Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AIRFOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

NASA Langley laminar flow control airfoil experiment

The design and construction of an advanced swept supercritical airfoil for commercial aircraft to be tested in a transonic wind tunnel is described. The swept LFC airfoil was designed for a given thickness ratio and lift coefficient, with emphasis placed on high critical Mach number with shock-free flow. It is compatible with satisfactory low speed and buffeting characteristics and minimizing the suction laminarization. Further emphasis was placed on achieving shock-free flow over a wide range of off-design conditions including trailing edge flap control. The requirements and design of the suction system and modifications to the Langley 8 foot transonic pressure tunnel is briefly described. Contouring of nonporous test section walls for free air simulation and flow quality improvements is included.

Harvey, W. D.↗

Investigation of passive shock wave-boundary layer control for transonic airfoil drag reduction

The passive drag control concept, consisting of a porous surface with a cavity beneath it, was investigated with a 12-percent-thick circular arc and a 14-percent-thick supercritical airfoil mounted on the test section bottom wall. The porous surface was positioned in the shock wave/boundary layer interaction region. The flow circulating through the porous surface, from the downstream to the upstream of the terminating shock wave location, produced a lambda shock wave system and a pressure decrease in the downstream region minimizing the flow separation. The wake impact pressure data show an appreciably drag reduction with the porous surface at transonic speeds. To determine the optimum size of porosity and cavity, tunnel tests were conducted with different airfoil porosities, cavities and flow Mach numbers. A higher drag reduction was obtained by the 2.5 percent porosity and the 1/4-inch deep cavity.

Nagamatsu, H. T.↗

Analytical studies of new airfoils for wind turbines

Computer studies were conducted to analyze the potential gains associated with utilizing new airfoils for large wind turbine rotor blades. Attempts to include 3-dimensional stalling effects were inconclusive. It is recommended that blade pressure measurements be made to clarify the nature of blade stalling. It is also recommended that new laminar flow airfoils be used as rotor blade sections.

Wentz, W. H., Jr.↗

An assessment of a modified potential flow code for calculating the effect of small geometric change on the pressure and forces of supercritical airfoils

Wind-tunnel test data for two closely related supercritical airfoils were compared with calculations obtained from a nonconservative, potential flow code over a Mach number range from 0.20 to 0.80. The potential flow code includes an iterated, integral boundary-layer correction. The theoretical pressure distributions correlated more closely with the experimental pressure distributions when the flow was entirely subsonic or subsonic with a small supersonic zone than when the flow contained a large supersonic zone. The predicted drag level was below the experimental values at nearly all test conditions and the difference in drag level for the two airfoils was not accurately predicted.

Hicks, R. M.↗

Measurement and prediction of mean velocity and turbulence structure in the near wake of an airfoil

An experimental investigation of the near wake of a thin airfoil at various incidence angles is reported in this paper. The airfoil (NACA 0012 basic thickness form) was located in a wind tunnel, and the wake structure was measured using hot-wire sensors. The measurements of mean-velocity, turbulence intensity and Reynolds-stress components across the wake at several distances downstream show the complex nature of the near wake and its asymmetrical behavior. The asymmetry in the wake property, which is maintained up to a length of 1.5 chords downstream of the trailing edge of the blade, is dependent on the incidence angle of the inlet flow. The streamwise velocity defect in an asymmetric wake decays more slowly compared to that of a symmetric wake. The streamline curvature due to the blade loading has a substantial effect on the mean velocity profile as well as the turbulence structure. The numerical study of the same wake indicates that the existing turbulence closure models need some modification to account for the asymmetric characteristics of the wake.

