Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thin membrane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Theoretical Prediction and Experimental Verification of IrO x Supported on Titanium Nitride for Acidic Oxygen Evolution Reaction

Reducing iridium (Ir) catalyst loading for acidic oxygen evolution reaction (OER) is a critical strategy for large-scale hydrogen production via proton exchange membrane (PEM) water electrolysis. However, simultaneously achieving high activity, long-term stability, and reduced material cost remains challenging. To address this challenge, we develop a frame-work by combining density functional theory (DFT) prediction using model surfaces and proof-of-concept experimental ver-ification using thin films and nanoparticles. DFT results predict that oxidized Ir monolayers over titanium nitride (IrO x /TiN) should display higher OER activity than IrO x while reducing Ir loading. Further, this prediction is verified by depositing Ir monolayers over TiN thin films via physical vapor deposition. The promising thin film results are then extended to commercially viable powder IrO x /TiN catalysts, which demonstrate a lower overpotential and higher mass activity than commercial IrO 2 , and a long-term stability of 250 hours to maintain a current density of 10 mA cm -2 . The superior OER performance of IrO x /TiN is further confirmed using proton exchange membrane water electrolyzer (PEMWE), which shows a lower cell voltage than commercial IrO 2 to achieve a current density of 1 A cm -2 . Both DFT and in situ X-ray absorption spectroscopy reveal that the high OER performance of IrO x /TiN strongly depends on the IrO x - TiN interaction via direct Ir-Ti bonding. This study highlights the importance of close interaction between theoretical prediction based on mechanistic understanding and experimental verification based on thin film model catalysts to facilitate the development of more practical powder IrO x /TiN catalysts with high activity and stability for acidic OER.

08 HYDROGEN↗

Multi-walled carbon nanotubes injure the plasma membrane of macrophages

Carbon nanotubes (CNTs) are emerging nanotechnology materials which are likely to be mass-produced in the near future. However, prior to mass-production, certain health-related concerns should first be addressed. For example, when inhaled, the thin-fibrous shape and the biopersistent characteristics of CNTs may cause pulmonary diseases, in a manner similar to asbestos. In the present study, mouse macrophages (J774.1) were exposed to highly-purified multi-walled CNTs (MWCNTs, 67 nm) or to UICC crocidolite in order to evaluate the toxicity of these nano-size fibers. The cytotoxicity of MWCNTs was found to be higher than that of crocidolite. The toxic effect of MWCNTs was not affected by N-acetylcysteine, an antioxidant, or buthionine sulfoximine, a glutathione synthesis inhibitor. cDNA microarray analyses suggested that the cytotoxicity of MWCNTs could not be explained satisfactorily by either an increase or decrease of gene expression, although mRNA levels of some cytokines were slightly increased by MWCNTs. Moreover, MWCNTs did not significantly activate either MAP kinases such as ERK, JNK and p38, nor common apoptosis pathways such as caspase 3 and PARP. Electron microscopic studies indicated that MWCNTs associate with the plasma membrane of macrophages and disrupt the integrity of the membrane. Several proteins were found to adsorb onto MWCNTs when MWCNT-exposed macrophages were gently lysed. One of these proteins was macrophage receptor with collagenous structure (MARCO). MARCO-transfected CHO-K1 cells associated with MWCNTs more rapidly than mock-transfected cells. These results indicate that MWCNTs probably trigger cytotoxic effects in phagocytotic cells by reacting with MARCO on the plasma membrane and rupturing the plasma membrane.

