Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spatial resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Arcjet Supplemental Diagnostics

This document proposes a new set of diagnostics designed to be implemented on the NASA Ames miniature Arcjet Research Chamber (mARC) for improved characterization of the flow. The diagnostics are grouped into three classes:higher cadence measurements, higher spatial resolution, and computer vision techniques for improved analysis of existing imaging. The goal is to better understand and quantify the following properties: flow statistics/uncertainty, temporal & spatial non-uniformity, flow temperature/enthalpy

Haw, Magnus A.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-31770-DND

HREBSD (high resolution electron backscatter diffraction) is a scanning electron microscope based diffraction technique that measures stress, elastic strain and dislocation density in crystalline materials with a spatial resolution on the order of tens of nanometers. This information represents a glut of quantitative data that may be directly incorporated in microscale crystal plasticity models. However, concerns over the accuracy of HREBSD make integration of microscopy data with material models problematic. This presentation addresses a number of issue concerning the accuracy of HREBSD, including pattern center error, cross-correlation error and random noise. Additionally, a computational framework is presented that allows for rapid, non-deterministic calibration of material models. Finally, several tests cases are presented where HREBSD is cross-validated with other diffraction techniques: X-ray diffraction, electron channeling contrast imaging and transmission electron microscopy. The accuracy of HREBSD, when incorporating these new techniques, is sufficient to measure local stress to below 10 MPa and to detect individual dislocations.

Timothy J Ruggles↗
NASA NTRSDate not supplied

MaGIXS 2: Preparations for the Second Flight of the Marshall Grazing Incidence X-ray Spectrometer

Overview MaGIXS is a slitless soft X-ray (SXR) imaging spectrometer designed to observe solar active regions. - The instrument produces spatially resolved SXR spectra, known as “overlappograms.” (Athiray et al. 2019 & Champey et al., 2022) The first sounding rocket flight of the Marshall Grazing Incidence X-ray Spectrometer occurred on July 30, 2021 from the White Sands Missile Range, New Mexico. - Spectrally pure images of X-ray bright points were obtained through the inversion of overlappograms, e.g. Fig. 3 (Savage et al., 2022). MaGIXS 2 is a simplified version of the original design, less the spectrometer mirror pair. - Eliminating the spectrometer mirror pair improves spatial resolution, increases effective area and the field of view (Table 1). No field stop in this design, data will be an overlappogram with the same spatial and spectral plate scale.

x-ray spectrometer, x-ray optics, solar corona, so↗
NASA NTRSDate not supplied

An Overview of MaGIXS-2, The Second Flight of the Marshall Grazing Incidence X-ray Spectrometer

MaGIXS is a slitless soft X-ray (SXR) imaging spectrometer designed to observe solar active regions. - The instrument produces spatially resolved SXR spectra, known as “overlappograms.” (Athiray et al. 2019 & Champey et al., 2022) The first sounding rocket flight of the Marshall Grazing Incidence X-ray Spectrometer occurred on July 30, 2021 from the White Sands Missile Range, New Mexico. - Spectrally pure images of X-ray bright points were obtained through the inversion of overlappograms, e.g. Fig. 3 (Savage et al., 2022). MaGIXS 2 is a simplified version of the original design, less the spectrometer mirror pair. - Eliminating the spectrometer mirror pair improves spatial resolution, increases effective area and the field of view (Table 1). No field stop in this design, data will be an overlappogram with the same spatial and spectral plate scale.

