Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A comparison of VLSI architectures for time and transform domain decoding of Reed-Solomon codes

It is well known that the Euclidean algorithm or its equivalent, continued fractions, can be used to find the error locator polynomial needed to decode a Reed-Solomon (RS) code. It is shown that this algorithm can be used for both time and transform domain decoding by replacing its initial conditions with the Forney syndromes and the erasure locator polynomial. By this means both the errata locator polynomial and the errate evaluator polynomial can be obtained with the Euclidean algorithm. With these ideas, both time and transform domain Reed-Solomon decoders for correcting errors and erasures are simplified and compared. As a consequence, the architectures of Reed-Solomon decoders for correcting both errors and erasures can be made more modular, regular, simple, and naturally suitable for VLSI implementation.

Hsu, I. S.↗
NASA NTRS1987

Hemolysis in runners as evidenced by low serum haptoglobin: Implications for preflight monitoring of astronauts

Hematological parameters and serum haptoglobin were examined in 21 male employees of the Kennedy Space Center who were at 3 levels of physical activity: 7 subjects regularly ran more than 40 km (25 miles) per week (Group I); 7 ran 13 to 24 km (8 to 15 miles) per week (II), and 7 were sedentary (III). Blood was drawn on a different day of the week for five weeks. Differences between day of the week, visit number, and activity level were examined. No differences were observed for day of week or visit number; thus mean values for each variable were calculated for each subject. Variables did not differ among groups. However, trends with level of training were observed in some critical variables. Hemoglobin (Hb) and hematocrit (Hct) conformed to a staircase effect with Group I (14.5 gm/dl and 41.3 percent) lower than Group III (15.1 gm/dl and 42.9 percent). Reticulocyte count was higher and haptoglobin levels lower in Group I (1.35% and 75.7 gm/dl) than Group III (.99 percent and 132.9 gm/dl), with haptoglobin for the high mileage Group I in the clinically abnormal range. Since haptoglobin binds free Hb following RBC destruction, these results suggest that intravascular hemolysis occurs in trained male runners. These results may have special meaning for astronauts training before long-duration spaceflights, since the further reduction in red blood cells which is reported to occur during spaceflight could become detrimental to their health and performance.

Owens, Joyce↗
NASA NTRS1987

Octree based automatic meshing from CSG models

Finite element meshes derived automatically from solid models through recursive spatial subdivision schemes (octrees) can be made to inherit the hierarchical structure and the spatial addressability intrinsic to the underlying grid. These two properties, together with the geometric regularity that can also be built into the mesh, make octree based meshes ideally suited for efficient analysis and self-adaptive remeshing and reanalysis. The element decomposition of the octal cells that intersect the boundary of the domain is emphasized. The problem, central to octree based meshing, is solved by combining template mapping and element extraction into a procedure that utilizes both constructive solid geometry and boundary respresentation techniques. Boundary cells that are not intersected by the edge of the domain boundary are easily mapped to predefined element topology. Cells containing edges (and vertices) are first transformed into a planar polyhedron and then triangulated via element extractors. The modeling environments required for the derivation of planar polyhedra and for element extraction are analyzed.

Perucchio, Renato↗
NASA NTRS1987

Geometrical and topological issues in octree based automatic meshing

Finite element meshes derived automatically from solid models through recursive spatial subdivision schemes (octrees) can be made to inherit the hierarchical structure and the spatial addressability intrinsic to the underlying grid. These two properties, together with the geometric regularity that can also be built into the mesh, make octree based meshes ideally suited for efficient analysis and self-adaptive remeshing and reanalysis. The element decomposition of the octal cells that intersect the boundary of the domain is discussed. The problem, central to octree based meshing, is solved by combining template mapping and element extraction into a procedure that utilizes both constructive solid geometry and boundary representation techniques. Boundary cells that are not intersected by the edge of the domain boundary are easily mapped to predefined element topology. Cells containing edges (and vertices) are first transformed into a planar polyhedron and then triangulated via element extractor. The modeling environments required for the derivation of planar polyhedra and for element extraction are analyzed.

Saxena, Mukul↗
NASA NTRS1988

A review of technologies applicable to low-speed flight of high-performance aircraft investigated in the Langley 14- x 22-foot subsonic tunnel

An extensive research program has been underway at the NASA Langley Research Center to define and develop the technologies required for low-speed flight of high-performance aircraft. This 10-year program has placed emphasis on both short takeoff and landing (STOL) and short takeoff and vertical landing (STOVL) operations rather than on regular up and away flight. A series of NASA in-house as well as joint projects have studied various technologies including high lift, vectored thrust, thrust-induced lift, reversed thrust, an alternate method of providing trim and control, and ground effects. These technologies have been investigated on a number of configurations ranging from industry designs for advanced fighter aircraft to generic wing-canard research models. Test conditions have ranged from hover (or static) through transition to wing-borne flight at angles of attack from -5 to 40 deg at representative thrust coefficients.

