Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature extremes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Transient Heater Analysis for Orion Thermal Vacuum Testing

The Space Environments Complex (SEC) at NASA's Plum Brook Station is currently being prepared to perform thermal vacuum testing of the Orion spacecraft. This thermal vacuum, or T-VAC test will be run for a period of 60 days, which will be the longest such test ever conducted at SEC. The Orion Crew Module (CM) and Service Module (SM) will undergo T-VAC testing in SEC's Space Simulation Vacuum Chamber to ensure the functionality of these systems in a high vacuum environment at extremely cold temperatures. The T-VAC test setup in SEC was modeled and simulated in Thermal Desktop. The initial results from thermal analysis showed areas on the chamber floor to reach very low temperatures, which were below the minimum operating range of certain hardware located on or near the chamber floor. These hardware including elastomeric seals on the GN2 piping, bearing pads and O-rings are essential to both test and the operation of the SEC facility, and must be kept well above -20°F throughout the duration of the T-VAC test. Thus, further analysis was conducted to include the placement of patch heaters on the chamber floor in an effort to increase the temperature near colder areas on the floor. The results and findings from this analysis showed that using these heaters will result in a favorable temperature distribution on the chamber floor. This paper will discuss the methods used in the analysis, and the results obtained to determine the optimal configuration of these heaters on the chamber floor.

Wilhite, Jarred↗
NASA NTRS2018

Transient Heater Analysis for Orion Thermal Vacuum Testing

The Space Environments Complex (SEC) at NASA’s Plum Brook Station is currently being prepared to perform thermal vacuum testing of the Orion spacecraft. This thermal vacuum, or T-VAC test will be run for a period of 60 days, which will be the longest such test ever conducted at SEC. The Orion Crew Module (CM) and Service Module (SM) will undergo T-VAC testing in SEC’s Space Simulation Vacuum Chamber to ensure the functionality of these systems in a high vacuum environment at extremely cold temperatures. The T-VAC test setup in SEC was modeled and simulated in Thermal Desktop. The initial results from thermal analysis showed areas on the chamber floor to reach very low temperatures, which were below the minimum operating range of certain hardware located on or near the chamber floor. These hardware including elastomeric seals on the GN2 piping, bearing pads and O-rings are essential to both test and the operation of the SEC facility, and must be kept well above -20°F throughout the duration of the T-VAC test. Thus, further analysis was conducted to include the placement of patch heaters on the chamber floor in an effort to increase the temperature near colder areas on the floor. The results and findings from this analysis showed that using these heaters will result in a favorable temperature distribution on the chamber floor. This paper will discuss the methods used in the analysis, and the results obtained to determine the optimal configuration of these heaters on the chamber floor.

Wilhite, Jarred↗
NASA NTRS2016

Annular Air Leaks in a Liquid Hydrogen Storage Tank

Large liquid hydrogen (LH2) storage tanks are vital infrastructure for NASA, the DOD, and industrial users. Over time, air may leak into the evacuated, perlite filled annular region of these tanks. Once inside, the extremely low temperatures will cause most of the air to freeze. If a significant mass of air is allowed to accumulate, severe damage can result from nominal draining operations. Collection of liquid air on the outer shell may chill it below its ductility range, resulting in fracture. Testing and analysis to quantify the thermal conductivity of perlite that has nitrogen frozen into its interstitial spaces and to determine the void fraction of frozen nitrogen within a perlite-frozen nitrogen mixture is presented. General equations to evaluate methods for removing frozen air, while avoiding fracture, are developed. A hypothetical leak is imposed on an existing tank and a full analysis of that leak is detailed. This analysis includes a thermal model of the tank and a time-to-failure calculation. Approaches to safely remove the frozen air are analyzed, leading to the conclusion that the optimal approach is to allow the frozen air to melt and use a water stream to prevent the outer shell from chilling.

