Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Effect of an electric field on the properties of BN Möbius stripes

In the present work, we present a first-principles study on the effects of an external electric field on the structural stability and electronic properties of boron nitride Möbius stripes with armchair and zigzag chirality. The calculation results indicate that the gap energy can be remarkably reduced by the application of an external field. Such reduction is in principle attributed to the occurrence of Stark effect, which significance depends on the orientation of the applied field relative to the stripe axis. Moreover, the electric field produces significant changes on dipole momentum of the structure and induces a negative shift on the calculated total energy, reducing the obtained formation energy. - Highlights: • The gap energy is remarkably reduced by the application of an external field. • The electric field produces significant changes on dipole momentum. • The field induces a negative shift on the total energy due to Stark effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of twin boundaries and pre-existing defects on mechanical properties and deformation mechanisms of yttria-stabilized tetragonal zirconia

In annealing of yttria-stabilized tetragonal zirconia (YSTZ), {011}-specific twins and sub-surface defects are often observed, however their effects on the martensitic phase transformation and deformation behavior of YSTZ have never been investigated. In this work, the roles of twin boundaries (TBs) and pre-existing defects in determining the mechanical properties and subsequent deformation mechanisms of YSTZ nanopillars are studied. Using large-scale molecular dynamics simulations, we show that Young’s modulus and strength of YSTZ decrease with the increase of TB density, but the ductility of YSTZ pillars increases. Phase transformation behavior is found to be correlated to TB density. The sensitivity of mechanical responses of twinned structures to pre-existing defects is also studied. A competitive mechanism between TB-induced phase transformation and void-induced phase transformation is observed. When the diameter of a pre-existing void is smaller than a critical value, only TB-induced phase transformation occurs, which leads to void-insensitive mechanical properties.

36 MATERIALS SCIENCE↗

Stability analysis of Monte Carlo burnup calculation based on PWR fuel rods

The existing Monte Carlo burnup algorithms may give some unstable results when using multiple burnable cells during burnup calculations. A very small time step is required to maintain the stability of the system, which pose some limits for the realistic applications. In this paper, we firstly repeat the instability issue by using a Monte Carlo code based on a typical PWR fuel rod model. Then, a theoretical stability analysis was carried out by using the perturbation theory in order to get a better understanding about the property of system stability. We determine a perturbation matrix which relates some main influence factors, such as the time step and the height of fuel rod, it can help people estimate the stability of burnup calculation system and the results are quantitatively consistent with the Monte Carlo code. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Structural, Magnetic, and Magnetoelastic Properties of High Nd-Content Laves Alloys Prepared by Solid-State Synthesis

The magnetostrictive alloys with composition Tb{sub 0.4}Nd{sub 0.6}(Fe{sub 0.8}Co{sub 0.2}){sub x} (1.50 ≤ × ≤ 1.90) are synthesized using the solid-state mechanical alloying (MA) method followed by sintering. The phase component, structure, thermal stability, and magnetoelastic properties are investigated as functions of composition, milling process, and annealing temperature. An amorphous phase companied by free alpha-iron is formed by MA in a high-energy ball mill, which crystallizes into MgCu{sub 2}-type and PuNi{sub 3}-type structures with different annealing temperatures. A single Laves phase for the high Nd-content Tb{sub 0.4}Nd{sub 0.6}(Fe{sub 0.8}Co{sub 0.2}){sub 1.60} is formed at optimal conditions for heat treating at 700 °C for 30 min. A large linear anisotropic magnetostriction λ{sub a} (=λ{sub ||}–λ{sub ⊥}) as high as 560 ppm at 12 kOe is obtained for the sintered alloy, which may make it a promising magnetostrictive material. Meanwhile, this work may help to open up a new way to search for Laves phase magnetostrictive materials containing Nd.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Site Occupancy Preference and Magnetic Properties in Nd 2 (Fe,Co) 14 B

Partial replacement of Fe by Co is an effective method to increase Curie temperature (T C ) , which improves the thermal stability of magnetic properties in Nd 2 Fe 14 B-based permanent magnets. The correlation between Fe substitution and magnetic properties has been studied in Nd 2 (Fe,Co) 14 B via a first-principles calculation. The calculated Fe substitution energies indicate that the Co atoms avoid the 8 j 2 site, which agrees with the experiments. The Co atoms are ferromagnetically coupled with Fe sublattice and show magnetic moments of about 1.2 to 1.7 μ B at different crystallographic sites, less than that of Fe (2.1–2.7 μ B ), resulting in the decrease in total magnetization at ground state (0 K) with increasing Co content. The effective exchange interaction parameter, derived from the energy difference between varied magnetic structures, increases from 7.8 meV to 17.0 meV with increasing Co content from x = 0 to x = 14 in Nd 2 Fe 14–x Co x B. This change in the effective exchange interaction parameter is responsible for the enhancement of T C in Nd 2 (Fe,Co) 14 B. The total magnetization at 300 K, derived from mean-field theory, shows a peak maximum value at x = 1 in Nd 2 Fe 14–x Co x B. The phenomenon results from the interplay between the reduction of the magnetic moment in the Fe(Co) sublattice and the enhancement of T C with increasing Co content.

