Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Quantitative description of plastic deformation in nanocrystalline Cu: Dislocation glide versus grain boundary sliding

Uniaxial plastic deformation of polycrystalline Cu with grain sizes in the range of 5-20 nm was studied by using molecular dynamics computer simulations. We developed a quantitative analysis of plasticity by using localized slip vectors to separate the contributions of dislocation activity from grain boundary sliding. We conclude that the competition between these two mechanisms depends on strain rate and grain size, with the dislocation activity increasing with grain size but decreasing with increasing strain rate. For samples with a 5 nm grain size, dislocations contribute {approx_equal}50% of the total plastic strain during steady state deformation at a rate of 1x10{sup 8} s{sup -1}, but this fraction decreases to 35% at a rate of 1x10{sup 10} s{sup -1}. When the grain size is increased to 20 nm, dislocations account for 90% of the strain, even at 1x10{sup 10} s{sup -1}. During the initial stages of plastic deformation, grain boundary sliding initially decreases with strain owing to strain-induced relaxation processes within the grain boundaries. The grains also rotate a few degrees during straining to 20%; the rate of rotation (per unit strain) slightly decreases with strain rate. Lastly, we computed the amount of forced atomic mixing during plastic deformation. The mean square separation distance between atom pairs within grain interiors increases with strain at a rate proportional to their distance apart (i.e., the mixing is superdiffusive), but for pair separations greater than the grain size, this rate becomes independent of the separation distance.

36 MATERIALS SCIENCE↗

Quantitative Raman Measurement of the Evolution of the Cooper-pair Density with Doping in Bi2Sr2CaCu2O8+δ Superconductors

We report Raman measurements on Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}} single crystals that allow us to quantitatively evaluate the doping dependence of the density of Cooper pairs in the superconducting state. We show that the drastic loss of Cooper pairs in the antinodal region as the doping level is reduced is concomitant with a deep alteration of the quasiparticles dynamic above T{sub c} and consistent with a pseudogap that competes with superconductivity. Our data also reveal that the overall density of Cooper pairs evolves with doping, distinctly from the superfluid density above the doping level p{sub c} = 0.2.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantitative description of Josephson-like tunneling in {nu}{sub T}=1 quantum Hall bilayers

At total filling factor {nu}{sub T}=1, interlayer phase coherence in quantum Hall bilayers can result in a tunneling anomaly resembling the Josephson effect in the presence of strong fluctuations. The most robust experimental signature of this effect is a strong enhancement of the tunneling conductance at small voltages. The height and width of the conductance peak depend strongly on the area and tunneling amplitude of the samples, applied parallel magnetic field, and temperature. We find that the tunneling experiments are in quantitative agreement with a theory that treats fluctuations due to meron excitations phenomenologically and takes tunneling into account perturbatively. We also discuss the qualitative changes caused by larger tunneling amplitudes, and provide a possible explanation for recently observed critical currents in counterflow geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantitative determination of energy enhanced interlayer transport in pulsed laser deposition of SrTiO3

We present a quantitative analysis of layer-by-layer growth in pulsed laser deposition using homoepitaxy of SrTiO$_3$ as a prototype perovskite. The analysis of time-dependent coverages extracted from single shot surface x-ray diffraction transients shows that pulsed laser deposition consists of two phases that occur before and after crystallization on vastly different time scales. The non-equilibrium processes during and immediately after the arrival of the laser plume represent the primary mechanism for interlayer transport before crystallization that is completed on $\mu$s-range or faster time scales. Interlayer transport slows down dramatically after crystallization because it is driven only by sluggish thermally activated processes. The thermal interlayer transport represent a small fraction of total interlayer transport that decreases with the laser repetition rate. This analysis shows the energetic species that are present only during the plume arrival to be orders of magnitude more effective than thermal processes in promoting interlayer transport that is the key to the ability of pulsed laser deposition to produce sharp interfaces in both homo and heteroepitaxial growth of oxide films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reflection thermal diffuse x-ray scattering for quantitative determination of phonon dispersion relations

