Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Comparison of Fuel Cycles for Lead-Lithium and Pure Lithium Liquid Metal Walls in a Magnetized Target Fusion Power Plant

General Fusion (GF) is developing an adaptable, commercial fusion power plant based on magnetized target fusion (MTF). The GF approach involves forming a spherical torus of deuterium-tritium plasma in a large (~4 m diameter) cavity formed in liquid metal, and then collapsing that cavity with an array of pneumatic piston drivers. The liquid metal is constantly flowing through the fusion chamber and out to processing systems where tritium and heat will be extracted using tritium extraction technologies and heat exchangers, respectively. Here, this study focuses on two candidate designs for the liquid metal blanket and first wall material for the General Fusion Magnetized Target Fusion (GF MTF) power plant and assesses their impact on the tritium fuel cycle. The first candidate is the lead lithium eutectic (LLE) and the second candidate is pure lithium (Li). It was found that the main differences between LLE and Li designs are the extraction technologies required to remove tritium from the blanket and the amount of tritium and its distribution within the facility. More than 80% of the in-process tritium inventory for the LLE design is contained in the isotope separation system, while for the Li design, over 60% of the in-process tritium inventory is contained within the blanket material. This is due to significant tritium retention by Li. For the Li blanket, the burden of tritium processing rests on the blanket extraction technology rather than the traditional exhaust processing route. Thus, the blanket extraction technology is a main driver of tritium inventory in the Li system and determines the subsequent interface with the tritium processing plant.

General Fusion↗
DOE OSTI2025

Electric fields and stationary drift flows in the island divertor SOL of Wendelstein 7-X

Abstract In the island divertor scrape-off layer (SOL) of the Wendelstein 7-X stellarator, 2D-resolved Langmuir probe measurements uncover a complex spatial structure of electron temperature, density, and floating potential. Depending on details of magnetic island size and position, significant poloidal gradients and non-monotonic radial profiles are observed. The resulting electric fields imply the presence of sheared stationary drift flows with poloidal velocities of a few km/s, with flow channels as narrow as one cm. Such flows are observed with a gas puff imaging diagnostic in qualitative agreement with the probe results and imply a significant transport channel in the SOL. The 2D distribution of plasma parameters is intricately associated to the unique magnetic structure of the island divertor SOL and highlights the necessity for more accurate magnetic field reconstructions.

Killer, Carsten (ORCID:0000000177473066)↗
DOE OSTI2026

Measurement of the longitudinal flow-plane decorrelation using multiplane cumulants in $\sqrt{s_{NN}}$ = 200 GeV Au+Au, Ru+Ru, and Zr+Zr collisions

Measurements of the variation of anisotropic flow-plane angles (𝛹 𝑛 ) with rapidity, commonly known as the flow-plane decorrelation, provide important insights into the initial conditions of the matter produced in heavy-ion collisions. Here, in this paper, using data collected by the STAR experiment, we report the first measurement of the four-plane correlator observable 𝑇 𝑛 ⁡{𝑏⁢𝑎;𝑑⁢𝑐}=⟨⟨sin⁡[𝑛⁢(𝛹$^𝑏_𝑛$ − 𝛹$^𝑎_𝑛$)]⁢sin⁡[𝑛⁢(𝛹$^𝑑_𝑛$ − 𝛹$^𝑐_𝑛$)]⟩⟩, where superscripts 𝑎, 𝑏, 𝑐, and 𝑑 denote sequential pseudorapidity (𝜂) regions with 𝑎 corresponding to the most backward region, 𝑏 and 𝑐 close to mid-rapidity with 𝜂 𝑏 < 0 and 𝜂 𝑐 > 0, and 𝑑 being the most forward. The measurement is performed for the elliptic and triangular flow (i.e.~𝑛 = 2 and 3) in Au+Au and isobar (Ru+Ru, Zr+Zr) collisions at $\sqrt{s_{NN}}$=200~GeV. The goal of calculating the correlation of the flow-plane angle variations from backward to mid-central, and from mid-central to forward regions, is to probe the systematic variation of flow angle over a wide 𝜂 range. In mid-central collisions (10−30% centrality), we find 𝑇 2 ⁡{𝑏⁢𝑎;𝑑⁢𝑐} =−0.004 ±0.001⁢(s⁢t⁢a⁢t) ±0.002⁢(s⁢y⁢s⁢t) independent of the collision system. Such a small value of 𝑇 2 favors a random-walk'' variation of the flow-plane angles, where the rapidity correlation length is smaller than the entire region under study. These measurements provide new information on the decorrelation patterns in the system and offer a quantitative estimate of possible systematic variations in anisotropic flow angles such astwist’’ between forward and backward regions. This opens new opportunities for understanding the three-dimensional structure and the time evolution of the quark-gluon plasma created in heavy-ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Traces of nonequilibrium effects, initial condition, bulk dynamics, and elementary collisions in the charm observables