Krenn, A. G.↗
NASA NTRS2017

Where Is the Upper Altitude Boundary of Earth's Biosphere? An Upcoming Stratosphere Exploration Mission

Earths atmosphere provides a relatively thin barrier to the severe conditions of space. Terrestrial microorganisms from our planets surface gets swept up into the atmosphere at rates which are influenced by meteorology, season, and variety of other regionally-dependent conditions. Residence time of microbes in the atmosphere, dispersal patterns, and metabolic activity in clouds are topics of special interest in tropospheric aerobiology. But what about even higher altitudes? A century of ocean exploration has allowed the scientific community to characterize marine life at every depth. Such knowledge was enabled by routine access, specifically, submersible vehicles with sample return systems. The outer reaches of Earth's atmosphere probably contain trace signatures of microbial life swept up from the surface, but high-altitude exploration (from 18-50 km above sea level) has been severely constrained by a shortage of reliable affordable sample acquisition systems. Thus, attempts to establish the upper altitude limits of Earths biosphere boundary remain unresolved. Previous conclusions based on observations of microbial growth and DNA signatures from samples collected in the upper atmosphere have resulted in extraordinary claims for the tenacity of life in the stratosphere. This altitude range can be regarded as a natural laboratory for examining the edge of habitability, a topic of central important to the field of astrobiology; in fact, stratosphere conditions (high UV light and low extremes of temperature, pressure, and relative humidity) closely resemble stressors associated with the surface of Mars. Moreover, low biomass detection instruments developed exploring Earths upper atmosphere can contribute to future strategies for life detection with spacecraft exploring other worlds. While pioneering, many past stratospheric microbiology studies have been qualitative in nature and lacking rigorous contamination control measurements to verify system sterility. We have designed, constructed, and recently flown a novel system for collecting upper atmosphere bioaerosols using the NASA C20A aircraft. We will report preliminary mission results from the lower stratosphere (characterizing abundance, diversity and survivability or airborne microorganisms), describe our methods for reducing false positives, and outline the open scientific engineering challenges in an ongoing effort to better establish Earths high-altitude biosphere boundary.

Smith, David J.↗
NASA NTRS2020

The Abiotic Production in Space of Molecules of Astrobiological Interest

The chemistry that occurs in space is considerably different from what we are used to in a planetary setting. The extremely low densities, high radiation fields, and extremes in temperature (both high and low), and the fact that hydrogen and helium represent all but a few percent of the available reactants, would normally be thought to be counter-productive for the production of complex molecular species. Surprisingly, chemistry reactions occur in many environments in space, although few of these involve simple aqueous or gas phase reactions of the type we are familiar with on Earth. Instead they involve ion-molecule and radical-molecule reactions, gas-grain reactions, and reactions mediated by ionizing radiation. This talk will focus on the chemistry that can occur when extraterrestrial mixed-molecular ices are exposed to radiation and will concentrate on the production of molecules that are of particular interest for astrobiologists.

Sandford, Scott↗
NASA NTRSDate not supplied

Micro-grid for Future Planetary Surface Needs

Under the current Artemis Program, the National Aeronautics and Space Administration (NASA) will send its next set of astronauts (first woman and next man) to the Moon by 2024 and establish a sustainable presence on the lunar surface by 2028. The challenge of creating a sustained lunar surface presence is significantly different than previous efforts. Lunar surface operations will require access to continuous and highly reliable power to support mission needs, such as to support ISRU operations. Adding to this challenge, the lunar surface operations are not going to be established over a single effort, rather the system and operations will evolve and grow over time (years). The first initial loads that arrive on the lunar surface will be integrated to their own dedicated power sources. As the lunar surface operations grow, so will the demand for power and at some point these individual loads will require more power than can be generated with any single power device. This power demand drives the need for inter-connecting the loads and power devices to share power between them, resulting in a micro-grid. One of the advantages of developing a lunar surface micro-grid is that allows lunar surface operations to resemble electrical utility operations on Earth; it allows power to be generated where it is convenient and allows power to be consumed where it is convenient, rather than negotiating between generation and consumption. The micro-grid concept also provides another benefit of affording the ability to increase overall system reliability by integrating dissimilar power generation and energy storage devices together, for example modifying the power generation strategy to include both solar arrays and nuclear. Creating a lunar surface micro-grid has its advantages, however there are significant challenges associated with an evolvable micro-grid concept. The challenges include how to efficiently transmit large amounts of power (10kW+) long distances (1kW+), how to effectively integrate dissimilar power generation and energy storage devices to maximize power consumption and minimize downtime, and how to physically connect these devices together with a connector that can survive the lunar environment (dust, extreme cold temperatures) and is capable of both astronaut and robotic operation. The basic components of the micro-grid have to be designed to ensure the system is sustainable, modular, and reconfigurable. An interface to the micro-grid has to be designed that allows for additional technologies, some of which may not yet be fully designed, to easily integrate into the micro-grid concept. This presentation discusses these lunar challenges in some more depth and offers a path forward in designing an evolvable micro-grid to meet the needs of the lunar surface operations and proposes a Universal Micro-grid Interface Converter to connect these dissimilar power sources and mission loads to the micro-grid.

