Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orbital order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Mapping magnetized geologic structures from space: The effect of orbital and body parameters

When comparing previous satellite magnetometer missions (such as MAGSAT) with proposed new programs (for example, Geopotential Research Mission, GRM) it is important to quantify the difference in scientific information obtained. The ability to resolve separate magnetic blocks (simulating geological units) is used as a parameter for evaluating the expected geologic information from each mission. The effect of satellite orbital altitude on the ability to resolve two magnetic blocks with varying separations is evaluated and quantified. A systematic, nonlinear, relationship exists between resolution and distance between magnetic blocks as a function of orbital altitude. The proposed GRM would provide an order-of-magnitude greater anomaly resolution than the earlier MAGSAT mission for widely separated bodies. The resolution achieved at any particular altitude varies depending on the location of the bodies and orientation.

Schnetzler, C. C.↗
NASA NTRS1984

Landsat/4/Global Positioning System navigation results

An experimental GPSPAC flown on the Landsat-4 spacecraft was the first spaceborne navigation system to use the NAVSTAR Global Position System (GPS). In order to validate the accuracy and reliability of GPSPAC orbit solutions, definitive Landsat-4 ephemerides, derived from ground based tracking data, were generated and compared with GPSPAC estimates. In addition, Landsat-4 orbital solutions were reconstructed from raw GPS measurement data with a GPSPAC navigation simulator program using different Kalman filter constants. Ephemeris comparisons and simulator results are presented, as well as recommendations for the navigation filter.

Heuberger, H.↗
NASA NTRS1985

Study Proposal for the Possible Use of ISS as an Aerodynamic Facility for Aerospace Applications

In order to determine the correct design parameters for an orbital transfer vehicle (OTV) to be used in conjunction with the envisaged space station system (SSS) it is essential to know the aerodynamic coefficients in the translational flow regime of the Earth's atmosphere at approximately 80 to 200 km. Because of the inherent difficulties relating to the duplication of the abovesaid translational flow regime in a ground based aerodynamic facility, another means of making this determination had to be developed. The proposed solution is the exploitation of the tether satellite system (TSS). By employing it as a spaceborne variable low density wind tunnel, the TSS appears to be a very appealing tool for such gas dynamic research.

Buonjiolno, C.↗
NASA NTRS1985

Maximum mass of objects that constitute unseen disk material

It is suggested that the mass of the individual unseen 'disk things' which furnish unseen mass satisfies an inequality that is based on the demonstrated existence of a large number of wide binary stars in the Galaxy whose projected separations are as large as 0.1 pc. Since these binaries are weakly bound, with orbital velocities of 0.3 km/sec and periods of the order of 1 million years, they can be disrupted by passing stars or other pointlike objects. This implies that the mass of the unseen disk objects, which provide about half the local mass density, must be less than 2 solar masses.

Bahcall, J. N.↗
NASA NTRS1987

Large aperture high accuracy satellite laser tracking

A satellite laser ranging station has been established in order to range both low and high earth-orbiting satellites with a few-mm accuracy; this entails precision pointing of a 15-ton, azimuth-elevation-mounted coude telescope. Because tracking is performed under open loop computer control with no feedback from laser returns, the initial acquisition data and the algorithms for orbit computation must be accurate enough to maintain the satellite within the narrow laser beam width. The system is currently being used to track the LAGEOS and STARLETTE satellites.

Mcgarry, Jan L. F.↗
NASA NTRS1990

Radiation force modeling for the Topex/Poseidon spacecraft

The largest nongravitational forces that will be acting on the Topex satellite will be those due to incident and emitted radiation on the spacecraft surfaces. In order to minimize the effects of these forces on orbit determination, a detailed model is being developed so that they may be accurately predicted. This model requires a precise description of the spacecraft shape and orientation, evaluation of the solar and earth radiation impinging on the surfaces, and a determination of the radiation being emitted from the surfaces as they heat and cool throughout the orbit. The TRASYS software system is used to evaluate the solar and earth radiation striking each surface of the spacecrat. This software has been modified to include an earth radiation model which follows the seasonal variations in albedo and IR radiation. The SINDA software system is then used to determine the transient temperatures of the spacecraft surfaces.