Heavy quarks produced in relativistic heavy-ion collisions are known to be sensitive probes of the hot and dense QCD matter they traverse. In this paper we study how their dynamics is affected by the nature of the bulk evolution of the QCD matter, the initial condition of the system, and the treatment of elementary interactions between heavy quarks and the surrounding medium. For the same initial condition and the same quark-gluon plasma (QGP) expansion scenario we discuss the consequences of the assumption of a local equilibrium by comparing the consequences for the nuclear modification factor $R_{AA}$ and the elliptic flows of charm quarks, scrutinizing the different components of the final distribution of charm quarks. For this purpose we employ the parton-hadron-string dynamics (PHSD) model, which is an off-shell microscopic transport approach, as well as the linearized-Boltzmann (LB) scheme obtained by coarse graining the PHSD bulk and assuming local equilibrium for the interactions of the charm quarks with the bulk. The $R_{AA}$ of charm quarks stemming from the later LB approach is also compared to a genuine fluid dynamics evolution initiated by the coarse grained PHSD, which allows us to further assess the consequences of reducing the full $\textit{n}$-body dynamics. We then proceed to a systematic comparison of PHSD (in its LB approximation) with MC@HQ, another transport model for heavy flavors which also relies on the LB approach. In particular, we investigate the consequences for the nuclear modification factor of charm quarks if we vary separately the initial heavy quark distribution function in matter, the expansion dynamics of the QGP, and the elementary interactions of heavy quarks of these models. We find that the results for both models vary significantly depending on the details of the calculation. However, both models achieve very similar predictions for key heavy quark observables for certain combinations of initial condition, bulk evolution, and interactions. In this work, we conclude that this ambiguity limits our ability to determine the different properties of the system based on the current set of observables.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Systematic study of flow vector fluctuations in $\sqrt{S_{NN}}$ = 5.02 TeV Pb-Pb collisions

Measurements of the 𝑝 T -dependent flow vector fluctuations in Pb–Pb collisions at $\sqrt{S_{NN}}$ = 5.02 TeV using azimuthal correlations with the ALICE experiment at the Large Hadron Collider are presented. A four-particle correlation approach [ALICE Collaboration, Phys. Rev. C 107, L051901 (2023)] is used to quantify the effects of flow angle and magnitude fluctuations separately. This paper extends previous studies to additional centrality intervals and provides measurements of the 𝑝 T -dependent flow vector fluctuations at $\sqrt{S_{NN}}$ = 5.02 TeV with two-particle correlations. Significant 𝑝 T -dependent fluctuations of the $\vec{𝑉}$ 2 flow vector in Pb–Pb collisions are found across different centrality ranges, with the largest fluctuations of up to ∼15% being present in the 5% most central collisions. In parallel, no evidence of significant 𝑝 T -dependent fluctuations of $\vec{𝑉}$ 3 or $\vec{𝑉}$ 4 is found. Additionally, evidence of flow angle and magnitude fluctuations is observed with more than 5⁢𝜎 significance in central collisions. These observations in Pb–Pb collisions indicate where the classical picture of hydrodynamic modeling with a common symmetry plane breaks down. This has implications for hard probes at high 𝑝 T , which might be biased by 𝑝 T -dependent flow angle fluctuations of at least 23% in central collisions. Given the presented results, existing theoretical models should be reexamined to improve our understanding of initial conditions, quark–gluon plasma properties, and the dynamic evolution of the created system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Reacceleration of Galactic Cosmic Rays beyond the Knee at the Termination Shock of a Cosmic-Ray-driven Galactic Wind

