Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aircraft Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

An analysis of parameters affecting ampacity in aircraft bipolar MVDC power cables via coupled electrical, thermal, and computational fluid dynamic modelling

Abstract The next generation of aircraft, including more electric aircraft and all‐electric aircraft (AEA), requires electric power systems with high power density and low system mass specifications. Increasing the voltage of the system to the range of a few kV, medium voltage (MV), is a reasonable approach to achieving high‐power‐density and low‐system‐mass EPSs for aircraft applications. Higher voltages, however, pose many challenges for aviation MV power cables such as arcs and arc tracking, partial discharges (PDs), and thermal management. In this regard, thermal management is more challenging since heat transfer by convection is greatly reduced at wide‐body aircraft's cruising altitudes due to the reduced air pressure. In this paper, a finite element method (FEM) model is developed in COMSOL Multiphysics for an aircraft bipolar MVDC (±5 kV) power cable. Using the model, the maximum permissible cable current at a low pressure of 18.8 kPa (at an altitude of 12.2 km from sea level, the usual cruising altitude for wide‐body aircraft) is calculated. Also, an analytical model is developed based on analytical and proven empirical correlations governing conductive, radiative, and convective heat transfers at the steady state to estimate the ampacity of the bipolar cable system at reduced pressure. It was shown that the proposed analytical model can be used for atmospheric pressure and systems with a larger number of poles, expanding its range of applications. The results of the FEM and analytical models correlate at wide ranges of parameters such as ambient temperature, duct size, distance between the positive and negative pole cables, and the overall diameter of the cables. The influence of horizontal and vertical arrangement of poles is included in the analytical model. The results of this study can be used to design bipolar MVDC power cable systems for the envisaged wide‐body AEA.

Azizi, Arian↗
NASA NTRS1974

Dynamic properties of aircraft tires

A research program has investigated the use of the von Schlippe string-type tire model for predicting the dynamic behavior of aircraft tires. The transfer-function method was used for theory evaluation. A more flexible two-constant modification to the string theory tire model is presented. Experiments were conducted on four types of scale model aircraft tires. Two types were of conventional bias construction, one type was an isotropic toroid, and one type was of unbelted radial construction. The conventional string theory and model gave predictions that were in good agreement with experimental data for bias constructed tires. The two-constant modification to string theory provided better agreement between predictions and experiment for the unconventional tires. The results indicate that the string theory tire model using static and slow-rolling tire properties predicts dynamic aircraft tire properties that have the same trends as the measured dynamic properties and, in most cases, provides good quantitative agreement.

Clark, S. K.↗
NASA NTRS1996

Comprehensive Analysis of Two Downburst-Related Aircraft Accidents

Although downbursts have been identified as the major cause of a number of aircraft takeoff and landing accidents, only the 1985 Dallas/Fort Worth (DFW) and the more recent (July 1994) Charlotte, North Carolina, landing accidents provided sufficient onboard recorded data to perform a comprehensive analysis of the downburst phenomenon. The first step in the present analysis was the determination of the downburst wind components. Once the wind components and their gradients were determined, the degrading effect of the wind environment on the airplane's performance was calculated. This wind-shear-induced aircraft performance degradation, sometimes called the F-factor, was broken down into two components F(sub 1) and F(sub 2), representing the effect of the horizontal wind gradient and the vertical wind velocity, respectively. In both the DFW and Charlotte cases, F(sub 1) was found to be the dominant causal factor of the accident. Next, the aircraft in the two cases were mathematically modeled using the longitudinal equations of motion and the appropriate aerodynamic parameters. Based on the aircraft model and the determined winds, the aircraft response to the recorded pilot inputs showed good agreement with the onboard recordings. Finally, various landing abort strategies were studied. It was concluded that the most acceptable landing abort strategy from both an analytical and pilot's standpoint was to hold constant nose-up pitch attitude while operating at maximum engine thrust.

Shen, J.↗
NASA NTRS1966

Wind-tunnel boundary interference for V/STOL TESTING

The wake skew angle used in applying the theory of NASA TR R-124 to data correction should be such that the angular deflection of the wake vorticity from the horizontal is one-half that calculated from momentum theory at the lifting element. This usage is in contrast to that of the original paper which used the angle of the mass flow. Because of large-scale recirculation effects, there is a finite lower limit to the test speed at which reliable and correctable data can be obtained in closed wind tunnels. Although a zero-correction wind tunnel for V/STOL testing has not yet been achieved, it is shown that the use of suitably mixed wind-tunnel boundaries can alleviate boundary effects on V/STOL data.

V/STOL AIRCRAFT↗
NASA NTRS1972

A study of jet impingement on curved surfaces followed by oblique introduction into a freestream flow

An experimental investigation of the temperature and velocity fields generated by a two-dimensional transverse jet was conducted. An approximate analysis of a deflected radial plane jet was developed. An analytical model of aircraft ingestion was extended to include computation of the inlet flow field. An investigation of the use of flaps as thrust reversers was initiated. Analyses of the impingement of a round incompressible and a round compressible jet on a arbitrary axisymmetric surface were completed. A computer study of the effects on performance of thrust reverser geometry was completed and the results compared with existing data. An experimental investigation of three-dimensional jet impingement on nonplane surfaces was also initiated.

