Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Hubbard physics in the PAW GW approximation

It is demonstrated that the signatures of the Hubbard Model in the strongly interacting regime can be simulated by modifying the screening in the limit of zero wavevector in Projector-Augmented Wave GW calculations for systems without significant nesting. This modification, when applied to the Mott insulator CuO, results in the opening of the Mott gap by the splitting of states at the Fermi level into upper and lower Hubbard bands, and exhibits a giant transfer of spectral weight upon electron doping. The method is also employed to clearly illustrate that the M{sub 1} and M{sub 2} forms of vanadium dioxide are fundamentally different types of insulator. Standard GW calculations are sufficient to open a gap in M{sub 1} VO{sub 2}, which arise from the Peierls pairing filling the valence band, creating homopolar bonds. The valence band wavefunctions are stabilized with respect to the conduction band, reducing polarizability and pushing the conduction band eigenvalues to higher energy. The M{sub 2} structure, however, opens a gap from strong on-site interactions; it is a Mott insulator.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous enhancement of photovoltage and charge transfer in Cu{sub 2}O-based photocathode using buffer and protective layers

Coating n-type buffer and protective layers on Cu{sub 2}O may be an effective means to improve the photoelectrochemical (PEC) water-splitting performance of Cu{sub 2}O-based photocathodes. In this letter, the functions of the buffer layer and protective layer on Cu{sub 2}O are examined. It is found that a Ga{sub 2}O{sub 3} buffer layer can form a buried junction with Cu{sub 2}O, which inhibits Cu{sub 2}O self-reduction as well as increases the photovoltage through a small conduction band offset between the two semiconductors. The introduction of a TiO{sub 2} thin protective layer not only improves the stability of the photocathode but also enhances the electron transfer from the photocathode surface into the electrolyte, thus resulting in an increase in photocurrent at positive potentials. These results show that the selection of overlayers with appropriate conduction band positions provides an effective strategy for obtaining a high photovoltage and high photocurrent in PEC systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser deposition of large-area thin films

A new method for fabricating large-area thin films of uniform thickness on a rotating substrate is proposed. Its distinctive features are (i) the presence of a diaphragm, partially transmitting the evaporated material, between the target and substrate and (ii) the translatory motion of the rotating substrate with respect to the target at a certain velocity. The method proposed makes it possible to obtain thin films of uniform thickness on substrates with sizes limited by only the deposition chamber size. The method is experimentally verified by depositing thin CuO films on silicon substrates placed over the radius of a disk 300 mm in diameter. The deviation of the film thickness from the average value does not exceed {+-}3% throughout the entire radius, which confirms good prospects of this method for microelectronics, optical industry, and other modern technologies. (laser technology)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous expansion of the copper-apical-oxygen distance in superconducting cuprate bilayers

We have introduced an improved x-ray phase-retrieval method with unprecedented speed of convergence and precision, and used it to determine with sub-Angstrom resolution the complete atomic structure of epitaxial La{sub 2-x}Sr{sub x}CuO{sub 4} ultrathin films. We focus on superconducting heterostructures built from constituent materials that are not superconducting in bulk samples. Single-phase metallic or superconducting films are also studied for comparison. The results show that this phase-retrieval diffraction method enables accurate measurement of structural modifications in near-surface layers, which may be critically important for elucidation of surface-sensitive experiments. Specifically we find that, while the copper-apical-oxygen distance remains approximately constant in single-phase films, it shows a dramatic increase from the metallic-insulating interface of the bilayer towards the surface by as much as 0.45 {angstrom}. The apical-oxygen displacement is known to have a profound effect on the superconducting transition temperature.

36 MATERIALS SCIENCE↗

Spin frustration and an exotic critical point in ferromagnets from nonuniform opposite g factors

Here, it is demonstrated that novel spin frustration can be induced in ferromagnets with nonuniform opposite Landé g-factors. The frustrated state is characterized by a mutual interplay of typical ferromagnetic (FM) and antiferromagnetic (AF) features, such as the zero-field susceptibility being FM-like at low temperatures but AF-like at high temperatures. It is also found to contain an exotic zero-temperature 'half fire, half ice' critical point at which the spins on one sublattice are fully disordered and on the other one are fully ordered. We suggest that such frustration may occur in a number of copper-iridium oxides such as Sr 3 CuIrO 6 . We also anticipate a realization of the frustration and 'partial fire, partial ice' states in certain antiferromagnets, lattice gas, and neuron systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Particle-particle response function as a probe for electronic correlations in the p-d Hubbard model