The origin of cosmic rays (CRs) above the knee in the spectrum is an unsolved problem. We present a wind model in which interstellar gas flows along a nonrotating, expanding flux tube with a changing speed and cross-sectional area. CRs from Galactic sources, such as supernova remnants, which are coupled to the plasma via Alfvén waves, provide the main pressure source for driving this outflow. These CRs are then subject to diffusive shock reacceleration at the Galactic wind termination shock, which is located at a distance ~200 kpc. Some of the highest-energy reaccelerated particles propagate upstream against the wind and can contribute to the petaelectronvolt to exaelectronvolt range of the spectrum. We analyze the conditions under which efficient reacceleration can occur and find that rigidities ~10–40 PV can be obtained and that the termination shock may account for between 10% and 50% of the proton spectrum measured in IceCube/IceTop experiment. In our model, the termination shock is unable to fully explain the CR spectrum in the petaelectronvolt to exaelectronvolt range. The highest-energy particles that escape downstream from our termination shock, and similar shocks surrounding most galaxies, can be further accelerated by intergalactic shock fronts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Turbulence theories and statistical closure approaches

When discussing research in physics and in science more generally, it is common to ascribe equal importance to the three components of the scientific trinity: theoretical, experimental, and computational studies. This review will explore the future of modern turbulence theory by tracing its history, which began in earnest with Kolmogorov’s 1941 analysis of turbulence cascade and inertial range [A.N. Kolmogorov, Dokl. Akad. Nauk SSSR, 30, 299, (1941); 32, 19, (1941)]. The 80th Anniversary of Kolmogorov’s landmark study is a welcome opportunity to survey the achievements and evaluate the future of the theoretical approach of turbulence research. Over the years, turbulence theories have been critically important in laying the foundation of our understanding of the nature of turbulent flows. In particular, the Direct Interaction Approximation (DIA) [R.H. Kraichnan, J. Fluid Mech., 5, 497 (1959)] and its subsequent development, known as the statistical closure approach, can be identified as perhaps the most profound single advancement. The remarkable success of the statistical closure has furnished a platform to study such essential concepts as the energy transfer process and interacting scales, and the roles of the straining and sweeping motions. More recently, the quasi-Lagrangian formulation of V. L’vov & I. Procaccia and Kraichnan’s solvable passive scalar model provided powerful ways to explore another fundamental aspect of turbulent flows, the phenomena of intermittency, and the associated anomalous scaling exponents. In the meantime, the theory of fluid equilibria has been developed to describe the large-scale structures that can emerge from turbulent cascades of two-dimensional and geophysical flows at a later time. And yet, despite all these successes, analytical treatments suffer from mathematical complexities. As a result, the utility of theoretical approaches has been limited to relatively idealized flows. On the other hand, in recent decades, computational abilities and experimental facilities have reached an unprecedented scale. Looking beyond the horizon, the imminent deployment of exascale supercomputers will generate complete datasets of the entire flow field of key benchmark flows, allowing researchers to extract additional measurements concerning fully developed, complex turbulent flow fields far beyond those available from the statistical closure theories. Some other developments that could potentially influence the future course of turbulence theories include the advancement of machine learning, artificial intelligence, and data science; likely disruptions arising from the advent of quantum computation; and the increasingly prominent role of turbulence research in providing more accurate climate scientific data. Finally, turbulence theorists can leverage these developments by asking the right questions and developing advanced, sophisticated frameworks that will be able to predict and correlate vast amounts of data from the other two components of the trinity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Azimuthal anisotropies of charged particles with high transverse momentum in Pb + Pb collisions at $\sqrt{s_{\textrm{NN}}}$ = 5.02 TeV with the ATLAS detector

