Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Optimization of hot workability and microstructure control in a 12Cr-10Ni precipitation hardenable stainless steel: An approach using processing maps

Highlights: • Deformation processing map was developed for a 12Cr10Ni precipitation hardenable martensitic stainless steel and optimized hot working parameters were suggested to obtain defect free products. • The ‘stable’ domain of the processing maps were correlated to the dynamic recrystallization in the austenite phase and further confirmed by detailed microstructural investigations. • The DRx domain showed a refinement of the martensite packet size and of the prior transformation austenite grain size, essential to obtain the desired mechanical properties. - Abstract: Optimization of hot working parameters and corresponding microstructure control were explored in a 12Cr-10Ni precipitation hardenable martensitic stainless steel. From hot compression tests, 1073–1373 K (800°–1100 °C) and five (0.001–10 s{sup −1}) different strain rates, processing maps were developed, and various domains of microstructure evolution (in the austenite phase) were identified. The stable domain of the processing maps appeared to indicate dynamic recrystallization (DRx) in the austenite phase: as evident by the appearance of inflection point in the strain hardening rate versus flow stress plots. The suspected DRx domain was further confirmed by detailed microstructural investigations of the respective water-quenched specimens. The DRx domain showed a refinement of the martensite packet size and of the prior transformation austenite grain size. The later was shown with optical microstructure and reconstructed (modelled) microtexture data of the prior austenite grains. Additionally, the DRx domain showed a significant difference in activation energy as estimated from appropriate constitutive modelling.

36 MATERIALS SCIENCE↗

Synthesis, structural and dielectric properties of Ce-doped lead lanthanum titanate

Highlights: • The effect of Ce doping on the structural, dielectric properties and ac conductivity of Pb{sub 0.79-x}Ce{sub x}La{sub 0.21}TiO{sub 3} was studied. • A pseudo-cubic single phase was observed for all samples. • The phase transition temperature is found to decrease with increasing Ce content. • Change of the nature of Pb{sub 0.79}La{sub 0.21}TiO{sub 3} phase transition upon Ce-doping. • Several essential dielectric parameters were extracted. - Abstract: The influence of Ce doping on the structural, dielectric and ac conductivity properties of Pb{sub 0.79-x}Ce{sub x}La{sub 0.21}TiO{sub 3} powders (x = 0, 0.01, 0.03, 0.05 and 0.1) was investigated. X-ray diffraction shows that all samples have the pseudo-cubic crystal structure, in which the tetragonality and cell volume decrease with increasing Ce content. The change of the dielectric constant as a function of temperature demonstrates that the phase transition temperature decreases with the increase of Ce content. Normal behavior of the phase transition from ferroelectric to paraelectric was observed for Ce-doped samples, while the undoped powders exhibit a combination of diffuse phase transition and relaxor behaviors. From electrical conductivity versus 1/T plots, we have determined the activation energy, which was found to increase with increasing Ce concentration.

36 MATERIALS SCIENCE↗

The Effect of Mechanical Milling Period on Conductivity of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} System

One of the most important criteria in determining the best electrolyte is by obtaining good value of conductivity. In this research, Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} system will be prepared in order to find the optimum composition and heat treatment of the samples that gives good conductivity value. The effects of mechanical milling period on glass-ceramics electrolyte in the system Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} have been investigated using X-Ray differential analysis and electrochemical impedance spectroscopy. Mechanical milling (MM) method was used to prepare the system which was converted into glass-ceramics by milled at several periods of time from 2 hours to 8 hours. Some crystalline phases with slight amorphous nature were detected in samples prepared by mechanical milling for 8 hours while single phase of LiTi{sub 2}(PO{sub 4}){sub 3} were obtained from samples that underwent further heat treatment. The sample treated at 250 deg. C for 4 hours obtained highest conductivity with a value of 1.12x10{sup 4} Scm{sup -1}. The activation energy was found to be as low as 0.08 eV.

