Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAPTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Indirect Measurement of the 23 Na(p, γ) 24 Mg Direct Capture Reaction Rate via ( 3 He,d) Spectroscopy

The cross section of the $^{23}\text{Na}(p,γ)^{24}\text{Mg}$ reaction is dominated by direct capture at low energies relevant for stellar burning. Such cross sections can be constrained using spectroscopic factors($C^2S$) or asymptotic normalization coefficients(ANCs) from transfer reactions. In this work, the $^{23}\text{Na}(^3\text{He},d)^{24}\text{Mg}$ reaction was measured at $E_{lab}=21$ MeV to extract spectroscopic factors for $^{24}\text{Mg}$ states with excitation energies in $E_x=7 - 12$ MeV using the Enge split-pole spectrograph at the Triangle Universities Nuclear Laboratory. A new non-resonant astrophysical S factor and the direct capture reaction rate for the $^{23}\text{Na}(p,γ)$ reaction are calculated and presented based on this measurement. The new rate at $T<0.04$ GK is 43$\%$ smaller than in previous studies. Rigorous treatments of uncertainties are presented using a Bayesian Markov Chain Monte Carlo (MCMC) method. Finally, sources of uncertainties for computing the direct capture cross section are also discussed in detail.

electromagnetic moments↗

Simultaneous electron capture and bound-free pair production in relativistic collisions of heavy nuclei with atoms

We consider a two-step process that may occur in relativistic ion-atom collisions. In this process, within a single ion-atom collision, an atomic electron is captured by the ion via the radiative and/or nonradiative capture channels, while the colliding nuclei of the atom and ion simultaneously produce an electron-positron pair with the electron created in a bound state of the ion. As a result, the ion picks up two electrons and a positron is emitted. We calculate the total cross section for this process in collisions of incident 1-4 GeV/u U{sup 92+} projectiles with various atomic targets and discuss its dependence on the collision energy and target atomic number. We also analyze whether this process can compete with electron recombination proceeding via the excitation of the negative-continuum states, in which an atomic electron incident on a bare nucleus is captured into a bound state of the ion by transferring the energy excess to a negative-continuum electron with the latter undergoing a transition into a bound state. According to our estimates, the electron recombination dominates the two-step process in collisions with light and intermediately heavy atoms (Z{sub a} < or approx. 50), while in collisions with heavy atoms the latter leads to much larger cross sections.

74 ATOMIC AND MOLECULAR PHYSICS↗

Radiative double-electron capture by bare nucleus with emission of one photon

Calculation of the cross-section for the process of double-electron capture by a bare nucleus with emission of a single photon is presented. The double-electron capture is evaluated within the framework of quantum electrodynamics. The line-profile approach is employed. Since the radiative double-electron capture is governed by the electron correlation, corrections to the interelectron interaction were calculated with high accuracy, partly to all orders of the perturbation theory.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ab initio calculation of muon capture on 24 Mg

In this work we study ordinary muon capture (OMC) on 24 Mg from a first-principles perspective. Starting from a particular two- and three-nucleon interaction derived from chiral effective field theory, we use the valence-space in-medium similarity renormalization group (VS-IMSRG) framework to construct effective Hamiltonians and muon-capture operators, which nonperturbatively account for many-body physics outside the valence space. Here, the obtained nuclear matrix elements are compared against those from the phenomenological shell model. The impact of including the correlations from the nuclear shell model (NSM) as well as including the induced twobody part is studied in detail. Furthermore, the effects of realistic bound-muon wave function on the operators is studied. Finally, predictions for capture rates to the lowest excited states in 24 Na are given and compared with available data. It is found that the spectroscopic properties of 24 Mg and its OMC daughter 24 Na are fairly well described by both the NSM and VS-IMSRG, and that the effect of the hadronic two-body currents significantly reduces the OMC rates. Both models have some difficulties in matching the measured OMC rates, especially for the 2 + final states. This calls for further studies in other light nuclei with available OMC data.