Rosborough, George W.↗
NASA NTRS1991

The in-flight calibration of the Hubble Space Telescope attitude sensors

A detailed review of the in-flight calibration of the Hubble Space Telescope attitude sensors is presented. The review, which covers the period from the April 24, 1990, launch of the spacecraft until the time of this writing (June 1991), describes the calibrations required and accuracies achieved for the four principal attitude sensing systems on the spacecraft: the magnetometers, the fixed head star trackers, the gyroscopes, and the fine guidance sensors (FGS's). In contrast to the other three sensor groups, the Hubble Telecope's FGS's are unique in the precision and performance levels being attempted; spacecraft control and astrometric research at the near-milliarcsecond level are the ultimate goals. FGS calibration accuracies at the 20-milliarcsecond level have already been achieved, and plans for new data acquisitions and reductions that should substantially improve these results are in progress. A summary of the basic attributes of each of the four sensor groups with respect to its usage as an attitude measuring system is presented, followed by a discussion of the calibration items of interest for that group. The calibration items are as follows: for the magnetometers, the corrections for the spacecraft's static and time-varying magnetic fields; for the fixed-head star trackers, their relative alignments and use in performing onboard attitude updates; for the gyroscopes, their scale factors, alignments, and drift rate biases; and for the FGS's, their magnifications, optical distortions, and alignments. The discussion covers the procedures used for each calibration, as well as the order of the calibrations within the general flow of orbital verification activities. It also includes a synopsis of current plans for the eventual calibration of the FGS's to achieve their near-milliarcsecond design accuracy. The conclusions include a table indicating the current and predicted ultimate accuracies for each of the calibration items.

Welter, Gary L.↗
NASA NTRS1993

Heliocentric zoning of the asteroid belt by aluminum-26 heating

Variations in petrology among meteorites attest to a strong heating event early in solar system history, but the heat source has remained unresolved. Aluminum-26 has been considered the most likely high-energy, short-lived radionuclide (half-life 0.72 million years) since the discovery of its decay product - excess Mg-26 - in Allende CAI's. Furthermore, observation of relict Mg-26 in an achondritic clast and in feldspars within ordinary chondrites (3,4) provided strong evidence for live Al-26 in meteorite parent bodies and not just in refractory nebular condensates. The inferred amount of Al-26 is consistent with constraints on the thermal evolution of both ordinary and carbonaceous chondrite parent objects up to a few hundred kilometers in diameter. Meteorites can constrain the early thermal evolution of their parent body locations, provided that a link can be established between asteroid spectrophotometric signature and meteorite class. Asteroid compositions are heliocentrically distributed: objects thought to have experienced high metamorphic or even melting temperatures are located closer to the sun, whereas apparently unaltered or mildly heated asteroids are located farther away. Heliocentric zoning could be the result of Al-26 heating if the initial amount of the radionuclide incorporated into planetesimals was controlled by accretion time, which in turn varies with semimajor axis. Analytic expressions for planetary accretion may be integrated to given the time, tau, required for a planetesimal to grow to a specified radius: tau varies as a(sup n), where n = 1.5 to 3 depending on the assumptions about variations in the surface density of the planetesimal swarm. Numerical simulations of planetesimal accretion at fixed semimajor axis demonstrate that variations in accretion time among small planetesimals can be strongly nonlinear depending on the initial conditions and model assumptions. The general relationship with semimajor axis remains valid because it depends only on the initial orbit properties and distribution of the planesimal swarm. In order to demonstrate the basic dependence of thermal evolution on semimajor axis, we parameterized accretion time across the asteroid belt according to tau varies as a(sup n) and calculated the subsequent thermal history. Objects at a specified semimajor axis were assumed to have the same accretion time, regardless of size. We set the initial Al-26/Al-27 ratio = 6 x 10(exp -5) and treated n and tau(sub 0) at a(sub 0) = 3 AU as adjustable parameters. The thermal model included temperature-dependent properties of ice and rock (CM chondrite analog) and the thermodynamic effects of phase transitions.