x-ray spectrometer, x-ray optics, solar corona, so↗
NASA NTRSDate not supplied

Geometric Assessment of PlanetScope Imagery

Commercial companies such as Maxar, Planet Labs, and BlackSky have built large archives of high resolution (1-3 m) Earth observing data. The high temporal resolution and global coverage of these satellites makes commercial satellite images ideal for scientists studying rapidly changing processes such as flooding and fires. The high spatial resolution allows scientists to push studies to a fine scale such as monitoring agricultural growth experiments or detecting vehicles for traffic management. Scientists using these data need to know geolocation accuracy, band-to-band registration (BBR), and pixel footprint size to best determine appropriate applications as well as what extra steps they will need to take to use the data. Here, we find those key geometric properties for images from Planet Labs’ SuperDove constellation. Geolocation accuracy is assessed relative to WorldView images at globally distributed cities, band-to-band registration (BBR) is examined for every image we acquired (200+ images), and pixel footprint sizes are calculated from edge responses of the images over Cal/Val sites in China, India, or USA both near launch time and 1+ years after launch. We find that SuperDove geolocation is highly self-consistent with average global offsets among SuperDove images of 3.80 m (1.27 pixels). Despite this self-consistency, relative geolocation accuracy (with WorldView images as reference) varies by location from 3.20 m – 28.09 m mean offset. SuperDove BBR is sub-pixel and varies by band, with a mean radial offset relative to red band varying from 0.39 - 1.13 m. SuperDove image footprint size improves after 1+ years in orbit, with an average footprint size of 3.41 pixels (10.24 m) soon after launch and 3.23 pixels (9.7 m) 1+ years after launch. The BBR and self-consistency offsets are relatively small, given the large footprint sizes. A similarly extensive investigation is in progress for Planet Labs’ Dove-R series.

Alana G. Semple↗
NASA NTRS2023

Shape from spectra

We introduce a new unified atmospheric–topographic correction approach that estimates surface geometry directly from the radiance measurement. Surface topography influences the at-sensor radiance measurement, making precise topography modeling critical in applications like vegetation or snow studies in mountainous terrain. Currently, elevation maps are used to derive topographic variables such as the slope and sky-view factor. This process is error-prone since static global digital elevation models do not generally achieve the accuracy required, and even minor mismatches in spatial resolution can introduce significant artifacts in downstream processing. Here we demonstrate that it is possible to estimate topographic parameters directly from spectral data, ensuring perfect physical consistency, temporal coincidence, and spatial alignment. We present experiments estimating topographic slope in two scenes in Southern California, with data from NASA’s Next Generation Airborne Visible/Near Infrared Imaging Spectrometer (AVIRIS-NG). We compared our radiance-based estimates against high-resolution lidar datasets. Our initial validation result showed a correlation of R 2 = 0.864 (n = 160) over the homogeneous surface of Beckman Auditorium’s cone-shaped roof on the Caltech campus in Pasadena, California. We then validate the model over a larger study site near Santa Clarita, California, finding R 2 = 0.923 (n = 40,000) in a 350 x 350m area. The accuracy of our model estimates, combined with its systematic advantages over the alternative, show the potential of the approach for use in both airborne campaigns and orbital missions.

Nimrod Carmon↗
NASA NTRS1989

High resolution color band pyrometer ratioing

The sensing head of a two-color band ratioing pyrometer of a known type using a fiber optic cable to couple radiation to dual detector photodiodes is improved to have high spatial resolution by focusing the radiation received through an objective lens (i.e., by focusing the image of a target area) onto an opaque sheet spaced in front of the input end of the fiber optic cable. A two-mil hole in that sheet then passes radiation to the input end of the cable. The detector has two channels, one for each color band, with an electronic-chopper stabilized current amplifier as the input stage followed by an electronic-chopper stabilized voltage amplifier.

Bickler, Donald B.↗
NASA NTRS2004

Exploring the Moon and Mars Using an Orbiting Superconducting Gravity Gradiometer

Gravity measurement is fundamental to understanding the interior structure, dynamics, and evolution of planets. High-resolution gravity maps will also help locating natural resources, including subsurface water, and underground cavities for astronaut habitation on the Moon and Mars. Detecting the second spatial derivative of the potential, a gravity gradiometer mission tends to give the highest spatial resolution and has the advantage of requiring only a single satellite. We discuss gravity missions to the Moon and Mars using an orbiting Superconducting Gravity Gradiometer and discuss the instrument and spacecraft control requirements.

Paik, Ho Jung↗
NASA NTRS2006

Moon Mineralogy Mapper: Unlocking the Mysteries of the Moon

Moon Mineralogy Mapper (M3) is a state-of-the-art high spectral resolution imaging spectrometer that will characterize and map the mineral composition of the Moon. The M3 instrument will be flown on Chandrayaan-I, the Indian Space Research Organization (ISRO) mission to be launched in March 2008. The Moon is a cornerstone to understanding early solar system processes. M3 high-resolution compositional maps will dramatically improve our understanding about the early evolution of the terrestrial planets and will provide an assessment of lunar resources at high spatial resolution.

