SEARCH · Engineering Papers

Results for “AFTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Airborne Doppler-lidar and ground-based Doppler radar observations of a thunderstorm in Oklahoma

The results of airborne Doppler-lidar and ground-based Doppler radar observations of multicellular storms, marked by heavy rainfall, strong surface outflow, and a gust-front tornado, on June 30, 1981 are analyzed. The airborne lidar comprised a CO2-laser operating in the IR region, which was discharged once each second at 20 deg fore and aft, alternatively, of the normal to the aircraft's heading, and a quarter-wave plate for registering the returning frequency-shifted beams. Wind fields are plotted taking into account the advection effects. The lidar data set is noted for its self-consistency, though limited to a range of 5 km by the high moisture levels. Fair agreement was found between the lidar-derived and radar-derived average ground-based radial wind fields, with discrepancies on the order of 1.5 m/s.

Bluestein, H. B.↗

NASA NTRS1985

Numerical simulation of flow through scramjet inlets using a three-dimensional Navier-Stokes code

A three-dimensional Reynolds-averaged Navier-Stokes code has been used to numerically analyze flow through a two-strut, supersonic combustion ramjet (scramjet) inlet configuration. It solves the governing equations in full conservation form using either the fully explicit or explicit-implicit method due to MacCormack. An algebraic two-layer eddy viscosity model is used for turbulent flow calculations. The analysis allows inclusion of end effects which are caused by the aft placement of the cowl on the underside of the inlet. A special grid has been developed to accommodate the struts embedded in the inlet flow field. Detailed numerical results are presented here for the two-strut configuration, and a comparison is made with the available experimental results.

Kumar, A.↗

NASA NTRS1985

Laser velocimeter measurements of the flow fields around single- and counter-rotation propeller models

A two-component LV system was used to make detailed measurements of the flow field around both a single-rotation and a counter-rotation propeller/nacelle. The conditions measured for the single-rotation tractor configuration include two different blade angles and two propeller advance ratios, and for the counter-rotation propeller configuration include both pusher and tractor mounts. The measurements show the increasing slipstream velocities and contraction with increasing blade angle and with decreasing advance ratios. Data for the counter-rotation system show that the aft propeller turns the flow in the opposite direction from the front propeller. Additionally, the LV system was used as a diagnostic tool to provide data to explain the large side force measured on the propeller/nacelle at angle-of-attack.

Dunham, D. M.↗

NASA NTRS1986

Composite Lightning Rods for Aircraft

Composite, lightweight sacrificial tip with graphite designed reduces lightning-strike damage to composite parts of aircraft and dissipates harmful electrical energy. Device consists of slender composite rod fabricated from highly-conductive unidirectional reinforcing fibers in matrix material. Rods strategically installed in trailing edges of aircraft wings, tails, winglets, control surfaces, and rearward-most portion of aft fuselage.

Bryan, Charles F., Jr.↗

NASA NTRS1985

Numerical procedure for three-dimensional hypersonic viscous flow over aerobrake configuration

A numerical method, which is simpler and more efficient than others currently in use, is proposed for the computation of the full viscous flow over an aerobrake body in hypersonic stream at high altitude. It treats the shock layer surrounding the blunt forebody and the near wake behind the base simultaneously by formulating the Navier-Stokes equations in conformal and azimuthal-angle coordinates. The computational domain is confined by the body wall, outflow surface and the shock, which is adjusted along the coordinate normal to the wall in the course of iterations. Because of the optimal grid and a well developed alternating direction implicit factorization technique for the governing equations, reasonably accurate results can be obtained with a 28 x 36 x 7 grid and 400 time-marching iterations. Excellent agreement of shock location is found between the present result and the schlieren photograph. Details of the base flow and shear layer impingement on the cylindrical aft body are presented for an adiabatic wall case.

