Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Is Cs 2 TiBr 6 a promising Pb-free perovskite for solar energy applications?

In a quest for Pb-free perovskites suitable for solar energy applications, Cs 2 TiBr 6 has recently been reported as a promising compound, with appropriate optical and electrical properties as well as high stability under environmental stresses. In this study, we pursue investigation on this compound, demonstrating phase pure Cs 2 TiBr 6 powder formation using solution synthesis and providing complementary experimental characterization and theoretical calculations. An experimental absorption onset of around 2.0 eV is extracted and a weak broad photoluminescence is measured. Density functional theory calculations predict an indirect bandgap, parity-forbidden for both the direct and indirect transitions, which explains the weak and Stokes shifted luminescence. Additionally, we highlight the strong instability of Cs 2 TiBr 6 powder in ambient atmosphere. Therefore, our experimental results supported by theoretical calculations differ from previous results and raise doubts on the suitability of Cs 2 TiBr 6 in its pristine form for solar energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intrinsic emittance properties of an Fe-doped β-Ga 2 O 3 (010) photocathode: Ultracold electron emission at 300 K and the polaron self-energy

Measurements of the spectral emission properties of an iron-doped a β-Ga 2 O 3 (010) photocathode at 300 K reveal the presence of an ultracold contribution to the total electron beam emission with a 6 meV mean transverse energy (MTE) in the 3.5–4.4 eV photon energy range (282–354 nm). This extreme sub-thermal photoemission signal is consistent with direct emission of electrons photoexcited from the Fe dopant states into the low effective mass and positive electron affinity primary conduction band, and it is superimposed on a stronger signal with a larger MTE associated with an (optical)phonon-mediated momentum-resonant Franck–Condon (FC) emission process from a thermally populated and negative electron affinity upper conduction band. For photon energies above 4.5 eV, a transition from a long to a short transport regime is forced by an absorption depth reduction to below 100 nm and both MTE signals exhibit spectral trends consistent with phonon-mediated FC emission if the polaron formation self-energy is included in the temperature of the initial thermalized photoexcited electron distribution.

Angeloni, Louis A. [University of Illinois, Chicag↗

Synthesis and characterization of amorphous Fe2.75Dy-oxide thin films demonstrating room-temperature semiconductor, magnetism, and optical transparency

Recently, amorphous/disordered oxide thin films made from Fe and lanthanides like Dy and Tb have been reported to have a rich set of magnetic, optical, and electronic properties, as well as room-temperature magneto-electric coupling with multiferroics [A. Malasi et al., Sci. Rep. 5, 18157 (2015); H. Taz et al., Sci. Rep. 6, 27869 (2016); and H. Taz et al., Sci. Rep. 10, 1–10 (2020)]. Here, we report the synthesis and detailed characterization of Fe2.75Dy-oxide thin films prepared on various substrates using electron beam co-evaporation. The structure, chemistry, electric, magnetic, and optical properties were studied for the as-prepared and annealed (373 K, in air, 1 h) films of thickness 40 nm. High resolution transmission electron microscopy and electron diffraction study showed that the films were amorphous in both the as-prepared and annealed states. The electron energy-loss spectroscopy studies quantified that metal oxygen stoichiometry changed from Fe2.75Dy-O1.5 to Fe2.75Dy-O1.7 upon annealing. Synchrotron-based x-ray absorption spectroscopy investigation confirmed that the as-prepared films were highly disordered with predominantly metallic Fe and Dy states that became slightly oxidized with annealing in air. The as-prepared amorphous films demonstrated significantly high value of ordinary (∼10 cm2/V s) and anomalous (∼102 cm2/V s) Hall mobility and high electrical conductivity of ∼103 S/cm at room temperature. The cryogenic magnetic property measurement shows two-step magnetization below 200 K, suggesting exchange-spring magnetic interaction. The nature of the field cooled and zero-field cooled curves suggested a spin-glass like transition between 78 K and 80 K, with a characteristic broad peak. The Tauc plot analysis from optical transmission spectra confirms the existence of an optical bandgap of ∼2.42 eV that increased slightly to ∼2.48 eV upon annealing. This rich set of transport, optical, and magnetic properties in these thin films is very exciting and points to potential applicability in low-cost multifunctional devices requiring a combination of transparent, semiconducting, and magnetic responses, such as in spintronics.