60 APPLIED LIFE SCIENCES↗

Anomalous elasticity, fluctuations and disorder in elastic membranes

Motivated by freely suspended graphene and polymerized membranes in soft and biological matter we present a detailed study of a tensionless elastic sheet in the presence of thermal fluctuations and quenched disorder. The manuscript is based on an extensive draft dating back to 1993, that was circulated privately. It presents the general theoretical framework and calculational details of numerous results, partial forms of which have been published in brief Letters (Le Doussal and Radzihovsky, 1992; 1993). The experimental realization atom-thin graphene sheets (Novoselov et al., 2004) have driven a resurgence in this fascinating subject, making our dated predictions and their detailed derivations timely. To this end we analyze the statistical mechanics of a generalized D-dimensional elastic “membrane” embedded in d dimensions using a self-consistent screening approximation (SCSA), that has proved to be unprecedentedly accurate in this system, exact in three complementary limits: (i) d→∞, (ii) D→4, and (iii) D=d. Focusing on the critical “flat” phase, for a homogeneous two-dimensional (D=2) membrane embedded in three dimensions (d=3), we predict its universal roughness exponent ζ=0.590, length-scale dependent elastic moduli exponents η=0.821 and η{sub u}=0.358, and an anomalous Poisson ratio, σ = - 1/3. In the presence of random uncorrelated heterogeneity the membrane exhibits a glassy wrinkled ground state, characterized by ζ'=0.775,η' = 0.449,η{sub u}'=1.101 and a Poisson ratio σ ' = - 1/3. Motivated by a number of physical realizations (charged impurities, disclinations and dislocations) we also study power-law correlated quenched disorder that leads to a variety of distinct glassy wrinkled phases. Finally, neglecting self-avoiding interaction we demonstrate that at high temperature a “phantom” sheet undergoes a continuous crumpling transition, characterized by a radius of gyration exponent, ν=0.732 and η=0.535. Many of these universal predictions have received considerable support from simulations. We hope that this detailed presentation of the SCSA theory will be useful to further theoretical developments and corresponding experimental investigations on freely suspended graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Absolute vs Convective Instabilities and Front Propagation in Lipid Membrane Tubes

Here we analyze the stability of biological membrane tubes, with and without a base flow of lipids. Membrane dynamics are completely specified by two dimensionless numbers: the well-known Föppl-von Kármán number Γ and the recently introduced Scriven-Love number SL, respectively quantifying the base tension and base flow speed. For unstable tubes, the growth rate of a local perturbation depends only on Γ, whereas SL governs the absolute versus convective nature of the instability. Furthermore, nonlinear simulations of unstable tubes reveal an initially localized disturbance result in propagating fronts, which leave a thin atrophied tube in their wake. Depending on the value of Γ, the thin tube is connected to the unperturbed regions via oscillatory or monotonic shape transitions-reminiscent of recent experimental observations on the retraction and atrophy of axons. We elucidate our findings through a weakly nonlinear analysis, which shows membrane dynamics may be approximated by a model of the class of extended Fisher-Kolmogorov equations. Our study sheds light on the pattern selection mechanism in axonal shapes by recognizing the existence of two Lifshitz points, at which the front dynamics undergo steady-to-oscillatory bifurcations.

59 BASIC BIOLOGICAL SCIENCES↗

Design of a shear-thinning recoverable peptide hydrogel from native sequences and application for influenza H1N1 vaccine adjuvant

Peptide hydrogels are considered injectable materials for drug delivery and tissue engineering applications. Most published hydrogel-forming sequences contain either alternating-charged and noncharged residues or amphiphilic blocks. Here, we report a self-assembling peptide, h9e (FLIVIGSIIGPGGDGPGGD), designed by rationally combining two native sequences from an elastic segment of spider silk and a trans-membrane segment of human muscle L-type calcium channel. The turning segment GSII of h9e promoted hydrogel formation in both Ca2+ solution and acidic pH conditions at water content greater than 99.5%. Although h9e Ca2+ hydrogel and h9e acidic hydrogel have the same sequence, they have distinct physical properties. The shear-thinning, rapid-strengthrecovering h9e Ca2+ hydrogel was used as an H1N1 influenza vaccine adjuvant. The h9e adjuvant was biologically safe and improved immune response by 70% compared with an oil-based commercial adjuvant.

59 BASIC BIOLOGICAL SCIENCES↗

Solvent Processing and Ionic Liquid-Enabled Long-Range Vertical Ordering in Block Copolymer Films with Enhanced Film Stability

Rapid and reliable processing methods for forming ordered block copolymer (BCP) materials with low defect density in a thin film geometry are required for many nanotechnology applications. Vertically aligned BCP structures, in particular, have applications ranging from nanolithography for electronics and photonics to nanoporous membranes for water remediation and novel batteries for flexible electronics. However, the attainment of nearly complete vertical orientational order of the BCP ordered phase remains challenging. Solvent-based techniques, such as direct immersion annealing (DIA) and solvent vapor annealing (SVA), have immense potential for these applications of BCP films, as it allows for tuning of their thermodynamic, structural, and chain mobility driven kinetic properties. We first demonstrate that DIA, using a judicious choice of binary solvent mixtures along with a relatively hydrophobic ionic liquid (IL), induces the rapid vertical ordering in polystyrene-b-polymethylmethacrylate (PS-PMMA) block copolymer in lamellar films. The IL establishes synergy to the binary solvent mixture of toluene and heptane to 1 create a near-neutral solvent environment for attaining the vertical microstructure of the BCP. Next, we show that IL can suppress the de-wetting of the PS-PMMA films to achieve long-range order using SVA in cylindrical films for long annealing times. Both vertical and horizontal morphology is attained in these films by selecting different solvent environments. Furthermore, attaining enhanced vertical and horizontal BCP structure with long-range defect-free order by tuning solvent quality and using additives like IL can render them useful for many nanotech applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced light emission in photonic crystal nanocavities with Erbium-doped silicon nanocrystals

