Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standardized data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

A new world survey expression for cosmic ray vertical intensity vs. depth in standard rock

The cosmic ray data on vertical intensity versus depth below 10 to the 5th power g sq cm is fitted to a 5 parameter empirical formula to give an analytical expression for interpretation of muon fluxes in underground measurements. This expression updates earlier published results and complements the more precise curves obtained by numerical integration or Monte Carlo techniques in which the fit is made to an energy spectrum at the top of the atmosphere. The expression is valid in the transitional region where neutrino induced muons begin to be important, as well as at great depths where this component becomes dominant.

Crouch, M.↗

On-board attitude determination for the Topex satellite

This paper presents an overall technical description of the on-board attitude determination system for The Ocean Topography Experiment (Topex) satellite. The stellar-inertial attitude determination system being designed for the Topex satellite utilizes data from a three-axis NASA Standard DRIRU-II as well as data from an Advanced Star Tracer (ASTRA) and a Digital Fine Sun Sensor (DFSS). This system is a modified version of the baseline Multimission Modular Spacecraft (MMS) concept used on the Landsat missions. Extensive simulation and analysis of the MMS attitude determination approach was performed to verify suitability for the Topex application. The modifications to this baseline attitude determination scheme were identified to satisfy the unique Topex mission requirements.

Dennehy, C. J.↗

A Study of the Non-Thermal X-ray Emission of Shell-Type Supernova Remnants

The term of the forth year of the award is the period from March 15, 2003 to March 14, 2004. During this year, Dr. Thomas Pannuti, who had been performing most of the analyses, made a transition to a new position at Caltech. As of September 2003, Dr. Michael Stage began performing most of the analyses. Dr. Stage has begun constructing a detailed catalog of the spatial and spectral properties of young supernova remnants as described in sections 1 and 4 of the proposal. Specifically, he has focused on the analysis of Chandra ACIS data. The exquisite spatial resolution of the Chandra telescope and the modest spectral resolution of the CCDs make these data ideal. Dr. Stage has developed a standard set of procedures to reduce the data, generate telescope and detector response libraries and handle instrumental and celestial background subtraction. He has also adapted some existing code to automate spectral extraction and fitting. This code enables us to analyze the spectra of tens of thousands of small subregions of supernova remnants. Dr. Stage has recently applied this process to ACIS data for the supernova remnants Cas A and Kepler. The results include maps of the fitted parameters, such as individual line intensities and centroids (i.e. Doppler shifts), the electron temperature, and the absorption column density. These maps are more accurate than simple energy-cut images because it is difficult (and sometimes impossible) to cleanly separate the line emission from the underlying continuum (especially at low energies). It is now possible to identify the locations at which emission from each element is produced. Some of the elements are seen to be layered. The electron temperature maps demonstrate that the outer edges of Cas A and Kepler are very hot with weak lines. This emission is almost certainly synchrotron dominated. Therefore, not only are the maps interesting in and of themselves, but they also provide an unbiased means of easily identifying features in the remnants that can be studied in more detail using, for example, synchrotron models. Over the next year, Dr. Stage will refine the analysis procedures, expand the analyses to include several other remnants, present the results at major scientific conferences and publish a catalog of the results. Since this work is producing impressive results, we have applied for very long Chandra observations of Kepler and Tycho to obtain enough counts to take lull advantage of the technique. A i Ms observation of Cas A is already scheduled. Over the past year, I completed a joint, spectra,l analysis of some X-ray, radio, and gamma-ray data for the supernova remnant SN 1006. The results of this analysis show that the synchrotron and, hence, electron spectrum of the remnant is curved. The amount of curvature in the electron spectrum is quantitatively consistent with predictions of the amount of curvature in the proton spectrum of the remnant. A paper describing this work is nearly complete. When Dr. Pannuti left, he was analyzing X-ray data for the young supernova remnant G266.2-1.2. Dr. Pannuti found the first evidence of thermal X-ray emission from this remnant. Furthermore, like SN 1006, the cutoff frequency varies with azimuth along the bright northeastern rim. This work will be published during the coming year.

