Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Possible measurement of the coefficient of the second zonal harmonic of the sun's gravitational field with a solar probe

The use of radio tracking of a solar probe to estimate accurately the coefficient of the second zonal harmonic of the sun's gravitational field was examined. Preliminary results indicate that the coefficient can be estimated with a standard error of 10 to the minus 8th power or less, provided that the probe is equipped with a suitable drag-free system to compensate for the effects of non-gravitational accelerations. For signal paths that pass near the sun, dual-band ranging to the probe can provide the tracking accuracy needed to insure that the standard of error is equal to or less than 10 to minus 8th power. The possibility of achieving such accuracy with a single-band radio uplink and a dual-band downlink is discussed.

Reasenberg, R. D.↗

Determination of the N2 recombination rate coefficient in the ionosphere

Measurements of aeronomic parameters made by the Atmosphere Explorer-C satellite are used to determine the recombination rate coefficient of N2(+) in the ionosphere. The rate is found to increase significantly with decreasing electron density. Values obtained range from approximately 1.4 x 10 to the -7th to 3.8 x 10 to the -7th cu cm/sec. This variation is explained in a preliminary way in terms of an increase in the rate coefficient with vibrational excitation. Thus, high electron densities depopulate high vibrational levels reducing the effective recombination rate, whereas, low electron densities result in an enhancement in the population of high vibrational levels, thus, increasing the effective recombination rate.

Orsini, N.↗

On determining magnetospheric diffusion coefficients from the observed effects of Jupiter's satellite Io

A method is derived for determining the radial diffusion coefficient from observed satellite effects of the inner Jovian satellites on the energetic particle fluxes. The method is based on data from L values which are significantly removed from the actual sweeping region. With regard to the large losses to the protons at Io's L shell, it is suggested that in addition to satellite sweepup, the losses may be associated with an enhanced precipitation due to resonant interaction with ion cyclotron waves near Io's orbit. It is noted that such additional loss mechanisms may also apply to electrons, and that such losses may significantly affect the estimated diffusion coefficient.

Thomsen, M. F.↗

A parametric experimental study of the interference effects and the boundary-condition coefficient of slotted wind-tunnel walls

An experimental study of slotted upper and lower walls in a two-dimensional transonic wind tunnel with solid sidewalls is reported. Results are presented for several slot spacings and slot openness ratios. The experimental data are pressure measurements which were made on an airfoil model and on a sidewall near one of the slotted walls. The slotted-wall boundary-condition coefficient, which relates the pressure and streamline curvature near the wall, is determined from the wall pressure measurements. The measured wall-induced interference is correlated with the experimental values for the boundary-condition coefficient. This correlation is compared with theory.

Everhart, J. L.↗

Displacement coefficients along the inner boundaries of radially cracked ring segments subject to forces and couples

Displacement results of plane boundary collocation analysis are given for various locations on the inner boundaries of radially cracked ring segments (C-shaped specimens) subject to two complementary types of loading. Results are presented for ratios of outer to inner radius in the range of 1.1 to 2.5 and ratios a/W in the range 0.1 to 0.8, where a is the crack length for a specimen of wall thickness W. By combination of these results the resultant displacement coefficient or the corresponding influence coefficient can be obtained for any practical load line location of a pin-loaded specimen.

Gross, B.↗

Zr and Nb partition coefficients - Implications for the genesis of mare basalts, KREEP, and sea floor basalts

The distribution coefficients of Zr and Nb have been found between armalcolite, ilmenite, clinopyroxene, rutile, plagioclase, and a coexisting high-Ti mare basalt melt in the 1105-1128 C temperature range. Henry's Law is not broken over the compositional range evaluated. The distribution coefficients of clinopyroxene are strongly dependent on melt and crystal compositions. The Al2O3 activity in the melt is a strong controlling parameter. It is concluded that: (1) Apollo 11 (low K) and Apollo 17 high-Ti mare basalts may have been generated by the partial melting of an ilmenite-rich cumulate, (2) Apollo 11 (high K) basalts may have been generated by a small amount of partial melting of a more fractionated ilmenite-rich cumulate, (3) KREEP magmas may have been formed as residual melts produced by fractional crystallization of the lunar magma ocean, and (4) anomalous (type II) MOR basalts may have been generated by small degrees of partial melting of a relatively undepleted mantle with clinopyroxene remaining in the residium.