20 ≤ A ≤ 38↗

Relativistic quasiparticle random-phase approximation calculation of total muon capture rates

The relativistic proton-neutron quasiparticle random phase approximation (pn-RQRPA) is applied in the calculation of total muon capture rates on a large set of nuclei from {sup 12}C to {sup 244}Pu, for which experimental values are available. The microscopic theoretical framework is based on the relativistic Hartree-Bogoliubov (RHB) model for the nuclear ground state, and transitions to excited states are calculated using the pn-RQRPA. The calculation is fully consistent, i.e., the same interactions are used both in the RHB equations that determine the quasiparticle basis, and in the matrix equations of the pn-RQRPA. The calculated capture rates are sensitive to the in-medium quenching of the axial-vector coupling constant. By reducing this constant from its free-nucleon value g{sub A}=1.262 by 10% for all multipole transitions, the calculation reproduces the experimental muon capture rates to better than 10% accuracy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Parametrization of low-energy cross sections for nonresonant neutron capture

The nonresonant component of radiative neutron capture reactions is parametrized at low energies by a polynomial of second degree. The potential model is first used to reproduce experimental data below 1 MeV with the help of spectroscopic factors. The fits are found sensitive to the scattering length of the initial s or p waves. The coefficients of a Taylor expansion are then calculated by resolution of the Schroedinger equation and its energy derivatives at energy zero. Such theory-guided parametrizations are derived for neutron capture by {sup 7}Li, {sup 12}C, {sup 14}C, {sup 16}O, and {sup 18}O. When the capture proceeds from the s wave to a weakly bound state, a Pade-like parametrization better approximates the potential-model results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Benchmarking a surrogate reaction for neutron capture

{sup 171,173}Yb(d,p{gamma}) reactions are measured, with the goal of extracting the neutron capture cross-section ratio as a function of the neutron energy using the external surrogate ratio method. The cross-section ratios obtained are compared to the known neutron capture cross sections. Although the Weisskopf-Ewing limit is demonstrated not to apply for these low neutron energies, a prescription for deducing surrogate cross sections is presented. The surrogate cross-section ratios deduced from the {sup 171,173}Yb(d,p{gamma}) measurements agree with the neutron capture results within 15%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron capture-induced nuclear recoils as background for CE$v$⁢NS measurements at reactors

Nuclear reactors represent a promising neutrino source for CE⁢v⁢NS (coherent-elastic neutrino-nucleus scattering) searches. However, reactor sites also come with high ambient neutron flux. Neutron capture-induced nuclear recoils can create a spectrum that strongly overlaps the CEv⁢NS signal for recoils ≲100 eV for nuclear reactor measurements in silicon or germanium detectors. This background can be particularly critical for low-power research reactors providing a moderate neutrino flux. Here, in this work we quantify the impact of this background and show that, for a measurement 10 m from a 1 MW reactor, the effective thermal neutron flux should be kept below ~7 × 10 –4 ⁢n/cm 2 s so that the CE⁢v⁢NS events can be measured at least at a 5⁢σ level with germanium detectors in 100 kg yr exposure time. This flux corresponds to 60% of the sea-level flux but needs to be achieved in a nominally high-flux (reactor) environment. Improved detector resolution can help the measurements, but the thermal flux is the key parameter for the sensitivity of the experiment. For silicon detectors, the constraint is even stronger and thermal neutron fluxes must be near an order of magnitude lower. This constraint highlights the need of an effective thermal neutron mitigation strategy for future low threshold CEv⁢NS searches. In particular, the neutron capture-induced background can be efficiently reduced by active veto systems tagging the deexcitation gamma following the capture.

79 ASTRONOMY AND ASTROPHYSICS↗

Precision measurement of the rate of nuclear muon capture in the muonic hydrogen atom and the determination of the pseudoscalar form factor of the nucleon

The rate {Lambda}{sub S} of nuclear muon capture by a proton from the hyperfine singlet ground state of the {mu}p atom has been measured using a new experimental method based on a time-projection chamber operating in an ultrapure hydrogen gas at a pressure of 10 atm. The capture rate has been determined from the difference between the measured lifetime of the negative muon in hydrogen and the world average lifetime of the positive muon. The analysis of 10% of the collected statistics (2 x 10{sup 10}) of {mu}e decays yields the muon capture rate {Lambda}{sub S} = 725.0 {+-} 17.4 s{sup -1}, from which the pseudoscalar form factor of the nucleon, g{sub P}(q{sub c}{sup 2} = -0.88m{sub {mu}}{sup 2}) = 7.3 {+-} 1.1, is determined. The further analysis of the collected experimental data should improve the precision of this measurement by a factor of 3.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Astrophysical S factors for radiative proton capture by {sup 3}H and {sup 7}Li nuclei