Allen, Glenn E.↗

Exploring New Pathways in Precipitation Assimilation

Precipitation assimilation poses a special challenge in that the forward model for rain in a global forecast system is based on parameterized physics, which can have large systematic errors that must be rectified to use precipitation data effectively within a standard statistical analysis framework. We examine some key issues in precipitation assimilation and describe several exploratory studies in assimilating rainfall and latent heating information in NASA's global data assimilation systems using the forecast model as a weak constraint. We present results from two research activities. The first is the assimilation of surface rainfall data using a time-continuous variational assimilation based on a column model of the full moist physics. The second is the assimilation of convective and stratiform latent heating retrievals from microwave sensors using a variational technique with physical parameters in the moist physics schemes as a control variable. We will show the impact of assimilating these data on analyses and forecasts. Among the lessons learned are (1) that the time-continuous application of moisture/temperature tendency corrections to mitigate model deficiencies offers an effective strategy for assimilating precipitation information, and (2) that the model prognostic variables must be allowed to directly respond to an improved rain and latent heating field within an analysis cycle to reap the full benefit of assimilating precipitation information. of microwave radiances versus retrieval information in raining areas, and initial efforts in developing ensemble techniques such as Kalman filter/smoother for precipitation assimilation. Looking to the future, we discuss new research directions including the assimilation

Hou, Arthur↗

Developing a distributed data dictionary service

This paper will explore the use of the Lightweight Directory Access Protocol (LDAP) using the ISO 11179 Data Dictionary Schema as a mechanism for standardizing the structure and communication links between data dictionaries.

datasets data dictionaries Lightweight Directory A↗

Data Acquisition System for Multi-Frequency Radar Flight Operations Preparation

A three-channel data acquisition system was developed for the NASA Multi-Frequency Radar (MFR) system. The system is based on a commercial-off-the-shelf (COTS) industrial PC (personal computer) and two dual-channel 14-bit digital receiver cards. The decimated complex envelope representations of the three radar signals are passed to the host PC via the PCI bus, and then processed in parallel by multiple cores of the PC CPU (central processing unit). The innovation is this parallelization of the radar data processing using multiple cores of a standard COTS multi-core CPU. The data processing portion of the data acquisition software was built using autonomous program modules or threads, which can run simultaneously on different cores. A master program module calculates the optimal number of processing threads, launches them, and continually supplies each with data. The benefit of this new parallel software architecture is that COTS PCs can be used to implement increasingly complex processing algorithms on an increasing number of radar range gates and data rates. As new PCs become available with higher numbers of CPU cores, the software will automatically utilize the additional computational capacity.

Leachman, Jonathan↗

Model Based Definition

In September 2007, the Engineering Directorate at the Marshall Space Flight Center (MSFC) created the Design System Focus Team (DSFT). MSFC was responsible for the in-house design and development of the Ares 1 Upper Stage and the Engineering Directorate was preparing to deploy a new electronic Configuration Management and Data Management System with the Design Data Management System (DDMS) based upon a Commercial Off The Shelf (COTS) Product Data Management (PDM) System. The DSFT was to establish standardized CAD practices and a new data life cycle for design data. Of special interest here, the design teams were to implement Model Based Definition (MBD) in support of the Upper Stage manufacturing contract. It is noted that this MBD does use partially dimensioned drawings for auxiliary information to the model. The design data lifecycle implemented several new release states to be used prior to formal release that allowed the models to move through a flow of progressive maturity. The DSFT identified some 17 Lessons Learned as outcomes of the standards development, pathfinder deployments and initial application to the Upper Stage design completion. Some of the high value examples are reviewed.

Rowe, Sidney E.↗

Characteristics of trapped proton anisotropy at Space Station Freedom altitudes

The ionizing radiation dose for spacecraft in low-Earth orbit (LEO) is produced mainly by protons trapped in the Earth's magnetic field. Current data bases describing this trapped radiation environment assume the protons to have an isotropic angular distribution, although the fluxes are actually highly anisotropic in LEO. The general nature of this directionality is understood theoretically and has been observed by several satellites. The anisotropy of the trapped proton exposure has not been an important practical consideration for most previous LEO missions because the random spacecraft orientation during passage through the radiation belt 'averages out' the anisotropy. Thus, in spite of the actual exposure anisotropy, cumulative radiation effects over many orbits can be predicted as if the environment were isotropic when the spacecraft orientation is variable during exposure. However, Space Station Freedom will be gravity gradient stabilized to reduce drag, and, due to this fixed orientation, the cumulative incident proton flux will remain anisotropic. The anisotropy could potentially influence several aspects of Space Station design and operation, such as the appropriate location for radiation sensitive components and experiments, location of workstations and sleeping quarters, and the design and placement of radiation monitors. Also, on-board mass could possible be utilized to counteract the anisotropy effects and reduce the dose exposure. Until recently only omnidirectional data bases for the trapped proton environment were available. However, a method to predict orbit-average, angular dependent ('vector') trapped proton flux spectra has been developed from the standard omnidirectional trapped proton data bases. This method was used to characterize the trapped proton anisotropy for the Space Station orbit (28.5 degree inclination, circular) in terms of its dependence on altitude, solar cycle modulation (solar minimum vs. solar maximum), shielding thickness, and radiation effect (silicon rad and rem dose).