36 MATERIALS SCIENCE↗

Synthesis and characterization of CdSe quantum dots dispersed in PVA matrix by chemical route

CdSe quantum dots using polyvinyl alcohol as a capping agent have been synthesized via a simple heat induced thermolysis technique. The structural analysis of CdSe/PVA thin film was studied by X-ray diffraction, which confirms crystalline nature of the prepared film. The surface morphology and particle size of the prepared sample was studied by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The SEM studies of CdSe/PVA thin film shows the average size of particles in the form of clusters of several quantum dots in the range of 10-20 nm. The morphology of CdSe/PVA thin film was further examined by TEM. The TEM image shows the fringes of tiny dots with average sizes of 4-7 nm. The optical properties of CdSe/PVA thin film were studied by UV-VIS absorption spectroscopy. The CdSe/PVA quantum dots follow the role of direct transition and the optical band gap is found to be 4.03 eV. From dc conductivity measurement, the observed value of activation energy was found to be 0.71 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanistic Insights into the Conversion of Biorenewable Levoglucosanol to Dideoxysugars

Here, a molecular understanding of the conversion of biorenewable threo- and erythro-levoglucosanol (LGOL) to 3,4-dideoxysugars in aqueous medium is provided based on first-principles simulations. The synthetic importance of this transformation is that these intermediates can be quantitatively hydrogenated to (S,S)/(S,R) hexane-1,2,5,6-tetrol (tetrol), whose stereochemistry depends on which dideoxy sugar intermediates are formed during LGOL conversion. The thermodynamic and kinetic feasibility of the acetal (R 2 C(OR) 2 ) hydrolysis in LGOL is investigated via computing the free energy profile. In aqueous medium, the rate-determining step of LGOL hydrolysis is the protonation of the anhydro-bridge oxygen atom of LGOL concurrent with ring opening, yielding the cyclic forms of 3,4-dideoxymannose (DDM) and 3,4-dideoxyglucose (DDG) from threo- and erythro-LGOL, respectively. The measured activation energies of LGOL hydrolysis are 20.5 and 23.6 kcal/mol for DDM and DDG formation, respectively. These values are in agreement with the computed protonation free energies of 17.1 and 18.2 kcal/mol, respectively. Based on the simulations, a Bronsted base-catalyzed isomerization from DDG or DDM to 3,4-dideoxy fructose (DDF) is preferred with lower apparent activation free energy barriers compared to the acid-catalyzed isomerization. In summary, this study provides mechanistic information about the conversion of the biomass-derived anhydro-sugar LGOL to 3,4-dideoxy sugars, which are precursors to renewable high-value chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of structural anisotropy on electronic conduction in delafossite tin doped copper indium oxide thin films

Sn doped CuInO{sub 2} thin films having a single delafossite phase have been synthesized by magnetron sputtering technique. A gradual decrease in the activation energy from 0.43 to about 0.10 eV and a large increase in conductivity are observed in Sn doped samples with increasing fraction of crystallites having (006) orientation due to an increase in substrate temperature. Due to thermally activated carrier transport along O-A-O layers and activated carrier generation along BO{sub 6} layers, crystallite orientation becomes a crucial factor in controlling the conduction in delafossite thin films.

36 MATERIALS SCIENCE↗

Donor-acceptor pair recombination luminescence from monoclinic Cu{sub 2}SnS{sub 3} thin film

The defect levels in Cu{sub 2}SnS{sub 3} (CTS) were investigated using photoluminescence (PL) spectroscopy. A CTS thin film was prepared on a soda-lime glass/molybdenum substrate by thermal co-evaporation and sulfurization. The crystal structure was determined to be monoclinic, and the compositional ratios of Cu/Sn and S/Metal were determined to be 1.8 and 1.2, respectively. The photon energy of the PL spectra observed from the CTS thin film was lower than that previously reported. All fitted PL peaks were associated with defect related luminescence. The PL peaks observed at 0.843 and 0.867 eV were assigned to donor-acceptor pair recombination luminescence, the thermal activation energies of which were determined to be 22.9 and 24.8 meV, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Studies of Some Cerium Doped Strontium Stannate Synthesized by Solid State Route

Cerium doped ceramic compositions SrSn{sub 1-x}Ce{sub x}O{sub 3} (x = 0.00 ,0.01, 0.02, 0.04) have been synthesized by solid state reaction route and structurally characterized using x-ray diffraction. X-ray diffraction confirms the formation of single phase compositions having orthorhombic perovskite structure for all compositions. The lattice parameters change with cerium doping. Percentage experimental density decreases from 87.9% in undoped composition to 72.6%, 70.6%, 66.5% respectively with increase in cerium doping indicating that cerium is going to Sr site. The temperature dependent dielectric behavior shows low frequency dielectric dispersion at higher temperature and a weak dielectric anomaly emerging in the temperature range around 250 deg. C. D.C. and A.C. electrical conductivity variation with temperature and frequency show that the d.c. conductivity of the sample in lower temperature region is few orders of magnitude less than the a.c. conductivity and its variation with temperature is also different. The activation energy barriers for a.c. and d.c. conduction is also different.

