Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Picosecond laser structuration under high pressures: Observation of boron nitride nanorods

We report on picosecond UV-laser processing of hexagonal boron nitride (BN) at moderately high pressures above 500 bar. The main effect is specific to the ambient gas and laser pulse duration in the ablation regime: when samples are irradiated by 5 or 0.45 ps laser pulses in nitrogen gas environment, multiple nucleation of a new crystalline product-BN nanorods-takes place. This process is triggered on structural defects, which number density strongly decreases upon recrystallization. Nonlinear photon absorption by adsorbed nitrogen molecules is suggested to mediate the nucleation growth. High pressure is responsible for the confinement and strong backscattering of ablation products. A strong surface structuring also appears at longer 150 ps laser irradiation in similar experimental conditions. However, the transformed product in this case is amorphous strongly contaminated by boron suboxides B{sub x}O{sub y}.

36 MATERIALS SCIENCE↗

Thermal stability of nitrogen in nitrided HfSiO{sub 2}/SiO{sub 2}/Si(001) ultrathin films

We report on the stability under rapid thermal annealing (RTA) of the nitrogen depth profile in nitrided HfO{sub 2}/SiO{sub 2}/Si[001] and Hf{sub 0.8}Si{sub 0.2}O{sub 2}/SiO{sub 2}/Si[001] dielectric stacks. High resolution x-ray photoelectron spectroscopy (XPS) data indicate that the chemical component of nitrogen associated with the hafnium layer (binding energy of 396.7 eV) decreases considerably upon RTA. This was accompanied by a corresponding increase in the nitrogen component associated with silicon oxynitride (binding energy of 397.5 eV). A self-consistent analysis of the angle resolved XPS data indicated that the total amount of nitrogen in the film remains constant, suggesting that RTA causes an exchange of nitrogen between the hafnium and silicon layers. Transmission electron microscopy images show crystallization of the hafnium layer upon RTA, which is consistent with the loss of nitrogen. Data from time of flight secondary ion mass spectroscopy were consistent with the change in the nitrogen profile caused by RTA.

36 MATERIALS SCIENCE↗

Band edge optical transitions in dilute-nitride GaNSb

Dilute-nitride GaNSb bulk materials with up to 1.4% nitrogen were grown by molecular beam epitaxy on GaSb substrates. Hall measurements indicate residual hole concentrations of nearly 10{sup 19} cm{sup -3} at room temperature, but a decrease to below 10{sup 16} cm{sup -3} and a hole mobility of 1300 cm{sup 2}/V s at 4.5 K for a sample with 0.6% nitrogen. Photoluminescence (PL) and optical absorption measurements demonstrate a bandgap reduction by up to 300 meV with increasing nitrogen incorporation. The experimental absorption spectra are well fit by a functional dependence corresponding to direct allowed optical transitions, and the PL spectra are also consistent with that interpretation. Room temperature carrier relaxation times in the picosecond range are measured using an ultrafast PL upconversion technique.

36 MATERIALS SCIENCE↗

Strong violet and green-yellow electroluminescence from silicon nitride thin films multiply implanted with Si ions

Strong visible electroluminescence (EL) has been observed from a 30 nm silicon nitride thin film multiply implanted with Si ions and annealed at 1100 deg. C. The EL intensity shows a linear relationship with the current transport in the thin film at lower voltages, but a departure from the linear relationship with a quenching in the EL intensity is observed at higher voltages. The EL spectra show two primary EL bands including the predominant violet band at {approx}3.0 eV (415 nm) and the strong green-yellow band at {approx}2.2 eV (560 nm). Two weak bands including the ultraviolet band at {approx}3.8 eV and the near infrared band at {approx}1.45 eV emerge at high voltages. The evolution of each EL band with the voltage has been examined. The phenomena observed are explained, and the EL mechanisms are discussed.