Armstrong, T. W.↗

Geologic Interpretation of Data Sets Collected by Planetary Analog Geology Traverses and by Standard Geologic Field Mapping: A Comparison Study - Part 1

Geologic maps integrate the distributions, contacts, and compositions of rock and sediment bodies as a means to interpret local to regional formative histories. Applying terrestrial mapping techniques to other planets is challenging because data is collected primarily by orbiting instruments, with infrequent, spatiallylimited in situ human and robotic exploration. Although geologic maps developed using remote data sets and limited "Apollo-style" field access likely contain inaccuracies, the magnitude, type, and occurrence of these are only marginally understood. This project evaluates the interpretative and cartographic accuracy of both field- and remote-based mapping approaches by comparing two 1:24,000 scale geologic maps of the San Francisco Volcanic Field (SFVF), north-central Arizona. The first map is based on traditional field mapping techniques, while the second is based on remote data sets, augmented with limited field observations collected during NASA Desert Research & Technology Studies (RATS) 2010 exercises. The RATS mission used Apollo-style methods not only for pre-mission traverse planning but also to conduct geologic sampling as part of science operation tests. Cross-comparison demonstrates that the Apollo-style map identifies many of the same rock units and determines a similar broad history as the field-based map. However, field mapping techniques allow markedly improved discrimination of map units, particularly unconsolidated surficial deposits, and recognize a more complex eruptive history than was possible using Apollo-style data. Further, the distribution of unconsolidated surface units was more obvious in the remote sensing data to the field team after conducting the fieldwork. The study raises questions about the most effective approach to balancing mission costs with the rate of knowledge capture, suggesting that there is an inflection point in the "knowledge capture curve" beyond which additional resource investment yields progressively smaller gains in geologic knowledge.

Eppler, Dean B.↗

User data dissemination concepts for earth resources: Executive summary

The impact of the future capabilities of earth-resources data sensors (both satellite and airborne) and their requirements on the data dissemination network were investigated and optimum ways of configuring this network were determined. The scope of this study was limited to the continental U.S.A. (including Alaska) and to the 1985-1995 time period. Some of the conclusions and recommendations reached were: (1) Data from satellites in sun-synchronous polar orbits (700-920 km) will generate most of the earth-resources data in the specified time period. (2) Data from aircraft and shuttle sorties cannot be readily integrated in a data-dissemination network unless already preprocessed in a digitized form to a standard geometric coordinate system. (3) Data transmission between readout stations and central preprocessing facilities, and between processing facilities and user facilities are most economically performed by domestic communication satellites. (4) The effect of the following factors should be studied: cloud cover, expanded coverage, pricing strategies, multidiscipline missions.

Davies, R.↗

Open System Interconnection - NASA program communications of the future

Open Systems Interconnection (OSI) standards are being developed by the ISO and the Consultative Committee on International Telephone and Telegraph with the support of industry. These standards are being developed to allow the interconnecting of computer systems and the interworking of applications such that the applications can be independent of any equipment manufacturer. Significant progress has been made, and the establishment of government OSI standards is being considered. There is considerable interest within NASA in the potential benefits of OSI and in communications standards in general. The OSI standards are being considered for possible application in the Space Station onboard data management system. The OSI standards have reached a high level of maturity, and it is now imperative that NASA plan for future migration to OSI where appropriate.

Brady, Charles D.↗

Use of NASA Near Real-Time and Archived Satellite Data to Support Disaster Assessment

NASA's Short‐term Prediction Research and Transition (SPoRT) Center partners with the NWS to provide near realtime data in support of a variety of weather applications, including disasters. SPoRT supports NASA's Applied Sciences Program: Disasters focus area by developing techniques that will aid the disaster monitoring, response, and assessment communities. SPoRT has explored a variety of techniques for utilizing archived and near real‐time NASA satellite data. An increasing number of end‐users - such as the NWS Damage Assessment Toolkit (DAT) - access geospatial data via a Web Mapping Service (WMS). SPoRT has begun developing open‐standard Geographic Information Systems (GIS) data sets via WMS to respond to end‐user needs.