36 MATERIALS SCIENCE↗

Ab initio study of point defects in PbSe and PbTe: Bulk and nanowire

First principles investigations, within the spin-polarized density functional theory, are performed to study energetic stability and electronic properties of point defects (vacancies and antisites) in PbSe and PbTe: bulk and nanowire (NW). Our results show that the energetic stability of these defects is ruled by relaxation process. These defects have lower formation energies in the nanowire structures as compared to the bulk, being more stable in the surface of the NWs. We also show that in the bulk system only one charge state is stable, otherwise, due to the larger band gaps, more than one charge state may be stable in the NWs. In addition, we have investigated how the presence of intrinsic defects affects the electronic properties of bulk and NW systems. Vacancies give rise to new electronic states near to the edges of the valence and conduction bands while the energetic position of the electronic states from antisites depends on the charge state, being localized inside the band gap or near the edges of the valence or conduction bands. We discuss how these changes in the electronic properties due to intrinsic defects may affect the thermoelectric properties of PbSe and PbTe NWs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Syntheses, crystal structures and characterizations of new vanadium arsenites and arsenates

Systematic explorations in vanadium arsenites and arsenates led to the isolation four new compounds, namely, {alpha}-(V{sup IV}O){sub 3}(As{sup III}O{sub 3}){sub 2} (1), {beta}-(V{sup IV}O){sub 3}(As{sup III}O{sub 3}){sub 2} (2), (V{sup IV}O)[V{sup IV}O(H{sub 2}O)]{sub 2}(As{sup V}O{sub 4}){sub 2} (3), V{sup III}V{sup IV}O{sub 2}(As{sup V}O{sub 4}) (4). Compounds 1, 2 and 4 were synthesized by standard solid-state reactions, and compound 3 is a vanadium arsenate dihydrate synthesized through hydrothermal reactions. Compounds 1 and 2 are isomers, and they represent the first examples of ternary inorganic vanadium(IV) arsenites. Single crystal X-ray diffraction analysis indicated that the four compounds display four different structural types. Magnetic property measurements for compound 1 indicated that it exhibits ferromagnetism with the Curie temperature T{sub c}=65 K. Thermal stability and optical properties for compounds 1 and 3 were also investigated. - Graphical abstract: Hydrothermal or solid state reactions of V{sub 2}O{sub 5} (or VO{sub 2}) and As{sub 2}O{sub 3} yielded four new ternary compounds with four different types of structures, namely, {alpha}-(VO){sub 3}(AsO{sub 3}){sub 2} (1), {beta}-(VO){sub 3}(AsO{sub 3}){sub 2} (2), (VO)[VO(H{sub 2}O)]{sub 2}(AsO{sub 4}){sub 2} (3), (VO){sub 2}(AsO{sub 4}) (4). {alpha}-(VO){sub 3}(AsO{sub 3}){sub 2} (1), {beta}-(VO){sub 3}(AsO{sub 3}){sub 2} (2) represent the first examples of ternary inorganic vanadium(IV) arsenites. Highlights: Black-Right-Pointing-Pointer Hydrothermal or solid state reactions of V{sub 2}O{sub 5} (or VO{sub 2}) and As{sub 2}O{sub 3} yielded two new arsenites. Black-Right-Pointing-Pointer They represent the first examples of ternary vanadium arsenites. Black-Right-Pointing-Pointer Two new ternary vanadium arsenates were also obtained. Black-Right-Pointing-Pointer They exhibit four different structural types.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Absolute stability analysis of attitude control systems for large boosters.

A method for performing an absolute stability analysis of attitude control systems for large launch vehicles is presented. Absolute stability of these systems is shown to be of a limited extent. The regions of absolute stability are computed by using a quadratic Liapunov function. The function is chosen to provide additional information about the exponential property of absolute stability. A system model is used to illustrate the method.