36 MATERIALS SCIENCE↗

Energy transfer and 1.54 {mu}m emission in amorphous silicon nitride films

Er-doped amorphous silicon nitride films with various Si concentrations (Er:SiN{sub x}) were fabricated by reactive magnetron cosputtering followed by thermal annealing. The effects of Si concentrations and annealing temperatures were investigated in relation to Er emission and excitation processes. Efficient excitation of Er ions was demonstrated within a broad energy spectrum and attributed to disorder-induced localized transitions in amorphous Er:SiN{sub x}. A systematic optimization of the 1.54 {mu}m emission was performed and a fundamental trade-off was discovered between Er excitation and emission efficiency due to excess Si incorporation. These results provide an alternative approach for the engineering of sensitized Si-based light sources and lasers.

36 MATERIALS SCIENCE↗

Influence of growth temperature and scandium concentration on piezoelectric response of scandium aluminum nitride alloy thin films

The authors have investigated the influence of growth temperature and scandium concentration on the piezoelectric response of scandium aluminum nitride (Sc{sub x}Al{sub 1-x}N) films prepared by dual reactive cosputtering. The piezoelectric response strongly depends on the growth temperature and scandium concentration. The piezoelectric response of the films prepared at 400 deg. C gradually increases with increasing scandium concentration. On the other hand, the piezoelectric response of the films prepared at 580 deg. C drastically decreases and increases in the scandium concentration from 30% to 40%. We think that the drastic change of the piezoelectric response is due to the disordered grain growth.

36 MATERIALS SCIENCE↗

Photoluminescence properties of midinfrared dilute nitride InAsN epilayers with/without Sb flux during molecular beam epitaxial growth

We report on the comparative studies of photoluminescence (PL) properties of molecular beam epitaxy grown dilute InAsN epilayers with and without antimony (Sb) flux during the growth. Both samples exhibit strong midinfrared (MIR) emission at room temperature, while the sample with Sb flux has much higher intensity. At low temperatures, these samples exhibit totally different PL features in terms of line width, peak position, intensity, and their dependences on temperature and excitation density. Our results clearly indicate that part of Sb atoms serve as a surfactant that effectively improves the optical quality of MIR dilute nitrides.

36 MATERIALS SCIENCE↗

Titanium nitride: A new Ohmic contact material for n-type CdS

In devices based on CdS, indium is often used to make Ohmic contacts. Since indium is scarce and expensive, suitable replacement materials need to be found. In this work, we show that sputtered titanium nitride forms an Ohmic contact with n-type CdS. The CdS films, deposited with chemical bath deposition, have a hexagonal crystal structure and are polycrystalline, mostly with a (002) texture. The thickness of the films is {approx}600 nm, and the donor density is 1.9 x 10{sup 16} cm{sup -3}. The donor density increases to 1.5 x 10{sup 17} cm{sup -3} upon annealing. The contact resistivity of sputtered TiN on CdS is found to be 4.7 {+-} 0.6 {Omega} cm{sup 2}. This value is sufficiently small to avoid large resistive losses in most CdS device applications. To demonstrate the use of TiN in a CdS device, a Au/CdS/TiN Schottky diode was constructed. The diode has a potential barrier of 0.69 V and an ideality factor of 2.2.

36 MATERIALS SCIENCE↗

Functionalization of cubic boron nitride films with rhodamine B and their fluorescent properties

Fluorophore-functionalized cubic boron nitride (cBN) films grown by chemical vapor deposition were achieved by immobilizing rhodamine B isothiocyanate onto their surfaces. To perform the immobilization, the cBN substrates were modified with amino groups by photochemical reaction between hydrogen-terminated cBN surfaces and allylamine. The surface analysis of hydrogen-terminated cBN films surfaces and after functionalization with x-ray photoelectron spectroscopy verified that rhodamine B was indeed attached to the cBN surfaces with covalent bonding. The rhodamine B-functionalized cBN surfaces showed significant variation in fluorescent spectra and confocal imaging upon the treatment in acidic or basic solutions.