We discuss and compare different approximations to the particle-particle response function in the p-d (three-band) Hubbard model for the CuO{sub 2} plane of superconducting cuprates. Besides the relevance for understanding the role of correlations in high-T{sub c} superconductors, the interest in the CuO{sub 2} plane is due to the presence of three incompletely filled valence bands. The bare ladder approximation (BLA) was employed long ago in the context of Auger core-valence-valence spectroscopy of late transition metals while the time-dependent (TD) Gutzwiller approximation (GA) is a much more sophisticated and recent development. The validity of both is assessed by comparing with exact-diagonalization results from a finite six-site cluster. We find that for standard parameter sets TDGA and BLA yield two-hole spectra in excellent agreement with the exact ones. Although the interaction is comparable to the kinetic energy, the system is far from the extreme Mott limit often assumed in cuprates, where the Mott insulating character is completely local. In order to identify possible fingerprints of the extreme Mott regime we artificially reduce the bandwidth. We find that the BLA breaks down while the TDGA keeps near the exact results. Our findings provide a simple criterion to identify doped and undoped extreme Mott insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unconventional proximity effect and inverse spin-switch behavior in a model manganite-cuprate-manganite trilayer system

The proximity effect in a model manganite-cuprate system is investigated theoretically. We consider a situation in which spin-polarized electrons in manganite layers antiferromagnetically couple with electrons in cuprate layers as observed experimentally. The effect of the interfacial magnetic coupling is found to be much stronger than the injection of spin-polarized electrons into the cuprate region. As a result, the superconducting transition temperature depends on the thickness of the cuprate layer significantly. Since the magnetic coupling creates negative polarization, an applied magnetic field and the negative polarization compete, resulting in the inverse spin-switch behavior where the superconducting transition temperature is increased by applying a magnetic field.

36 MATERIALS SCIENCE↗

Finite-Element Analysis of the Strain Distribution Due to Bending in a REBCO Coated Conductor for Canted Cosine Theta Dipole Magnet Applications

High-current cables using REBCO tapes can be used to develop high-field dipole magnets. However, the strain accumulated during cable fabrication and coil winding may reduce the critical current of the conductor. Therefore, it is important to properly consider the strain when designing high-field magnets. We used structural finite-element analysis (FEA) to predict the strain experienced by a REBCO tape during bending in configurations relevant to the fabrication of high-field accelerator magnets, in particular, the mechanical strain generated during cable fabrication and winding in a canted-cosθ dipole configuration. We considered two different cable options: (A) Flat tape that lay in the mandrel channel and (B) a REBCO tape helically wound around a circular copper core, the typical configuration of the conductor in round core cable (CORC). Strain accumulated during tape winding is studied for different core diameters and winding tilt angles. FEA longitudinal strain results were compared with the simulations for configuration A, where higher strain was observed experimentally. Configuration B was verified indirectly by comparing experimentally measured I c with the one predicted (based on the longitudinal strain) as a function of the bending diameter. Good agreement was found up to a bending diameter of 30 mm. The presented results will help to understand the impact of bending on REBCO tapes and CORC wires to develop high-field magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurements of the Strain Dependence of Critical Current of Commercial REBCO Tapes at 15 T Between 4.2 and 40 K for High Field Magnets

Interest for high magnetic fields (>16 T) for applications in high energy physics (HEP) and fusion machines, requires the development of high current cables capable to withstand the large forces, mechanical and electromagnetic, experienced during manufacturing and operations. The critical current (I c ) of REBCO tapes depends on strain, magnetic fields, and operational temperatures. Understanding how these parameters affect the I c of the conductor will be critical to develop robust high-current REBCO cables. However, there are limited reports on the strain dependence of I c , in particular at high fields and elevated temperatures relevant for future high-field compact fusion reactor magnets. We present here I c of commercial REBCO tapes measured as a function of compressive and tensile strain (between -0.6% and +0.65%) at high magnetic fields (12 and 15 T) and different temperatures (within 4.2-40 K). Results at 4.2 and 20 K showed less than 5% reduction in the normalized I c at high strain, while a stronger strain dependence was observed at 40 K. Samples tested at 12 T and 4.2 K showed similar strain dependence as 15 T and 4.2 K. In all tested conditions, the tape experienced reversible I c reduction in both tension and compression. Finite element analysis was used to predict the residual thermal strain accumulated in the REBCO layer prior of testing to account for the effect of the cooldown. A method was also developed to account for the current sharing observed between the sample and the sample holder during the ramp of the current. Our results provide useful input for the development of high-field fusion and HEP magnets using REBCO conductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-Line Superconducting Waveguides Based on YBCO-on-Kapton Technology

Coplanar (with the ground) and stripline 25 cm long waveguides are manufactured from the YBCO-Kapton material. The waveguides are intended as the key components of a scalable signal delivery for large quantum computing systems and detectors. The waveguide is coupled with an integrated power divider that replaces the standard attenuator. The divider is designed to return most of the power to the previous thermalization stage. The method is projected to reduce the active dissipation by ≈10. We investigate the effect of internal strain in YBCO layer on the device's mechanical stability. Here, we show that adhesives with high stiffness are essential for the reliability of YBCO-Kapton devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Meter-scale High-temperature Superconducting RF Waveguides with Integrated Filters and Attenuators