Li, C. P.↗

NASA NTRS1985

Application of Gr/PMR-15 to commercial aircraft

Following from early experience with polyimides on the SST program and Shuttle aft flap studies the Boeing Company is now working on collaborative programs with its principal nacelle suppliers to pursue the development of Gr/PMR-15 nacelle components. Two programs are currently in effect. The first program is directed specifically towards the flight test and service evaluation at the earliest possible date of a 747 nacelle core cowl structure. The second program seeks to firmly establish the producibility and cost of a 757 thrust reverser C duct in a production environment. The near term objectives of these programs include: (1) the comparison of estimated cost and weight of Gr/PMR-15 versus metal structure, (2) the engine test of representative composite structure, (3) the preliminary design and analysis of the C duct structure, and (4) the preparation of cost data and time schedules for the development and producibility program. In addition to powerplant structure, the propulsion ducting system has shown to be a strong candidate for Gr/PMR-15 application. Currently, the Boeing 747 Organization is evaluating the use of PMR-15 matrix composites to replace nearly 800 lbs of titanium ducting per airplane.

Postlewaite, J.↗

NASA NTRS1985

The construction of airfoil pressure models by the plate method: Achievements, current research, technology development and potential applications

A method of constructing airfoils by inscribing pressure channels on the face of opposing plates, bonding them together to form one plate with integral channels, and contour machining this plate to form an airfoil model is described. The research and development program to develop the bonding technology is described as well as the construction and testing of an airfoil model. Sample aerodynamic data sets are presented and discussed. Also, work currently under way to produce thin airfoils with camber is presented. Samples of the aft section of a 6 percent airfoil with complete pressure instrumentation including the trailing edge are pictured and described. This technique is particularly useful in fabricating models for transonic cryogenic testing, but it should find application in a wide ange of model construction projects, as well as the fabrication of fuel injectors, space hardware, and other applications requiring advanced bonding technology and intricate fluid passages.

Lawing, P. L.↗

NASA NTRS1985

Aerospace vehicle

A dual structure aerospace vehicle is described which has an aeroshell structure and an internally disposed separable and reusable integral tank/thrust structure. The tank/thrust structure is inuslated for cryogenic fuels and the cavity within aeroshell is insulated from the tank/thrust structure. An internal support ring within the cavity serves as an attachment for lugs on the tank/thrust structure via double hinges. The aft end of tank/thrust structure is provided with rocket engines and exit nozzles with a trunnion supporting the tank/thrust structure within the aeroshell.

Jackson, L. R.↗

NASA NTRS1986

Controlled impact demonstration seat/cabin restraint systems: FAA

The FAA restraint system experiments consisted of 24 standard and modified seats, 2 standard galleys and 2 standard overhead compartments. Under the controlled impact demonstration (CID) program, the experimental objective was to demonstrate the effectiveness of individual restraint system designs when exposed to a survivable air-to-ground impact condition. What researchers were looking for was the performance exhibited by standard and modified designs, performance differences resulting from their installed cabin location, and interrelating performance demonstrated by test article and attaching floor and/or fuselage structure. The other restraint system experiment consisted of 2 standard overhead stowage compartments and 2 galley modules. Again, researchers were concerned with the retention of stowed equipment and carry-on articles. The overhead compartments were loaded with test weights up to their maximum capacity, and each of the galleys was filled with test articles: aft with normal galley equipment, forward with hazardous material test packages. A breakdown of instrumentation and distribution is given beginning with 11 instrumented type anthropomorphic dummies and 185 sensors which provided for acceleration and load measurements at the various experiment and associated structure locations. The onboard cameras provided additional coverage of these experiments, including the areas of cabin which were not instrumented. Test results showing the window-side leg forces versus pulse duration are given.