McGrath, Kevin M.↗

Ozone Production and Precursor Emission from Wildfires in Africa

Tropospheric ozone (O3) negatively impacts human health and is also a greenhouse gas. It is formed photochemically by reactions of nitrogen oxides (NOx) and volatile organic compounds (VOCs), of which wildfires are an important source. This study presents data from research flights sampling wildfires in West and Central African savannah regions, both close to the fires and after the emissions had been transported several days over the tropical North Atlantic Ocean. Emission factors (EFs) in g kg-1 for NOx (as NO), six VOCs and formaldehyde were calculated from enhancement to mole fractions in data taken close to the fires. For NOx, the emission factor was calculated as 2.05±0.43 g kg-1 for Senegal and 1.20±0.28 g kg-1 for Uganda, both higher than the average value of 1.13±0.6 g kg-1 for previous studies of African savannah regions. For most VOCs (except acetylene), EFs in Uganda were lower by factors of 20-50% compared to Senegal, with almost all the values below those in the literature. O3 enhancement in the fire plumes was investigated by examining the ΔO3/ΔCO enhancement ratio, with values ranging from 0.07 - 0.14 close to the fires up to 0.25 for measurements taken over the Atlantic Ocean up to 200 hours downwind. In addition, measurements of O3 and its precursors were compared to the output of a global chemistry transport model (GEOS-CF) for the flights over the Atlantic Ocean. Normalised mean bias (NMB) comparison between the measured and modelled data was good outside of the fire plumes, with CO showing a model under-prediction of 4.6% and O3 a slight over-prediction of 0.7% (both within the standard deviation of the data). For NOx the agreement was poorer, with an under-prediction of 9.9% across all flights. Inside the fire plumes the agreement between modelled and measured values is worse, with the model being biased significantly lower for all three species. In total across all flights, there was an under-prediction of 29.4%, 16.5% and 37.5% for CO, O3 and NOx respectively. Finally, the measured ΔO3/ΔCO enhancement ratios were compared those in the model for the equivalent flight data, with the model showing a lower value of 0.17±0.03 compared to an observed value of 0.29±0.05. The results detailed here show that the O3 burden to the North Atlantic Ocean from African wildfires may be underestimated and that further study is required to better study the O3 precursor emissions and chemistry.

James D Lee↗

New developments in space radiation research at NASA: Annotating data using a novel radiation biology ontology

Like many interdisciplinary sciences, data producers and consumers in the field of radiation biology often use a wide variety of terminology to describe their experiments and data. Furthermore, space systems and technologies are rapidly evolving, and a shared understanding and common terminology for these is also lacking. The efficiency of research organizations can be enhanced by standardizing metadata through the use of knowledge resources like ontologies. Employing a sophisticated model such as a formal ontology to standardize metadata enables automated data acquisition processes and supports more complete, accurate meta-analysis through more efficient and complete data discovery and retrieval, particularly when using multiple data sources. Thus, we developed the Radiation Biology Ontology (RBO) in order to improved radiation biology metadata uniformity and transparency. We used open-source software (the Ontology Development Kit, Protégé and WebProtégé) and worked within the OBO Foundry framework, which includes a set of ontology development principles and practices for ontology consistency, uniformity, and accountability. The RBO has now been incorporated into two radiation research data repositories, NASA’s GeneLab omics database (https://genelab.nasa.gov), and the European Commission STORE database (https://www.storedb.org/). Continuous build integration tools allowed our international RBO collaboration to be more efficient and focus its efforts on semantic model design. Currently, the RBO contains over 300 annotated classes and individuals specific to the study of radiation on biological systems, as well as imports of many additional classes from other OBO Foundry ontologies that relate to and/or provide context for these RBO entities. We publish the RBO through the OBO Foundry, so that it is available for browsing, download, and querying through NCBI Bioportal web site and application programming interface. The NASA Ames Life Science Data Archive (ALSDA) is also in the process of adopting use of the RBO, taking NASA one step closer to a knowledge-based system for space biology data. It is our hope that the global communities of radiation research Investigators, data curators and data analysts can similarly leverage the RBO and will contribute to its further development.

