Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Hybrid Particle-Element Simulation of Impact on Composite Orbital Debris Shields

This report describes the development of new numerical methods and new constitutive models for the simulation of hypervelocity impact effects on spacecraft. The research has included parallel implementation of the numerical methods and material models developed under the project. Validation work has included both one dimensional simulations, for comparison with exact solutions, and three dimensional simulations of published hypervelocity impact experiments. The validated formulations have been applied to simulate impact effects in a velocity and kinetic energy regime outside the capabilities of current experimental methods. The research results presented here allow for the expanded use of numerical simulation, as a complement to experimental work, in future design of spacecraft for hypervelocity impact effects.

Fahrenthold, Eric P.↗

Predictive simulation and experimental confirmation of the onset of instability of explosively driven shells

The detonation of explosives with thin shells can cause the shells to expand to over 200% strain at strain rates on the order of 10{sup 4} s{sup -1} before failure. Experimental data indicate the development and growth of multiple plastic instabilities lead to the formation of failure and fragmentation in the near periodic pattern. Presented are comparisons of the onset of instabilities from simulations and experimental data. At Los Alamos National Laboratory material models have been evolving for several years to simulate high strain-rate behavior. Our models include the effects of shock heating and damage evolutions as well as failure. The current edition of one of our models uses a tabular EOS, the PTW strength model, a modified Gurson yield surface to compute damage evolution, and a Johnson-Cook failure model. Presented are some of the details of these models. An experiment confirmed the temperature discontinuities.

36 MATERIALS SCIENCE↗

Modeling fission product diffusion in TRISO fuel particles with BISON

Diffusion of fission products in intact TRISO particles depends on particle geometry, fission product source rates, time, temperature, and temperature-dependent diffusion coefficients. Simulating this diffusion process requires models for source rates and diffusion coefficients, plus computation of the temperature field if not prescribed. In addition, simulation quality depends on discretization of the geometry, appropriate time stepping, and the accuracy of the solution method. In this paper, we explore the simulation of fission product diffusion in TRISO fuel particles using the finite element method via the fuel performance code Bison. Recent material model development has occurred in Bison for each material present in tri-structural isotropic (TRISO) fuel particles: the buffer, inner pyrolytic carbon, silicon carbide, and outer pyrolytic carbon layers, as well as the fuel kernel. Also, new mesh generation and fission product release fraction capabilities have been added. Diffusion capabilities are shown to converge to the correct solution via formal verification tests. A large number of code benchmarking problems are also given, with good results, showing that Bison’s computed release fractions closely match those of other software tools. Finally, a significant validation effort is detailed in which fission product release, measured as part of the AGR-1 capsule experiments, is compared to Bison outputs. Bison outputs compare very well to the experimental data and to PARFUME results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mesh Generation for Microstructures

A parallel, adaptive overlay grid procedure is proposed for use in generating all-hex meshes for stochastic (SVE) and representative (RVE) volume elements in computational materials modeling. The mesh generation process is outlined including several new advancements such as data filtering to improve mesh quality from voxelated and 3D image sources, improvements to the primal contouring method for constructing material interfaces and pillowing to improve mesh quality at boundaries. We show specific examples in crystal plasticity and syntactic foam modeling that have benefitted from the proposed mesh generation procedure and illustrate results of the procedure with several practical mesh examples.