Prasad Koirala, Krishna (ORCID:000000029137917X)↗

Synthesis of TiO{sub 2} nanoparticles decorated with gold nanoclusters using pulsed laser ablation in liquid

Amorphous spherical titanium dioxide (TiO{sub 2}) nanoparticles, decorated gold nanoparticles, are shown to be formed under irradiation of commercial TiO{sub 2} nanopowders dispersed in aqueous solution of hydrogen tetrachloroaurate (HAuCl{sub 4}) by second-harmonic nanosecond pulses of an Nd : YAG laser. It is found that these hybrid nanostructures are formed during laser-induced remelting of the initial nanoparticles, stimulated by gold nanoclusters (providing more efficient absorption of visible laser radiation by titanium dioxide) recovered on their surface. The morphology and chemical composition of the newly formed hybrid nanomaterials are investigated in detail by electron microscopy, Raman spectroscopy, and energy-dispersive analysis. It is shown that the average size and number of gold nanoparticles recovered on the TiO{sub 2} surface can be controlled by varying the concentration ratio of the initial nanomaterial and HAuCl{sub 4}. A spectroscopic analysis of light scattering by single hybrid nanoparticles and the results of numerical calculation of the structure of electromagnetic fields near their surface indicate good prospects of these hybrid nanomaterials for various applications in modern optics, optoelectronics, and nanophotonics; for example, for designing chemo- and biosensor platforms and new-generation solar cells. (nanoparticles)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Viewing Optical Processes at the Nanoscale: Combining Scanning Tunneling Microscopy and Optical Spectroscopy

The combination of optical spectroscopy and scanning tunneling microscopy techniques has the potential to yield the unambiguous single-molecule level insight required to fully understand the complex structure–property relationship of emerging material systems. In this Perspective, we highlight the recent progress of single-molecule absorption detected by scanning tunneling microscopy (SMA-STM) to investigate light–matter interactions of supported (nano)particles, quantum dots, and molecular and thin films at the nanoscale. We further show how the SMA-STM technique has been recently extended to expand the classes of materials that can be investigated as well as recent design modifications that enable both time-resolved imaging and tomography. Finally, we hypothesize how these modifications can be further leveraged to advance our current knowledge of light–matter interactions and how the resulting nanoscale insight can be implemented for future material applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D Printing of Inconel 718 with Enhanced Boron Composition as a Novel Solar Absorber Tube Material in the Concentrated Solar Power (CSP) System

The growing demands for elevated efficiency in the solar energy industry led researchers to focus on the development of functional solar absorber tube material in concentrated solar power (CSP) systems, when molten salts are adopted as the heat transfer fluid. In this study, the typical solar absorber tube material, Inconel 718, was enhanced with boron to achieve a higher solar absorptivity in the visible light spectrum. Combined with an additive manufacturing (AM) method, the boron composition exceeded the traditional manufacturing limit of 60 ppm without microstructural defects. The boron-enhanced Inconel 718 exhibited a high solar absorptivity of nearly 90 % while maintaining a high thermal cycle fatigue resistance after thermal cycling treatment between 550°C and 720°C. The boron composition was increased to the manufacturing failure point, and the effects of different boron compositions on mechanical properties, microstructure, and optical properties were studied. The provided microstructure-property map in this study delivers high potentials of functional AM-printed alloy material in CSP applications.