Paulson, John W., Jr.↗
NASA NTRS1988

Data traffic reduction schemes for sparse Cholesky factorizations

Load distribution schemes are presented which minimize the total data traffic in the Cholesky factorization of dense and sparse, symmetric, positive definite matrices on multiprocessor systems with local and shared memory. The total data traffic in factoring an n x n sparse, symmetric, positive definite matrix representing an n-vertex regular 2-D grid graph using n (sup alpha), alpha is equal to or less than 1, processors are shown to be O(n(sup 1 + alpha/2)). It is O(n(sup 3/2)), when n (sup alpha), alpha is equal to or greater than 1, processors are used. Under the conditions of uniform load distribution, these results are shown to be asymptotically optimal. The schemes allow efficient use of up to O(n) processors before the total data traffic reaches the maximum value of O(n(sup 3/2)). The partitioning employed within the scheme, allows a better utilization of the data accessed from shared memory than those of previously published methods.

Naik, Vijay K.↗
NASA NTRS1987

Evidence for first polymer in Comet Halley: Polyoxymethylene

The RPA2-Positive Ion Cluster Composition Analyzer (PICCA) on the Giotto spacecraft detected 5 mass peaks with regular spacing of 15 amu up to approximately 120 amu. Starting at 45 amu, the peaks decrease in intensity with increasing mass. Within their half-width they are in good agreement with dissociation products of formaldehyde polymer (POM). A production sequence in which cosmic radiation formed POM from water and carbon monoxide on grains that were aggregated into cometesimals is suggested. Other polymers, possibly containing CN, may also exist. Observations suggest that at least some of the H-, C-, and O-containing dust particles detected by the Particle Impact Analyzer (PIA) on board the Giotto spacecraft and its equivalent on the VEGA-1 and -2 spacecraft contain POM. The properties of POM are consistent with many of the unexpected observations in the coma.

Huebner, W. F.↗
NASA NTRS1986

Characterization of precipitates in a niobium-zirconium-carbon alloy

A niobium alloy with 1 percent zirconium and 0.063 percent carbon by weight was investigated in the as-rolled and annealed conditions, and after high-temperature (1350 and 1400 K) exposure with and without an applied stress. In the as-rolled and annealed conditions, large metastable carbides were observed in addition to a regular distribution of small particles. During the high-temperature exposure, the majority of the large carbides were dissolved and a more stable carbide phase formed. This finely dispersed phase had a composition determined to be approximately 70 percent ZrC and approximately 30 percent NbC and showed some evidence of an orientation relationship with the matrix. The precipitates appeared to coarsen slightly after approximately 5000 hr exposure in the presence of an applied stress resulted in a decrease in the size and in the interparticle spacing of the stable precipitates. However, the composition of the precipitate phase and its ability to pin dislocations were not affected by the temperature or stress conditions.

Grobstein, T. L.↗
NASA NTRS1988

Spur gears: Optimal geometry, methods for generation and Tooth Contact Analysis (TCA) program

The contents of this report include the following: (1) development of optimal geometry for crowned spur gears; (2) methods for their generation; and (3) tooth contact analysis (TCA) computer programs for the analysis of meshing and bearing contact on the crowned spur gears. The method developed for synthesis is used for the determination of the optimal geometry for crowned pinion surface and is directed to reduce the sensitivity of the gears to misalignment, localize the bearing contact, and guarantee the favorable shape and low level of the transmission errors. A new method for the generation of the crowned pinion surface has been proposed. This method is based on application of the tool with a surface of revolution that slightly deviates from a regular cone surface. The tool can be used as a grinding wheel or as a shaver. The crowned pinion surface can also be generated by a generating plane whose motion is provided by an automatic grinding machine controlled by a computer. The TCA program simulates the meshing and bearing contact of the misaligned gears. The transmission errors are also determined.

Litvin, Faydor L.↗
NASA NTRS1988

Voice stress analysis

In a study of the validity of eight candidate voice measures (fundamental frequency, amplitude, speech rate, frequency jitter, amplitude shimmer, Psychological Stress Evaluator scores, energy distribution, and the derived measure of the above measures) for determining psychological stress, 17 males age 21 to 35 were subjected to a tracking task on a microcomputer CRT while parameters of vocal production as well as heart rate were measured. Findings confirm those of earlier studies that increases in fundamental frequency, amplitude, and speech rate are found in speakers involved in extreme levels of stress. In addition, it was found that the same changes appear to occur in a regular fashion within a more subtle level of stress that may be characteristic, for example, of routine flying situations. None of the individual speech measures performed as robustly as did heart rate.