Johnson, R. A.↗

NASA NTRS1986

Report of the Presidential Commission on the Space Shuttle Challenger Accident, Volume 1

The findings of the Commission regarding the circumstances surrounding the Challenger accident are reported and recommendations for corrective action are outlined. All available mission data, subsequent tests, and wreckage analyses were reviewed and specific failure scenarios were developed. The Commission concluded that the cause of the Mission 51-L accident was the failure of the pressure seal in the aft field joint of the right solid rocket motor. The failure was due to a faulty design unacceptably sensitive to a number of factors. These factors were the effects of temperature, physical dimensions, the character of materials, the effects of reuse, processing, and the reaction of the joint to dynamic loading. In addition to analyzing the material causes of the accident, the Commission examined the chain of decisions that culminated in approval of the launch. It concluded that the decision making process was flawed in several ways including (1) failure in communication resulting in a launch decision based on incomplete and misleading information, (2) a conflict between engineering data and management judgements, and (3) a NASA management structure that permitted flight safety problems to bypass key Shuttle managers.

Rogers, W. P.↗

NASA NTRS1986

An investigation of the feasibility of active boundary layer thickening for aircraft drag reduction

The feasibility of using a forward mounted windmilling propeller to extract momentum from the flow around an axisymmetric body to reduce total drag has been studied. Numerical calculations indicate that a net drag reduction is possible when the energy extracted is returned to an aft mounted pusher propeller. However, net drag reduction requires very high device efficiencies. Results of an experimental program to study the coupling between a propeller wake and a turbulent boundary layer are also reported. The experiments showed that a complex coupling exists and simple modes for the flow field are not sufficiently accurate to predict total drag.

Ash, R. L.↗

NASA NTRS1986

Impact data from a transport aircraft during a controlled impact demonstration

On December 1, 1984, the FAA and NASA conducted a remotely piloted air-to-ground crash test of a Boeing 720 transport aircraft instrumented to measure crash loads of the structure and the anthropomorphic dummy passengers. Over 330 time histories of accelerations and loads collected during the Full-Scale Transport Controlled Impact Demonstration (CID) for the 1-sec period after initial impact are presented. Although a symmetric 1 deg. nose-up attitude with a 17 ft/sec sink rate was planned, the plane was yawed and rolled 13 deg. at initial (left-wing) impact. The first fuselage impact occurred near the nose wheel well with the nose pitched down 2.5 deg. Peak normal (vertical) floor accelerations were highest in the cockpit and forward cabin near the nose wheel well and were approximately 14G. The remaining cabin floor received normal acceleration peaks of 7G or less. The peak longitudinal floor accelerations showed a similar distribution, with the highest (7G) in the cockpit and forward cabin, decreasing to 4G or less toward the rear. Peak transverse floor accelerations ranged from about 5G in the cockpit to 1G in the aft fuselage.

Fasanella, E. L.↗

NASA NTRS1984

Helicopter stall alleviation using individual-blade control

A new, advanced type of active control for helicopters and its application to the solution of rotor aerodynamic and aeroelastic problems is described. Each blade is individually controlled in the rotating frame over a wide range of frequencies up to the sixth harmonic of rotor speed. The paper describes the design of a system controlling retreating blade stall, and the testing of the system on a model rotor in the wind tunnel. The control inputs considered are higher harmonic blade pitch changes at 2P and 3P, of amplitude and phase such that rotor loading is increased in the fore and aft portions of the rotor disk while rotor loading is reduced on the lateral portions. In this manner retreating blade stall may be alleviated, with corresponding reduction in rotor power requirements and vibration.

Ham, N. D.↗

NASA NTRS1986

An experimental study of the lift, drag and static longitudinal stability for a three lifting surface configuration

The experimental procedure and aerodynamic force and moment measurements for wind tunnel testing of the three lifting surface configuration (TLC) are described. The influence of nonelliptical lift distributions on lift, drag, and static longitudinal stability are examined; graphs of the lift coefficient versus angle of attack, the pitching moment coefficient, drag coefficient, and lift to drag ratio versus lift coefficient are provided. The TLC data are compared with the conventional tail-aft configuration and the canard-wing configuration; it is concluded that the TLC has better lift and high-lift drag characteristics, lift to drag ratio, and zero-lift moments than the other two configurations. The effects of variations in forward and tail wind incidence angles, gap, stagger, and forward wind span on the drag, lift, longitudinal stability, and zero-lift moments of the configuration are studied.