Tatom, J. W.↗
NASA NTRS1972

Study of aircraft centered navigation, guidance, and traffic situation system concept for terminal area operation

A concept for automating the control of air traffic in the terminal area in which the primary man-machine interface is the cockpit is described. The ground and airborne inputs required for implementing this concept are discussed. Digital data link requirements of 10,000 bits per second are explained. A particular implementation of this concept including a sequencing and separation algorithm which generates flight paths and implements a natural order landing sequence is presented. Onboard computer/display avionics utilizing a traffic situation display is described. A preliminary simulation of this concept has been developed which includes a simple, efficient sequencing algorithm and a complete aircraft dynamics model. This simulated jet transport was flown through automated terminal-area traffic situations by pilots using relatively sophisticated displays, and pilot performance and observations are discussed.

Anderson, W. W.↗
NASA NTRS1972

STOL Traffic environment and operational procedures

The expected traffic environment for an intercity STOL transportation system is examined, and operational procedures are discussed in order to identify problem areas which impact STOL avionics requirements. Factors considered include: traffic densities, STOL/CTOL/VTOL traffic mix, the expect ATC environment, aircraft noise models and community noise models and community noise impact, flight paths for noise abatement, wind considerations affecting landing, approach and landing considerations, STOLport site selection, runway capacity, and STOL operations at jetports, suburban airports, and separate STOLports.

Schlundt, R. W.↗
NASA NTRS1974

Flush-mounted antennas radiating on aircraft type surfaces

The roll plane radiation patterns of on-aircraft antennas are analyzed using high frequency solutions. This is a basic study of aircraft-antenna pattern performance in which the aircraft is modelled in its most basic form. The fuselage is assumed to be a perfectly conducting elliptic cylinder with the antennas mounted near the top or bottom. The wings are simulated by arbitrarily many sided flat plates.

Burnside, W. D.↗
NASA NTRS1977

Miniature-angular-position transducer

Simple and inexpensive device, using solar cells, measures rapidly-responding active control surfaces of aeroelastically-scaled wind-tunnel models of aircraft. Device allows control surfaces to be measured to within 0.10 deg.

Gray, D. L.↗
NASA NTRS1975

A computer program for fitting smooth surfaces to three-dimensional aircraft configurations

A computer program developed to fit smooth surfaces to the component parts of three-dimensional aircraft configurations was described. The resulting equation definition of an aircraft numerical model is useful in obtaining continuous two-dimensional cross section plots in arbitrarily defined planes, local tangents, enriched surface plots and other pertinent geometric information; the geometry organization used as input to the program has become known as the Harris Wave Drag Geometry.

Craidon, C. B.↗
NASA NTRS1976

Volumetric pattern analysis of fuselage-mounted airborne antennas

A volumetric pattern analysis of fuselage-mounted airborne antennas at high frequencies was investigated. The primary goal of the investigation was to develop a numerical solution for predicting radiation patterns of airborne antennas in an accurate and efficient manner. An analytical study of airborne antenna pattern problems is presented in which the antenna is mounted on the fuselage near the top or bottom. Since this is a study of general-type commercial aircraft, the aircraft was modeled in its most basic form. The fuselage was assumed to be an infinitely long perfectly conducting elliptic cylinder in its cross-section and a composite elliptic cylinder in its elevation profile. The wing, cockpit, stabilizers (horizontal and vertical) and landing gear are modeled by "N" sided bent or flat plates which can be arbitrarily attached to the fuselage. The volumetric solution developed utilizes two elliptic cylinders, namely, the roll plane and elevation plane models to approximate the principal surface profile (longitudinal and transverse) at the antenna location. With the belt concept and the aid of appropriate coordinate system transformations the solution can be used to predict the volumetric patterns of airborne antennas in an accurate and efficient manner. Applications of this solution to various airborne antenna problems show good agreement with scale model measurements. Extensive data are presented for a microwave landing antenna system.

Yu, C. L.↗
NASA NTRS1976

High angle-of-attack stability-and-control analysis

Methods of linear systems analysis were applied to mathematical models of aircraft flying at high angle of attack and maneuver rate. First order longitudinal and lateral directional coupling is obtained by linearizing the complete nonlinear equations of motion about a generalized (quasi steady) trim point. Open loop stability boundaries are defined using the linear dynamic equations, and pilot in the loop effects are presented. Stability augmentation structures for maneuvering flight conditions are shown to be defined readily using optimal control theory.

Stengel, R. F.↗
NASA NTRS1977

Modeling and parameter uncertainties for aircraft flight control system design

Values of plant dynamic uncertainties for some recent aircraft design and development programs are given. Histories of pertinent aerodynamic, inertial, and structural parameter variations are given for a period of time from program initiation to aircraft certification. These data can be used as typical of future vehicles so that control system design concepts are evaluated with due consideration to their sensitivity to uncertainties in plant dynamics.

Mcdonnell, J. D.↗
NASA NTRS1977

Engine Non-Containment: The UK CAA View

Airworthiness accidents account for roughly one quarter of the total number of accidents to public transport turbojet aircraft. The most reliable, practicable, and cost-effective means of minimizing damage outside the confines of the nacelle is to make the aircraft design invulnerable to any debris which may affect the aircraft. A failure model was developed for use by aircraft builders in measuring the freedom from catastrophe factor of their design.

Gunstone, G. L.↗