radiation↗

Some results of the testing of a full-scale Ogee tip helicopter rotor; acoustics, loads, and performance

Full-scale tests were utilized to investigate the effect of the Ogee tip on helicopter rotor acoustics, performance, and loads. Two facilities were used for this study: the Langley whirl tower and a UH-1H helicopter. The test matrix for hover on the whirl tower involved thrust values from 0 to 44,480 N (10,000 lbs) at several tip Mach numbers for both standard and Ogee rotors. The full-scale testing on the UH-1H encompassed the major portion of the flight envelope for that aircraft. Both near-field acoustic measurements as well as far-field flyover data were obtained for both the Ogee and standard rotors. Data analysis of the whirl-tower test shows that the Ogee tip does significantly diffuse the tip vortex while providing some improvement in hover performance. Flight testing of both rotors indicates that the strong impulsive noise signature of the standard rotor can be reduced with the Ogee rotor. Forward flight performance was significantly improved with the Ogee configuration for a large number of flight conditions. Further, rotor control loads and vibrations were reduced through use of this advanced tip rotor.

Mantay, W. R.↗

GeneLab: Overview of Challenges and Opportunities

The NASA GeneLab project capitalizes on multi-omic technologies to maximize the return on spaceflight experiments. To do this, GeneLab maintains a publicly accessible database (GLDS) that houses spaceflight and spaceflight relevant multi-omics data, and collaborates with NASA principal investigators and projects to generate additional omics data. GeneLab houses more than 200 transcriptomic, proteomic, metabolomic and epigenomic datasets from plant, animal and microbial experiments, with a growing number of these having been produced by the GeneLab sample processing lab. The GLDS contains rich metadata about each experiment and has recently integrated radiation dosimetery data from experiments flown on the Space Shuttle. GeneLab has also recently implemented an effort to present processed data in the GLDS in addition to the raw omics data. The processed data will enable interpretation of the data by a larger group of students, scientists and the general public. Standard pipelines for the transformation of raw data into visualizations were developed by four GeneLab Analysis Working Groups (animals, plants, microbes, multi-omics) comprised of over 100 scientists from NASA and academia. These pipelines are now being used by a group of bioinformatics interns to provide standard basic analysis of the data for incorporation into GLDS.

Galazka, Jonathan M.↗

GeneLab: Open Science for Life in Space

The NASA GeneLab project capitalizes on multi-omic technologies to maximize the return on spaceflight experiments. To do this, GeneLab maintains a publicly accessible database (GLDS) that houses spaceflight and spaceflight relevant multi-omics data, and collaborates with NASA principal investigators and projects to generate additional omics data. GeneLab houses more than 200 transcriptomic, proteomic, metabolomic and epigenomic datasets from plant, animal and microbial experiments, with a growing number of these having been produced by the GeneLab sample processing lab. The GLDS contains rich metadata about each experiment and has recently integrated radiation dosimetery data from experiments flown on the Space Shuttle. GeneLab has also recently implemented an effort to present processed data in the GLDS in addition to the raw omics data. The processed data will enable interpretation of the data by a larger group of students, scientists and the general public. Standard pipelines for the transformation of raw data into visualizations were developed by four GeneLab Analysis Working Groups (animals, plants, microbes, multi-omics) comprised of over 100 scientists from NASA and academia. These pipelines are now being used by a group of bioinformatics interns to provide standard basic analysis of the data for incorporation into GLDS.

Galazka, Jonathan M.↗

T and F comparisons via broadcasting satellite and navigation technology satellite

The preliminary time/frequency dissemination experiments were made using the BSE. In order to establish the technique of the doppler shift canceling, the phase control servo including the satellite link and the precompensating frequency control using the measured values or using the orbital data of the satellite are tested. The amount of the residual doppler shift at the control station can be reduced to the order of 1 part in 10 to the 12th power or less by use of the first and the second methods. The method using the orbit data is expected to give a control capability of a few parts in 10 to 11th power. Thus, the maximum value of the doppler shift at the farther most place of the country is estimated to be + or - 2 x 10 to the -10 power without any correction. The experiment of the international time comparison via the NTS 1 was made for about one year since October 1978. The data of time difference between UTC(USNO) and UTC(RRL) are in good agreement with those via the portable clock of the USNO. By applying the correction for ionospheric delay the standard deviation of the data can be reduced to about one-half.

Saburi, Y.↗