Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Influence of ion site occupancies on the unit cell parameters, specific volumes, and densities of M 8 (AlSiO 4 ) 6 X 2 sodalites where M = Li, Na, K, Rb, and Ag and X = Cl, Br, and I

Here, this paper discusses the effects of composition on the unit cell parameter (a), unit cell volume (V), specific volume (v), and density (ρ) of various sodalite compositions including $M^+_8$(AlSiO 4 ) 6 Cl 2 (M = Li, Na, K, Rb, and/or Ag) and Na8(AlSiO 4 ) 6 $X^-_2$(X = Cl, Br, and/or I). Compositional models were developed, and the results show that the models are successful at predicting a, V, and v (and thus ρ) within the compositional range available in the literature. Discussion is included on the correlation between the ionic radii of the alkali metals and halides in the sodalite β-cages and the measured values of a, V, v, and ρ. The data show linear increases in a and ρ with increases in the average ionic radii of the M + and X - constituents (data for v show a linear decrease).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation of Cyclohexene Catalyzed by Nanoporous Au(Ag) in Liquid Phase

Nanoporous gold with minor silver content has been identified as a new type of gold based catalyst for selective oxidation of cyclohexene with molecular oxygen in liquid. By oxidation of the leached nanoporous gold foils in ozone, the minor silver content was oxidized in this paper to form silver oxide nanoclusters on the surface of nanoporous gold. With further treatment in methanol, the surface silver oxide was reduced and surface alloy was formed on gold ligaments. Both nanoporous gold treated with ozone only and the one with ozone and then methanol are very active for selective oxidation of cyclohexene with molecular oxygen in liquid of cyclohexene with a turn-over-frequency (TOF) of 0.55–0.99 molecules per surface Au atom per second under a solvent-free and initiator- free condition. The total selectivity for production of 2-cyclohexene-1-one, 2-cyclohexene-1-ol, and cyclohexene oxide was increased from 57.5 % to 80.8 % by an additional treatment of nanoporous gold in methanol after activation in zone. Finally, the correlation of catalytic selectivity for the production of the three products and corresponding surface chemistry of ligament suggests that (1) the formed Au–Ag alloy surface is favorable for the formation of 2-cyclohexen-1-one, 2-cyclohexene-1-ol, and cyclohexene oxide and (2) the surface silver oxide is favorable for the production of cyclohexenyl hydroperoxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A FirstPrinciple Study on the Magnetic Properties of Ag, Al, Li, Mg, and NaDoped ReS{sub 2} Monolayers

Magnetic properties of ReS{sub 2} monolayer doped with nonmagnetic metals (Ag, Al, Li, Mg, and Na) are studied by the first-principle method Different dopants and doping sites are considered. Similar to transition metal (TM) atoms, magnetic behavior appears in Al and Mg-doped systems. On the other hand, the calculated binding energies show that the Al-doped system has a more stable-formed system than the Mg-doped system. Hence, we study the ferromagnetic interaction in two Al-doped ReS{sub 2} monolayers. Interestingly, as the Al–Al distance increases, both ferromagnetic (FM) and nonmagnetic (NM) states are found. Our results deem that the FM coupling originates from a p-d exchange-like p-p coupling interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural-Phase States of Fe–Cu and Fe–Ag Bimetallic Particles Produced by Electric Explosion of Two Wires

X-ray phase analysis, transmission electron microscopy, and X-ray microanalysis were used to examine the structural-phase states of Fe–Cu and Fe–Ag bimetallic nanoparticles. The nanoparticles were obtained by the electric explosion of two twisted metal wires in argon atmosphere. It was demonstrated that the nanoparticles have the structure of Janus particles. Presence of the Janus particle structure in the samples indicates formation of binary melt under conditions of combined electric explosion of two wires. Phases based on supersaturated solid solutions were not found in the examined samples. The data obtained allow arguing that it is possible to achieve uniform mixing of the two-wire explosion products under the described experiment conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and crystal structures of nitratocobaltates Na{sub 2}[Co(NO{sub 3}){sub 4}], K{sub 2}[Co(NO{sub 3}){sub 4}], and Ag[Co(NO{sub 3}){sub 3}] and potassium nitratonickelate K{sub 2}[Ni(NO{sub 3}){sub 4}]