36 MATERIALS SCIENCE↗

Software Quality Assurance Plan ANSYS LSDYNA Version 2023R1

ANSYS Inc. develops and markets engineering simulation software and services used in the aerospace, automotive, manufacturing, electronics, biomedical, energy, defense, and many other industries. ANSYS is dedicated to engineering simulation and is the world’s leading software provider. ANSYS was founded in 1970 and is headquartered in Canonsburg, Pennsylvania. ANSYS provides an engineering analysis tool combining structural, thermal, computational fluid dynamics, acoustic and electromagnetic simulation capabilities. ANSYS LS-DYNA is the most used explicit simulation program capable of simulating the response of materials to short periods of severe loading. Its many elements, contact formulations, material models, and other controls can be used to simulate complex models with control over all the details of the problem. ANSYS LS-DYNA has a vast array of capabilities to simulate extreme deformation problems using its explicit solver. Engineers can tackle simulations involving material failure and look at how the failure progresses through a part or through a system. Models with large amounts of parts or surfaces interacting with each other are also easily handled, and the interactions and load passing between complex behaviors are modeled accurately. Using computers with higher numbers of CPU cores can drastically reduce solution times. In addition, many consulting firms and hundreds of universities use ANSYS for analysis, research, and educational purposes. ANSYS is recognized worldwide as one of the most widely used and capable programs of its type. ANSYS has successfully passed over 100 customer quality system audits against American Society of Mechanical Engineers (ASME) NQA-1 and 10 CFR Part 50, Appendix B, since the company was founded, over 60 of which have been since 1997. ANSYS has successfully passed over 100 International Organization for Standardization (ISO) 9001 assessments. ANSYS design analysis software is the first created within a quality system with ISO 9001 certification, which is the internationally accepted quality standard. Product development, testing, maintenance, and support processes also meet the US Nuclear Regulatory Commission’s (NRC’s) quality requirements, as they have for nearly four decades. ANSYS staff perform more than 60,000 software verification tests before releasing each new product. ASME NQA-1-2012 (Subpart 2.7 is specific to software) is the industry- and NRC-accepted approach (consensus standard) for meeting 10 CFR Part 50, Appendix B, requirements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A comparison study on peridynamic models using irregular non-uniform spatial discretization

The applicability of peridynamic models to problems with irregular non-uniformly discretized solution domain is critical. In this study, a systematic comparison study on results predicted by eight peridynamic models, including bond-based, ordinary state-based and non-ordinary state-based mechanics and heat conduction models, for three different types of problems, including thermal, mechanical and coupled thermo-mechanical, with irregular spatial discretization are performed. It’s found that for the case of irregular but semi-uniform spatial discretization, all these models yield good predictions compared to analytical local solutions. For the case of irregular and non-uniform spatial discretization, models formulated specifically for this configuration give much better results than the conventional formulations which don’t consider the neighborhood difference among material points in the spatial discretization. As a result for either cases of spatial discretization, the bond-associated correspondence material model predicts the most accurate results.

42 ENGINEERING↗

The AMP (Advanced MultiPhysics) Nuclear Fuel Performance Code

The AMP (Advanced MultiPhysics) Nuclear Fuel Performance code is a new, three-dimensional, multi-physics tool that uses state-of-the-art solution methods and validated nuclear fuel models to simulate the nominal operation and anticipated operational transients of nuclear fuel. The AMP Nuclear Fuel Performance code leverages existing validated material models from traditional fuel performance codes and the Scale/ORIGEN-S spent-fuel characterization code to provide an initial capability that is shown to be sufficiently accurate for a single benchmark problem and anticipated to be accurate for a broad range of problems. The thermomechanics-chemical foundation can be solved in a time-dependent or quasi-static approach with any variation of operator-split or fully-coupled solutions at each time step. The AMP Nuclear Fuel Performance code provides interoperable interfaces to leading computational mathematics tools, which will simplify the integration of the code into existing parallel code suites for reactor simulation or lower-length-scale coupling. A baseline validation of the AMP Nuclear Fuel Performance code has been performed through the modeling of an experiment in the Halden Reactor Project (IFA-432), which is the first validation problem incorporated in the FRAPCON Integral Assessment report.