36 MATERIALS SCIENCE↗

Influence of bias voltage and temperature on charge transfer states in organic photovoltaic and electroluminescent integrated device

Based on the organic photovoltaic (PV) and electroluminescent (EL) integrated device with a structure of SubPc/C{sub 60} heterojunction, both PV and EL properties of charge transfer states (CTSs) were simultaneously investigated. By means of infrared and visible isolating method, the EL characteristics of CTSs and singlet-triplet excitons were separated, and their properties dependence on bias voltage and temperature was analyzed by introducing modified diode models. From the simulation on the emissive photons from CTSs, the temperature independent parameters of CTSs were extracted, which have close relationship with thermal activation energy and effective emissive state number of CTSs at the SubPc/C{sub 60} interface.

36 MATERIALS SCIENCE↗

Characterizations on the microstructures of LiMn{sub 2}O{sub 4} prepared by a simple soft-chemical technique

LiMn{sub 2}O{sub 4} powders were prepared by a simple soft-chemical technique at different temperatures. X-ray diffraction and thermogravimetric analysis suggested that the material prepared at 800 deg. C was stoichiometric LiMn{sub 2}O{sub 4}, whereas those prepared at 600 and 700 deg. C were Li[Mn{sub 0.77}{sup 3+}Mn{sub 1.23}{sup 4+}]O{sub 4.115} and Li[Mn{sub 0.85}{sup 3+}Mn{sub 1.15}{sup 4+}]O{sub 4.075}. Several typical XRD peaks of the compounds were investigated with an aim to elucidate (i) the Li immigration to the 16d octahedral sites, (ii) the partial tetragonal phase transition of the material and (iii) the mean coherent domain size and microstrain. SEM study showed that the particle size of the materials increased with heating temperature. The activation energy for the material particle growth was determined as 30.4 kJ mol{sup -1}.

36 MATERIALS SCIENCE↗

Anomalous reduction of the switching voltage of Bi-doped Ge{sub 0.5}Se{sub 0.5} ovonic threshold switching devices

Switching devices based on Ovonic Threshold Switching (OTS) have been considered as a solution to overcoming limitations of Si-based electronic devices, but the reduction of switching voltage is a major challenge. Here, we investigated the effect of Bi-doping in Ge{sub 0.5}Se{sub 0.5} thin films on their thermal, optical, electrical properties, as well as on the characteristics of OTS devices. As Bi increased, it was found that both of the optical energy gap (E{sub g}{sup opt}) and the depth of trap states decreased resulting in a drastic reduction of the threshold voltage (V{sub th}) by over 50%. In addition, E{sub g}{sup opt} was found to be about three times of the conduction activation energy for each composition. These results are explained in terms of the Mott delocalization effect by doping Bi.

36 MATERIALS SCIENCE↗

Role of WO{sub 3} on DC conductivity and some optical properties of TeO{sub 2} based glasses

Graphical abstract: Display Omitted Highlights: ► TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system was prepared using melt quenching method. ► DC conductivity, FESEM, EDS and optical absorption studies were carried out. ► Non bridging oxygens (NBOs) are increases with increase of WO{sub 3} content. ► Increase in NBOs is responsible for the increase in the refractive index of glasses. ► Two charge transport mechanisms are coexist in these glasses. -- Abstract: DC electrical conductivity and optical absorption studies have been employed to understand the influence of WO{sub 3} content on the electrical and optical properties of the TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system. Field emission scanning electron microscope (FESEM), Energy dispersive X-ray spectrometry (EDS) measurements have been used to confirm the glassy nature and the elemental analysis of the glass composition, respectively. DC electrical conductivity of the glasses was studied in the temperature range 423–613 K. From Arrhenius plot, the activation energies (E{sub act}) of all the glasses have been calculated and conduction mechanism has been discussed in terms of structural changes occurred with the addition of WO{sub 3} content. The optical properties such as optical band gap (E{sub opt}), Urbach energy (ΔE), molar refraction (R{sub M}), metallization criterion (M), electronic polarizability of the oxide ion (α{sub O{sup 2}{sup −}}) and refractive index (n) have been determined from optical absorption data and were found to be composition dependent.