Siljak, D. D.↗

Advanced powder metallurgy aluminum alloys via rapid solidification technology

Aluminum alloys containing 10 to 11.5 wt. pct. of iron and 1.5 to 3 wt. pct. of chromium using the technique of rapid solidification powder metallurgy were studied. Alloys were prepared as thin ribbons (.002 inch thick) rapidly solidified at uniform rate of 10(6) C/second by the melt spinning process. The melt spun ribbons were pulverized into powders (-60 to 400 mesh) by a rotating hammer mill. The powders were consolidated by hot extrusion at a high reduction ratio of 50:1. The powder extrusion temperature was varied to determine the range of desirable processing conditions necessary to yield useful properties. Powders and consolidated alloys were characterized by SEM and optical metallography. The consolidated alloys were evaluated for (1) thermal stability, (2) tensile properties in the range, room temperature to 450 F, and (3) notch toughness in the range, room temperature to 450 F.

Ray, R.↗

Low-Dielectric-Constant Polyimide Fibers

In experiments performed at NASA Langley Research Center, low-dielectric-constant polyimide fibers produced by use of resin extrusion. These fibers also have high thermal stability and good tensile properties. Useful in industrial and aerospace applications in which fibers required to have dielectric constants less than 3, high thermal stability, and tensile properties in range of those of standard textile fibers. Potential applications include use in printed circuit-boards and in aircraft composites.

Dorogy, William E., Jr.↗

First-Principle Calculations of Structural, Elastic, and Electronic Properties of Intermetallic Rare Earth R{sub 2}Ni{sub 2}Pb (R = Ho, Lu, and Sm) Compounds

The structural, elastic, and electronic properties of rare earth intermetallic R{sub 2}Ni{sub 2}Pb (where R = Ho, Lu, and Sm) compounds were investigated with the density functional theory (DFT) calculations. The calculations are performed using the full potential-linearized augmented plane wave (FP-LAPW) method within the framework of local density approximation (LDA). The calculated values of the equilibrium lattice constants were in agreement with the available experimental values. The elastic constants (C{sub ij}) were also calculated to understand the mechanical properties and structural stability of the compounds. Furthermore, the density of states and the charge density distributions of the compounds were calculated to understand the nature of the bonding in the material. The calculated results are in accordance with the available data in the literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of colloidal aqueous synthesized 3 mercaptopropionic acid stabilized CdS quantum dots

We have explored an easiest and simplest aqueous route to synthesize bright green luminescent CdS QDs using 3-Mercaptopropionic acid (MPA) as a stabilizer in air ambient for solar cell applications. The CdS quantum dots showed a strong quantum confinement effect with good stability, size and excellent photoluminescence. MPA Capping on CdS QDs was confirmed through FTIR. The Optical absorption spectrum revealed the CdS quantum dots are highly transparent in the visible region with absorption peak at 380 nm, confirming the quantum confinement. Photoluminescence showed an emission peak at 525 nm wavelength. The optical band gap energy was found to be 3.19 eV and CdS quantum dots radius calculated using Brus equation is 1.5 nm. The results are presented and discussed in detail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A numerical study of the thermal stability of solar loops

An important property of all loops is their thermal stability. If low lying hot loops were thermally unstable, for example, a great majority of the low loops on the Sun might be expected to be cool. How small perturbations evolve in low lying, linearly unstable hot loops was determined and how high lying, linearly stable hot loops respond to large amplitude disturbances such as might be expected on the Sun were examined. Only general descriptions and results are given.

Klimchuk, J. A.↗

Effect of irradiation on the luminescence properties of low-dimensional SiGe/Si(001) heterostructures

This study is concerned with the effect of irradiation on the luminescence properties of low-dimensional Si/Ge heterostructures with different degrees of spatial localization of charge carriers. It is shown that the radiation stability of Si/Ge heterostructures is improved with increasing efficiency of localization of charge carriers in the structures. The spatial localization of charge carriers in the SiGe nanostructures decreases the probability of nonradiative recombination of charge carriers at radiation defects produced in the Si matrix. It is demonstrated that, among the structures explored in the study, the highest radiation stability of luminescence properties is inherent in the multilayered structures containing self-assembled Ge(Si) nanoislands, in which the most efficient spatial localization of charge carriers is attained. In this case, the localization is three- and two-dimensional, correspondingly, for holes in the islands and for electrons in the Si layers that separate neighboring layers containing the islands.

