Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHLORINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

An explanation of the preferential formation of less stable isomers in three-body reactions - Cl + NO2 + M; ClO + NO2 + M

A realistic assessment of the potential depletion of stratospheric ozone due to manmade emissions requires a knowledge of the sources and sinks of the potential threat. The reactions ClO + NO2 + M yield products and Cl + NO2 + M yield products are of interest because they represent possible sink mechanism for both odd chlorine and odd nitrogen species. In this paper, the Troe method (1977) is used to calculate the low-pressure limit rate constants of the above three-body reactions. The result for the Cl + NO2 + M reaction is found to be in excellent agreement with the experimental finding of Niki et al. (1978), where both nitryl chloride and chlorine nitrate are products of the cited reaction. An explanation is proposed to account for apparent discrepancy between the measured rate constants for ClO + NO2 + M in the forward and reverse directions. Stratospheric implications are also discussed.

Chang, J. S.↗

Chlorinolysis reclaims rubber of waste tires

Process reclaims rubber and reduces sulfur content by using chlorine gas to oxidize sulfur bonds in preference to other bonds. Rubber does not have poor hysteresis and abrasion resistance like conventionally reclaimed rubber and is suitable for premium radial tires. Chlorinated rubber is less susceptible to swelling by oils and may be used as paint ingredient.

Dufresne, E. R.↗

The chemistry of Venus' atmosphere

A model for the Venus atmosphere involving photochemistry of oxygen, hydrogen, chlorine and sulfur species is presented. Sulfur reaction schemes and hydrogen and chlorine reaction schemes were included. The impact of sulfur on the oxygen budget and the subsequent production of H2SO4 molecules for the Venus cloud deck were explored. A major new reaction scheme for production of H2SO4 molecules involving sulfur and oxygen chemistry was established shown to dominate over the odd hydrogen scheme proposed earlier. The efficiency of the scheme in formation of H2SO4 is only about 50%, with the remaining sulfur residing in SO2 molecules. The calculated downward flux of H2SO4 may be sufficient to maintain a steady state sulfuric acid cloud if the resident time of H2SO4 droplets in the cloud is as long as a few years. If however, the resident time is half a year or shorter, additional chemistry capable of more efficient conversion of SO2 to SO3 is required.

Sze, N. D.↗

Nitrogen fertiliser and stratospheric ozone - Latitudinal effects

Substantial increases in atmospheric N2O resulting from the increased use of nitrogen fertilizers might cause large (to 10%) decreases in the stratospheric ozone content. Such ozone decreases would be caused by catalytic reaction cycles involving odd-nitrogen that is formed by N2O decomposition in the upper stratosphere. Turco et al. (1978), using a background chlorine level of 2 ppbv, have shown that if the measured values of specified reactions are used a 50% increase in N2O would lead to a 2.7% increase in the stratospheric column density, although the ozone content above 30 km would be reduced by more than 5%; they also estimated (unpublished data) that the change in the ozone column density caused by doubling the N2O abundance would be very close to zero (within about 0.1%). The present paper extends these calculations of N2O/ozone effects to two dimensions, thereby identifying the latitude dependence expected for such ozone perturbations. The effects of changes in stratospheric chlorine levels on predicted ozone changes are also discussed.

Whitten, R. C.↗

Atmospheric bromine and ozone perturbations in the lower stratosphere

The role of bromine compounds in the photochemistry of the natural and perturbed stratosphere has been reexamined using an expanded reaction scheme and the results of recent laboratory studies of several key reactions. The most important finding is that through the reaction BrO + ClO yielding Br + Cl + O2 there is a synergistic effect between bromine and chlorine which results in an efficient catalytic destruction of ozone in the lower stratosphere. One-dimensional photochemical model results indicate that BrO is the major bromine species throughout the stratosphere, followed by BrONO2, HBr, HOBr and Br. It is shown from the foregoing that bromine is more efficient than chlorine as a catalyst for destroying ozone, and the implications for stratospheric ozone of possible future growth in the industrial and agricultural use of bromine are discussed. Bromine concentrations of 20 pptv (2 x 10 to the -11th power), as suggested by recent observations, can decrease the present-day integrated ozone column density by 2.4%, and can enhance ozone depletion from steady-state chlorofluoromethane release at 1973 rates by a factor of 1.1-1.2.

Yung, Y. L.↗

Stability of brines on Mars

The detection of high chlorine and sulfate abundances and duricrusts on Mars strongly suggests the occasional presence of brines on the Martian surface. Ternary phase diagrams for the likely chloride and sulfate brines indicate that the minimum temperature at which a brine can be stable is near 210 K with a water concentration of approximately 70 wt % and a high concentration of calcium chloride. The dominance of sulfate over chlorine in the Martian regolith suggests precipitation of salts at temperatures higher than the minimum.