The cobalt(II) and nickel(II) nitrate complexes with an island structure (Na{sub 2}[Co(NO{sub 3}){sub 4}] (I) and K{sub 2}[Co(NO{sub 3}){sub 4}] (II)] and a chain structure [Ag[Co(NO{sub 3}){sub 3}] (III) and K{sub 2}[Ni(NO{sub 3}){sub 4}] (IV)] are synthesized and investigated using X-ray diffraction. In the anionic complex [Co(NO{sub 3}){sub 4}]{sup 2-} of the crystal structure of compound I, the Co coordination polyhedron is a twisted tetragonal prism formed by the O atoms of four asymmetric bidentate nitrate groups. In the anion [Co(NO{sub 3}){sub 4}]{sup 2-} of the crystal structure of compound II, one of the four NO{sub 3} groups is monodentate and the other NO{sub 3} groups are bidentate (the coordination number of the cobalt atom is equal to seven, and the cobalt coordination polyhedron is a monocapped trigonal prism). The crystal structures of compounds III and IV contain infinite chains of the compositions [Co(NO{sub 3}){sub 2}(NO{sub 3}){sub 2/2}]{sup -} and [Ni(NO{sub 3}){sub 3}(NO{sub 3}){sub 2/2}]{sup 2-}, respectively. In the crystal structure of compound III, seven oxygen atoms of one monodentate and three bidentate nitrate groups form a dodecahedron with an unoccupied vertex of the A type around the Co atom. In the crystal structure of compound IV, the octahedral polyhedron of the Ni atom is formed by five nitrate groups, one of which is terminal bidentate. The data on the structure of Co(II) coordination polyhedra in the known nitratocobaltates are generalized.

36 MATERIALS SCIENCE↗

Distributions of Ag, Bi, and Sb as Minor Elements between Iron-Silicate Slag and Copper in Equilibrium with Tridymite in the Cu-Fe-O-Si System at T = 1250 °C and 1300 °C (1523 K and 1573 K)

New experimental data on the distributions of silver (Ag), bismuth (Bi), and antimony (Sb) between liquid iron-silicate slag and liquid copper metal in equilibrium with tridymite in the Cu-Fe-O-Si system at T = 1250 °C and 1300 °C (1523 K and 1573 K) have been obtained. The experimental methodology involved high-temperature equilibration, rapid quenching of the equilibrated phases, followed by direct measurement of the equilibrium phases with electron probe X-ray microanalysis (EPMA) for measurement of major element concentrations and laser ablation inductively coupled plasma mass spectrometry (LAICPMS) for the measurement of minor element concentrations. The 4-point test approach was employed to confirm the achievement of chemical equilibrium in the current study. Open-system equilibration on quartz substrates in controlled gas atmospheres (CO/CO{sub 2}/Ar) and closed-system equilibration in sealed quartz ampoules were used. The new experimental data resolve significant discrepancies found in previous studies and can be used as input for the development of thermodynamic databases for copper-making processes.

36 MATERIALS SCIENCE↗

Experimental Investigation of Microstructure and Phase Transitions in Ag-Cu-Zn Brazing Alloys

Microstructure and phase transitions of selected brazing alloys from the Ag-Cu-Zn ternary system were investigated. Four ternary alloys with silver content in the compositional range from 25 to 60 wt.% were studied using x-ray diffraction (XRD) and scanning electron microscopy coupled with the energy-dispersive spectroscopy (SEM–EDS). Phase transitions of the investigated alloys were measured using differential scanning calorimetry (DSC). Experimentally obtained results were compared with the results of a thermodynamic calculation of the phase equilibria according to the CALPHAD method. The experiments confirmed the optimized thermodynamic parameters for the calculations from the thermodynamic assessment in literature. Phase compositions, liquidus and solidus temperatures were confirmed by the EDS and DTA methods. Additionally, the calculated solidification paths and predicted phase transformations were in agreement with the SEM images.