Within the potential cluster model where orbital states are classified according to Young diagrams and isospin, astrophysical S factors are considered for radiative proton capture by {sup 3}H and {sup 7}Li nuclei at energies of up to 1 and 10 keV, respectively. It is shown that the approach used, which takes into account only the E1 transition for the p{sup 3}H capture process, makes it possible to describe well the most recent experimental data at c.m. energies in the range from 50 keV to 5MeV. In the case of proton capture by {sup 7}Li nuclei, an M1 processwas taken into account in addition to the E1 transition, and a general behavior and the magnitude of the experimental S factor could be correctly reproduced owing to this at astrophysical energies, including the region around the resonance at 0.441 MeV (in the laboratory frame).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Total and partial capture cross sections in reactions with deformed nuclei at energies near and below the Coulomb barrier

Within the quantum diffusion approach, the capture of a projectile nucleus by a target nucleus is studied at bombarding energies above and below the Coulomb barrier. The effects of deformation of interacting nuclei and neutron transfer between them on the total and partial capture cross sections and the mean angular momentum of the captured system are studied. The results obtained for the {sup 16}O + {sup 112}Cd, {sup 152}Sm, and {sup 184}W; {sup 19}F +{sup 175}Lu; {sup 28}Si +{sup 94,100}Mo and {sup 154}Sm; {sup 40}Ca +{sup 96}Zr; {sup 48}Ca+ {sup 90}Zr; and {sup 64}Ni +{sup 58,64}Ni, {sup 92,96}Zr, and {sup 100}Mo reactions are in good agreement with available experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Resonance Structure of the Charge-Exchange Strength Function and Neutrino-Capture Cross Sections for the Isotopes {sup 71}Ga, {sup 98}Mo, and {sup 127}I

A resonance structure of the charge-exchange strength function S(E) and its effect on the neutrino-capture cross sections for the isotopes {sup 71}Ga, {sup 98}Mo, and {sup 127}I are studied within the self-consistent theory of finite Fermi systems. The calculation of the strength function S(E) takes into account Gamow–Teller, analog, and so-called lower lying pygmy resonances. The neutrino-capture cross sections σ(E) for the above three isotopes are calculated with allowance for the resonance structure of the strength function S(E), and the effect of each resonance on the energy dependence σ(E) is analyzed. It is found that all charge-exchange resonances in the strength function S(E) should be taken into account in calculating the neutrino-capture cross section σ(E) for the isotopes {sup 71}Ga, {sup 98}Mo, and {sup 127}I. The disregard of even highlying resonances leads to a substantial underestimation of the cross section σ(E), and this may affect the interpretation of respective experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron capture by light nuclei at astrophysical energies

Results: obtained in the studies of radiative neutron capture on light nuclei at thermal and astrophysical energies are reviewed. The capture reactions in question are part of the primordial nucleosynthesis reaction chain underlying formation and development of the Universe. The reactions are treated within the potential cluster model with orbital states of clusters classified by Young diagrams. It is demonstrated that the intercluster potentials obtained from the phase shift analysis and description of the main characteristics of bound nuclear states in cluster channels can be used for the analysis of radiative capture characteristics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The role of electron-electron interaction in the process of charge-carrier capture in deep quantum wells

The role of electron-electron interaction in the process of electron capture to a deep quantum well is investigated. Using two-level and three-level quantum wells as examples, the basic electron-capture mechanisms, i.e., the interaction with optical phonons and the Coulomb electron-electron interaction, are considered, and the corresponding capture probabilities and electron lifetimes are calculated. The effect of Auger recombination on the charge-carrier distribution in a quantum well is also taken into account. With this taken into consideration, a set of rate equations is solved for a nonsteady-state mode, and the time dependences of the electron concentration at the ground energy level in the quantum well are found. The contributions of each of the recombination processes under consideration are shown.

74 ATOMIC AND MOLECULAR PHYSICS↗

A Novel System for Carbon Dioxide Capture Utilizing Electrochemical Membrane Technology