Brass, G. W.↗

Kinetics study of the Cl/2P/ + Cl2O yields Cl2 + ClO reaction at 298 K

The kinetics of the Cl + Cl2O reaction, a possible source of ClO(2 Pi) radicals for atmospheric photochemical studies, are investigated at 298 K. The discharge flow/mass spectrometry and discharge flow/resonance fluorescence techniques were used to monitor the decay of C12O in the presence of excess concentrations of atomic chlorine and chlorine monoxide, respectively. The pseudo-first order rate constants obtained from both experiments are found to be in excellent agreement, averaging 9.8 + or - 0.8 x 10 to the -11th cu cm/molecule per sec. Results are consistent with the lower limit obtained by Edgecombe et al. (1957) but differ by a factor of 150 from those of Basco and Dogra (1971). The present value is also noted to be consistent with a lower value for the rate constant of the reaction of oxygen atoms with Cl2O.

Ray, G. W.↗

Asymmetrical ClO3 - Its possible formation from ClO and O2 and its possible reactions

An analysis of recent accurate experimental studies of Cl2-photosensitized O3 decomposition, in which O3 disappearance and OClO formation were directly monitored, suggests the possibility that the suppression of the quantum yield in the presence of O2 may be due to the formation of asymmetrical chlorine trioxide (ClO.O2). Other intermediaries, such as Cl2O2, which may also form in the system are not thought to explain the observations. In addition to its capacity to oxidize, which it shares with other peroxo compounds, asymmetrical ClO3 appears to undergo an interesting class of reactions in which the loosely bound O2 adduct is relatively easily displaced by reactive atoms and radicals such as chlorine.

Prasad, S. S.↗

Coal desulfurization by low temperature chlorinolysis, phase 3

Laboratory scale, bench scale batch reactor, and minipilot plant tests were conducted on 22 bituminous, subbituminous, and lignite coals. Chemical pretreatment and post treatment of coals relative to the chlorination were tried as a means of enhancing desulfurization by the chlorinolysis process. Elevated temperature (500-700 C) hydrogen treatment of chlorinolysis-processed coal at atmospheric pressure was found to substantially increase coal desulfurization up to 90 percent. Sulfur forms, proximate and ultimate analyses of the processed coal are included. Minipilot plant operation indicates that the continuous flow reactor provides coal desulfurization results comparable to those obtained in the batch reactor. Seven runs were conducted at coal feed rates of 1.5 to 8.8 kg per hour using water and methylchloroform solvents, gaseous chlorine feed of 3 to 31.4 SCFH at 21 to 70 C, and atmospheric pressure for retention times of 20 to 120 minutes.

Kalvinskas, J. J.↗

Influence of mineral oil and additives on microhardness and surface chemistry of magnesium oxide (001) surface

X-ray photoelectron spectroscopy analyses and hardness experiments were conducted with cleaved magnesium oxide /001/ surfaces. The magnesium oxide bulk crystals were cleaved into specimens along the /001/ surface, and indentations were made on the cleaved surface in laboratory air, in nitrogen gas, or in degassed mineral oil with and without an additive while not exposing specimen surface to any other environment. The various additives examined contained sulfur, phosphorus, chlorine, or oleic acid. The sulfur-containing additive exhibited the highest hardness and smallest dislocation patterns evidencing plastic deformation; the chlorine-containing additive exhibited the lowest hardness and largest dislocation patterns evidencing plastic deformation. Hydrocarbon and chloride (MgCl2) films formed on the magnesium oxide surface. A chloride film was responsible for the lowest measured hardness.

Miyoshi, K.↗

High power metallic halide laser

A laser amplification system is disclosed whereby a metallic halide vapor such as copper chloride is caused to flow through a laser amplifier and a heat exchanger in a closed loop system so that the flow rate is altered to control the temperature rise across the length of the laser amplifier. The copper atoms within the laser amplifier should not exceed a temperature of 3000 K, so that the number of copper atoms in the metastable state will not be high enough to prevent amplification in the amplifier. A molecular dissociation apparatus is provided at the input to the laser amplifier for dissociating the copper chloride into copper atoms and ions and chlorine atoms and ions. The dissociation apparatus includes a hollow cathode tube and an annular ring spaced apart from the tube end. A voltage differential is applied between the annular ring and the hollow cathode tube so that as the copper chloride flows through, it is dissociated into copper and chlorine ions and atoms.