Here, we report the performance of coplanar, multifilament waveguides manufactured from crystalline films of a well-known HTS compound, YBCO, transferred to a low-loss dielectric substrate, such as E-Kapton. The coplanar two-line waveguide delivers low cross-talk, below 20 dB level, and low attenuation, below 4 dB/m at 6 GHz, 77 K. Controlled-impedance 50 Ω waveguides would require a method for reliable patterning narrow, less than 100-micron wide, YBCO traces over a meter length. We report a lithography-etching approach that minimizes the difference in the etching rate of YBCO and the metallization layers of Ag and Cu. An array of metalized vias isolates the traces. We describe the via metallization process that is not damaging to YBCO and compatible with dense, 2 mm period, arrays of vias.

36 MATERIALS SCIENCE↗

Effects of deposition and annealing temperatures on the electrical and optical properties of Ag{sub 2}O and Cu{sub 2}O-Ag{sub 2}O thin films

Ag{sub 2}O and Ag{sub 2}O-Cu{sub 2}O films were deposited on glass substrates by magnetron sputtering of Ag and Cu targets at various substrate temperatures. After deposition, some of these films were annealed using a rapid thermal annealing system, with the variation of temperature. An UV-VIS-NIR photometer and a Hall measurement system were used to characterize the optical and electrical properties of these films. On annealing, Ag{sub 2}O (hexagonal) phase would slowly change to Ag+Ag{sub 2}O (cubic) phases when the annealing temperature is greater than 200 deg. C When the annealing temperature was higher than 450 deg. C, the Ag{sub 2}O phase would transform into a metallic Ag phase completely. Accordingly, the band gap of these films will change, along with the optical and electrical properties. In the study of Ag{sub 2}O-Cu{sub 2}O films, it is found that these two-phase composite films could exist obviously when deposited at room temperature. The photoinduced current of these composite films could be increased significantly, compared with that of a single Cu{sub 2}O phase. This is most likely due to that a large band gap semiconductor (Cu{sub 2}O) is coupled with a small band gap semiconductor (Ag{sub 2}O).

36 MATERIALS SCIENCE↗

Atomic layer deposition of ZnO on Cu-nanoclusters for methanol synthesis

The properties of ALD-grown ZnO thin films on Cu clusters supported on ZnO(1010) have been studied with scanning tunneling and scanning electron microscopy in combination with angle-resolved x-ray photoelectron spectroscopy. Deposition at room temperature of two monolayers of Cu on ZnO(1010) results in metallic Cu{sup 0} clusters {approx}8 nm wide by 1.4 nm high. Higher coverages of 15 ML results in a similar morphology, with slightly larger cluster sizes. Following air-exposure and ALD-growth of two cycles of ZnO, the Cu exhibits Cu{sup +} species characteristic of Cu{sub 2}O and the thin ZnO coating is hydroxylated. Electrochemical studies of ALD ZnO coatings on Cu suggest that they are more active for CO{sub 2} reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface chemistry of a Cu(I) beta-diketonate precursor and the atomic layer deposition of Cu{sub 2}O on SiO{sub 2} studied by x-ray photoelectron spectroscopy

The surface chemistry of the bis(tri-n-butylphosphane) copper(I) acetylacetonate, [({sup n}Bu{sub 3}P){sub 2}Cu(acac)] and the thermal atomic layer deposition (ALD) of Cu{sub 2}O using this Cu precursor as reactant and wet oxygen as coreactant on SiO{sub 2} substrates are studied by in-situ x-ray photoelectron spectroscopy (XPS). The Cu precursor was evaporated and exposed to the substrates kept at temperatures between 22 °C and 300 °C. The measured phosphorus and carbon concentration on the substrates indicated that most of the [{sup n}Bu{sub 3}P] ligands were released either in the gas phase or during adsorption. No disproportionation was observed for the Cu precursor in the temperature range between 22 °C and 145 °C. However, disproportionation of the Cu precursor was observed at 200 °C, since C/Cu concentration ratio decreased and substantial amounts of metallic Cu were present on the substrate. The amount of metallic Cu increased, when the substrate was kept at 300 °C, indicating stronger disproportionation of the Cu precursor. Hence, the upper limit for the ALD of Cu{sub 2}O from this precursor lies in the temperature range between 145 °C and 200 °C, as the precursor must not alter its chemical and physical state after chemisorption on the substrate. Five hundred ALD cycles with the probed Cu precursor and wet O{sub 2} as coreactant were carried out on SiO{sub 2} at 145 °C. After ALD, in-situ XPS analysis confirmed the presence of Cu{sub 2}O on the substrate. Ex-situ spectroscopic ellipsometry indicated an average film thickness of 2.5 nm of Cu{sub 2}O deposited with a growth per cycle of 0.05 Å/cycle. Scanning electron microscopy and atomic force microscopy (AFM) investigations depicted a homogeneous, fine, and granular morphology of the Cu{sub 2}O ALD film on SiO{sub 2}. AFM investigations suggest that the deposited Cu{sub 2}O film is continuous on the SiO{sub 2} substrate.