36 MATERIALS SCIENCE↗

Anomalous temperature-dependent Young's modulus of a cast LAST (Pb-Sb-Ag-Te) thermoelectric material

Thermomechanical characterization is important to material evaluation and device design in the development of thermoelectric technology. In this study, we utilize the resonant ultrasound spectroscopy (RUS) technique to examine the elastic behavior of a cast LAST (Pb Sb Ag Te) material with a composition of Ag0.86Pb19Sb1.0Te20 between room temperature and 823 K. The temperature-dependent Young s modulus exhibits a monotonically decreasing trend with increasing temperature. However, an abnormal slope change in the Young s modulus temperature curve around 500 K is observed. In addition, hysteresis between heating and cooling data in the temperature range of 450 550 K is observed, which appears to be dependent on the heating/cooling rate during the RUS experiments such that the hysteresis disappears when the heating/cooling rate was decreased from 5 to 2 K min 1. In this study we propose an order disorder transition model for the anomalous temperature-dependent Young s modulus behavior observed in this study.

36 MATERIALS SCIENCE↗

Evolution of the nanoporous microstructure of sintered Ag at high temperature using in-situ X-ray nanotomography

Silver pastes sintering is a potential candidate for die bonding in power electronic modules. The joints, obtained by sintering, exhibit a significant pore fraction, thus reducing the density of the material compared to bulk silver. The mechanical properties (Young's modulus, yield strength and ultimate tensile stress) are then drastically altered. However, while careful analysis of the nanoporous structure has been reported in 2D, little is known about its quantitative spatial evolution during thermal aging and more specifically during temperature jumps endured by the assembly during operation. High temperature evolutions of the 3D nanoporous structure have been observed in-situ using a heater fitted into the beamline 6-2c at SLAC-SSRL. Segmentation of the porosity and subsequent statistical analysis of the tomographic dataset reveal a complex evolution of the porous nanostructure including growth, separation and coalescence at a constant density. Such an analysis provides insight into the microstructural evolution of sintered nanoporous Ag joints in-service.

36 MATERIALS SCIENCE↗

Hall–Petch strengthening limit through partially active segregation in nanocrystalline Ag-Cu alloys

The breakdown from grain-size strengthening to softening mechanisms is generally well understood for high-purity nanocrystalline materials when the mean grain size decreases to the nanometer range. In nanocrystalline alloys, however, the stabilization of nanosized grains by grain-boundary solute segregation complicates the above mechanisms. Moreover, current segregation models have little predictive power for determining the optimal solute content that maximizes Hall-Petch strengthening effects. In this article, using large-scale hybrid Monte-Carlo/molecular dynamic simulations, we present a systematic study of the Hall–Petch breakdown in Cu-segregated Ag alloys with grain sizes ranging from 8 nm to 59 nm, where three concentration-dependent regimes of plasticity are described: (1) Classical segregation strengthening behavior at low solute contents, (2) shear band-induced softening at high solute contents, and (3) a previously unknown, but extended plateau of maximum strengths for intermediate solute contents from 4 to 15 at.%, which we term as nanocrystalline Sterling silver. We find that flow strengths in nanocrystalline Sterling alloys naturally exhibit a zero-slope limit at the smallest grain sizes that is well below the ideal Hall–Petch strengthening trend. This phenomenon results from partially active grain-boundary segregation that acts to influence interfacial plasticity in some, but not all, grain boundary regions. Our findings amplify the atomic nature of solute segregation and interaction at grain boundaries and its complex roles on grain boundary-mediated plasticity mechanisms in nanocrystalline alloys.

36 MATERIALS SCIENCE↗

Energy levels in Ag-like (4d{sup 10}4f, 4d{sup 10}5l (l = 0-3)), Pd-like (4d{sup 9}4f [J = 1], 4d{sup 9}5p [J = 1], 4d{sup 9}5f [J = 1]), and Rh-like (4d{sup 9} [J = 5/2, 3/2]) ions with Z {<=} 86