Grimm, R. E.↗
NASA NTRS1994

The size and shape of the near-Earth asteroid belt

Evidence was recently reported for the existence of a near-Earth belt of small, Earth-approaching asteroids (SEAs) with diameters less than approximately 50 m. This result was based upon observations made with the Spacewatch Telescope of the University of Arizona during the course of an ongoing search for Earth-approaching asteroids. Using a model to describe the effects of observational bias, it was shown that the orbits observed for SEAs are inconsistent with the orbits of Earth approaches larger than approximately 1 km, and imply a relatively high fraction of Earth-like orbits among the SEAs. In this paper, new observations are included and the bias model is extended in order to quantify the number of SEAs within the near-Earth belt and to further constrain their orbital distribution. The calculation shows that relative to larger Earth approachers. SEAs are deficient in Aten-type orbits for which the semimajor axis is less than 1.0 AU. Instead, nearly all SEAs with aphelia less than 1.4 AU (5 +/- 3% of the total population) have perihelia between 0.9 and 1.1 AU, thus defining a near-Earth belt. Those SEAs with aphelia greater than 1.4 AU, however, have a distribution of orbits that are indistinguishable from the orbits of larger Earth approachers. Taking the near-Earth belt into account does not significantly alter the previously determined enhancement in the number of SEAs the previously determined enhancement in the number of SEAs compared to an extrapolation of the number of larger Earth approachers. At approximately 10 m, the enhancement factor is 40 to within a factor of 2. Also, the RMS impact velocity of SEAs with Earth (17 km/sec) is nearly the same as for larger Earth approachers (18 km/sec).

Rabinowitz, David L.↗
NASA NTRS2000

Managing Risk for Thermal Vacuum Testing of the International Space Station Radiators

The International Space Station (ISS) is designed with large deployable radiator panels that are used to reject waste heat from the habitation modules. Qualification testing of the Heat Rejection System (HRS) radiators was performed using qualification hardware only. As a result of those tests, over 30 design changes were made to the actual flight hardware. Consequently, a system level test of the flight hardware was needed to validate its performance in the final configuration. A full thermal vacuum test was performed on the flight hardware in order to demonstrate its ability to deploy on-orbit. Since there is an increased level of risk associated with testing flight hardware, because of cost and schedule limitations, special risk mitigation procedures were developed and implemented for the test program, This paper introduces the Continuous Risk Management process that was utilized for the ISS HRS test program. Testing was performed in the Space Power Facility at the NASA Glenn Research Center, Plum Brook Station located in Sandusky, Ohio. The radiator system was installed in the 100-foot diameter by 122-foot tall vacuum chamber on a special deployment track. Radiator deployments were performed at several thermal conditions similar to those expected on-orbit using both the primary deployment mechanism and the back-up deployment mechanism. The tests were highly successful and were completed without incident.

Carek, Jerry A.↗
NASA NTRS2001

Short-Arc Analysis of Intersatellite Tracking Data in a Gravity Mapping Mission

A technique for the analysis of low-low intersatellite range-rate data in a gravity mapping mission is explored. The technique is based on standard tracking data analysis for orbit determination but uses a spherical coordinate representation of the 12 epoch state parameters describing the baseline between the two satellites. This representation of the state parameters is exploited to allow the intersatellite range-rate analysis to benefit from information provided by other tracking data types without large simultaneous multiple data type solutions. The technique appears especially valuable for estimating gravity from short arcs (e.g., less than 15 minutes) of data. Gravity recovery simulations which use short arcs are compared with those using arcs a day in length. For a high-inclination orbit, the short-arc analysis recovers low-order gravity coefficients remarkably well, although higher order terms, especially sectorial terms, are less accurate. Simulations suggest that either long or short arcs of GRACE data are likely to improve parts of the geopotential spectrum by orders of magnitude.