Mccallum, I. S.↗

The effect of N2/+/ recombination on the aeronomic determination of the charge exchange rate coefficient of O/+//2D/ with N2

The Atmosphere Explorer (AE) data are reexamined in the light of new laboratory measurements of the N2(+) recombination rate coefficient alpha. The new measurements support earlier measurements which yielded values of alpha significantly lower than the AE values. It is found that the values for alpha determined from the satellite data can be reconciled with the laboratory measurements, if the charge exchange rate coefficient for O(+)(2D) with N2 is less than one-quarter of that derived in the laboratory by Rutherford and Vroom (1971).

Torr, D. G.↗

Review of rate coefficients of ionic reactions determined from measurements made by the atmosphere explorer satellites

The large data base of aeronomic parameters measured by the Atmosphere Explorer C, D, and E satellites since December 1973 has been used to determine a number of reaction rate coefficients highly relevant to our understanding of thermospheric chemistry. In this paper the results are reviewed for ionic rate coefficients for recombination of NO(+), O2(+), for reactions of O(+) + N2, N2(+) + O, and O(++) + O, and for various reactions involving O(+)(2D) and O(+)(2P) ions with O and N2.

Torr, D. G.↗

Global accuracy estimates of point and mean undulation differences obtained from gravity disturbances, gravity anomalies and potential coefficients

Through the method of truncation functions, the oceanic geoid undulation is divided into two constituents: an inner zone contribution expressed as an integral of surface gravity disturbances over a spherical cap; and an outer zone contribution derived from a finite set of potential harmonic coefficients. Global, average error estimates are formulated for undulation differences, thereby providing accuracies for a relative geoid. The error analysis focuses on the outer zone contribution for which the potential coefficient errors are modeled. The method of computing undulations based on gravity disturbance data for the inner zone is compared to the similar, conventional method which presupposes gravity anomaly data within this zone.

Jekeli, C.↗

A program for calculating load coefficient matrices utilizing the force summation method, L218 (LOADS). Volume 2: Supplemental system design and maintenance document

The LOADS computer program L218 which calculates dynamic load coefficient matrices utilizing the force summation method is described. The load equations are derived for a flight vehicle in straight and level flight and excited by gusts and/or control motions. In addition, sensor equations are calculated for use with an active control system. The load coefficient matrices are calculated for the following types of loads: (1) translational and rotational accelerations, velocities, and displacements; (2) panel aerodynamic forces; (3) net panel forces; and (4) shears, bending moments, and torsions.

Anderson, L. R.↗

The radial diffusion coefficient of 1.3 - 2.3 MeV protons in recurrent proton streams

The paper presents anisotropy measurements of 1.3-2.3 MeV protons in the interplanetary space during recurrent events for which the radial intensity variation is measured within the radial range from about 0.3 to about 4 AU for the period from June, 1973 through April, 1976. The simultaneous measurements of the diffusive anisotropy and the radial gradient are used to make a direct estimate of the interplanetary radial diffusion coefficient, which is independent of any particular solution of the propagation equation. IMP 7 and 8 is required to be sunward of the earth and hence outside of the magnetosphere; if both spacecraft are sunward, measurements from the one farthest from the magnetosphere are used. The resulting values for the radial diffusivity coefficient near 1 AU lie in the range (3 to 9) x 10 to the 20th sq cm/sec, corresponding to scattering mean free paths between 0.03 and 0.1 AU with a mean of 0.06 AU.