Clarno, Kevin T↗

Complik: A versatile tool for automatizing the representation of material data in MCNP models - 14412

At the Paul Scherrer Institut, the CASMO/SIMULATE code system is used as reference scheme for core analyses of the Swiss reactors. Besides, Monte Carlo (MC) based neutron transport codes are in parallel being established both for out-of-core applications and full core analyses, in order to provide higher fidelity solutions to problems beyond the modelling capabilities of the standard core modelling methods. In this perspective, a necessity is to be able to conduct the MC calculations at any operating conditions, requiring thus proper initialisation of the thermal-hydraulic feedback as well as at any burnup, prompting the need for a detailed modelling of all material zones in the irradiated fuel assemblies. To tackle the later challenge, the development of the COMPLINK tool, aimed at initialising large-scale MC models of burned core configurations, using as basis upstream 2-D assembly/ 3-D core analyses results, was initiated and is presented in this paper. A main feature is the capability to extend in an automatic manner, a user given MC model in order to represent material data with a higher resolution, keeping track of the location of such materials also within nested repeated structures. This capability prevents the user from the burden of developing specific computational framework for a target application. Since the same functionalities are required to analyse out-of-core spent fuel managements systems, a first verification of COMPLINK is illustrated on the basis of a criticality safety evaluation (CSE) with MCNP6.1 of a Swiss PWR wet storage pool loaded with fresh and burned fuel assemblies. Starting from CASMO-5 depletion calculations at each axial layer of the depleted fuel assemblies and reconstructed based on realistic irradiation histories, COMPLINK is then applied to load the isotopic compositions into the material zones of the corresponding MCNP6.1 assembly models. On this basis, the CSE analyses are conducted with focus on investigating axial and radial modelling effects. All in all, the obtained results are found to be well in line with the impact on CSE expected at the considered burnup levels, providing thus confidence in the correct implementation of the COMPLINK functionalities and confirming its effectiveness as well as efficiency for the initialization of all material zones in large-scale MC models of complex and strongly heterogeneous burned configurations. (authors)

42 ENGINEERING↗

Transient creep‐fatigue crack growth in creep‐brittle materials: Application to Alloy 718

Abstract This study presents incremental finite element computations of creep‐fatigue crack growth in Alloy 718 at in air. Alloy 718 is representative of creep‐brittle materials, in which viscoplastic deformation is restricted near the tip of a growing crack. The computations predict crack growth using a unique combination of an irreversible cohesive zone formulation and a strain gradient viscoplastic material model based on the Kocks–Mecking formulation. Cohesive zone damage parameters are estimated using sustained loading and constant‐amplitude cyclic loading experiments. Computations of crack extension under three different waveforms containing overloads all predict post‐overload retardation. The amount of retardation depends strongly on the overload ratio, consistent with experiments in the literature using similar waveforms. Analysis of the crack‐tip fields demonstrates retardation is associated with unloading in the highly deformed material near the advancing crack tip. Dynamic recovery and geometrically necessary dislocations are shown to significantly influence post‐overload crack extension.

36 MATERIALS SCIENCE↗

Simulations of Criticality Control Overpack Container Compaction at the Waste Isolation Pilot Plant

Criticality Control Overpack (CCO) containers are being considered for the disposal of defense-related nuclear waste at the Waste Isolation Pilot Plant (WIPP). At WIPP, these containers would be placed in underground disposal rooms, which will naturally close and compact the containers closer to one another over several centuries. This report details simulations to predict the final container configuration as an input to nuclear criticality assessments. Each container was discretely modeled, including the plywood and stainless steel pipe inside the 55-gallon drum, in order to capture its complex mechanical behavior. Although these high-fidelity simulations were computationally intensive, several different material models were considered in an attempt to reasonably bound the horizontal and vertical compaction percentages. When exceptionally strong materials were used for the containers, the horizontal and vertical closure respectively stabilized at 43:9 % and 93:7 %. At the other extreme, when the containers completely degraded and the clay seams between the salt layers were glued, the horizontal and vertical closure reached respective final values of 48:6 % and 100 %.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of Additively Manufactured Complex Tools for Autoclave Cure Composites