13 HYDRO ENERGY↗

Triple Emission of 5'-( para -R-Phenylene)vinylene-2-(2'-hydroxyphenyl)benzoxazole (PVHBO). Part II: Emission from Anions

This paper is the second part of a study on the effects of a substituted 5'-phenylenevinylene (PV) functionality on the emission properties of 2-(2'-hydroxyphenyl)benzoxazole (HBO)-a dye that is known for excited-state intramolecular proton transfer. The topical compounds are referred to as PVHBOs, each of which is a structural fusion of HBO and a 4-hydroxy-4'-R-stilbene fluorophore that occurs at the hydroxyphenyl moiety. Therefore, the resulting fusion fluorophore manifests the properties of one component or the other, as governed by its interactions with the environment. In part I (the preceding paper), PVHBOs are divided into two groups depending on whether the R substituent is electron-donating/neutral (group I) or electron-withdrawing (group II). The difference in absorption and emission properties between groups I and II is explained based on observations from spectroscopic experiments (both steady-state and time-resolved) and quantum chemical calculations. In the current paper, the same set of tools is applied to characterize the photophysical properties of the conjugate bases-that is, the anions-of PVHBOs. The emission energy of the anion of any group I compound, where the R substituent is either electron-donating or neutral, is situated between those of the neutral enol and keto forms. The emission of the anion of any given group II compound, on the other hand, has a lower energy than both the enol and keto emissions. In this work, the frontier molecular orbitals (i.e., HOMO, LUMO, and LUMO + 1) of a PVHBO localized on either HBO or stilbenoid are impacted by the substituent R and the solvent/additive differently, which leads to the differences in the optical properties of group I and II PVHBOs in both neutral and anion forms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances—Part 3: Optical properties of black and brown carbon emissions

Residential biomass combustion is a source of carbonaceous aerosol. Inefficient combustion, particularly of solid fuels produces large quantities of black and brown carbon (BC and BrC). These particle types are important as they have noted effects on climate forcing and human health. One method of measuring these quantities is by measurement of aerosol light-absorption and scattering, which can be performed using an aethalometer and nephelometer, respectively. These instruments are widely deployed in the study of ambient air and are frequently used in air quality modeling and source apportionment studies. In this study, we will describe (1) a method for measuring primary BC and BrC emissions from two residential log-fired wood hydronic heaters and (2) the BC and BrC emission from these devices over a wide range of operating conditions, such as cold-starts, warm-starts, four different levels of output ranging from 15% to 100% maximum rated output, and periods of repeated cycling. The range in flue-gas BC concentrations, measured using an aethalometer at the 880 nanometer (nm) wavelength, were between 5.09 × 10 2 and 2.24 × 10 4 micrograms per cubic meter (µg/m 3 ) while the scattering coefficient of the flue-gas, measured by a nephelometer at 880 nm, ranged between 2.20 × 10 3 and 8.56 × 10 5 inverse megameters (Mm –1 ). The BrC concentrations, measured using the 370 nm wavelength of an aethalometer, were between 9.10 × 10 1 and 3.56 × 10 4 µg/m 3 . The calculated Angstrom Absorption Exponent (AAE) of the flue-gas aerosol ranged between 1.54 and 3.63. Performing a comparison between the measured BC concentration and an external particulate matter (PM) concentration showed that overall BC makes up roughly a quarter of the PM emitted by either of the two appliances. Further for both appliances, the cold-start and the test phase immediately following it had the highest BC and BrC concentrations, the highest measured scattering coefficient, as well as a low AAE.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Origin of high optical contrast in zinc-zinc oxide electrodeposits for dynamic windows

The control of solar light and heat emission through windows is an important strategy for increasing the energy efficiency of buildings. Reversible Zn electrodeposition has recently emerged as a promising method for constructing electronically tintable robust dynamic windows. In Zn electrodeposits formed from dimethyl sulfoxide (DMSO) electrolytes during device tinting, we observe extraordinary absorption that is in excess of what is predicted by the Beer-Lambert law for a uniform Zn thin film. Here, the charge required to electroplate these films is abnormally low, significantly less than previously reported dynamic windows based on reversible metal electrodeposition, which facilitates the construction of large-area devices that switch uniformly. Finite-difference time-domain (FDTD) simulations are used to investigate the origin of this enhanced absorption, which arises from plasmonic effects among the Zn nanoparticles and ZnO dendrites in the film. The dielectric ZnO dendrites promote absorption via slit-like Zn-dielectric-Zn structures that from hybrid surface plasmon resonance at metal walls. Through these investigations, we provide design principles to construct low-charge and high-contrast metal and metal oxide-based dynamic windows.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Linking optical spectra to free charges in donor/acceptor heterojunctions: cross-correlation of transient microwave and optical spectroscopy