36 MATERIALS SCIENCE↗

Enhanced thermal stability of phosphate capped magnetite nanoparticles

We have studied the effect of phosphate capping on the high temperature thermal stability and magnetic properties of magnetite (Fe{sub 3}O{sub 4}) nanoparticles synthesized through a single-step co-precipitation method. The prepared magnetic nanoparticles are characterized using various techniques. When annealed in air, the phosphate capped nanoparticle undergoes a magnetic to non-magnetic phase transition at a temperature of 689 °C as compared to 580 °C in the uncoated nanoparticle of similar size. The observed high temperature phase stability of phosphate capped nanoparticle is attributed to the formation of a phosphocarbonaceous shell over the nanoparticles, which acts as a covalently attached protective layer and improves the thermal stability of the core material by increasing the activation energy. The phosphocarbonaceous shell prevents the intrusion of heat, oxygen, volatiles, and mass into the magnetic core. At higher temperatures, the coalescence of nanoparticles occurs along with the restructuring of the phosphocarbonaceous shell into a vitreous semisolid layer on the nanoparticles, which is confirmed from the small angle X-ray scattering, Fourier transform infra red spectroscopy, and transmission electron microscopy measurements. The probable mechanism for the enhancement of thermal stability of phosphocarbonaceous capped nanoparticles is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Accelerating the Structure Exploration of Diverse Bi–Pt Nanoclusters via Physics‐Informed Machine Learning Potential and Particle Swarm Optimization

Bimetallic Bi–Pt nanoclusters exhibit diverse structural motifs, including core-shell, Janus, and mixed alloy configurations, due to the unique bonding characteristics between Bi and Pt atoms. Using density functional theory refinements from ChIMES physically machine-learned potential and CALYPSO particle swarm optimization global searches, 34 Bi20-Pt20 nanoclusters are systematically classified. The results reveal that Bi atoms predominantly occupy surface sites, driven by charge transfer effects. Cohesive energy trends alone prove insufficient for structure differentiation, necessitating a data-driven approach employing principal component analysis and K-means clustering. Furthermore, vibrational, electronic, and infrared spectral analyses provide additional insights into structure-property relationships. The findings offer an original framework for the automated classification and analysis of bimetallic nanoclusters, enhancing the understanding of their stability and functional properties.

bimetallic nanoparticles↗

Synthesis, microstructure and magnetic properties of Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} soft magnetic composite core

Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} soft magnetic composite core have been synthesized via a modified stöber method combined with following high temperature sintering process. Most of conductive Fe{sub 3}Si{sub 0.7}Al{sub 0.3} particles could be uniformly coated by insulating SiO{sub 2} using the modified stöber method. The Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles exhibited good soft magnetic properties with low coercivity and high saturation magnetization. The reaction 4Al+3SiO{sub 2}=2α-Al{sub 2}O{sub 3}+3Si took place during the sintering process. As a result the new Fe{sub 3}Si/Al{sub 2}O{sub 3} composite was formed. The Fe{sub 3}Si/Al{sub 2}O{sub 3} composite core displayed more excellent soft magnetic properties, better frequency stability at high frequencies, much higher electrical resistivity and lower core loss than the pure Fe{sub 3}Si{sub 0.7}Al{sub 0.3} core. The method of introducing insulating layers surrounding magnetic particles provides a promising route to develop new and high compact soft magnetic materials with good magnetic and electric properties. - Graphical abstract: In Fe{sub 3}Si/Al{sub 2}O{sub 3} composite, Fe{sub 3}Si phases are separated by Al{sub 2}O{sub 3} layers and the eddy currents are confined in Fe{sub 3}Si phases, thus increasing resistivity and reducing core loss. - Highlights: • Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} cores were prepared. • Fe{sub 3}Si{sub 0.7}Al{sub 0.3} particles could be uniformly coated by nano-sized SiO{sub 2} clusters. • Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} cores showed good soft magnetic properties. • Fe{sub 3}Si/Al{sub 2}O{sub 3} had lower core loss and better frequency stability than Fe{sub 3}Si{sub 0.7}Al{sub 0.3} cores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magneto-Rayleigh-Taylor instability in solid media

A linear analysis of the magneto-Rayleigh-Taylor instability at the interface between a Newtonian fluid and an elastic-plastic solid is performed by considering a uniform magnetic B{sup →}, parallel to the interface, which has diffused into the fluid but not into the solid. It is found that the magnetic field attributes elastic properties to the viscous fluid which enhance the stability region by stabilizing all the perturbation wavelengths shorter than λ{sub 0}∝B{sup 2} for any initial perturbation amplitude. Longer wavelengths are stabilized by the mechanical properties of the solid provided that the initial perturbation wavelength is smaller than a threshold value determined by the yield strength and the shear modulus of the solid. Beyond this threshold, the amplitude grows initially with a growth rate reduced by the solid strength properties. However, such properties do not affect the asymptotic growth rate which is only determined by the magnetic field and the fluid viscosity. The described physical situation intends to resemble some of the features present in recent experiments involving the magnetic shockless acceleration of flyers plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