FuelCell Energy, Inc. (FCE), in collaboration with Pacific Northwest National Laboratory (PNNL) and URS Corporation, is developing a novel Combined Electric Power and Carbon-Dioxide Separation (CEPACS) system, under a contract from the U.S. Department of Energy (DE-FE0007634), to efficiently and cost effectively separate carbon dioxide from the emissions of existing coal fired power plants. The CEPACS system is based on FCE’s electrochemical membrane (ECM) technology utilizing the Company’s internal reforming carbonate fuel cell products carrying the trade name of Direct FuelCell® (DFC®). The unique chemistry of carbonate fuel cells offers an innovative approach for separation of CO2 from existing fossil-fuel power plant exhaust streams (flue gases). The ECM-based CEPACS system has the potential to become a transformational CO2-separation technology by working as two devices in one: it separates the CO2 from the exhaust of other plants such as an existing coal-fired plant and simultaneously produces clean and environmentally benign (green) electric power at high efficiency using a supplementary fuel. The overall objective of this project is to successfully demonstrate the ability of FCE’s electrochemical membrane-based CEPACS system technology to separate ≥ 90% of the CO2 from a simulated Pulverized Coal (PC) power plant flue-gas stream and to compress the captured CO2 to a state that can be easily transported for sequestration or beneficial use. Also, a key project objective is to show, through a Technical and Economic Feasibility Study and bench scale testing (11.7 m2 area ECM), that the electrochemical membrane-based CEPACS system is an economical alternative for CO2 capture in PC power plants, and that it meets DOE objectives for the incremental cost of electricity (COE) for post-combustion CO2 capture.

direct fuel cells↗

Promoting CO 2 Release from CO 3 2- -Containing Solvents during Water Electrolysis for Direct Air Capture

The pH swings from water electrolysis are leveraged to condition OH – -based facile CO 2 capture solvents using an electrochemical flow cell for direct air capture (DAC). Besides demonstrating the DAC using a membrane contactor, promoting CO 2 release from a CO 3 2– solution at the anode is specifically studied by adjusting the volumetric flow rate, anode chamber volume, residence time, and K 2 CO 3 concentration. Through case-by-case comparisons coupled with modeled results, increasing current, reducing volumetric flow rate, and/or reducing CO 3 2– concentration are the effective methods to promote CO 2 release from a CO 3 2– -containing solvent, whereas enlarging the anode chamber volume poses a minor effect. Moreover, the discrepancies between the experimental and modeled results may be caused by H + crossover rather than K + transport through the Nafion membrane during water electrolysis based upon the total alkalinity measurements for the K 2 CO 3 solutions gleaned from the anode. Here, it is believed that such results will provide guidance to design and operate an electrochemical flow cell for electrochemistry-assisted DAC and point source CO 2 capture.

20 FOSSIL-FUELED POWER PLANTS↗

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity, bulk density, and fluid and time-lapse neutron capture cross section profiles of rock at times 0 day (baseline) through 14 days. First 9 sheets (each named after the corresponding CO2 push-pull simulation time) contains simulated pressure, saturation, temperature, salinity profiles and the corresponding effective elastic and neutron capture cross section profiles of rock matrix at the time of CO2 injection. Each sheet contains two sets of effective compressional velocity profiles of the rock, one based on Gassmann and the other based on Patchy saturation model. Effective neutron capture cross section calculations are done using a proprietary neutron cross-section simulator (SNUPAR) whereas for the thermodynamic properties of CO2 and bulk density of rock matrix filled with fluid, a standalone fluid substitution tool by Schlumberger is used. Last sheet in the file contains the bulk modulus of solid rock, which is inverted from the rock properties (porosity, sound speed etc) based on Gassmann model. Bulk modulus of solid rock in turn is used in the fluid substitution.

15 GEOTHERMAL ENERGY↗

Recent developments on polymeric membranes for CO 2 capture from flue gas

Polymeric membranes have been widely considered as one of the next-generation technologies for CO 2 capture from fossil fuel-derived flue gases. This separation modality requires novel polymeric materials that possess efficient CO 2 /N 2 separation properties, as well as chemical and mechanical stability for a multiyear membrane lifetime. In this paper, recent developments in polymeric membranes tailored for post-combustion carbon capture are reviewed. The selected polymeric materials encompass ether oxygen-rich polymers, polynorbornenes, ionic liquid membranes, and facilitated transport membranes. In each of the selected materials, noteworthy research efforts for material design and membrane formation are highlighted. The performances of the selected materials are compared in the CO 2 /N 2 selectivity-CO 2 permeance plot. As the only class of materials reviewed herein that have demonstrated the fabrication of thin-film composite membranes in scale, facilitated transport membranes have shown both high selectivity and permeance at relevant conditions for post-combustion carbon capture. Finally, comprehensive field tests are needed to resolve the technical gap between the material development and the commercial application.

20 FOSSIL-FUELED POWER PLANTS↗