Synchrotron reflection x-ray thermal diffuse scattering (TDS) measurements, rather than previously reported transmission TDS, are carried out at room temperature and analyzed using a formalism based upon second-order interatomic force constants and long-range Coulomb interactions to obtain quantitative determinations of MgO phonon dispersion relations (h) over bar omega(j) (q), phonon densities of states g((h) over bar omega), and isochoric temperature-dependent vibrational heat capacities c v (T). We use MgO as a model system for investigating reflection TDS due to its harmonic behavior as well as its mechanical and dynamic stability. Resulting phonon dispersion relations and densities of states are found to be in good agreement with independent reports from inelastic neutron and x-ray scattering experiments. Temperature-dependent isochoric heat capacities c v (T), computed within the harmonic approximation from (h) over bar omega(j) (q) values, increase with temperature from 0.4 x 10 -4 eV/atom K at 100 K to 1.4 x 10 -4 eV/atom K at 200 K and 1.9 x 10 -4 eV/atom K at 300 K, in excellent agreement with isobaric heat capacity values c p (T) between 4 and 300 K. We anticipate that the experimental approach developed here will be valuable for determining vibrational properties of heteroepitaxial thin films since the use of grazing-incidence (θ ≲ θ c where θ c is the density-dependent critical angle) allows selective tuning of x-ray penetration depths to ≲ 10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards a quantitative description of tunneling conductance of superconductors: Application to LiFeAs

Since the discovery of iron-based superconductors, a number of theories have been put forward to explain the qualitative origin of pairing, but there have been few attempts to make quantitative, material-specific comparisons to experimental results. The spin-fluctuation theory of electronic pairing, based on first-principles electronic structure calculations, makes predictions for the superconducting gap. Within the same framework, the surface wave functions may also be calculated, allowing, e.g., for detailed comparisons between theoretical results and measured scanning tunneling topographs and spectra. We present such a comparison between theory and experiment on the Fe-based superconductor LiFeAs. Our results for the homogeneous surface as well as impurity states are presented as a benchmark test of the theory. For the homogeneous system, we argue that the maxima of topographic image intensity may be located at positions above either the As or Li atoms, depending on tip height and the setpoint current of the measurement. We further report the experimental observation of transitions between As- and Li-registered lattices as functions of both tip height and setpoint bias, in agreement with this prediction. Next, we give a detailed comparison between the simulated scanning tunneling microscopy images of transition-metal defects with experiment. Finally, we discuss possible extensions of the current framework to obtain a theory with true predictive power for scanning tunneling microscopy in Fe-based systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Constraining level densities through quantitative correlations with cross-section data

The adopted level densities (LD) for the nuclei produced through different reaction mechanisms significantly impact the accurate calculation of cross sections for the different reaction channels. Many common LD models make simplified assumptions regarding the overall behavior of the total LD and the intrinsic spin and parity distributions of the excited states. However, very few experimental constraints are taken into account in these models: LD at neutron separation energy coming from average spacings of s- and p-wave resonances ( D 0 and D 1 , respectively) whenever they have been previously measured, and the sometimes subjective extrapolation of discrete levels. These, however, constrain the LD only in very specific regions of excitation energy, and for specific spins and parities. This work aims to establish additional experimental constraints on LD through quantitative correlations between cross sections and LD. This allows for fitting and the determination of detailed structures in LD. For this we use the microscopic Hartree-Fock-Bogoliubov (HFB) LD as a starting point as the HFB LD provide a more realistic spin and parity distributions than phenomenological models such as Gilbert-Cameron (GC). We then associate variations predicted by the HFB model with the structure observed in double-differential cross sections at low outgoing neutron energy, a region that is dominated by the LD input. We also use (n, p) on 56 Fe , as an example case where angle-integrated cross sections are extremely sensitive to LD. For comparison purposes we also perform calculations with the GC model. With this approach we are able to perform fits of the LD based on actual experimental data, constraining the model and ensuring its consistency. This approach can be particularly useful in extrapolating the LD to nuclei for which high-excited discrete levels and/or values of D 0 or D 1 are unknown. Finally, it also predicts neutron-induced inelastic γ cross sections that in some cases can differ significantly from more standard phenomenological LD models such as GC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Binary neutron-star mergers with Whisky and SACRA: First quantitative comparison of results from independent general-relativistic hydrodynamics codes