Runyon, Cassandra↗
NASA NTRS2007

Sources of and Remedies for Removing Unwanted Reflections in Millimeter Wave Images of Complex SOFI-Covered Structures

In the recent years, continuous-wave (CW) near-field and lens-focused millimeter wave imaging systems have been effectively. used to demonstrate their utility for producing high-resolution images of metallic structures covered with spray on foam insulation (SOFI) such as the space shuttle external tank. These systems have produced images with a spatial resolution of approximately 2 mm at a frequency of 150 GHz, and can easily interrogate thin as well as thick SOFI (> 9") enabling detection and evaluation of flaws such as voids, disbands, delaminations and corrosion. These systems are relatively simple, inexpensive, easy-to-use, require little to no signal processing of the raw data, on-site friendly, real-time and small. However, for some specific structures a certain interference pattern may be superimposed on the produced images. Generally, this occurs when the SOFI surface is at a relatively significant angle with respect to the surface of the substrate (or other sub-structures) on which it is sprayed. Consequently, the reflection from the surface of the SOFI and that from the substrate (or sub-structure) coherently combine into an interference pattern as the SOFI surface is scanned. There are methods by which the influence of this unwanted interference can be reduced, such as the incorporation of an incidence angle and the proper use of signal polarization. This paper presents the basics of this problem and describes the use of the methods for reducing this unwanted influence through several specific examples. A discussion on how the use of a swept-frequency or pulsed method may also alleviate this problem is also presented.

Khakovsky, S.↗
NASA NTRS2012

EPE The Extreme Physics Explorer

The Extreme Physics Explorer (EPE) is a mission concept that will address fundamental and timely questions in astrophysics which are primary science objectives of IXO. The reach of EPE to the areas outlined in NASA RFI NNH11ZDA018L is shown as a table. The dark green indicates areas in which EPE can do the basic IXO science, and the light green areas where EPE can contribute but will not reach the full IXO capability. To address these science questions, EPE will trace orbits close to the event horizon of black holes, measure black hole spin in active galactic nuclei (AGN), use spectroscopy to characterize outflows and the environment of AGN, map bulk motions and turbulence in galaxy clusters, and observe the process of cosmic feedback where black holes inject energy on galactic and intergalactic scales. EPE gives up the high resolution imaging of IXO in return for lightweight, high TRL foil mirrors which will provide >20 times the effective area of ASTRO-H and similar spatial resolution, with a beam sufficient to study point sources and nearby galaxies and clusters. Advances in micro-calorimeters allow improved performance at high rates with twice the energy resolution of ASTRO-H. A lower TRL option would provide 200 times the area of ASTRO-H using a micro-channel plate optic (MCPO) and a deployable optical bench. Both options are in the middle range of RFI missions at between $600M and $1000M. The EPE foil optic has direct heritage to ASTRO-H, allowing robust cost estimates. The spacecraft is entirely off the shelf and introduces no difficult requirements. The mission could be started and launched in this decade to an L2 orbit, with a three-year lifetime and consumables for 5 years. While ASTRO-H will give us the first taste of high-resolution, non-dispersive X-ray spectroscopy, it will be limited to small numbers of objects in many categories. EPE will give us the first statistically significant samples in each of these categories.

Garcia, Michael↗
NASA NTRS2014

Co-Phasing the Large Binocular Telescope:

The Large Binocular Telescope Interferometer is a NASA-funded nulling and imaging instrument designed to coherently combine the two 8.4-m primary mirrors of the LBT for high-sensitivity, high-contrast, and high-resolution infrared imaging (1.5-13 micrometer). PHASECam is LBTI's near-infrared camera used to measure tip-tilt and phase variations between the two AO-corrected apertures and provide high-angular resolution observations. We report on the status of the system and describe its on-sky performance measured during the first semester of 2014. With a spatial resolution equivalent to that of a 22.8-meter telescope and the light-gathering power of single 11.8-meter mirror, the co-phased LBT can be considered to be a forerunner of the next-generation extremely large telescopes (ELT).