Brenner, Malcolm↗
NASA NTRS1988

Mission telemetry system monitor: A real-time knowledge-based system

The Galileo Mission Telemetry System (MTS) has a cluster of computer subsystems configured as a star network. The MTS handles the real-time processing of spacecraft telemetry and ground monitor data. Large volumes of status and fault messages are generated as a result of changes in the system environment. These messages are triggered by the conditions that exist on any one particular subsystem or device. The order of message generation is in time sequence and does not always correlate to the function sequence of active processes. A significant number of messages provide context with varying degrees of uncertainty. As such, highly skilled telemetry controllers are required to regularly go through high volumes of messages generated by the MTS to identify, diagnose, and isolate faults. A knowledge-based system prototype is being developed to monitor the Galileo Mission Telemetry System performance. The system design approach features temporal reasoning, uncertainty management, and intelligent graphic user interfaces.

Mouneimne, Samih A.↗
NASA NTRS1987

Record charging events from Applied Technology Satellite 6

Applied Technology Satellite 6 regularly charged to large negative potentials in sunlight and eclipse in the earth's midnight to dawn region. This geosynchronous satellite normally reached potentials of -100 to -1000 V in sunlight, and potentials of -100 to -10,000 V in eclipse. The largest potential recorded in eclipse for this satellite was -19 kV, in an environment characterized by an electron temperature of 18 keV. The most negative potential recorded in sunlight was -2 kV, at local dawn, while immersed in an 11-keV electron population. These are the most negative potentials reported from the geosynchronous orbit to date for eclipse and sunlight, respectively. The magnitudes of these potentials indicate the need for methods of potential control on satellites at these altitudes, particularly those with shadowed insulating surfaces.

Olsen, R. C.↗
NASA NTRS1987

Nonlinear acoustic wave propagation in atmosphere TLSP - Final report

In this paper a model problem is considered that simulates an atmospheric acoustic wave propagation situation that is nonlinear. The model is derived from the basic Euler equations for the atmospheric flow and from the regular perturbations for the acoustic part. The nonlinear effects are studied by obtaining two successive linear problems in which the second one involves the solution of the first problem. Well-posedness of these problems is discussed and approximations of the radiation boundary conditions that can be used in numerical simulations are presented.

Hariharan, S. I.↗
NASA NTRS1987

Self-pulsing and bichromatic emission in homogeneously broadened bidirectional ring lasers

The effects of saturation-induced Bragg gratings on the mode structure and dynamics of bidirectional homogeneously broadened ring lasers are studied. The grating is viewed as a distributed feedback medium in a ring cavity and modes appropriate to such a structure are used. A Fourier decomposed rate equation model is developed to study the behavior of these modes above threshold. The difference in the properties of these solutions from the modes of an unfilled ring cavity lead to the possibility of bichromatic emission and both regular undamped and irregular damped self-pulsing.

Rabinovich, W. S.↗
NASA NTRS1988

Supersonic combusting flow - A comparison of numerical and experimental results

The flow field of an unconfined coaxial supersonic burner (SSB) was obtained numerically, using a CFD code. The explicit MacCormack algorithm, with point implicit treatment of chemistry source terms, was employed in the CFD code. Combustion of hydrogen and air was simulated by a two-step finite-rate combustion model whereas turbulence was accounted for by a Prandtl mixing length scheme. Boundary conditions and some important features of the numerical scheme were discussed. The qualitative features of the numerical solution were compared with those obtained by regular as well as schlieren photographs. General agreements of the CFD solution and the experimental photographs were observed.

Chitsomboon, T.↗
NASA NTRS1988

The diffusion of stars through phase space

An orbit-averaged Fokker-Planck equation has been derived to study the secular evolution of stellar systems with regular orbits and the heating of stellar disks. It is shown that a population of stars with an initially Maxwellian peculiar-velocity distribution will remain Maxwellian as it diffuses through orbit space only if: (1) a second-order diffusion tensor is proportional to epicycle energy; and (2) the population's velocity dispersion grows as the square root of time. Scattering by ephemeral spiral waves is able to account for the observed kinematics of the solar neighborhood only if the waves have wavelengths in excess of 9 kpc and constantly drifting pattern speeds.

Binney, James↗
NASA NTRS1987

Quantitative use of satellite SAR imagery of sea ice

An automatic technique to obtain ice motion based on maximizing cross-correlation and employing a strategy of nested calculations has been developed and used to obtain displacements of more than 2000 tie-points on a 2 km mesh grid. The mean displacement error is 250 m and is as low as manual data error of 150 m on rigid pieces. The method allows tie-points to be found on a regular grid in a fully automatic fashion. Full resolution data are not needed to maximize the accuracy of displacement measurements, a result which is significant for SAR images, with their large amounts of data.

Fily, M.↗
NASA NTRS1988

A pipeline design of a fast prime factor DFT on a finite field

A conventional prime factor discrete Fourier transform (DFT) algorithm is used to realize a discrete Fourier-like transform on the finite field, GF(q sub n). This algorithm is developed to compute cyclic convolutions of complex numbers and to decode Reed-Solomon codes. Such a pipeline fast prime factor DFT algorithm over GF(q sub n) is regular, simple, expandable, and naturally suitable for VLSI implementation. An example illustrating the pipeline aspect of a 30-point transform over GF(q sub n) is presented.

Truong, T. K.↗