IACMI Project 4.9, Tooling for Composites with Washout Features Produced by Additive Manufacturing, assembled a team including the industry lead, Ability Composites, NREL and Colorado State University (CSU). Ability Composites had originally expressed interest in alternate methods of producing tooling for composite parts. In follow-up discussions, it became clear that one of the bigger tooling challenges revolved around small production volume composite parts that were tooled on washout material due to the complex geometry. To build an understanding of the potential, both from a technology and a cost perspective, for replacing conventional washout tooling with 3D printed thermoplastic tooling, a number of commercially available dissolvable FDM printing materials were evaluated, leading to tooling representative of commercial articles of interest to Ability Composites. Ultimately, Ability Composites was able to directly compare autoclave processed prepreg composite parts produced on conventional washout tooling to composite parts molded on 3D printed dissolvable tooling produced at CSU. Small, laboratory test specimens were developed to investigate the structural performance of the candidate materials under autoclave processing conditions, which were nominally 121 °C (250 °F) and 345 kPa (50 psi). In addition, several internal structural configurations (infills) were evaluated under autoclave conditions using model materials. The results of these tests indicated that two materials, Stratasys ST 130 and Infinite Materials Solutions Aquasys 180 (AQ 180), were the best candidates, given the specified autoclave processing conditions. ST-130 was slightly more robust than AQ-180; however, the AQ-180 was carried forward as it was dissolvable in water, not requiring the basic solution needed to dissolve ST-130. Based on the preliminary material and 3D printed structures evaluations, larger tools with a truncated square pyramid geometry were created to produce prepreg composite test articles for 3D printed dissolvable tool evaluation under standard autoclave fabrication conditions. Two tools were manufactured using ST-130 and one tool using traditional ceramic washout tooling media. The tools were evaluated for geometric fidelity and surface roughness changes before and after carbon fiber/epoxy prepreg composites were manufactured on the tooling. The autoclave processing did not impact the geometry significantly and was completed at 121 °C and 345 kPa, indicating satisfactory tool performance. The results from surface roughness testing of both the resulting composite and the associated tooling indicated that an adequate surface resulted without the need for a surface sealing step, as was required for the conventional washout tooling. Based on results of the truncated pyramid tests as a basis, ST-130, AQ-120 and AQ-180 materials were carried forward to the tool geometry of interest to Ability Composites. These hollow rectangular bent ducts, which were complex in nature and not extractable after cure, were used to understand the impacts of tool material and thickness. One ST-130 tool was produced as a partially solid part, with an enclosed 40% dense infill region to reduce weight and material use. This was the same approach evaluated in the truncated pyramid portion of the study. This tool was to be envelope vacuum bagged and directly compared to a monolithic tool of conventional washout material. The traditional monolithic ceramic tool was manufactured by Ability composites using CNC-based subtractive methods. An additional five dissolvable polymer tools, manufactured from ST-130, AQ-120, and AQ-180, using a hollow design were 3D printed and used to produce carbon fiber/epoxy composite evaluation articles. These hollow dissolvable tools were expected to be less influenced by the autoclave conditions as the wall was solid and vacuum bagging was inside and outside the tool. This alternative geometry was also evaluated as an option in techno-economic modeling. Print times were reduced from in excess of 3 days to under 30 hours, while surface quality and and tool integrity were substantially improved in the transition from the partially solid tool to the hollow tooling concept. Ability Composites produced autoclave-cured prepreg ducts on each of these tools. The autoclave conditions utilized were more severe than those of the initial trials, reaching temperatures of 160 °C and a pressure of 414 kPa. Under these conditions, the partially solid 3D printed tool with skin and 40% dense infill crushed significantly; however, the thicker ST-130 hollow tool showed good promise, deforming only slightly. The thinner hollow tool walls were unsuccessful as were the other materials. Overall, the hollow tool manufacturing process saved significant amounts of time and material in manufacturing as compared to the solid ducts and produced composite surface quality improvements compared to the traditional washout tooling. The TEM was developed to allow direct comparisons between conventional washout tool manufacturing processes and those developed at CSU. It also allowed for two separate 3D printed tool geometries to be analyzed and compared. In this case, the square bent duct tool geometry was determined to be representative of common washout tools. This geometry was compared with a scaled-up version of it to assess differences in the two manufacturing processes based on tool size. The model was developed to make use of user input in the form of geometry details, process steps, manufacturing parameters, bulk material costs, capital equipment costs, and general costs to calculate overall labor, material, capital equipment, and energy costs per manufactured tool for the conventional and additive manufacturing processes for the two representative geometries. It was also able to estimate step-by-step process times for the manufacturing process and geometries. Based on significant input from Ability Composites and CSU from their knowledge gained from hands-on manufacturing of the 3D printed bent duct tool geometry, costs and process times were calculated for the two manufacturing processes. Results showed that the additive manufacturing techniques developed at CSU can substantially reduce the costs of tool manufacturing by reducing labor times and material usage. This is because additive manufacturing is a relatively hands-off process and allows for the tool design to be optimized to reduce material usage. The disadvantage, however, is that process times for additive manufacturing are significantly longer. The three-dimensional (3D) printing process is slow if tight tolerances are required, but the analysis did show that print times could be reduced with the hollow tool geometry. Also, further advances in additive manufacturing could expedite the process. Costs and process times for the tool washout process were calculated separately. They showed that costs are relatively insignificant when compared to the overall tool manufacturing processes, but with increases in tool size, costs for the conventional manufacturing approach are larger than for additive manufacturing. Again, the washout process for conventional tools is very hands-on, whereas for additively manufactured tools the print medium is dissolved in an automated detergent bath at the sacrifice of process time. The analysis showed that optimizing the additively manufactured tools may also reduce washout times. Overall, Project 4.9 demonstrated that commercially available dissolvable 3D printing materials exist that can be used to produce dissolvable tooling capable of surviving prepreg composites fabrication under autoclave conditions of 121 °C (250 °F) and 345 kPa (50 psi). An alternative hollow dissolvable tool design was developed which was structurally superior to the initial concept and was cost and time effective versus conventional washout tooling. The 3D printed sacrificial tool required no added surface sealing steps prior to composite part layup and cure, offering a significant advantage over the porous conventional washout tooling.