Jeffrey Csank↗
NASA NTRS2020

Implementation Concept of Operation for a Multi-Purpose Cassegrain Solar Concentrator, Micro-Spectrometers, and Electrostatic Neutralizers to Enable In Situ Construction Activities plus Lunar, Planetary, and Deep Space Science Exploration on the Moon

The ability to utilize regolith would support human missions to the Moon and Mars by both stabilizing the surface as well as the use of indigenous resources. Precision landing requirements include surface stabilization to prevent damage or contamination due to regolith projectiles as a result of plume interaction with regolith. The use of indigenous resources rather than hauling materials from Earth appears to be economically a palatable option by converting indigenous resources to usable products. However, such activities have new technical challenges to overcome the issues related to lunar environmental conditions, a wide range of temperature fluctuation, extremely high vacuum, and electrostatically charged fine regolith dusts. For both the regolith sintering and extraction of resources onsite, a Cassegrain solar concentrator was studied for not only sintering lunar regolith into a hardened stabilized surface, but also other multiple applications. This report illustrates a Cassegrain solar concentrator that has multi-functional capabilities for space missions. Proper design and implementation of high-performance lightweight composite materials for the primary mirror of the Cassegrain concentrator can offer multiple capabilities to be performed on the Moon. The multiple applications studied with Cassegrain concentrators are (1) Solar sintering for landing pad and habitats, (2) Harvest of volatiles: H2O, O2, H2, and He-3, (3) Space antenna for telemetry and telecommunication, and (4) Space telescope with 20-meter aperture that exceeds the space telescopes to date in terms of the State-of-Art (SOA) in resolution and aperture diameter. In this study, a key emphasis was placed on the NASA Langley-developed boron nitride nanotube (BNNT) nanocomposite technology which is ideal for the segmented primary mirror structure of the Cassegrain system because it promises a very low coefficient of thermal expansion (CTE) and negligible Poisson ratio. Also, BNNT nanocomposites offer several noticeable benefits, such as light weight, radiation shielding capability, and mechanical strength for structural applications. Additionally, the NASA Langley-developed bullet-like micro-spectrometer and electrostatic power generator were reviewed for mineral mapping applications and electrostatic power generation and dust mitigation from electrostatically charged regolith.

landing pad↗
NASA NTRS2020

The Spectral Radiance of Indirectly Illuminated Surfaces in Regions of Permanent Shadow on the Moon

Regions of permanent shadow at the lunar poles have been suggested to host water ice and potentially other volatile compounds owing to their extremely low temperatures. Imaging in permanent shadow using indirect lighting from nearby topographic highs illuminated by the Sun has demonstrated the feasibility of optical remote sensing of permanent shadow surfaces, and a near-IR detection of water ice spectral features demonstrates the ability to collect usable spectroscopic data. The infrared emission of the lunar surface is largely in radiative equilibrium, so the temperature of surfaces in permanent shadow is driven by the intensity of the indirect illumination. This means that surfaces at very low temperatures, of high interest owing to their ability to trap and retain volatile compounds, will be the most challenging to measure. We provide estimates of indirect spectral radiance as a function of permanent shadow temperature from 400 nm to 14 μm using empirical data on permanent shadow temperature and broadband visible and near IR radiance, coupled with known reflectance properties of lunar materials. The relationships show there is ample radiance and photon radiance for reflectance imaging and spectroscopy from 400 nm to 8 μm at temperatures of regions of permanent shadow above 60K with appropriately designed instruments. Beyond 8 μm lunar spectral properties reduce the available radiance substantially, making reflectance observations challenging.