Ostowari, C.↗

NASA NTRS1986

Flight effects on noise from coaxial dual flow. I - Unheated jets

The effects of flight on sound radiated from embedded, uncorrelated ring sources convecting along the midst of the primary and the secondary streams of a coaxial dual flow which emerges from a moving nozzle into the ambience are studied. Cold jets are examined. The problem is posed as a double vortex-sheet flow model which involves deliberate suppression of inherent instabilities of the flow and is formulated, as a linear problem, in terms of the combined contributions of two independent uncorrelated quadrupole-type ring sources, the one convecting in the primary flow representing the sources generated due to the interaction at the primary/secondary interface and the other convecting in the secondary flow representing the sources generated due to the interaction at the secondary/ambient interface. The analysis shows that the effects of flight induce: (1) amplication of noise in the forward quadrant, (2) reduction of noise in the aft quadrant and (3) absolutely no impact on radiation of noise at Theta = 90 deg to the jet axis.

Dash, R.↗

NASA NTRS1986

Space Shuttle filament wound case compressive strength study. I - Testing

Immediately before liftoff, ignition of the Space Shuttle main engines places a significant bending moment on the filament wound cases of the solid rocket booster motors. This results in substantial compressive loading of the aft end of the composite case which, because of attachment requirements, has a complicated design including inserted broadgoods and helical ply dropoffs. To investigate the performance of the filament wound cases during the prelaunch load environment, a comprehensive study was initiated which included both testing and analysis. The results of the test program, which included testing of several full-scale and over three hundred subscale articles, will be described. The test program began with a short development effort to establish appropriate subscale test specimens for determining the material compressive strengths. Once these were established, a more comprehensive test program was initiated to determine the effects on strength of both processing and design changes. Full-scale cases were tested in a simulated prelaunch bending environment in order to validate the analysis predictions. In all tests, special attention was given to observation of the failure sequence which involved a complex process of load transfer from the region of helical ply dropoffs to the broadgood termination region.

Madsen, C. B.↗

NASA NTRS1986

Flight research on natural laminar flow nacelles - A progress report

This paper presents a progress report on an ongoing flight experiment for natural laminar flow nacelles. The results given herein were obtained during the first phase of the experiment, in which an instrumented natural laminar flow nacelle fairing was flight tested in the presence of turbofan engine noise and a controlled noise source. The results indicate that with the controlled noise source off, natural laminar flow was measured as far aft as 37 percent of the fairing length. The transition front was irregular in contour, and the extent of natural laminar flow was significantly affected by the relative flow angle for the fairing. In addition to these test results, the paper discusses the results of some recent computational analyses to predict pressure distributions and transition location, and to explain some of the data trends. Comparisons between measured and predicted data indicate that the analytical methods successfully predicted trends for the baseline (no controlled noise source) studies.

Hastings, E. C., Jr.↗

NASA NTRS1985

X-29 initial flight test results

It is announced that the X-29 forward-swept-wing (FSW) aircraft has been built, with flight testing under way and proceeding smoothly. The X-29 is a single-seat, single-engine supersonic aircraft that blends an optimized FSW, a close-coupled near-coplar canard, an F-5A forward fuselage module employing two side-mounted engine inlets, and a new aft fuselage. An F404-GE-400 engine with afterburner provides about 16,000 lb of thrust. The X-29 was designed to be near neutrally stable in the supersonic region to minimize drag; it becomes highly unstable transonically and subsonically, which dictates the use of a computerized fly-by-wire flight control system capable of stabilizing the aircraft. The X-29 advanced technology demonstrator began flight testing on Dec. 14, 1984; by Sept. 26, 1985, its envelope had been expanded to 0.75 Mach, 350 knots estimated airspeed, and 30,000 feet altitude. The aircraft has flown with very few problems and aerodynamic, structural, and control system results have correlated well with predictions. Areas where prediction and performance are not so well correlated are noted.

Ishmael, S. D.↗