The primary photoexcited species in excitonic semiconductors is a bound electron–hole pair, or exciton. An important strategy for producing separated electrons and holes in photoexcited excitonic semiconductors is the use of donor/acceptor heterojunctions, but the degree to which the carriers can escape their mutual Coulomb attraction is still debated for many systems. Here, we employ a combined pump–probe ultrafast transient absorption (TA) spectroscopy and time-resolved microwave conductivity (TRMC) study on a suite of model excitonic heterojunctions consisting of mono-chiral semiconducting single-walled carbon nanotube (s-SWCNT) electron donors and small-molecule electron acceptors. Comparison of the charge-separated state dynamics between TA and TRMC photoconductance reveals a quantitative match over the 0.5 microsecond time scale. Charge separation yields derived from TA allow extraction of s-SWCNT hole mobilities of ca. 1.5 cm 2 V -1 s -1 (at 9 GHz) by TRMC. We find that the correlation between the techniques conclusively demonstrates that photoinduced charge carriers separated across these heterojunctions do not form bound charge transfer states, but instead form free/mobile charge carriers.

36 MATERIALS SCIENCE↗

Optical and photophysical properties of platinum benzoporphyrins with C 2v and D 2h symmetry

Platinum(II) mono- and di-benzoporphyrins carrying either ester or imide peripheral groups have been successfully synthesized. These benzoporphyrins possessing C 2v and D 2h symmetry were investigated using a range of techniques including UV-Vis and phosphorescence spectroscopy, differential pulse voltammetry, and transient absorption spectroscopy covering wide spatial and temporal ranges. Up to three oxidation and three reductions within the accessible potential window of dichlorobenzene were observed. Facile reductions for both mono- and dibenzoporphyrin derivatives, more so with imide peripheral substituents were witnessed. Computational studies were supportive of push-pull type interactions within these molecular systems. Here, the formation of triplet excited states within 5 ps after laser excitation was confirmed by femtosecond transient absorption studies. Nanosecond transient absorption studies coupled with phosphorescence lifetime studies revealed relatively rapid relaxation of the triplet excited states as compared to a controlled platinum porphyrin suggesting push-pull type interactions on a slower time scale.

DFT calculations↗

Limits on X-Ray Polarization at the Core of Centaurus A as Observed with the Imaging X-Ray Polarimetry Explorer

We present measurements of the polarization of X-rays in the 2–8 keV band from the nucleus of the radio galaxy Centaurus A (Cen A), using a 100 ks observation from the Imaging X-ray Polarimetry Explorer (IXPE). Nearly simultaneous observations of Cen A were also taken with the Swift, NuSTAR, and INTEGRAL observatories. No statistically significant degree of polarization is detected with IXPE. These observations have a minimum detectable polarization at 99% confidence (MDP 99 ) of 6.5% using a weighted, spectral model-independent calculation in the 2–8 keV band. The polarization angle ψ is consequently unconstrained. Spectral fitting across three orders of magnitude in X-ray energy (0.3–400 keV) demonstrates that the SED of Cen A is well described by a simple power law with moderate intrinsic absorption (N H ~ 10 23 cm -2 ) and a Fe Kα emission line, although a second unabsorbed power law is required to account for the observed spectrum at energies below 2 keV. This spectrum suggests that the reprocessing material responsible for this emission line is optically thin and distant from the central black hole. Our upper limits on the X-ray polarization are consistent with the predictions of Compton scattering, although the specific seed photon population responsible for the production of the X-rays cannot be identified. The low polarization degree, variability in the core emission, and the relative lack of variability in the Fe Kα emission line support a picture where electrons are accelerated in a region of highly disordered magnetic fields surrounding the innermost jet.