36 MATERIALS SCIENCE↗

Annual Report: Property Improvement in CZT via Modeling and Processing Innovations

The objective of this project is to develop growth models of CZT crystals from the melt using vertical gradient freeze (VGF) or vertical Bridgman growth as a typical process. Further, the project will perform critical experiments including single crystal growth to validate the growth models and to provide detailed data for modeling and simulation. Ideally, the project will develop growth models that will provide, for the first time, choices for optimal CZT single crystal growth from the melt based on model input. The overarching goal that guides this research proposal is to produce large, single crystals of CZT with good yield and reproducible properties. In our view this depends on 1) understanding crystal growth processes, including annealing and cool-down processing, and 2) understanding the role of defects on detector response since it is not possible, yet, to produce defect-free materials. Models of defect structure and formation are addressed. Validated models and experiments on reducing defects in melt-grown crystals are used to guide our understanding of growth processes and in-furnace annealing plus cool-down.

36 MATERIALS SCIENCE↗

Effects of Forming Induced Phase Transformation on Crushing Behavior of TRIP Steel

In this paper, results of finite element crash simulation are presented for a TRIP steel side rail with and without considering the phase transformation during forming operations. A homogeneous phase transformation model is adapted to model the mechanical behavior of the austenite-to-martensite phase. The forming process of TRIP steels is simulated with the implementation of the material model. The distribution and volume fraction of the martensite in TRIP steels may be greatly influenced by various factors during forming process and subsequently contribute to the behavior of the formed TRIP steels during the crushing process. The results indicate that, with the forming induced phase transformation, higher energy absorption of the side rail can be achieved. The phase transformation enhances the strength of the side rail

36 MATERIALS SCIENCE↗

System level permeability modeling of porous hydrogen storage materials.