P. G. Lucey↗
NASA NTRS2018

Radiometric Stability in 16 years of AIRS Hyperspectral Infrared Data (SPIE OP-431-20)

With global warming at the rate of 10 mK/yr, it is important to at least characterize any trend in the AIRS data, which may impact the use of AIRS data for climate change research. We evaluated the stability of the AIRS v5 calibration for seven atmospheric window channels between 2002 and 2018 under tropical ocean clear conditions. Trends for the channels between 961, 1128 and 1231 cm-1 channels are typically +3 mK/yr; for 790 and 901 cm-1 the trend is 6 mK/yr, i.e. the observations are increasingly getting warmer than expected. The trends are day/night consistent. The trend for the 2508 and 2616 cm-1 channels is close to 10 mK/yr at night, but closer to 6 mK/yr during the day. On an absolute scale these trends are small, but not when viewed in the context of global warming at a 10 mK/yr rate. While the warming trends are consistent with increased scattering from the scan mirrors, which create an error in reading the Onboard Blackbody Calibration, the resulting changes in the gain are a factor of about five larger than observed changes in the gain. The effects of scattering due to scan mirror contamination are evident at extremely cold temperatures, but scattering does not produce the observed warming at warm temperatures. It is possible that much of the observed warming in the AIRS window channels is a geophysical effect related to the warming of the oceans, resulting in a shift in the diurnal cycle and skin effect correction. This requires more careful evaluation.

Manning, Evan M.↗
NASA NTRS2018

Radiometric Stability in 16 years of AIRS Hyperspectral Infrared Data (SPIE OP-431-20)

With global warming at the rate of 10 mK/yr, it is important to at least characterize any trend in the AIRS data, which may impact the use of AIRS data for climate change research. We evaluated the stability of the AIRS v5 calibration for seven atmospheric window channels between 2002 and 2018 under tropical ocean clear conditions. Trends for the channels between 961, 1128 and 1231 cm-1 channels are typically +3 mK/yr; for 790 and 901 cm-1 the trend is 6 mK/yr, i.e. the observations are increasingly getting warmer than expected. The trends are day/night consistent. The trend for the 2508 and 2616 cm-1 channels is close to 10 mK/yr at night, but closer to 6 mK/yr during the day. On an absolute scale these trends are small, but not when viewed in the context of global warming at a 10 mK/yr rate. While the warming trends are consistent with increased scattering from the scan mirrors, which create an error in reading the Onboard Blackbody Calibration, the resulting changes in the gain are a factor of about five larger than observed changes in the gain. The effects of scattering due to scan mirror contamination are evident at extremely cold temperatures, but scattering does not produce the observed warming at warm temperatures. It is possible that much of the observed warming in the AIRS window channels is a geophysical effect related to the warming of the oceans, resulting in a shift in the diurnal cycle and skin effect correction. This requires more careful evaluation.

Manning, Evan M.↗
NASA NTRS2017

Thermal cycling testing to failure of a ceramic column grid array package for space applications

Ceramic column grid array (CCGA) packages have been used increasingly in logic and microprocessor functions, telecommunications, flight avionics boards, payload electronics boards, engineering navigational and science cameras, electronic assemblies, and other applications, because of their inherent advantages such as high electrical interconnect density, very good thermal and electrical performance, and compatibility with standard surface-mount technology (SMT) packaging assembly processes. Because these advanced electronic packages tend to have less solder-joint strain-relief than do leaded flat-pack electronic packages, the reliability of CCGA packages in challenging thermal environments is a very important consideration for their short- and long-term use in JPL-NASA space missions. In this study, we assembled daisy chains of polyimide printed wiring boards from CCGA-interconnect packages, inspected the boards nondestructively, and then subjected them to thermal cycling to assess their reliability in thermal environments from +125°C to -40°C±25°C. The test hardware consists of a CCGA 1752 package (CN version). The package was divided into four daisy-chained sections that were electrically monitored for their continuity during thermal cycling. The CCGA 1752 package is roughly 45 mm × 45 mm with a 42-mm × 42-mm array of 80%/20% Pb/Sn columns on a 1.00-mm pitch. The resistance of the daisy-chained CCGA interconnects was continuously monitored during thermal cycling in a gaseous nitrogen environment. Electrical continuity resistance measurements as a function of thermal cycling are reported here; tests to date have shown significant change to an open circuit in daisy-chain resistance as a function of thermal cycling. The change in interconnect resistance becomes increasingly noticeable with increasing number of thermal cycles. This paper describes the experimental thermal-cycling test results of CCGA 1752 package reliability testing under an extremely wide temperature range. The first failure was observed at 1479th thermal cycle. We report the thermal-cycle reliability test data for ~2500 thermal cycles.