Rowlands, David D.↗
NASA NTRS2005

Optimal Design of Integrated Systems Health Management (ISHM) Systems for improving safety in NASA's Exploration Vehicles: A Two-Level Multidisciplinary Design Approach

Integrated Vehicle Health Management (ISHM) systems are used to detect, assess, and isolate functional failures in order to improve safety of space systems such as Orbital Space Planes (OSPs). An ISHM system, as a whole, consists of several subsystems that monitor different components of an OSP including: Spacecraft, Launch Vehicle, Ground Control, and the International Space Station. In this research, therefore, we propose a new methodology to design and optimize ISHM as a distributed system with multiple disciplines (that correspond to different subsystems of OSP safety). A paramount amount of interest has been given in the literature to the multidisciplinary design optimization of problems with such architecture (as will be reviewed in the full paper).

Mehr, Ali Farhang↗
NASA NTRS2009

Orbiter Entry Aerodynamics Flight Testing: STS-119 and STS-125

NASA has performed entry flight testing related to boundary layer transition and turbulent heating environments during 2009. Two projects are involved in implementing the activities and acquiring flight data: 1) Orbiter BLT Flight Experiment during STS-119; and 2) Hypersonic Thermodynamic Infrared Measurements (HYTHIRM) during STS-119 and STS-125. Orbiter BLT FE has implemented tile surface thermocouples in order to provide in-situ data downstream of a fixed geometry tile protuberance. HYTHIRM has developed a framework of mission planning and aircraft based telescopic infrared measurements to provide quantitative surface temperature distributions.

Campbell, Charles H.↗
NASA NTRS2010

Packing Optimization of an Intentionally Stratified Sorbent Bed Containing Dissimilar Media Types

The Fire Cartridge is a packed bed air filter with two different and separate layers of media designed to provide respiratory protection from combustion products after a fire event on the International Space Station (ISS). The first layer of media is a carbon monoxide catalyst made from gold nanoparticles dispersed on iron oxide. The second layer of media is universal carbon, commonly used in commercial respirator filters. Each layer must be optimally packed to effectively remove contaminants from the air. Optimal packing is achieved by vibratory agitations. However, if post-packing movement of the media within the cartridge occurs, mixing of the bed layers, air voids, and channeling could cause preferential air flow and allow contaminants to pass. Several iterations of prototype fire cartridges were developed to reduce post-packing movement of the media within each layer (settling), and to prevent mixing of the two media types. Both types of movement of the media contribute to decreased fire cartridge performance. Each iteration of the fire cartridge design was tested to demonstrate mechanical loads required to cause detrimental movement within the bed, and resulting level of functionality of the media beds after movement was detected. In order to optimally pack each layer, vertical, horizontal, and orbital agitations were tested and a final packed bulk density was calculated for each method. Packed bulk density must be calculated for each lot of catalyst to accommodate variations in particle size, shape, and density. In addition, a physical divider sheet between each type of media was added within the fire cartridge design to further inhibit intermixing of the bed layers.

Kidd, Jessica↗
NASA NTRS2011

Packing Optimization of Sorbent Bed Containing Dissimilar and Irregular Shaped Media

The Fire Cartridge is a packed bed air filter with two different and separate layers of media designed to provide respiratory protection from combustion products after a fire event on the International Space Station (ISS). The first layer of media is a carbon monoxide catalyst and the second layer of media is universal carbon. During development of Fire Cartridge prototypes, the two media beds were noticed to have shifted inside the cartridge. The movement of media within the cartridge can cause mixing of the bed layers, air voids, and channeling, which could cause preferential air flow and allow contaminants to pass through without removal. An optimally packed bed mitigates these risks and ensures effective removal of contaminants from the air. In order to optimally pack each layer, vertical, horizontal, and orbital agitations were investigated and a packed bulk density was calculated for each method. Packed bulk density must be calculated for each media type to accommodate variations in particle size, shape, and density. Additionally, the optimal vibration parameters must be re-evaluated for each batch of media due to variations in particle size distribution between batches. For this application it was determined that orbital vibrations achieve an optimal pack density and the two media layers can be packed by the same method. Another finding was media with a larger size distribution of particles achieve an optimal bed pack easier than media with a smaller size distribution of particles.