Relativistic perturbation theory with a model potential is used for the calculation of energy levels of the states 4f{sub 5/2}, 4f{sub 7/2}, 5s{sub 1/2}, 5p{sub 1/2}, 5p{sub 3/2}, 5d{sub 3/2}, 5d{sub 5/2}, 5f{sub 5/2}, and 5f{sub 7/2} above the 1s{sup 2}2s{sup 2}2p{sup 6}3s{sup 2}3p{sup 6}3d{sup 10}4s{sup 2}4p{sup 6}4d{sup 10} core, with one vacancy 4d{sub 5/2}{sup 9}, 4d{sub 7/2}{sup 9} in the same core, in the silver and rhodium isoelectronic sequences with the maximum nuclear charge Z = 86. The method of extrapolation of the model potential parameter is applied to calculate one-electron and one-vacancy wavefunctions. The wavefunctions of Ag- and Rh-like ions were used to calculate the energies of resonance transitions to the ground state {sup 1}S{sub 0} in Pd-like ions. Good agreement between the theoretical and the experimental energies of the resonance transitions in Pd-like ions indicates the reliability of the results obtained.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental study of single-electron detachment for Cu{sup −}, Ag{sup −}, Au{sup −}, Co{sup −}, and Ir{sup −} in collisions with Kr and Xe

The single electron detachment (SED) cross sections for Cu{sup −}, Ag{sup −}, Au{sup −}, Co{sup −}, and Ir{sup −} in collisions with Kr and Xe in the energy range of 10keV≤E≤30keV are measured by using the growth rate method in our experiments. The SED cross sections increase as the incident velocity increases. These data are compared with other available experimental data for the corresponding negative ions colliding with Ar. The affinities of the negative ions and the mass relation between the projectile and the target seem important in the electron detachment process.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Half-lives of 101 Rh g and 108 Ag m

Using long-term gamma-ray spectroscopy with high resolution germanium detectors and a ratio method, the half-lives of 101 Rh g and 108 Ag m have been determined to be 4.07 ± 0.05 years and 448 ± 27 years, respectively. These results are then compared with previously reported values.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dual atmosphere tolerance of Ag-CuO based air braze

Recently, a new braze filler metal based on the silver-copper oxide system was developed for use in sealing high-temperature, solid-state electrochemical devices such as solid oxide fuel cells. One of the concerns regarding the viability of this joining technique is the long-term stability of silver-based alloys under a high-temperature, dual oxidizing/reducing gas environment. This paper reports on an initial series of exposure experiments that were conducted to characterize the effects of (1) filler metal composition, (2) brazing temperature, and (3) exposure time on the microstructural stability of Ag-CuO brazed Al2O3/Al2O3 joints under a prototypic operating environment for an intermediate temperature solid oxide fuel cell stack. In general joints exposed simultaneously to air on one side and hydrogen on the other for short periods of time at 800°C (100 hrs) showed no signs of degradation with respect to hermeticity or joint microstructure. Samples exposed for longer periods of time (1000 hrs) displayed some internal porosity, which extends approximately halfway across the joint and is not interconnected. Little effect of the filler metal’s composition on its tolerance to dual atmosphere exposure was observed. However brazing temperature was found to have a measurable effect. Higher brazing temperature leads to a more extensive formation of an interfacial reaction phase, copper aluminate, which tends to tie up some of the free CuO in the filler metal and minimize the formation of porosity in the air brazed joints during long-term, dual-atmosphere exposure. The effect is due to the greater chemical stability of the copper aluminate relative to copper oxide.

08 HYDROGEN↗

Ag-Al based air braze for high temperature electrochemical devices

Silver-aluminum based air brazing was attempted using an in-situ alloying and brazing process. In this process, layers of foils of aluminum and silver were laid up between alumina plates in alternating fashion to achieve three target compositions representing Ag, Ag3Al, and Ag2Al phases. Each alloy composition revealed different microstructure, mechanical properties and fracture mechanisms. Joints brazed with foils containing 9.8 at% Al formed a long continuous layer parallel to the direction of the original aluminum foil. The fracture occurred through the interface between this long alumina layer and the braze filler, resulting in low bend strength (6 ~ 12 MPa). Joints containing 26.5 at% Al in the braze filler metal experienced the series of phase transformations, leading to cracks in as-brazed specimens. The fracture initiated through these pre-existing cracks, thus the joint strength observed in these specimens was extremely low. The joints prepared using foils with 35.1 at% Al exhibited a good interface even though interfacial alumina particles formed during air brazing. Crack propagation occurred through the interface between the alumina substrate and in-situ formed interfacial alumina particles or directly through these particles and the best bend strength (46 ~ 52 MPa) among Al-added braze compositions was achieved.

