimplified in most analytical models. Here, we combine atomistically informed mesoscale modeling and machine learning (ML) analysis to unravel how such features affect effective diffusivity in two-phase composites. Using the Li 7 La 3 Zr 2 O 12 -LiCoO 2 composite solid-state battery cathode as a model system, we compute effective diffusivity for 600 distinct dense polycrystalline microstructures with different topological configurations of grains, grain boundaries, and heterointerfaces. We verify that in addition to atomic-scale variabilities, microstructural feature diversity can significantly impact effective transport properties. Across the ensemble of test microstructures, this often results in bimodal distributions of effective diffusivity that encompass two qualitatively distinct operating mechanisms, which we identify via flux analysis. An ML approach reveals that the most critical determining factors for effective diffusivity are the connectivity of bulk phases and their heterointerfaces. The role of ionic mobility at the heterointerfaces is also discussed. These insights highlight the combined importance of microstructure and interface engineering in tuning the transport properties of ionic species in composite materials. In conclusion, our framework can also be extended for understanding generic microstructure-property relationships in other complex multiphase materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Coverage, repulsion, and reactivity of hydrogen on High-Entropy alloys

Modeling hydrogen evolution reaction (HER) activity probability on IrPdPtRhRu(1 1 1) high-entropy alloys. Determining hydrogen coverages based on ligand effects and generalized hydrogen–hydrogen repulsion. The rate of H 2 formation is highly impacted by the level of hydrogen coverage on the catalyst surface. In search of optimal catalytic properties high-entropy alloys (HEA) are promising candidates that utilize the compositional space of multiple elements. Based on simulations of HEA model (1 1 1) surfaces with a range of hydrogen coverages, distributions of binding energies are used to construct a framework that approximates the probability that adsorbed hydrogen may lead to the formation of H 2 as a function of applied potential. By optimizing the alloy compositions for the highest activity probability at given potentials the best and most efficient catalyst candidates for HER can be identified. Treating hydrogen–hydrogen repulsion effects and binding energy separately, we find that the repulsion is larger for HEAs than for pure metals. Differing isotherm slopes in the mean adsorption and desorption energies demonstrate a possible hysteresis for hydrogen adsorption on HEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Leveraging Additive Manufacturing to Fabricate High Temperature Alloys With Co-Designed Mechanical Properties and Environmental Resistance

A paradigm shift in the traditional sequential design approaches is critically essential to create application-specific hierarchical and multifunctional materials with superior long-term performance for next-generation energy technologies involving extreme environments. In the current work, we aim to leverage the flexibility and geometric/compositional complexity offered by additive manufacturing to demonstrate this new approach by codesigning a compositionally graded Ni-based alloy for molten salts\sCO 2 heat exchangers to enable mitigation of environmental degradation of surfaces exposed to molten halide salts, while simultaneously suppressing the consequent deterioration in mechanical stability. Further, thermokinetic modeling describing the underlying physics of thermally- and environmentally induced spatiotemporal compositional and microstructural evolution will be employed to predict the parameter space of material deposition processes and precisely identify the required composition gradient. Preliminary corrosion and mechanical testing of the dual material demonstrated the potential of the material to replace existing solid solution strengthened materials for this application.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Looking through model medieval green glasses: From color to recipe

Abstract The colors of medieval stained glasses depend on their chemical composition. The redox interactions in glass between iron and copper and their influence on the color were investigated in two soda‐lime silicate model glasses. Both glasses have close iron and copper redox ratios and copper oxidizes iron when the iron content is smaller than the copper content. The redox speciation of iron and copper was determined using combining x‐ray and optical absorption spectroscopies in relation with the resulting color. The molar extinction coefficient of Cu 2+ was estimated from the combined analysis to be 32 mol/L/cm. The glass color change from green to blue‐green color is assigned to the decrease of the total iron content, confirming that ancient glassmakers could control the final color with the glass recipe. These results provide reference data for further spectroscopic investigations of medieval stained glasses. Comparison with ancient copper‐colored green glass compositions suggests that the higher ratio of copper to iron total contents was imposed by the more reducing melting conditions in medieval furnaces.

Hunault, Myrtille O. J. Y.↗
DOE OSTI2025

Effect of toolpath in large-format additive manufacturing with bio-derived composites

There has been growing interest in integrating bio-derived composites into Large-format additive manufacturing (LFAM) feedstocks to reduce the use of petroleum-derived materials and reduce the overall carbon footprint of LFAM. However, these materials present unique challenges during manufacturing due to their variability, which can lead to unintended deformations and failures attributable to suboptimal process conditions. While numerical modelling has been extensively employed to simulate numerous manufacturing processes, its application in LFAM with bio-derived composites remains limited. This study addresses this gap by systematically developing a numerical model to simulate the LFAM process using bio-based materials, specifically wood fiber-reinforced polylactic acid (PLA/WF). Experimental investigations were conducted to characterise the thermal and mechanical properties of additively manufactured PLA/WF specimens. Numerical simulations were performed to predict temperature profiles and deformations during LFAM. The effect of varying infill patterns, internal structures, and tool paths on the temperature distribution and deformation of printed parts was explored using the developed model. This article aims to advance the utilisation of bio-derived composites in LFAM systems and provide a comprehensive understanding of the LFAM process. The findings offer valuable insights for optimising process parameters and enhancing the performance of LFAM with bio-based composites.

Large-format additive manufacturing↗
DOE OSTI2020

Photoinduced phase separation in the lead halides is a polaronic effect

We present a perspective on recent observations of the photoinduced phase separation of halides in multi-component lead-halide perovskites. The spontaneous phase separation of an initial homogeneous solid solution under steady-state illumination conditions is found experimentally to be reversible, stochastic, weakly dependent on morphology, yet strongly dependent on composition and thermodynamic state. Regions enriched in a specific halide species that form upon phase separation are self-limiting in size, pinned to specific compositions, and grow in number in proportion to the steady-state carrier concentration until saturation. These empirical observations of robustness rule out explanations based on specific defect structures and point to the local modulation of an existing miscibility phase transition in the presence of excess charge carriers. A model for rationalizing existing observations based on the coupling between composition, strain, and charge density fluctuations through the formation of polarons is reviewed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