A measurement is presented of elliptic (𝑣 2 ) and triangular (𝑣 3 ) azimuthal anisotropy coefficients for charged particles produced in Pb + Pb collisions at $\sqrt{s_{\textrm{NN}}}$ = 5.02 TeV using a dataset corresponding to an integrated luminosity of 0.44nb −1 collected with the ATLAS detector at the LHC in 2018. The values of 𝑣 2 and 𝑣 3 are measured for charged particles over a wide range of transverse momentum (𝑝 T ), 1–400 GeV, and Pb + Pb collision centrality, 0–60%, using the scalar-product and multiparticle cumulant methods. These methods are sensitive to event-by-event fluctuations and nonflow effects in the measurements of azimuthal anisotropies. Positive values of 𝑣 2 are observed up to a 𝑝 T of approximately 100 GeV from both methods across all centrality intervals. Positive values of 𝑣 3 are observed up to approximately 25 GeV using both methods, though the application of the three-subevent technique to the multiparticle cumulant method leads to significant changes at the highest 𝑝 T . At high 𝑝 T (𝑝 T ⪆ 10 GeV), charged particles are dominantly from jet fragmentation. These jets, and hence the measurements presented here, are sensitive to the path-length dependence of parton energy loss in the quark-gluon plasma produced in Pb + Pb collisions.

Collective flow↗
DOE OSTI2026

Integrating Flow Imaging Analysis and Single-Particle ICP-TOFMS for Comprehensive Micro- and Nanoplastic Characterization

Flow imaging analysis (FIA), provides composition-agnostic morphological characterization. These measurements of particle size and shape are valuable to mass-based analysis, such as single particle inductively coupled plasma time-of-flight mass spectrometry (sp-ICP-TOFMS), which provides quantitative data on elements within particles. Using these two methods together enables informed use of geometric assumptions required by sp-ICP-TOFMS, as particle mass is typically converted to a particle diameter using assumed-spherical geometry. To validate this concept, parallel measurements to determine particle diameters were performed by FIA and sp-ICP-TOFMS on four particle suspensions: 300 nm polystyrene Eu-doped nanoparticles, 1 μm Fe-rich beads, 3 μm four element calibration polystyrene beads and 5 μm polystyrene beads. The Fe-particles obtained the highest percent difference from the manufacturer’s nominal diameter, as the mean diameter obtained by FIA was overestimated by 21% and sp-ICP-TOFMS underestimated the mean diameter by 20.7%. Two types of particles were selected to test the effect of varying the particle number concentrations (PNC) on sizing accuracy, and both methods accurately sized each particle population at the PNC expected. Single particle analysis of carbon has continued to be a popular research topic, with direct applications to environmental pollutants in terms of nano- and micro- plastics. Real-world plastic particles were studied, and FIA’s measured circularity values demonstrated that the particles deviated from spherical geometries, therefore sp-ICP-TOFMS data should be interpreted as mass-based rather than size-based. Combining these techniques enables improved interpretation of particle populations and evaluation of particle sizes.

Szakas, Sarah [ORNL] (ORCID:0000000241332197)↗
DOE OSTI2026

Suppression of ion temperature gradient modes by Alfvén activity above a drive threshold in DIII-D

A recent study demonstrates that the suppression of ion temperature gradient (ITG) modes can occur during the nonlinear evolution of toroidicity-induced Alfvén eigenmodes (TAEs) in the DIII-D tokamak [Du et al., Phys. Rev. Lett. 135, 265101 (2025)]. In that work, ITG was suppressed by the formation of a narrow, TAE-induced shear flow layer, whose shearing rate exceeded the ITG decorrelation rate. Here, the shear flow arises from an imbalance between Reynolds and Maxwell stress forces, as the TAE departs from the conventional shear Alfvén wave polarization. This follow-up paper systematically identifies the plasma conditions required for robust ITG suppression through a series of comparative experiments. The results show that TAEs routinely suppress ITG turbulence in plasmas with higher local safety factor (q), elevated fast-ion beta, and larger populations of fast ions on passing orbits, i.e., conditions consistent with the substantial TAE drive. Database analysis further reveals the existence of a threshold in TAE drive for ITG suppression. That is, once the drive exceeds a critical value within a favorable q window, the system undergoes the nonlinear bifurcation process, characterized by a sharp increase in TAE saturated amplitudes at a nearly fixed fast ion drive, suppression of ITG turbulence, and the formation of an internal thermal transport barrier at the localized radii.