Holland, Nathan↗
NASA NTRS2011

EMU Lessons Learned Database

As manned space exploration takes on the task of traveling beyond low Earth orbit, many problems arise that must be solved in order to make the journey possible. One major task is protecting humans from the harsh space environment. The current method of protecting astronauts during Extravehicular Activity (EVA) is through use of the specially designed Extravehicular Mobility Unit (EMU). As more rigorous EVA conditions need to be endured at new destinations, the suit will need to be tailored and improved in order to accommodate the astronaut. The Objective behind the EMU Lessons Learned Database(LLD) is to be able to create a tool which will assist in the development of next-generation EMUs, along with maintenance and improvement of the current EMU, by compiling data from Failure Investigation and Analysis Reports (FIARs) which have information on past suit failures. FIARs use a system of codes that give more information on the aspects of the failure, but if one is unfamiliar with the EMU they will be unable to decipher the information. A goal of the EMU LLD is to not only compile the information, but to present it in a user-friendly, organized, searchable database accessible to all familiarity levels with the EMU; both newcomers and veterans alike. The EMU LLD originally started as an Excel database, which allowed easy navigation and analysis of the data through pivot charts. Creating an entry requires access to the Problem Reporting And Corrective Action database (PRACA), which contains the original FIAR data for all hardware. FIAR data are then transferred to, defined, and formatted in the LLD. Work is being done to create a web-based version of the LLD in order to increase accessibility to all of Johnson Space Center (JSC), which includes converting entries from Excel to the HTML format. FIARs related to the EMU have been completed in the Excel version, and now focus has shifted to expanding FIAR data in the LLD to include EVA tools and support hardware such as the Pistol Grip Tool (PGT) and the Battery Charger Module (BCM), while adding any recently closed EMU-related FIARs.

Matthews, Kevin M., Jr.↗
NASA NTRS2015

Recognizing Sulfate and Phosphate Complexes Adsorbed onto Nanophase Weathering Products on Mars

Nanophase weathering products (i.e., secondary phases that lack long-range atomic order) have been recognized on the martian surface via orbital observations and in-situ measurements from landed missions. Allophane, a poorly crystalline, hydrated aluminosilicate, has been identified at the regional scale in models of thermal-infrared (TIR) data from the Thermal Emission Spectrometer (TES) and at the local scale from visible/near-IR (VNIR) data from the Compact Reconnaissance Impact Spectrometer for Mars (CRISM) instrument and phase calculations of Alpha Particle X-ray Spectrometer (APXS) data of rocks encountered by the Mars Exploration Rovers (MER) Spirit and Opportunity. Nanophase iron oxides (npOx) have been recognized in rocks and soils measured by the Mössbauer Spectrometer on Spirit and Opportunity. Furthermore, analyses of X-ray diffraction data measured by the CheMin instrument onboard the Mars Science Laboratory rover Curiosity indicate rock and soil samples are comprised of approx. 20-50 wt.% X-ray amorphous materials. Chemical measurements by landed missions indicate the presence of sulfur and phosphorus in martian rocks in soils, and APXS data from Gusev crater demonstrate abundances of up to approx. 5 wt.% P2O5 and approx. 30 wt.% SO3. However, the speciation of phosphorus and sulfur is not always evident. On Earth, phosphate and sulfate anions can be chemisorbed onto the surfaces of nanophase weathering products. This process may also occur on Mars, and calculations of the composition of the amorphous component at Gale crater using CheMin mineral models and APXS data show that amorphous material is enriched in volatiles, including S. Here, we examine the ability to detect chemisorbed sulfate and phosphate complexes by analyzing sulfate- and phosphate-adsorbed nanophase weathering products using instruments similar to those on landed and orbital missions.

Rampe, E. B.↗
NASA NTRS2016

A Multi-Center Space Data System Prototype Based on CCSDS Standards

Deep space missions beyond earth orbit will require new methods of data communications in order to compensate for increasing RF propagation delay. The Consultative Committee for Space Data Systems (CCSDS) standard protocols Spacecraft Monitor & Control (SM&C), Asynchronous Message Service (AMS), and Delay/Disruption Tolerant Networking (DTN) provide such a method. The maturity level of this protocol set is, however, insufficient for mission inclusion at this time. This prototype is intended to provide experience which will raise the Technical Readiness Level (TRL) of these protocols..

Rich, Thomas M.↗