Pivirotto, T. J.↗

Desulfurizing Coal By Chlorinolysis and Hydrogenation

85 percent of organic and pyritic sulfur in coal removed by combination of chlorinolysis and hydrogeneration. Coal is fed to hydrogenator after chlorination. Coal flows against hydrogen current increasing mixing and reducing hydrogen consumption. Excess hydrogen is recovered from gaseous reaction products. Product coal contained 62.5 percent less total sulfur than same coal after chlorination.

Kalvinskas, J. J.↗

Oceanic corrosion test of bare and zinc-protected aluminum alloys for seawater heat exchangers

Bare 3004 tubes, 7072 Alclad 3004 tubes, and bare and zinc diffusion treated 3003 extrusions from a brazed aluminum, plate-fin heat exchanger were exposed to 1.8 m/sec flowing seawater aboard an open ocean test facility moored 3.4 km off the southeast coast of Puerto Rico. After six months exposure, the average corrosion rates for most varieties of aluminum materials converged to a low value of 0.015 mm/yr (0.6 mils/yr). Pitting did not occur in bare 3003 and 3004 samples during the six month test. Pitting did occur to varying degrees in the Alclad and zinc diffusion treated material, but did not penetrate to the base metal. Biofouling countermeasures (intermittent chlorination and brushing) did not affect the corrosion rates to any significant extent. Intermittent chlorination at a level of 0.5 ppm for 28 minutes daily controlled microbiofouling of the samples but did not prevent the development of a macrobiofouling community in areas of the plumbing with low flow.

Sasscer, D. S.↗

Sputtering of Al2O3 and LiNbO3 in the electronic stopping region

Because of recent interest in the role played by the thermal properties of materials that exhibit high energy sputtering, Al2O3 and LiNbO3 were sputtered with chlorine ions at energies between 3 MeV and 25 MeV. To detect the sputtered Al and Nb we employ thin carbon catcher foils, which are analyzed with Rutherford scattering in the forward direction. Al surface densities of 10 to the 14th/sq cm and Nb surface densities of 10 to the 13th/sq cm are easily measured. The sputtering yields for both Al2O3 and LiNbO3 increase rapidly with increasing chlorine energy, and the Al and Nb yields are both approximately 0.2 at 20 MeV. Tests for dose, beam current, and contamination effects will be discussed.

Qiu, Y.↗

Improved Electrodes for Lithium Cells

Chlorinated elastomeric binder improves cell mechanical and electrical characteristics. Substituted for PTFE binder, chlorinated polyethylene rubber allows high cell-discharge rates and higher stored energy per unit volume. In addition, it costs about one-eighth as much as PTFE.

Yen, S. P. S.↗

Fluidized bed desulfurization

High sulfur content carbonaceous material, such as coal is desulfurized by continuous fluidized suspension in a reactor with chlorine gas, inert dechlorinating gas and hydrogen gas. A source of chlorine gas, a source of inert gas and a source of hydrogen gas are connected to the bottom inlet through a manifold and a heater. A flow controler operates servos in a manner to continuously and sequentially suspend coal in the three gases. The sulfur content is reduced at least 50% by the treatment.

Ravindram, M.↗

Kinetics of the reaction Cl + NO2 + M

Using atomic chlorine resonance fluorescence at 140 nm to detect the decay of atomic chlorine in the presence of an excess of NO2, the rate constant for the reaction Cl + NO2 + M, where M is the total gas concentration, is measured over the temperature range 264 to 417 K and at a pressure 1 to 7 torr in a discharge flow system. The rate constants for M= He and M= N2 are measured and the results are summarized in a table. The systematic error of the rate constants is estimated to be about 15 percent. A static photolysis system coupled with an FTIR spectrophotometer is used to determine the branching ratio for the formation of two possible isomers. The ratio is concluded to be ClONO (greater than or equal 75 percent) and ClNO2 (less than or equal 25 percent) which is in agreement with the results of Niki et al. (1978).

Leu, M.-T.↗

Deposition of silicon nitride from SiCl4 and NH3 in a low pressure RF plasma

Silicon nitride coatings were deposited in a low-pressure (1-10 Torr) RF plasma from SiCl4 and NH3 in the presence of argon onto stainless martensitic steel grounded and floating substrates at 300 C and 440 C respectively. The heating of the substrates depends mainly on the position and the induced RF power. The coatings were identified as silicon nitride by X-ray investigation and were found to contain chlorine by energy-dispersive analysis of X-rays. The growth rate, the microhardness and the chlorine concentration of the coatings were determined as a function of the total gas pressure, the RF power input and the NH3-to-SiCl4 ratio. It was observed that the coatings on the floating substrates have higher deposition rates and are of superior quality.

Ron, Y.↗