Ramesham, Rajeshuni↗
NASA NTRS2019

Europa lander mission concept power architecture

The Europa Lander mission concept team seeks to optimize a power system architecture to search for evidence of life on the surface of Europa, an icy moon of Jupiter. Environmental and mission challenges included radiation, extreme low temperatures, planetary protection, mission duration, and the limitations of the launch vehicle. Leveraging heritage from NASA’s Europa Clipper mission, the baseline architecture is highly reliable, capable of meeting all science objectives, and comprises of three vehicles: a solar powered carrier stage, a secondary battery powered descent vehicle, and a primary battery powered lander.

Carr, Gregory↗
NASA NTRS2021

Astromaterial Curation and Research at NASA

Astromaterial sample return missions from other planetary bodies (e.g., the Moon, asteroids, the Sun) and astromaterial sample collection missions here on Earth (e.g., Antarctic Meteorites, Cosmic Dust) have been a vital part of NASA’s science vision since nearly its inception. Beginning with the Apollo missions to the Moon and extending to the recent successful sample collection by the OSIRIS-REx asteroid sample return mission, these astromaterials collections have been an invaluable resource to scientists and educators around the world. Sample studies continue to provide fundamental insight into how our solar system and its constituent bodies formed and evolved over the past 4.5 billion years. As evidence of their broad impact, there are over 19,141 samples on loan to 433 Principal Investigators in 24 countries [1]. As we plan for exploration missions through 2050, sample return missions will continue to play a vital role in NASA’s science vision. Returned samples truly are the gift that keeps on giving. Having the samples accessible on Earth allows new generations of scientists and new generations of instrumentation to pursue ever evolving scientific questions. For example, the Apollo samples were collected ~50 years ago, yet our views of how the Earth-Moon system formed, the role of volatiles in the early inner solar system, and even the positions of the gas giants in the outer solar system have changed dramatically as a result of Apollo sample analyses conducted very recently. Vital to the long-term viability of any sample return mission is the careful curation of the samples. Curatorial efforts need to begin early in the project lifecycle, not with the return of the samples, but at mission conception. The Astromaterials Acquisition and Curation Office at NASA Johnson Space Center is responsible for curating all of NASA’s current and future extraterrestrial samples. Looking at possible sample return missions over the next 35+ years [2], many samples would require curation efforts a step beyond current capabilities, e.g., cold or cryogenic curation, organically and biologically clean curation, curation of gases and ices, and curation of samples with extreme pressure, temperature, or redox requirements. During the lecture, we discuss the current curatorial efforts in JSC curation, as well as discoveries from the astromaterial research. [1] Zeigler, R. A. et al. (2017) Planetary Science Vision 2050 Workshop. [2] McCubbin F. M. et al. (2017) Planetary Science Vision 2050 Workshop.

astromaterial↗
NASA NTRSDate not supplied

RadBREAD: Radiation Biology Research at an Elevated Altitude through Dosimetry – A student-designed payload

NASA uses extreme environment platforms (ground testing facilities, high-altitude balloons and aircraft, and CubeSats) to provide greater understanding of the conditions and limitations of extra-terrestrial environments. As part of a two-week flight planned for summer 2021, RadBREAD (Radiation Biology Research at an Elevated Altitude through Dosimetry) will fly as a secondary payload consisting of a M-42C (German Aerospace Center, DLR) ionizing radiation dosimeter, UV micro-logger, and multiple desiccated yeast samples. The platform is a novel high-altitude solar-powered aircraft: the Swift Engineering High-Altitude samples. The platform is a novel high-altitude solar-powered aircraft: the Swift Engineering High-Altitude Long-Endurance Unmanned Aircraft System (HALE UAS), which offers significantly longer flight durations than other high-altitude platforms. The yeast Saccharomyces cerevisiae will provide meaningful biological correlation for the sensor readings, due to its resistance to extremely low temperature and pressure when desiccated, ease of genetic manipulation, and homology to human genes. The RadBREAD team comprises the 2020 cohort of NASA’s Space Life Sciences Training Program (SLSTP) research associates as well as NASA scientists, engineers and radiation experts from NASA and the DLR. Yeast survival, metabolic, and transcriptomic changes will be correlated with environmental data collected during long-term exposure to the upper atmosphere. Additionally, the team will evaluate the upper atmospheric environment (radiation, pressure, and temperature) provided by the HALE UAS platform as a Mars surface analog for biological payloads. We hypothesize that exposure to upper atmospheric conditions during the HALE UAS flight will alter the survival, metabolism, and transcriptome of desiccated wild-type S. cerevisiae upon rehydration compared to sensitive and tolerant yeast strains exposed to the same conditions, and between the flight samples compared to asynchronous ground controls.