We present the first quantitative comparison of two independent general-relativistic hydrodynamics codes, the whisky code and the sacra code. We compare the output of simulations starting from the same initial data and carried out with the configuration (numerical methods, grid setup, resolution, gauges) which for each code has been found to give consistent and sufficiently accurate results, in particular, in terms of cleanness of gravitational waveforms. We focus on the quantities that should be conserved during the evolution (rest mass, total mass energy, and total angular momentum) and on the gravitational-wave amplitude and frequency. We find that the results produced by the two codes agree at a reasonable level, with variations in the different quantities but always at better than about 10%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantitative law describing market dynamics before and after interest-rate change

We study the behavior of U.S. markets both before and after U.S. Federal Open Market Commission meetings and show that the announcement of a U.S. Federal Reserve rate change causes a financial shock, where the dynamics after the announcement is described by an analog of the Omori earthquake law. We quantify the rate n(t) of aftershocks following an interest-rate change at time T and find power-law decay which scales as n(t-T)approx(t-T){sup -O}MEGA, with OMEGA positive. Surprisingly, we find that the same law describes the rate n{sup '}(|t-T|) of 'preshocks' before the interest-rate change at time T. This study quantitatively relates the size of the market response to the news which caused the shock and uncovers the presence of quantifiable preshocks. We demonstrate that the news associated with interest-rate change is responsible for causing both the anticipation before the announcement and the surprise after the announcement. We estimate the magnitude of financial news using the relative difference between the U.S. Treasury Bill and the Federal Funds effective rate. Our results are consistent with the 'sign effect', in which 'bad news' has a larger impact than 'good news'. Furthermore, we observe significant volatility aftershocks, confirming a 'market under-reaction' that lasts at least one trading day.

58 GEOSCIENCES↗

Quantitative Phase-Field Approach for Simulating Grain Growth in Anisotropic Systems with Arbitrary Inclination and Misorientation Dependence

A phase-field approach for quantitative simulations of grain growth in anisotropic systems is introduced, together with a new methodology to derive appropriate model parameters that reproduce given misorientation and inclination dependent grain boundary energy and mobility in the simulations. The proposed model formulation and parameter choice guarantee a constant diffuse interface width and consequently give high controllability of the accuracy in grain growth simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Machine-Learning X-Ray Absorption Spectra to Quantitative Accuracy

Simulations of excited state properties, such as spectral functions, are often computationally expensive and therefore not suitable for high-throughput modeling. As a proof of principle, here we demonstrate that graph-based neural networks can be used to predict the x-ray absorption near-edge structure spectra of molecules to quantitative accuracy. Specifically, the predicted spectra reproduce nearly all prominent peaks, with 90% of the predicted peak locations within 1 eV of the ground truth. Besides its own utility in spectral analysis and structure inference, our method can be combined with structure search algorithms to enable high-throughput spectrum sampling of the vast material configuration space, which opens up new pathways to material design and discovery.

97 MATHEMATICS AND COMPUTING↗

Quantitative characterization of the contrast mechanisms of ultra-small angle x-ray scattering imaging.

A general treatment of X-ray imaging contrast for ultra-small-angle X-ray scattering (USAXS) imaging is presented; this approach makes use of phase propagation and dynamical diffraction theory to account quantitatively for the intensity distribution at the detector plane. Simulated results from a model system of micrometer-sized spherical SiO{sub 2} particles embedded in a polypropylene matrix show good agreement with experimental measurements. Simulations by means of a separate geometrical ray-tracing method also account for the features in the USAXS images and offer a complementary view of small-angle X-ray scattering as a contrast mechanism. The ray-tracing analysis indicates that refraction, in the form of Porod scattering, and, to a much lesser extent, X-ray reflection account for the USAXS imaging contrast.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative evaluation of statistical errors in small-angle X-ray scattering measurements

A new model is proposed for the measurement errors incurred in typical small-angle X-ray scattering (SAXS) experiments, which takes into account the setup geometry and physics of the measurement process. The model accurately captures the experimentally determined errors from a large range of synchrotron and in-house anode-based measurements. Its most general formulation gives for the variance of the buffer-subtracted SAXS intensity σ 2 ( q ) = [ I ( q ) + const.]/( kq ), where I ( q ) is the scattering intensity as a function of the momentum transfer q ; k and const. are fitting parameters that are characteristic of the experimental setup. The model gives a concrete procedure for calculating realistic measurement errors for simulated SAXS profiles. In addition, the results provide guidelines for optimizing SAXS measurements, which are in line with established procedures for SAXS experiments, and enable a quantitative evaluation of measurement errors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Considerations for quantitative in situ X-ray powder diffraction studies of solid-state reactions