36 MATERIALS SCIENCE↗

Influence of silver nanoparticles on relaxation processes and efficiency of dipole – dipole energy transfer between dye molecules in polymethylmethacrylate films

The fluorescence and phosphorescence of dyes in thin polymethylmethacrylate (PMMA) films in the presence of ablated silver nanoparticles has been investigated in a wide temperature range by methods of femtosecond and picosecond laser photoexcitation. The fluorescence and phosphorescence times, as well as spectral and kinetic characteristics of rhodamine 6G (R6G) molecules in PMMA films are measured in a temperature range of 80 – 330 K. The temperature quenching activation energy of the fluorescence of R6G molecules in the presence of ablated silver nanoparticles is found. The vibrational relaxation rate of R6G in PMMA films is estimated, the efficiency of the dipole – dipole electron energy transfer between R6G and brilliant green molecules (enhanced by plasmonic interaction with ablated silver nanoparticles) is analysed, and the constants of this energy transfer are determined. (nanophotonics)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Consequences of Ca multisite occupation for the conducting properties of BaTiO{sub 3}

In combination with the dielectric modulus formalism and theoretical calculations, a newly developed defect incorporation mode, which is a combination of the standard A- and B-site doping mechanisms, is used to explain the conducting properties in 5 mol% Ca-doped BaTiO{sub 3}. Simulation results for Ca solution energies in the BaTiO{sub 3} lattice show that the new oxygen vacancy inducing mixed mode exhibits low defect energies. A reduction in dc conductivity compared with undoped BaTiO{sub 3} is witnessed for the incorporation of Ca. The conducting properties of 5 mol% Ca-doped BaTiO{sub 3} are analyzed using molecular dynamics and impedance spectroscopy. The ionic conductivity activation energies for each incorporation mode are calculated and good agreement with experimental data for oxygen migration is observed. The likely existence of the proposed defect configuration is also analyzed on the basis of these methods. - Graphical abstract: Oxygen vacancy formation as a result of self-compensation in Ca-doped BaTiO{sub 3}.

36 MATERIALS SCIENCE↗

Evaluation of Superconducting Properties and Diffusion Behavior of Ex Situ and In Situ Bulk MgB{sub 2} Materials with Ni Coating

Ex situ and in situ bulk MgB{sub 2} superconducting materials have successfully been produced by the simple amorphous boron and nano-amorphous boron powders with the processes of ball milling, pressing, and annealing. The superconducting properties and diffusion behavior of MgB{sub 2} samples after nickel (Ni) coating process have been characterized and compared to the microstructure and performance of uncoated (bare) MgB{sub 2} bulk sample. One surface of MgB{sub 2} superconductor sample was coated with a thin Ni layer of about 50 − 60μm thickness using vapor deposition techniques in versatile high vacuum coater, then every sample was annealed at temperatures between 923 and 1123 K for 1 h. The role of annealing temperature on physical, electrical, superconducting, and structural characterizations of bare and Ni-coated ex situ/in situ MgB{sub 2} bulk superconductors has been studied using X-ray diffraction and dc electrical resistivity versus temperature measurements. Finally, the Ni diffusion coefficients (D{sub Ni} = D{sub 0}exp(E/k{sub B}T)) are calculated in the temperature range to calculate the required minimum activation energy value for the Ni atoms/ions into the ex situ MgB{sub 2} crystal structure for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrasound-Assisted Leaching and Kinetic Study of Blended Copper Slag

This article deals with the dissolution of blended copper slag (flash and converter furnace) in hydrogen peroxide and acetic acid in the presence of ultrasound. The parameters that are effective on leaching efficiency, such as leaching temperature, leaching time, ultrasound power, acetic acid concentration, and hydrogen peroxide concentration, were investigated. The optimum leaching conditions for maximum copper dissolution (93 pct) and minimum iron dissolution (3 pct) were determined as follows: 2 M H{sub 2}O{sub 2}, 4 M CH{sub 3}COOH, 10 pct of ultrasound power, 65 °C of leaching temperature, 60 minutes of leaching time, and 1:25 of solid–liquid ratio. According to the Brunauer–Emmett–Teller (BET) analysis results on the original sample and leaching residue, the ultrasound caused formation of microcracks on the particle surface; however, the BET surface area increased and the mean adsorption pore width decreased. The apparent activation energy was found to be 55.35 kJ/mol, and the kinetics equations of the processes were established.

36 MATERIALS SCIENCE↗