Mewaldt, R. A.↗

Intensities and N2 collision-broadening coefficients measured for selected H2O absorption lines between 715 and 732 nm

Intensities and N2 collision-broadening coefficients are measured for 62 water vapor absorption lines between 715 and 732 nm potentially applicable to laser remote sensing of atmospheric water vapor. Absolute line strengths and widths were determined from spectra corrected for instrument resolution, air-path absorption and Lorentz and Doppler broadening for pure water vapor and water vapor-nitrogen mixtures in a multipass absorption cell with a base path length of 25 m (White cell). Line strengths are observed to range from 4 x 10 to the -25th to 4 x 10 to the -23rd kayser/molecule per sq cm, and collision broadening coefficients are found to be approximately equal to 0.1 kayser/atm.

Wilkerson, T. D.↗

A program for calculating load coefficient matrices utilizing the force summation method, L218 (LOADS). Volume 1: Engineering and usage

The LOADS program L218, a digital computer program that calculates dynamic load coefficient matrices utilizing the force summation method, is described. The load equations are derived for a flight vehicle in straight and level flight and excited by gusts and/or control motions. In addition, sensor equations are calculated for use with an active control system. The load coefficient matrices are calculated for the following types of loads: translational and rotational accelerations, velocities, and displacements; panel aerodynamic forces; net panel forces; shears and moments. Program usage and a brief description of the analysis used are presented. A description of the design and structure of the program to aid those who will maintain and/or modify the program in the future is included.

Miller, R. D.↗

Testing of turbulent seals for rotodynamic coefficients

A test program developed for dynamic testing of straight and convergent-tapered seals, with the capability of separately determining both direct and cross-coupled stiffness, damping, and added mass coefficients is described. The test apparatus causes the seal journal to execute small-eccentricity centered circular orbits within its bearings. Dynamic measurements are made and recorded of the seal-displacement-vector components, and of the pressure field. The pressure field is integrated to yield seal reaction force components. The displacement and force vector components are analyzed via a generalized Newton-Raphson procedure to yield the desired seal dynamic coefficients. Representative test data are provided and discussed.

Childs, D. W.↗

The Split Coefficient Matrix method for hyperbolic systems of gasdynamic equations

The Split Coefficient Matrix (SCM) finite difference method for solving hyperbolic systems of equations is presented. This new method is based on the mathematical theory of characteristics. The development of the method from characteristic theory is presented. Boundary point calculation procedures consistent with the SCM method used at interior points are explained. The split coefficient matrices that define the method for steady supersonic and unsteady inviscid flows are given for several examples. The SCM method is used to compute several flow fields to demonstrate its accuracy and versatility. The similarities and differences between the SCM method and the lambda-scheme are discussed.

Chakravarthy, S. R.↗

Absorption coefficient instrument for turbid natural waters

The paper presents an instrument that directly measures multispectral absorption coefficient of turbid natural water. Attention is given to the design, which is shown to incorporate methods for the compensation of variation in the internal light source intensity, correction of the spectrally dependent nature of the optical elements, and correction for variation in the background light level. In addition, when used in conjunction with a spectrally matched total attenuation instrument, the spectrally dependent scattering coefficient can also be derived. Finally, it is reported that systematic errors associated with multiple scattering have been estimated using Monte Carlo techniques.

Friedman, E.↗

Heat transfer coefficients for staggered arrays of short pin fins

Short pin fins are often used to increase that heat transfer to the coolant in the trailing edge of a turbine blade. Due primarily to limits of casting technology, it is not possible to manufacture pins of optimum length for heat transfer purposes in the trailing edge region. In many cases the pins are so short that they actually decrease the total heat transfer surface area compared to a plain wall. A heat transfer data base for these short pins is not available in the literature. Heat transfer coefficients on pin and endwall surfaces were measured for several staggered arrays of short pin fins. The measured Nusselt numbers when plotted versus Reynolds numbers were found to fall on a single curve for all surfaces tested. The heat transfer coefficients for the short pin fins (length to diameter ratios of 1/2 and 2) were found to be about a factor of two lower than data from the literature for longer pin arrays (length to diameter ratios of about 8).

Vanfossen, G. J.↗