Du, X. D. [General Atomics, San Diego, CA (United ↗
DOE OSTI2023

Performance Comparison of Helium and sCO 2 as Coolants for Modular Finger-Type Divertors

Several studies at the Georgia Institute of Technology have evaluated the thermal and fluids performance of the helium-cooled modular divertor with multiple jets (HEMJ) over the past decade. This finger-type divertor was studied both experimentally at nearly prototypical conditions and numerically at fully prototypical operating conditions using experimentally validated simulations. Recently, supercritical carbon dioxide (sCO 2 ) has been studied as the primary coolant in power cycles and other applications in various systems, in part because CO 2 achieves the high densities typical of supercritical fluids at relatively low temperatures and pressures, with a critical point of (7.38 MPa, 31°C). This density makes it possible to realize very compact and efficient sCO 2 power cycles. The feasibility of sCO 2 as a coolant for plasma-facing components, specifically the divertor, was therefore evaluated as part of the Fusion Energy System Studies design study activities. This work compares the thermal-fluid performance of helium and sCO 2 in the HEMJ divertor geometry using numerical simulations at prototypical conditions: inlet temperatures T i = 600°C to 700°C, pressures p ≈ 10 MPa, and steady-state incident heat fluxes on the tile q″ < 17 MW/m 2 . The performance is quantified here as the maximum heat flux that can be accommodated by the plasma-facing tile, the pumping power fraction, defined as the ratio of the coolant pumping power to the incident thermal power, and the operating stress limits based on ASME pressure vessel criteria. As expected, helium requires lower mass flow rates and pumping power fractions within imposed maximum temperature limits for the HEMJ pressure boundary. However, it also appears that neither helium nor sCO 2 can remove 10 MW/m 2 of incident heat flux while meeting ASME pressure vessel criteria. Finally, the numerical modeling reveals that sCO 2 may remove slightly higher incident heat fluxes than helium due to the imposed stress limits due to the sCO 2 coolant resulting in smaller local temperature gradients, albeit at a considerably higher pumping power fraction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Theory of mean E × B shear in a stochastic magnetic field: ambipolarity breaking and radial current

The mean E $ \times $ B shear in a stochastic magnetic field is calculated, using the radial force balance relation and transport equations. This analysis is relevant to the L → H transition with resonant magnetic perturbations, and special focus is placed upon the physics of non-ambipolar transport and radial current. The key physical process is the flow of fluctuating currents along wandering magnetic fields. The increments in poloidal and toroidal rotation, density and ion pressure are calculated. The radial envelope of the magnetic perturbations inside the plasma defines a new scale ${\ell _{{\text{env}}}}$, which is the characteristic scale of the magnetic fluctuation intensity profile. Here, the net particle outflow due to stochastic magnetic fields is calculated and is determined by the net radial current through the separatrix. Implications for the L → H transition are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Gyrokinetic electrostatic turbulence close to marginality in the Wendelstein 7-X stellarator

The transition from strong (fluidlike) to nearly marginal (Floquet-type) regimes of ion-temperature-gradient (ITG) driven turbulence is studied in the stellarator Wendelstein 7-X by means of numerical simulations. Close to marginality, extended (along magnetic field lines) linearly unstable modes are dominant, even in the presence of kinetic electrons, and provide a drive that results in finite turbulent transport. A total suppression of turbulence above the linear stability threshold of the ITG modes, commonly present in tokamaks and known as the “Dimits shift,” is not observed. We show that this is mostly due to the peculiar radial structure of marginal turbulence, which is more localized than in the fluid case and therefore less likely to be stabilized by shearing flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Origin of Pulsed Radio Emission from Magnetars

Extended periods of radio pulsations have been observed for six magnetars, displaying characteristics different from those of ordinary pulsars. In this Letter, we argue that radio emission is generated in a closed, twisted magnetic flux bundle originating near the magnetic pole and extending beyond 100 km from the magnetar. The electron–positron flow in the twisted bundle has to carry electric current and, at the same time, experiences a strong drag from the radiation field of the magnetar. This combination forces the plasma into a “radiatively locked” state with a sustained two-stream instability, generating radio emission. We demonstrate this mechanism using novel first-principles simulations that follow the plasma behavior by solving the relativistic Vlasov equation with the discontinuous Galerkin method. First, using one-dimensional simulations, we demonstrate how radiative drag induces the two-stream instability, sustaining turbulent electric fields. When extended to two dimensions, the system produces electromagnetic waves, including superluminal modes capable of escaping the magnetosphere. We measure their frequency and emitted power and incorporate the local simulation results into a global magnetospheric model. The model explains key features of the observed radio emission from magnetars: its appearance after an X-ray outburst, wide pulse profiles, luminosities ∼10 30 erg s −1 , and a broad range of frequencies extending up to ∼100 GHz.