36 MATERIALS SCIENCE↗

Atomic layer deposition of ultrathin Cu{sub 2}O and subsequent reduction to Cu studied by in situ x-ray photoelectron spectroscopy

The growth of ultrathin (<5 nm) Ru-doped Cu{sub 2}O films deposited on SiO{sub 2} by atomic layer deposition (ALD) and Cu films by subsequent reduction of the Cu{sub 2}O using HCO{sub 2}H or CO is reported. Ru-doped Cu{sub 2}O has been deposited by a mixture of 16: 99 mol. % of [({sup n}Bu{sub 3}P){sub 2}Cu(acac)] as Cu precursor and 17: 1 mol. % of [Ru(η{sup 5}-C{sub 7}H{sub 11})(η{sup 5}-C{sub 5}H{sub 4}SiMe{sub 3})] as Ru precursor. The catalytic amount of Ru precursor was to support low temperature reduction of Cu{sub 2}O to metallic Cu by formic acid (HCO{sub 2}H) on arbitrary substrate. In situ x-ray photoelectron spectroscopy investigations of the Cu{sub 2}O ALD film indicated nearly 1 at. % of carbon contamination and a phosphorous contamination below the detection limit after sputter cleaning. Systematic investigations of the reduction of Ru-doped Cu{sub 2}O to metallic Cu by HCO{sub 2}H or CO as reducing agents are described. Following the ALD of 3.0 nm Cu{sub 2}O, the ultrathin films are reduced between 100 and 160 °C. The use of HCO{sub 2}H at 110 °C enabled the reduction of around 90% Cu{sub 2}O. HCO{sub 2}H is found to be very effective in the removal of oxygen from Ru-doped Cu{sub 2}O films with 2.5–4.7 nm thickness. In contrast, CO was effective for the removal of oxygen from the Cu{sub 2}O films only below 3.0 nm at 145 °C. Root mean square surface roughness of 0.4 ± 0.1 nm was observed from atomic force microscopy (AFM) investigations after the ALD of Cu{sub 2}O, followed by the subsequent reduction of 3.0 nm Cu{sub 2}O using either HCO{sub 2}H at 110 °C or CO at 145 °C on SiO{sub 2}. Furthermore, ex situ low energy ion scattering and AFM investigations confirmed that the Cu{sub 2}O film after ALD and Cu films after subsequent reduction was continuous on the SiO{sub 2} substrate.

42 ENGINEERING↗

Synthesis and Properties of Phases in the PbO–MO–Nb{sub 2}O{sub 5} (M = Cu, Ni) Systems

In this paper, we report the solid-state synthesis, characterization, and physicochemical properties of Pb{sub 4–x}M{sub x}Nb{sub 2}O{sub 9} (M = Cu, Ni; x = 0–1.0) solid solutions. We have identified the stability limits of the solid solutions. Using the tolerance factor and relative electronegativities of the A- and B-site atoms (A{sub 4}B{sub 2}O{sub 9}), we have identified the stability fields of the perovskite-related solid solutions. The materials have been characterized by X-ray diffraction, and the particle size composition of the synthesized powders has been determined. Their electrical conductivity has been measured as a function of temperature. We have studied the key electrochemical characteristics of solid-contact ion-selective electrodes fabricated using the synthesized materials: linear range and slope of the principal electrode function, working pH range, and response time.

36 MATERIALS SCIENCE↗

Application of the Model of Spheroidal Scatterers for Determination of Particles Sizes of Aqueous Suspensions by the Laser-Polarimetry and Dynamic-Light-Scattering Methods

Results of measurements of particle sizes of a dispersed medium by the methods of laser polarimetry and dynamic light scattering are presented for water suspensions of ZnO, CuO, TiO{sub 2}, and BaTiO{sub 3} with particles of irregular shape. When using the laser-polarimetry method, the particle-size distributions within the framework of the spheroidal-scatterer model are reconstructed. The same model was used to correct data obtained by the method of dynamic light scattering. The data obtained are compared with results obtained by electron microscopy. It is shown that, at values of the size parameter of 2–5, correction of the results of measurements obtained by the dynamic-light-scattering method makes it possible to reduce the error in determining the average particle size by this method to no more than 11%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