The importance of sample preparation in collecting high-fidelity powder diffraction data suitable for quantitative structure and phase analysis is well established. Such powder diffraction experiments are increasingly being appliedin situ, during reactions, to explore solid-state reactivity. When appliedin situ, X-ray diffraction is widely used to gain insight into the mechanism and kinetics, and to identify dynamic intermediate states. Here, using a model ion-exchange reaction (NaFeO 2 + LiCl → LiFeO 2 + NaCl), we show that sample preparation not only influences the fidelity of powder diffraction analysis but also impacts the observed reaction progress. Specifically, we found that the observed reaction progress can differ by ∼50% depending on the capillary sample preparation. Thus, forin situdiffraction studies of solid-state reactions, packing fraction is an important and previously unrecognized consideration that impacts reproducibility and fidelity of the reaction study.

Chemistry↗

High-speed quantitative X-ray multi-contrast imaging with deep learning based modulated pattern analysis

The advent of X-ray multi-contrast imaging methods, providing absorption, phase, and dark-field images, holds tremendous promise for complementary and non-destructive visualization of inner structures within materials and bio-samples. However, the low efficiency in measuring and analyzing X-ray modulated patterns has hindered their application in high-resolution in situ imaging. In this work, the Enhanced Scanning Pattern-based Imaging Neural Network (ESPINNet) is introduced as a powerful tool for achieving high-speed, high-resolution quantitative imaging. ESPINNet is faster than correlation-based speckle tracking methods such as XSVT and UMPA, and provides a balanced performance in terms of resolution and speed for data collection by using fewer scanning images. In comparison with our previously developed neural network, ESPINNet introduces the capability to generate dark-field images, further enhancing its versatility. By leveraging scanning patterns, ESPINNet significantly improves resolution and measurement precision. Furthermore, its adaptability to various modulation patterns, including those produced by sandpaper, coded masks, or gratings, ensures broad applicability. These features enable real-time 2D and 3D multi-contrast imaging, positioning ESPINNet as a transformative solution for applications in materials science and biomedical research, particularly for high-speed and in situ measurements.

X-ray at-wavelength metrology↗

Quantitative gamma-spectrometry of nuclear material under conditions of limited information about assayed objects

Canberra Industries has developed a specialized software package, Advanced In-Situ Object Counting System (A-ISOCS), which is based on absolute gamma-spectrometric measurements. It is intended for the verification of the quantity of nuclear materials under conditions where measurements are challenged by incomplete information on the properties of assayed objects which are inspected by the International Atomic Energy (IAEA)'s inspectors. A-ISOCS introduces a technique, which is called the automated optimization that allows the users to determine unknown sample parameters as well as the mass and isotopic composition of nuclear materials. The optimization process is carried out by using benchmarks referring the information included within the gamma-ray spectrum of the measured item. For each benchmark, Figure-of-Merit (FOM) is calculated and used to find the most consistent quantitative result (the best solution) corresponded to the minimized FOM. We have evaluated the capabilities and performance of A-ISOCS based on the measurements of uranium standard reference material samples, which have well-known geometry parameters and physical properties. In addition the applicability of the software to field measurements was assessed with an extensive set of gamma-ray spectra from holdup materials collected at uranium bulk handling facilities. This paper summarizes the results of our evaluation activity. (authors)

36 MATERIALS SCIENCE↗

Quantitative Evaluation of Reliability Improvement: Case Study on a Self-healing Distribution System

In this work, we develop a methodology and tool to quantitatively evaluate the reliability of a self-healing system that considers practical distribution system features such as the distributed energy resources, microgrids, and service restoration strategies. Also, this paper addresses various practical issues when being applied to an actual Duke Energy distribution system, including the design of feasible and practical service restoration strategies that are used to identify the customer interruptions after a fault, and the incorporation of the utility’s historical reliability indices that are used to calibrate the failure rate and repair time of distribution system components such as overhead lines and underground cables. This case study demonstrates the effectiveness of the proposed method.

Dong, Jiaojiao↗