LBT↗
NASA NTRS2023

Surface Biology and Geology Imaging Spectrometer: A Case Study to Optimize the Mission Design Using Intrinsic Dimensionality

The information content that can be derived from spectroscopic imagery tends to increase with finer ground sampling distance, finer spectral sampling, more frequent revisit, and higher signal-to-noise ratios (SNRs). However, these parameters are not independent, and it is thus impossible to design a space-borne imaging spectrometer to maximize all of them simultaneously. We present an instrument model and simulation environment that enable us to find the optimal combination of these four mission design parameters, using intrinsic dimensionality (ID) as the metric. ID is the size of the signal subspace – the maximum degrees of freedom when noise can be disregarded – and is a metric that is independent of any one particular algorithm or application area. This study is important for upcoming missions such as NASA's Earth System Observatory mission to study the Earth's Surface Biology and Geology (SBG), which will comprise a visible to shortwave infrared spectrometer in addition to a multi-channel thermal radiometer on a separate platform. When evaluating a desert site and a tropical forested site, we find that spectral resolution drives information content, with a significant drop in normalized ID (15–45% decrease) when simulating 15 nm spectral sampling as opposed to 10 nm spectral sampling. However, there was some variation between sites, with the forested site benefiting from 5 nm spectral sampling, whereas the desert site had poorer results at this resolution, due to the impact on noise. At 10 nm spectral sampling, ground sampling distances in the range 30–50 m provided the optimal balance between spatial resolution and SNR, although more frequent revisit, potentially by combining data from multiple missions, would maximize total information content.

Mission design↗
NASA NTRSDate not supplied

SREDD: Framework to facilitate MLopS related to discovery of commercial satellite data

SREDD or Super Resolution Event Detection Dashboard is a comprehensive data discovery platform designed to facilitate the identification of multiple events. It is equipped to handle data of varying spatial resolutions and from various vendors, acquired by NASA’s Commercial Smallsat Data Acquisition (CSDA) Program, making it a convenient centralized hub for searching event-related information.

Sujit Roy↗
NASA NTRS1977

Silicon vidicon imaging of Jupiter - 4100- to 8300-A absolute reflectivities and limb darkening of spatially resolved regions

Jupiter was observed in six continuum wavelength channels in the region 4100-8300 A, using a silicon vidicon imaging photometer. Spectral reflectivities and high spatial resolution limb-darkening curves for several belts and zones have been extracted from the data. Simple model fits to the data yield information regarding spectral and spatial variations in single-scattering albedos and shape of particle single-scattering phase functions. Belts appear to be more backscattering than zones, particularly in the blue. The data are in moderate agreement with limb-darkening predicted by models derived from the center-to-limb variation in equivalent width of the H2 4-0 S(1) quadrupole line (Cochran, 1976) in the South Tropical Zone, but strongly disagree with the results of such models for the North Equatorial Belt.

Diner, D. J.↗
NASA NTRS1982

High dispersion observations of selected regions in the Orion Nebula

High resolution spectral observations were made of several regions of the Orion Nebula near theta (2) Ori A using the IUE. The positions were selected using a moderate spatial resolution map from a previous low dispersion IUE survery of this section of the nebula. With the SWP and LWR cameras, 28 pectra were obtained of the bright bar, three Taylor-Munch cloudlets, and several surrounding locations. Emission lines of He, C, N, O, Mg, and Si allow a characterization of these cloudlets and of the gas in and around the bar. Small aperture observations provide radial velocity information for the ultraviolet emission of these features. These data show ionization variations from region to region and are suggestive of stellar wind interactions between the cloudlets and theta(2) Ori A.

Boeshaar, G. O.↗
NASA NTRS1991

Aperture synthesis concepts in microwave remote sensing of the earth

The application of aperture synthesis concepts, used for many years in radio astronomy to achieve high image resolution at a reasonable cost, to remote sensing technology is discussed. The electronically scanned thinned array radiometer (ESTAR) is put forward as a viable alternative to improve spatial resolution by an order of magnitude over what is presently achieved by microwave imaging systems that are collecting data from earth orbit. Future developments in airborne sensor technology and potential spacecraft application are described.

Swift, Calvin T.↗