36 MATERIALS SCIENCE↗

Polycrystalline iron nitride films fabricated by reactive facing-target sputtering: Structure, magnetic and electrical transport properties

Structure, magnetic and electrical transport properties of the reactive sputtered iron nitride films fabricated at different substrate temperatures (T{sub s}) and nitrogen flow rates (F{sub N{sub 2}}) were investigated systematically. The single-phase polycrystalline {gamma}'-Fe{sub 4}N film was obtained at F{sub N{sub 2}} = 20 sccm and T{sub s} = 450 deg. C. The films are soft ferromagnetic at room temperature. The electrical resistivity ({rho}) of the films fabricated at different F{sub N{sub 2}} and T{sub s} decreases with the decreasing temperature, showing a metallic behavior. Meanwhile, a variety of magnetoresistance (MR) behaviors were observed depending on the applied magnetic field and measuring temperature. It can be deduced that the complex MR behaviors are dominated by Lorentz force, spin-orbit interaction, and weak localization effect.

36 MATERIALS SCIENCE↗

Excitation wavelength dependence of water-window line emissions from boron-nitride laser-produced plasmas

We investigated the effects of laser excitation wavelength on water-window emission lines of laser-produced boron-nitride plasmas. Plasmas are produced by focusing 1064 nm and harmonically generated 532 and 266 nm radiation from a Nd:YAG laser on BN target in vacuum. Soft x-ray emission lines in the water-window region are recorded using a grazing-incidence spectrograph. Filtered photodiodes are used to obtain complementary data for water-window emission intensity and angular dependence. Spectral emission intensity changes in nitrogen Ly-{alpha} and He-{alpha} are used to show how laser wavelength affects emission. Our results show that the relative intensity of spectral lines is laser wavelength dependent, with the ratio of Ly-{alpha} to He-{alpha} emission intensity decreasing as laser wavelength is shortened. Filtered photodiode measurements of angular dependence showed that 266 and 532 nm laser wavelengths produce uniform emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visible photoluminescence in polycrystalline terbium doped aluminum nitride (Tb:AlN) ceramics with high thermal conductivity

Thermal management continues to be one of the major challenges in the development of high powered light sources such as solid state lasers. In particular, the relatively low thermal conductivity of standard photoluminescent (PL) materials limits the overall power output and/or duty cycle. We present a method based on current activated pressure assisted densification for the fabrication of high thermal conductivity PL materials: rare earth doped polycrystalline bulk aluminum nitride. Specifically, the ceramics are translucent and are doped with Tb{sup 3+}, allowing for emission in the visible. Remarkably, the ceramics have a room temperature thermal conductivity of 94 W/(m K) which is almost seven times higher than that of the state of the art host material, Nd-doped yttrium aluminum garnet. These light emitting properties coupled with very high thermal conductivity should enable the development of a wide variety of more powerful light sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural-dependent thermal conductivity of aluminium nitride produced by reactive direct current magnetron sputtering

This Letter reports the thermal conductivity of aluminium nitride (AlN) thin-films deposited by reactive DC magnetron sputtering on single-crystal silicon substrates (100) with varying plasma and magnetic conditions achieving different crystalline qualities. The thermal conductivity of the films was measured at room temperature with the transient hot-strip technique for film thicknesses ranging from 100 nm to 4000 nm. The thermal conductivity was found to increase with the thickness depending on the synthesis conditions and film microstructure. The conductivity in the bulk region of the films, so-called intrinsic conductivity, and the boundary resistance were in the range [120-210] W m{sup -1} K{sup -1} and [2-30 Multiplication-Sign 10{sup -9}] K m{sup 2} W{sup -1}, respectively, in good agreement with microstructures analysed by x-ray diffraction, high-resolution-scanning-electron-microscopy, and transmission-electron-microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of scandium concentration on power generation figure of merit of scandium aluminum nitride thin films

The authors have investigated the influence of scandium concentration on the power generation figure of merit (FOM) of scandium aluminum nitride (Sc{sub x}Al{sub 1-x}N) films prepared by cosputtering. The power generation FOM strongly depends on the scandium concentration. The FOM of Sc{sub 0.41}Al{sub 0.59}N film was 67 GPa, indicating that the FOM is five times larger than that of AlN. The FOM of Sc{sub 0.41}Al{sub 0.59}N film is higher than those of lead zirconate titanate and Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} films, which is the highest reported for any piezoelectric thin films. The high FOM of Sc{sub 0.41}Al{sub 0.59}N film is due to the high d{sub 31} and the low relative permittivity.