Photonic crystal nanocavities are fabricated in silicon membranes covered by thermally annealed silicon-rich nitride films with Erbium-doped silicon nanocrystals. Silicon nitride films were deposited by sputtering on top of silicon on insulator wafers. The nanocavities were carefully designed in order to enhance emission from the nanocrystal sensitized Erbium at the 1540 nm wavelength. Experimentally measured quality factors of {approx}6000 were found to be consistent theoretical predictions. The Purcell factor of 1.4 was estimated from the observed 20-fold enhancement of Erbium luminescence.

36 MATERIALS SCIENCE↗

Oxide-cladding aluminum nitride photonic crystal slab: Design and investigation of material dispersion and fabrication induced disorder

Photonic crystal slabs with a lower-index material surrounding the core layer are an attractive choice to circumvent the drawbacks in the fabrication of membranes suspended in air. In this work we propose a photonic crystal (PhC) slab structure composed of a triangular pattern of air holes in a multilayer thin film of aluminum nitride embedded in silicon dioxide layers designed for operating around 450 nm wavelengths. We show the design of an ideal structure and analyze the effects of material dispersion based on a first-order correction perturbation theory approach using dielectric functions obtained by experimental measurements of the thin film materials. Numerical methods were used to investigate the effects of fabrication induced disorder of typical nanofabrication processes on the bandgap size and spectral response of the proposed device. Deviation in holes radii and positions were introduced in the proposed PhC slab model with a Gaussian distribution profile. Impacts of slope in holes sidewalls that might result from the dry etching of AlN were also evaluated. The results show that for operation at the midgap frequency, slope in holes sidewalls is more critical than displacements in holes sizes and positions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anode-Design Strategies for Improved Performance of Polymer-Electrolyte Fuel Cells with Ultra-Thin Electrodes

Here, we report results of systematic, holistic, diagnostic, and cell studies to elucidate the mechanistic role of the experimentally determined influence of the anode gas-diffusion layer (GDL) on the performance of ultra-thin electrode polymer-electrolyte fuel cells, which can further enable fuel-cell market penetration. Measurements of product water balance and in situ neutron imaging of operational membrane-electrode-assembly water profiles demonstrate how improved performance is due to a novel anode GDL fiber-density modulated structure at the micrometer scale that removes water preferentially out of the anode, a key strategy to manage water in these cells. The banded structure results in low transport-resistance pathways, which affect water-droplet removal from the GDL surface. This interfacial effect is unexpectedly shown to be critical for decreasing overall water holdup throughout the cell. Finally, these studies demonstrate a new material paradigm for understanding and controlling fuel-cell water management and related high-power technologies or electrodes where multiphase flow occurs.

25 ENERGY STORAGE↗

Long-term stability of nanostructured thin film electrodes at operating potentials

Long-term stability of nanostructured thin film (NSTF) catalysts at operating potentials has been investigated. Compared to high surface area Pt/C catalysts, NSTF electrodes show 20–50x smaller F – emission rates (FER) because of their high specific activity for oxygen reduction reaction (ORR), but are susceptible to poisoning by the products of membrane degradation because of their low electrochemically active surface area (ECSA). The observed voltage degradation rates at potentials corresponding to 1–1.5 A/cm 2 current density are much higher than the allowable 13–14 μV/h. Although F – is not itself responsible for performance decay, cumulative fluoride release (CFR) is a good marker for catalyst surface contamination. The observed performance decay is not only due to loss of active Pt sites but also adsorbed impurities impeding ORR kinetics. There is a strong correlation between measured CFR and observed decrease in specific ORR activity and limiting current density and increase in mass transfer overpotentials. Furthermore, the correlations indicate that the target of <10% lifetime performance degradation can be achieved by restricting CFR in NSTF electrodes to 0.7 μg/cm 2 , as may be possible with more stable membranes, higher surface area NSTF catalysts, and cell operation at lower temperatures and higher relative humidities.

36 MATERIALS SCIENCE↗

Networks of ultrasmall Pd/Cr bilayer nanowires as high performance hydrogen sensors.