A permeability model for hydrogen transport in a porous material is successfully applied to both laboratory-scale and vehicle-scale sodium alanate hydrogen storage systems. The use of a Knudsen number dependent relationship for permeability of the material in conjunction with a constant area fraction channeling model is shown to accurately predict hydrogen flow through the reactors. Generally applicable model parameters were obtained by numerically fitting experimental measurements from reactors of different sizes and aspect ratios. The degree of channeling was experimentally determined from the measurements and found to be 2.08% of total cross-sectional area. Use of this constant area channeling model and the Knudsen dependent Young & Todd permeability model allows for accurate prediction of the hydrogen uptake performance of full-scale sodium alanate and similar metal hydride systems.

08 HYDROGEN↗

Hot Deformation Behavior and Processing Maps of As-Cast Hypoeutectic Al-Si-Mg Alloy

The hot deformation behavior of as-cast hypoeutectic Al-Si-Mg alloy has been investigated through hot compression tests at temperatures between 573 and 773 K and the strain rate of 0.001-1 s{sup −1}. A modified Hansel-Spittel constitutive model is proposed, which takes the effect of strain rate on strain hardening into account. The processing maps are established based on the dynamic material model and the Murty criterion. Microstructure observations show that dynamic recovery dominates the dynamic softening behavior, and recrystallized grains are found in the sample tested at 773 K with strain rate of 0.01 and 0.001 s{sup −1}. The size of Si particles decreases by about 64.73% with the effective strain increasing from 0 to 1.2. The optimal hot processing parameters of as-cast hypoeutectic Al-Si-Mg alloy are established based on the processing maps.

36 MATERIALS SCIENCE↗

Unified cohesive zone model (UCZM) for fracturing and fragmenting solids

Here, a Unified Cohesive Zone Model (UCZM), which inherits most of the advantages while overcoming the shortcomings of existing Cohesive Zone Models (CZMs), is proposed. Similar to the traditional extrinsic CZM approach, UCZM dynamically inserts the cohesive elements into the system based on local material states (e.g., stress, strain). However, the transition from continua to discontinua is smoothly achieved, thereby eliminating the “time-discontinuous” issue seen in the extrinsic CZM. Moreover, within the novel UCZM framework, the point of transition from continua to discontinua is controllable through the introduction of crack initialization criteria. As a result, the UCZM allows any material models (e.g., elastic, plastic, damage models) for continuum solids and for discrete fracture behavior to work together. In essence, both an enhanced extrinsic cohesive zone model and an intrinsic cohesive zone model can be represented by the proposed unified model. The proposed UCZM has been verified through different numerical examples. The work demonstrates that the UCZM is a highly effective approach for modeling fracture and fragmentation processes in solids.

42 ENGINEERING↗

Material hardness at strain rates beyond 10 6 s –1 via high velocity microparticle impact indentation

Despite advances in mechanical testing at small scales and testing at high strain rates, studies of mechanical behavior of materials remain largely qualitative in the regimes where these two conditions overlap. In this work, we present an approach based on microparticle impact indentation to determine material hardness at micron scales and at high strain rates. We employ laser ablation to impact ceramic alumina microparticles (as indenter) onto two model materials, namely copper and iron. We use real time measurements of impact and rebound velocities together with post- impact measurements of indentation volume to determine material hardness at strain rates beyond 10 6 s –1 .

36 MATERIALS SCIENCE↗

Marmot V2

MARMOT is a robust numerical tool for mesoscale modeling of fuel performance developed under the NEAMS Fuels technical area to predict the coevolution of microstructure and properties in fuel and cladding materials. MARMOT accomplishes this using the phase field method coupled with finite strain mechanics and heat conduction. MARMOT is based on the open source Multiphysics Object-Oriented Simulation Environment (MOOSE) and solves the coupled partial differential equations defining the physics using the finite element method. MARMOT is being developed in order to facilitate the development of improved materials models for fuel performance, but it is also being developed as a powerful tool in and of itself for the simulation of mesoscale fuel performance.

Aagesen, LarryK.↗