36 MATERIALS SCIENCE↗

An anomalous structure disordering in Zr–Cu–Ag supercooled glass-forming liquids

An anomalous ordering-to-disordering transition in a Zr–Cu–Ag supercooled glass-forming liquid has been revealed by in situ high-energy x-ray diffraction. Upon heating, the supercooled liquid exhibits a structural crossover at T c = 716 K, evident by the change in statistical characteristics of the first sharp diffraction peak. When annealed in the vicinity of T c , the supercooled liquid first relaxes from its initial state to a denser and more ordered state. Subsequently, it becomes disordered at the medium-range scale with a slowing down of densification, as demonstrated by the broadening of the first sharp diffraction peak and a decrease in the peak intensities of the higher atomic shells in the reduced pair distribution function. Finally, a scenario for the evolution of less correlated locally favored clusters in the liquid–liquid phase transition is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structures of the Ln{sub 4-x}In{sub 5-y}S{sub 13} (Ln=La, Ce, Pr and Nd; x=0.08-0.12, y=0.21-0.24), La{sub 3}In{sub 1.67}S{sub 7}, Gd{sub 3}InS{sub 6} and La{sub 4}Ag{sub 2}In{sub 4}S{sub 13} compounds

The orthorhombic crystal structures of the series of Ln{sub 4-x}In{sub 5-y}S{sub 13} (Ln=La, Ce, Pr and Nd; x=0.08-0.12, y=0.21-0.24) compounds were investigated by means of X-ray crystal diffraction. The crystals of La{sub 3}In{sub 1.67}S{sub 7} and Gd{sub 3}InS{sub 6} were also obtained unexpectedly from the La-In-S and Gd-In-S systems and no respective Gd{sub 4-x}In{sub 5-y}S{sub 13} was obtained. In the structures of the orthorhombic Ln{sub 4-x}In{sub 5-y}S{sub 13} series and hexagonal La{sub 3}In{sub 1.67}S{sub 7} indium atoms occupy disordered positions in the octahedral and trigonal antiprismatic arrangement of the sulphur atoms. The crystal structure of the La{sub 4}Ag{sub 2}In{sub 4}S{sub 13} is also given and discussed as an example of quaternary sulphide related to a ternary La-In sulphide. - Graphical abstract: In the series of the Ln{sub 4-x}In{sub 5-y}S{sub 13} (Ln=La, Ce, Pr and Nd; x=0.08-0.12, y=0.21-0.24) compounds the indium atoms occupy disordered position in the octahedral arrangement of the sulphur atoms. The tetrahedral position is ordered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lattice distortions in layered type arsenides LnTAs{sub 2} (Ln=La-Nd, Sm, Gd, Tb; T=Ag, Au): Crystal structures, electronic and magnetic properties

The lanthanide coinage-metal diarsenides LnTAs{sub 2} (Ln=La, Ce-Nd, Sm; T=Ag, Au) have been reinvestigated and their structures have been refined from single crystal X-ray data. Two different distortion variants of the HfCuSi{sub 2} type are found: PrAgAs{sub 2}, NdAgAs{sub 2}, SmAgAs{sub 2}, GdAgAs{sub 2}, TbAgAs{sub 2}, NdAuAs{sub 2} and SmAuAs{sub 2} crystallize as twofold superstructures in space group Pmcn with the As atoms of their planar layers forming zigzag chains, whereas LaAgAs{sub 2}, CeAgAs{sub 2} and PrAuAs{sub 2} adopt a fourfold superstructure (space group Pmca) with cis-trans chains of As atoms. The respective atomic positions can be derived from the HfCuSi{sub 2} type by group-subgroup relations. The compounds with zigzag chains of As atoms exhibit metallic behaviour while those with cis-trans chains are semiconducting as measured on powder pellets. The majority of the compounds including 4f elements show antiferromagnetic ordering at T{sub N}<20 K. - Text3: Zigzig vs. cis-trans.

36 MATERIALS SCIENCE↗