79 ASTRONOMY AND ASTROPHYSICS↗

The Sloan Digital Sky Survey Quasar Catalog: Sixteenth Data Release

We present the final Sloan Digital Sky Survey IV (SDSS-IV) quasar catalog from Data Release 16 of the extended Baryon Oscillation Spectroscopic Survey (eBOSS). This catalog comprises the largest selection of spectroscopically confirmed quasars to date. The full catalog includes two subcatalogs (the current versions are DR16Q_v4 and DR16Q_Superset_v3 at https://data.sdss.org/sas/dr16/eboss/qso/DR16Q/): a "superset" of all SDSS-IV/eBOSS objects targeted as quasars containing 1,440,615 observations and a quasar-only catalog containing 750,414 quasars, including 225,082 new quasars appearing in an SDSS data release for the first time, as well as known quasars from SDSS-I/II/III. We present automated identification and redshift information for these quasars alongside data from visual inspections for 320,161 spectra. Here, the quasar-only catalog is estimated to be 99.8% complete with 0.3%-1.3% contamination. Automated and visual inspection redshifts are supplemented by redshifts derived via principal component analysis and emission lines. We include emission-line redshifts for Hα, Hβ, Mg II, C III], C IV, and Lyα. Identification and key characteristics generated by automated algorithms are presented for 99,856 broad absorption-line quasars and 35,686 damped Lyman alpha quasars. In addition to SDSS photometric data, we also present multiwavelength data for quasars from the Galaxy Evolution Explorer, UKIDSS, the Wide-field Infrared Survey Explorer, FIRST, ROSAT/2RXS, XMM-Newton, and Gaia. Calibrated digital optical spectra for these quasars can be obtained from the SDSS Science Archive Server.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time variability of ultra fast BAL outflows using SALT: C IV equivalent width analysis

We study the time variability (over ≤7.3 yr) of ultra fast outflows (UFOs) detected in a sample of 64 C IV broad absorption line (BAL) quasars (with 80 distinct BAL components) monitored using the Southern African Large Telescope. By comparing the properties of the quasar in our sample with those of a control sample of non-BAL quasars, we show that the distributions of black hole mass are different and the bolometric luminosities and optical photometric variations of UFO BAL quasars are slightly smaller compared to that of non-BAL quasars. The detection fraction of C IV equivalent width (W) variability (∼95 per cent), the fractional variability amplitude $\left(\frac{\Delta W}{W}\right)$ and the fraction of ‘highly variable’ BAL (i.e. $\big|$$\frac{\Delta W}{W}$$\big|$ > 0.67) components (∼33 per cent) are higher in our sample compared to the general BAL population. The scatter in $\frac{\Delta W}{W}$ and the fraction of ‘highly variable’ BALs increase with the time-scale probed. The $\frac{\Delta W}{W}$ distribution is asymmetric at large time scales. We attribute this to the BAL strengthening time-scales being shorter than the weakening time-scales. The BAL variability amplitude correlates strongly with the BAL properties compared to the quasar properties. BALs with low W, high-velocity, shallow profiles, and low-velocity width tend to show more variability. When multiple BAL components are present, a correlated variability is seen between low- and high-velocity components with the latter showing a larger amplitude variations. We find an anticorrelation between the fractional variations in the continuum flux and W. While this suggests photoionization induced variability, the scatter in continuum flux is much smaller than that of W.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultrafast terahertz spectroscopy provides insight into charge transfer efficiency and dynamics in artificial photosynthesis

Terahertz (THz) spectroscopy provides a noncontact method to measure the ultrafast dynamics and photoconductivity of mobile carriers in semiconducting materials. This has proven useful in studying artificial photosynthesis devices which use semiconductor photoelectrodes. In this work, we present a brief introduction to optical-pump THz-probe (OPTP) spectroscopy, a technique that provides unique and useful insight into interfacial electron transfer (from the surface-attached dye to the conduction band of the semiconductor) in dye-sensitized photoelectrochemical cells. Compared with more familiar methods like visible transient absorption spectroscopy, OPTP spectroscopy stands out in offering both sub-picosecond time resolution as well as sensitivity to mobile carriers (electrons and holes) in the semiconductor portion of artificial photosynthesis devices. The mobile carriers are crucial to device performance as only they pass to the other half cell to complete the reaction. In order to highlight these advantages and illustrate the types of questions OPTP spectroscopy can address, we discuss three case studies. In the first, OPTP spectroscopy is used to measure the injection rates from a set of six different dyes, revealing the effect of the energetics and lifetimes of the dye excited states on interfacial electron transfer. The subsequent case studies investigate the influence of varying the moieties which bind to the surface (anchors), as well as the moieties that connect the chromophore with these anchors (linkers). OPTP spectroscopy was used to measure the interfacial electron transfer rate as these moieties were varied.