The newly developed hydrogen sensor, based on a network of ultrasmall pure palladium nanowires sputter-deposited on a filtration membrane, takes advantage of single palladium nanowires' characteristics of high speed and sensitivity while eliminating their nanofabrication obstacles. However, this new type of sensor, like the single palladium nanowires, cannot distinguish hydrogen concentrations above 3%, thus limiting the potential applications of the sensor. This study reports hydrogen sensors based on a network of ultrasmall Cr-buffered Pd (Pd/Cr) nanowires on a filtration membrane. These sensors not only are able to outperform their pure Pd counterparts in speed and durability but also allow hydrogen detection at concentrations up to 100%. The new networks consist of a thin layer of palladium deposited on top of a Cr adhesion layer 1-3 nm thick. Although the Cr layer is insensitive to hydrogen, it enables the formation of a network of continuous Pd/Cr nanowires with thicknesses of the Pd layer as thin as 2 nm. The improved performance of the Pd/Cr sensors can be attributed to the increased surface area to volume ratio and to the confinement-induced suppression of the phase transition from Pd/H solid solution ({alpha}-phase) to Pd hydride ({beta}-phase).

36 MATERIALS SCIENCE↗

6FDA-DETDA: DABE polyimide-derived carbon molecular sieve hollow fiber membranes: Circumventing unusual aging phenomena

Transport properties are discussed for asymmetric carbon molecular sieve (CMS) hollow fiber membranes based on polyimide precursors derived from a butanol esterified diamino benzoic acid (DABA) based polyimide, 6FDA-DETDA:DABE. Precursor fiber pretreatment with 10% Ethenyl(trimethoxy)silane [vinyltrimethoxysilane (VTMS)] solution in hexane followed by pyrolysis at 550 °C in ultra-high purity argon created asymmetric CMS fibers with CO 2 permeance above 1000 GPU and CO 2 /CH 4 selectivities > 25. Storage of the as-made modules for 72 days in 7 bar CO 2 suppressed undesirable aging typically seen under vacuum or atmospheric pressure air and provided CO 2 permeance and CO 2 /CH 4 selectivity of 780 GPU and 48 respectively. These results are in contrast to significant losses in CO 2 permeance and CO 2 /CH 4 selectivity for CMS created under equivalent pyrolysis conditions from non-esterified 6FDA-DETDA: DABA variant, even under CO 2 storage. The 6FDA-DETDA: DABA-derived CMS results were surprising, since dense film CMS samples from the same precursors did not show the undesirable permeance and selectivity changes. Moreover, other non-DABA containing precursors in dense film and asymmetric fiber forms can be effectively stabilized under CO 2 storage. Such findings suggest that high residual stress in the freshly formed thin selective layers of asymmetric structures in DABA-derived CMS causes undesirable micro-scale rearrangements. In dense films and even asymmetric skins of non-DABA derived CMS membranes, evidence of such undesirable rearrangements are not apparent. DABA-derived cross-links are presumably the cause of these effects. Mono-esterification of 6FDA-DETDA: DABA to form 6FDA-DETDA: DABE controls such crosslinking-derived stresses and resultant instabilities in the CMS fibers, thereby providing stable high performance gas separation properties under CO 2 storage or use in mixed gas feeds.

03 NATURAL GAS↗

Cytoplasmic membrane changes during adaptation of the fresh water cyanobacterium Synechococcus 6311 to salinity

In this investigation, changes were characterized in cell structure and cytoplasmic membrane organization that occur when the freshwater cyanobacterium Synechococcus 6311 is transferred from 'low salt' (0.03 molar NaCl) to 'high salt' (0.5 molar NaCl) media (i.e. sea water concentration). Cells were examined at several time points after the imposition of the salt stress and compared to control cells, in thin sections and freeze fracture electron microscopy, and by flow cytometry. One minute after exposure to high salt, i.e. 'salt shock', virtually all intracellular granules disappeared, the density of the cytoplasm decreased, and the appearance of DNA material was changed. Glycogen and other granules, however, reappeared by 4 hours after salt exposure. The organization of the cytoplasmic membrane undergoes major reorganization following salt shock. Freeze-fracture electron microscopy showed that small intramembrane particles (diameter 7.5 and 8.5 nanometers) are reduced in number by two- to fivefold, whereas large particles, (diameters 14.5 and 17.5 nanometers) increase two- to fourfold in frequency, compared to control cells grown in low salt medium. The changes in particle size distribution suggest synthesis of new membrane proteins, in agreement with the known increases in respiration, cytochrome oxidase, and sodium proton exchange activity of the cytoplasmic membrane.