Hah, C.↗

Transient phenomena of shock-induced turbulent separation for a spikebody and stalling airfoil at transonic and supersonic speeds

The time-dependent, compressible, Reynolds-averaged, full Navier-Stokes equations are applied to solve an axisymmetric flow around a forward-facing stepbody (spikebody) at supersonic speeds and a stalling airfoil at transonic speeds. Important transient and unsteady phenomena, not yet well understood, are examined, and significant new findings of the present solution to the phenomena are discussed. The phenomena described in detail are as follows: The evolution of the shock wave pressure built up by the impact of the pressure waves, one from the trailing edge; the separation of the flow as influenced by the shock wave; the location of the reversed flow, the separation point, and the reattachment point; and the transient (or unsteady) phenomena of the flow pulsation, oscillation, and stalling of the body and airfoil wake flow. The numerical results show that the transient flow instability is caused by a supersonic jet induced in the separation bubble by the shock-bifurcation (lambda shock) mechanism between the separation shock and the reflected shock. Pulsation and stall phenomena are caused by a sudden increase in the leading-edge pressure due to the jet and the separation bubble interacting along the stagnation point flow.

Yoshikawa, K. K.↗

Shock Free Airfoil Cascades

The CAS22 computer program developed to provide for fast design and analysis of shock free airfoil cascades. CAS22 applicable to aerodynamic analysis and transonic shock free redesign of existing two-dimensional cascades of airfoils. Program is written in FORTRAN IV.

Dulikravich, D. S.↗

Analysis of airfoil leading edge separation bubbles

A local inviscid-viscous interaction technique was developed for the analysis of low speed airfoil leading edge transitional separation bubbles. In this analysis an inverse boundary layer finite difference analysis is solved iteratively with a Cauchy integral representation of the inviscid flow which is assumed to be a linear perturbation to a known global viscous airfoil analysis. Favorable comparisons with data indicate the overall validity of the present localized interaction approach. In addition numerical tests were performed to test the sensitivity of the computed results to the mesh size, limits on the Cauchy integral, and the location of the transition region.

Carter, J. E.↗

Wind-tunnel Investigation of Effects of Rear Upper Surface Modification on a NASA Supercritical Airfoil

Wind tunnel tests were conducted at Mach numbers from 0.60 to 0.81 to examine the effects on supercritical airfoil of modifying the rear upper surface to reduce the magnitude of an intermediate off design second velocity peak. The modification was accomplished by increasing the upper surface curvature around the 50 percent chord station and reducing the curvature over approximately the rearmost 30 percent of the airfoil while maintaining the same trailing edge thickness.

Harris, C. D.↗

Aerodynamic characteristics of two 10-percent-thick NASA supercritical airfoils with different upper surface curvature distributions

In order to assess the degree to which the characteristic region of low curvature of the supercritical airfoil can be practically extended on the upper surface, the aerodynamic characteristics of two supercritical airfoils with different upper surface curvature distributions were measured at Mach numbers from 0.60 to 0.81. Integrated section force and moment data, surface pressure distributions, and typical wake survey profiles are presented.

Harris, C. D.↗

A Wind-Tunnel Investigation of the Application of the NASA Supercritical Airfoil to a Variable-Wing-Sweep Fighter Airplane

An investigation was conducted in the Langley 8 foot transonic pressure tunnel and the Langley Unitary Plan wind tunnel to evaluate the effectiveness of three variations of the NASA supercritical airfoil as applied to a model of a variable wing sweep fighter airplane. Wing panels incorporating conventional NACA 64A series airfoil with 0.20 and 0.40 camber were used as bases of reference for this evaluation. Static force and moment measurements were obtained for wing leading edge sweep angles of 26, 33, 39, and 72.5 degrees. Fluctuating wing root bending moment data were obtained at subsonic speeds to determine buffet characteristics. Subsonic data were also obtained for determining the effects of wing transition location and spoiler deflection. Limited lateral directional data are included for the conventional 0.20 cambered wing and the supercritical wing.

Ayers, T. G.↗

Low-speed aerodynamic characteristics of a 17-percent-thick supercritical airfoil section, including a comparison between wind-tunnel and flight data

Wind-tunnel tests were conducted to determine the low speed two dimensional aerodynamic characteristics of a 17-percent-thick supercritical airfoil. The results were compared with three dimensional wind-tunnel and flight data. The tests were conducted over a Mach number range from 0.15 to 0.30. Reynolds numbers based on the airfoil chord varied from 2.0x10 to the 6th power to 15.0x10 to the 6th power.