59 BASIC BIOLOGICAL SCIENCES↗

Revealing core-valence interactions in solution with femtosecond X-ray pump X-ray probe spectroscopy

Abstract Femtosecond pump-probe spectroscopy using ultrafast optical and infrared pulses has become an essential tool to discover and understand complex electronic and structural dynamics in solvated molecular, biological, and material systems. Here we report the experimental realization of an ultrafast two-color X-ray pump X-ray probe transient absorption experiment performed in solution. A 10 fs X-ray pump pulse creates a localized excitation by removing a 1 s electron from an Fe atom in solvated ferro- and ferricyanide complexes. Following the ensuing Auger–Meitner cascade, the second X-ray pulse probes the Fe 1 s → 3 p transitions in resultant novel core-excited electronic states. Careful comparison of the experimental spectra with theory, extracts +2 eV shifts in transition energies per valence hole, providing insight into correlated interactions of valence 3 d with 3 p and deeper-lying electrons. Such information is essential for accurate modeling and predictive synthesis of transition metal complexes relevant for applications ranging from catalysis to information storage technology. This study demonstrates the experimental realization of the scientific opportunities possible with the continued development of multicolor multi-pulse X-ray spectroscopy to study electronic correlations in complex condensed phase systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

X-ray-line coincidence photopumping in a potassium-chlorine mixed plasma

Exploiting the multiple long pulse capability and suite of x-ray diagnostics of the Orion laser, we have set out to explore line coincidence photopuming—the enhancement in population of an atomic level brought on by resonant absorption of x rays from a different emitting ion. Unlike previous work, the two ions are in the same plasma and so the experiment is an x-ray analog of the well-known Bowen resonance fluorescence mechanism that operates in astrophysical situations in the optical region. Herein, our measurements have shown enhanced fluorescence in a chlorine plasma, attributable to line coincident photopumping from co-mixed potassium ions. To detect this relatively low signal-to-noise phenomenon, the data from multiple shots are combined, and the statistical method of bootstrapping is used to assign a confidence value to the measured enhancement, resulting in an estimate of the enhancement of 39 ± 18 16 % compared to the null case, where no pumping occurs. The experimental results have been compared to coupled radiation-transport and radiation hydrodynamics simulations using the CRETIN code together with the NYM radiation hydrodynamics model and agreement has been found, with the simulations also predicting modest enhancement.

74 ATOMIC AND MOLECULAR PHYSICS↗

The Low-redshift Lyman Continuum Survey. II. New Insights into LyC Diagnostics

The Lyman continuum (LyC) cannot be observed at the epoch of reionization (z ≳ 6) owing to intergalactic H I absorption. To identify LyC emitters (LCEs) and infer the fraction of escaping LyC, astronomers have developed various indirect diagnostics of LyC escape. Using measurements of the LyC from the Low-redshift Lyman Continuum Survey (LzLCS), we present the first statistical test of these diagnostics. While optical depth indicators based on Lyα, such as peak velocity separation and equivalent width, perform well, we also find that other diagnostics, such as the [O III ]/[O II ] flux ratio and star formation rate surface density, predict whether a galaxy is an LCE. The relationship between these galaxy properties and the fraction of escaping LyC flux suggests that LyC escape depends strongly on H I column density, ionization parameter, and stellar feedback. We find that LCEs occupy a range of stellar masses, metallicities, star formation histories, and ionization parameters, which may indicate episodic and/or different physical causes of LyC escape.

79 ASTRONOMY AND ASTROPHYSICS↗