radiation exposure↗
NASA NTRS2021

Fairfax County Urban Development: Identifying Urban Heat Mitigation Strategies for Climate Adaptation Planning in Fairfax County, Virginia

Extreme high temperatures lead to increased instances of cardiovascular disease, pulmonary disease, and even death, as well as increased energy consumption and infrastructure costs. People in urbanized areas experience higher temperatures than rural areas due to diminished vegetation and increased impervious surfaces which absorb and radiate heat. Fairfax County, Virginia has embarked on Resilient Fairfax, a program aimed at addressing climate adaptation and resilience. The DEVELOP team partnered with the Fairfax County Office of Environmental and Energy Coordination (OEEC) to assess the extent of the urban heat island effect on the county and its most vulnerable populations. The team used data from Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS), as well as the ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) for the years 2013 to 2021 and found that the hottest spots were in densely urbanized areas, with temperatures as much as 47°F above that of undeveloped reference areas. The team used the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) urban cooling model and determined that areas with higher tree canopy cover had greater heat mitigation capacity. Estimates from the InVEST model showed that a 4.5% increase in canopy cover across the county could result in a temperature reduction of up to 2.4°F in some areas. The results will allow partners to assess heat distribution across Fairfax County and implement effective mitigation strategies, including locating prime locations for cooling centers and increasing canopy cover.

W. Pierce Holloway↗
NASA NTRS2020

Mars 2020 Rover Adaptive Caching Assembly: Caching Martian Samples for Potential Earth Return

The Adaptive Caching Assembly (ACA) is part of the Sampling and Caching System on the Mars 2020 Perseverance Rover, and consists of multiple stations that process, hermetically seal, and store sample tubes containing collected Martian material, either rock cores or regolith samples, in preparation for caching on the surface of Mars. The ACA stations consist of seven active degrees-of-freedom, as well as a large number of passive mechanisms that must operate in extreme Mars temperature and pressure conditions. A robotic arm within the Rover manipulates the sample tubes between ACA stations as part of an end-to-end sampling sequence, and utilizes a compliant end effector to accommodate misalignments during station interactions. Stringent hardware cleanliness requirements were dictated to ensure collected samples would not be compromised, which significantly impacted the design, assembly, and test operations of the ACA. Three ACAs were assembled to support ground testing and flight operations, which were exposed to environmental testing to validate functionality in Mars-like conditions. A number of challenges existed from design through test, including volume constraints, mechanism controllability and operation, the effects of tight tolerances, and cleanliness requirements.

Lin, Justin↗
NASA NTRSDate not supplied

Roman Space Telescope - Demonstration of Integrated Thermal Control System Test for the Optical Telescope

On-orbit optical stability of the Nancy Grace Roman Space Telescope (RST) is a key requirement that enables multiple science objectives and drives multiple aspects of telescope design and analysis. Thermoelastic changes are typically large contributors to optical instability, and both extremely low CTE materials and extremely stable temperatures are needed to achieve the RST optical stability requirements. We will present the results from a test that demonstrated the L3Harris capability to sense and control temperatures to milli-kelvin levels of stability across a range of operating temperatures.

RST, Roman Space Telescope, Temperature Sensing, T↗
NASA NTRSDate not supplied

Roman Space Telescope – Demonstration of Integrated Thermal Control System Test for the Optical Telescope Assembly

On-orbit optical stability of the Nancy Grace Roman Space Telescope (RST) is a key requirement that enables multiple science objectives and drives multiple aspects of telescope design and analysis. Thermoelastic changes are typically large contributors to optical instability, and both extremely low CTE materials and extremely stable temperatures are needed to achieve the RST optical stability requirements. We will present the results from a test that demonstrated the L3Harris capability to sense and control temperatures to milli-kelvin levels of stability across a range of operating temperatures.

Peter Miller↗