36 MATERIALS SCIENCE↗

Controlled polarity of sputter-deposited aluminum nitride on metals observed by aberration corrected scanning transmission electron microscopy

The polarity determination process of sputter-deposited aluminum nitride (AlN) on metals has been analyzed using aberration corrected atomic resolution scanning transmission electron microscope. Direct growth of c-axis orientated AlN on face centered cubic metals (fcc) (111) with the local epitaxy has been observed, and the polarity was determined at the AlN/metal interface. We found that the AlN polarity can be controlled by the base metal layer: N-polarity AlN grows on Pt(111) while Al-polarity AlN forms on Al(111). Based on these results, the growth mechanism of AlN on metals is discussed.

36 MATERIALS SCIENCE↗

Low temperature plasma-enhanced atomic layer deposition of thin vanadium nitride layers for copper diffusion barriers

Thin vanadium nitride (VN) layers were grown by atomic layer deposition using tetrakis(ethylmethylamino)vanadium and NH{sub 3} plasma at deposition temperatures between 70 Degree-Sign C and 150 Degree-Sign C on silicon substrates and polymer foil. X-ray photoelectron spectroscopy revealed a composition close to stoichiometric VN, while x-ray diffraction showed the {delta}-VN crystal structure. The resistivity was as low as 200 {mu}{Omega} cm for the as deposited films and further reduced to 143 {mu}{Omega} cm and 93 {mu}{Omega} cm by annealing in N{sub 2} and H{sub 2}/He/N{sub 2}, respectively. A 5 nm VN layer proved to be effective as a diffusion barrier for copper up to a temperature of 720 Degree-Sign C.

36 MATERIALS SCIENCE↗

Electron channeling contrast imaging studies of nonpolar nitrides using a scanning electron microscope

Threading dislocations, stacking faults, and associated partial dislocations significantly degrade the optical and electrical properties of materials such as non-polar III-nitride semiconductor thin films. Stacking faults are generally difficult to detect and quantify with existing characterization techniques. We demonstrate the use of electron channeling contrast imaging in the scanning electron microscope to non-destructively reveal basal plane stacking faults terminated by partial dislocations in m-plane GaN and InGaN/GaN multiple quantum well structures grown on {gamma}-LiAlO{sub 2} by metal organic vapor phase epitaxy.

36 MATERIALS SCIENCE↗

Electrical properties of scandium nitride epitaxial films grown on (100) magnesium oxide substrates by molecular beam epitaxy

Scandium nitride (ScN) films were grown on (100) MgO single crystals by a molecular beam epitaxy method. The effects of growth conditions, including [Sc]/[N] ratio, growth temperature, and nitrogen radical state, on the electrical properties of the ScN films were studied. The ScN films comprised many small columnar grains. Hall coefficient measurements confirmed that the ScN films were highly degenerate n-type semiconductors and that the carrier concentration of the ScN films was sensitive to the growth temperature and the nitrogen radical states during the film growth. The carrier concentrations of the ScN films ranged from 10{sup 19}–10{sup 21} cm{sup −3} while the Hall mobilities ranged from 50–130 cm{sup 2}·V{sup −1}·s{sup −1} for undoped films. The temperature-dependent Hall coefficient measurements showed that the carrier concentration is nearly independent of temperature, indicating that the change in resistivity with temperature is explained by a change in the Hall mobility. The temperature-dependence of the Hall mobility was strongly affected by the growth conditions.

36 MATERIALS SCIENCE↗