Astronomical simulations↗
DOE OSTI2023

Observation of long-radial-range-correlation in turbulence in high-collisionality high-confinement plasmas on DIII-D

Abstract We report on the observation of spatially asymmetric turbulent structures with a long radial correlation length in the core of high-collisionality H -mode plasmas on DIII-D tokamak. These turbulent structures develop from shorter wavelength turbulence and have a radially elongated structure. The envelope of turbulence spans a broad radial range in the mid-radius region, leading to streamer-like transport events. The underlying turbulence is featured by intermittency, long-term memory effect, and the characteristic spectrum of self-organized criticality. The amplitude and the radial scale increase substantially when the shearing rate of the mean flow is reduced below the turbulent scattering rate. The enhanced long-radial-range-correlated (LRRC) transport events are accompanied by apparent degradation of normalized energy confinement time. The emergence of such LRRC transport events may serve as a candidate explanation for the degrading nature of H-mode core plasma confinement at high collisionality on DIII-D tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Fluid modeling of low-temperature plasmas

Fluid models are essential for understanding and predicting low-temperature plasma (LTP) behavior in various scientific and industrial settings. This paper provides an introductory tutorial on fluid modeling of LTPs, covering model formulation, implementation, and computational simulations. The tutorial focuses on five main components of the formulation of LTP fluid models: fluid flow, energy, chemistry, electromagnetism, and material properties, as well as in essential aspects of model implementations, including multiscale phenomena, multiphysics coupling, and numerical convergence. Designed for students and early-career researchers, this work offers a practical foundation for developing and using fluid models, from in-house computational codes to commercial software, bridging fundamental theory with real-world applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A reduced-model (nSOLT) simulation of neutral recycling effects on plasma turbulence in the divertor region of MAST-U

The 2D scrape-off-layer turbulence code (nSOLT), which includes 1D kinetic neutral–plasma interactions, is applied to study effects of neutral recycling on plasma turbulence for parameters illustrative of the MAST-U divertor region. Neutral recycling is modeled by injecting a fraction of the parallel plasma flux to the divertor back into the simulation domain as a source of Franck–Condon-distributed neutrals. Stationary sources, concentrated at the magnetic separatrix, model plasma streaming into the divertor region from the upstream scrape-off-layer and sustain plasma turbulence absent neutral recycling. Starting from one such no-neutrals equilibrium, we initiate recycling in a numerical experiment designed to diagnose and identify the effects of various neutral–plasma interactions on the divertor plasma, divertor turbulence, and plasma exhaust. The onset of recycling triggers an initial burst of enhanced cross field plasma transport that is quelled by ionization cooling and charge–exchange (CX) friction, with growing neutral pressure, leading to a quiescent, turbulence-free state. Diagnosis of this transient burst reveals that (1) the sudden increase in plasma density due to ionization dominates the onset of the burst, (2) electron cooling due to ionization increases collisionality and disconnects blob filaments from the sheath, and (3) CX friction drives tripole polarization of a blob that can dominate the curvature-driven dipole polarization, leading to the stagnation of blob propagation and reduced radial turbulent transport. It is shown that CX friction is negligible compared to sheath physics in determining equilibrium mean flow shearing rates, for parameters considered herein (specifically a short connection length to the divertor target), while it can significantly reduce interchange-instability growth rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Deuterium and tritium anomalous transport in the generalized Hasegawa–Wakatani resistive drift wave turbulence model with finite ion Larmor radius

Anomalous transport of mixed deuterium–tritium plasma in the edge of magnetic fusion reactors is investigated using numerical solutions of resistive drift wave turbulence model equations, including finite Larmor radius effects, that are derived within the generalized Hasegawa–Wakatani framework. The anomalous cross field diffusivities of deuterium and tritium are compared in turbulence regimes with different values of the electron adiabaticity parameter controlling the existence of zonal flow. The dependence of the tritium-to-deuterium diffusivity ratio on the deuterium and tritium densities and the logarithmic density gradients is analyzed, and a scaling relation is obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