NASA Discipline Number 61-10↗

Possible mechanism of adhesion in a mica supported phospholipid bilayer

Phospholipid bilayers supported on hydrophilic solids like silica and mica play a substantial role in fundamental studies and technological applications of phospholipid membranes. In both cases the molecular mechanism of adhesion between the bilayer and the support is of primary interest. Since the possibilities of experimental methods in this specific area are rather limited, the methods of computer simulation acquire great importance. In this paper we use the grand canonical Monte Carlo technique and an atomistic force field to simulate the behavior of a mica supported phospholipid bilayer in pure water as a function of the distance between the bilayer and the support. The simulation reveals a possible adhesion mechanism, where the adhesion is due to individual lipid molecules that protrude from the bilayer and form widely spaced links with the support. Simultaneously, the bilayer remains separated from the bilayer by a thin water interlayer which maintains the bilayer fluidity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear Analysis of Bonded Composite Tubular Lap Joints

The present study describes a semi-analytical solution method for predicting the geometrically nonlinear response of a bonded composite tubular single-lap joint subjected to general loading conditions. The transverse shear and normal stresses in the adhesive as well as membrane stress resultants and bending moments in the adherends are determined using this method. The method utilizes the principle of virtual work in conjunction with nonlinear thin-shell theory to model the adherends and a cylindrical shear lag model to represent the kinematics of the thin adhesive layer between the adherends. The kinematic boundary conditions are imposed by employing the Lagrange multiplier method. In the solution procedure, the displacement components for the tubular joint are approximated in terms of non-periodic and periodic B-Spline functions in the longitudinal and circumferential directions, respectively. The approach presented herein represents a rapid-solution alternative to the finite element method. The solution method was validated by comparison against a previously considered tubular single-lap joint. The steep variation of both peeling and shearing stresses near the adhesive edges was successfully captured. The applicability of the present method was also demonstrated by considering tubular bonded lap-joints subjected to pure bending and torsion.

E. Oterkus↗

Investigation of thin/well-tunable liquid/gas diffusion layers exhibiting superior multifunctional performance in low-temperature electrolytic water splitting

Liquid/gas diffusion layers (LGDLs), which are located between the catalyst layer (CL) and bipolar plate (BP), play an important role in enhancing the performance of water splitting in proton exchange membrane electrolyzer cells (PEMECs). They are expected to transport electrons, heat, and reactants/products simultaneously with minimum voltage, current, thermal, interfacial, and fluidic losses. Here in this study, the thin titanium-based LGDLs with straight-through pores and well-defined pore morphologies are comprehensively investigated for the first time. The novel LGDL with a 400 μm pore size and 0.7 porosity achieved a best-ever performance of 1.66 V at 2 A cm -2 and 80 °C, as compared to the published literature. The thin/well-tunable titanium based LGDLs remarkably reduce ohmic and activation losses, and it was found that porosity has a more significant impact on performance than pore size. In addition, an appropriate equivalent electrical circuit model has been established to quantify the effects of pore morphologies. The rapid electrochemical reaction phenomena at the center of the PEMEC are observed by coupling with high-speed and micro-scale visualization systems. Lastly, the observed reactions contribute reasonable and pioneering data that elucidate the effects of porosity and pore size on the PEMEC performance. This study can be a new guide for future research and development towards high-efficiency and low-cost hydrogen energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance of Surface IrO x in Stabilizing RuO 2 for Oxygen Evolution

The high precious metal loading and high overpotential of the oxygen evolution reaction (OER) prevents the widespread utilization of polymer electrolyte membrane (PEM) water electrolyzers. In this paper, we explore the OER activity and stability in acidic electrolyte of a combined IrO x /RuO 2 system consisting of RuO 2 thin films with submonolayer (1, 2, and 4 Å) amounts of IrO x deposited on top. Operando extended X-ray absorption fine structure (EXAFS) on the Ir L-3 edge revealed a rutile type IrO 2 structure with some Ir sites occupied by Ru, IrO x being at the surface of the RuO 2 thin film. We monitor corrosion on IrO x /RuO 2 thin films by combining electrochemical quartz crystal microbalance (EQCM) with inductively coupled mass spectrometry (ICP-MS). We elucidate the importance of submonolayer surface IrO x in minimizing Ru dissolution. Finally, our work shows that we can tune the surface properties of active OER catalysts, such as RuO 2 , aiming to achieve higher electrocatalytic stability in PEM electrolyzers.

36 MATERIALS SCIENCE↗