Robert J McGhee↗

Low-speed aerodynamic characteristics of a 9.3-percent-thick supercritical airfoil section

An investigation was conducted in the Langley low turbulence pressure tunnel to determine the low-speed, two dimensional characteristics of a 9.3 percent-thick supercritical airfoil. The airfoil was tested at Reynolds numbers (based on chord) from 2.9 million to 16.8 million, at Mach numbers from 0.10 to 0.36, and at geometric angles of attack from -8 degrees to 14 degrees.

Noonan, K. W.↗

Comparison of the experimental aerodynamic characteristics of theoretically and experimentally designed supercritical airfoils

A lifting airfoil theoretically designed for shockless supercritical flow utilizing a complex hodograph method has been evaluated in the Langley 8-foot transonic pressure tunnel at design and off-design conditions. The experimental results are presented and compared with those of an experimentally designed supercritical airfoil which were obtained in the same tunnel.

Harris, C. D.↗

Aerodynamic Characteristics of a 14-Percent-Thick NASA Supercritical Airfoil Designed for a Normal-Force Coefficient of 0.7

This report documents the experimental aerodynamic characteristics of a 14 percent thick supercritical airfoil based on an off design sonic pressure plateau criterion. The design normal force coefficient was 0.7. The results are compared with those of the family related 10 percent thick supercritical airfoil 33. Comparisons are also made between experimental and theoretical characteristics and composite drag rise characteristics derived for a full scale Reynolds number of 40 million.

Harris, C. D.↗

Measuremants in the wake of an infinite swept airfoil

This is a report of the measurements in the trailing edge region as well as in the report of the developing wake behind a swept NACA 0012 airfoil at zero incidence and a sweep angle of 30 degrees. The measurements include both the mean and turbulent flow properties. The mean flow velocities, flow inclination and static pressure are measured using a calibrated three-hole yaw probe. The measurements of all the relevant Reynolds stress components in the wake are made using a tri-axial hot-wire probe and a digital data processing technique developed by the authors. The development of the three dimensional near-wake into a nearly two dimensional far-wake is discussed in the light of the experimental data. A complete set of wake data along with the data on the initial boundary layer in the trailing edge region of the airfoil are tabulated in an appendix to the report.

Novak, C. J.↗

Analysis of unswept and swept wing chordwise pressure data from an oscillating NACA 0012 airfoil experiment. Volume 1: Technical Report

The unsteady chordwise force response on the airfoil surface was investigated and its sensitivity to the various system parameters was examined. A further examination of unsteady aerodynamic data on a tunnel spanning wing (both swept and unswept), obtained in a wind tunnel, was performed. The main body of this data analysis was carried out by analyzing the propagation speed of pressure disturbances along the chord and by studying the behavior of the unsteady part of the chordwise pressure distribution at various points of the airfoil pitching cycle. It was found that Mach number effects dominate the approach to and the inception of both static and dynamic stall. The stall angle decreases as the Mach number increases. However, sweep dominates the load behavior within the stall regime. Large phase differences between unswept and swept responses, that do not exist at low lift coefficient, appear once the stall boundary is penetrated. It was also found that reduced frequency is not a reliable indicator of the unsteady aerodynamic response in the high angle of attack regime.

St.hilaire, A. O.↗

The structure of separated flow regions occurring near the leading edge of airfoils, including transition

Data was obtained for the NACA 663-018 airfoil in order to assess the advantages of tripping the boundary layer very near the leading edge for chord Reynolds numbers between 40,000 and 200,000. Single element trips were made from tape 2.5 mm wide and 0.15 mm thick. The unmodified tape trip in five thicknesses was placed across the span at 1.1% chord and the results of lift and drag measurements compared with the smooth airfoil case. Saw tooth geometry trips were also cut from tape and studied using five thicknesses. The saw tooth trips were placed across the span with the sharp points facing upstream at 1.1% chord and with the valley of the teeth at the 2.5% chord position. A large number of bumps and wiggles were produced in the lift coefficient versus angle of attack curves with various combinations of Reynolds number, thickness, and type of trips. The main result in the drag coefficient was an increase in C sub d min with increase in trip thickness.

Mueller, T. J.↗