Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

SDU7 Interior Liner Testing & Evaluation

The Saltstone Disposal Unit 7 (SDU7) project requested the Savannah River National Laboratory (SRNL), Materials Science & Engineering (MS&E) organization to evaluate an alternative bromobutyl liner and adhesives for potential use in SDU7 based on applicable ASTM testing standards. SRNL performed similar testing for the liner system used in SDU6. Bonded and non-bonded samples of the alternative liner (Blair Rubber Marflex™ RCHB60HT) were subjected to specific ASTM tests after immersion in two Saltstone leachate simulants, designated S1 and S2, for 1000 hours at 60 °C. Immersion exposures were performed at the Savannah River Ecology Laboratory (SREL). Post-immersion testing involved mechanical property and hardness testing of base material, lap-shear testing of bonded samples and rubber-to-concrete paver interrogation. The liner exhibited an approximate 40% drop in tensile strength and 25% drop in elongation at failure from baseline values after immersion, though final values are comparable to previous SDU6 liner values and are within liner manufacturer property ranges. Overall lap-shear strength behavior of the four adhesives showed a similar pattern, with short-term reduction and subsequent increase in peak load values. However, ranking of adhesives varied with the metric used for comparison. Two of the four adhesives tested (Normac 900 and REMA SC 4000) showed overall better behavior, collectively considering immersion performance, lap-shear data and bonded paver interrogation. Lap-shear samples bonded with the REMA adhesive showed the best combination of final retained bond strength, 6-week average bond strength and bond failure mode. Only one paver (REMA SC4000) was noted to have no defects after immersion. This document details the testing performed and provides conclusions and recommendations. The testing suggests that SDU liner performance is highly dependent upon seam integrity, which collectively depends on a combination of adhesive properties, installation workmanship and inspection/quality control.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Versatile system for ion energy measurements generated by pulsed laser ionization: Insights into electron-ion dynamics

Ion energy distributions generated by pulsed laser interactions with materials are essential for applications ranging from materials science to oncology. Ion energy characterization is particularly important for an emerging mass spectrometry technique called virtual-slit cycloidal mass spectrometry (VS-CMS). The ion energy distribution influences the design and performance of VS-CMS instruments, as well as the efficacy of laser-driven ionization methods in various fields. Several established techniques, including the retarding potential method, time-of-flight (TOF) analysis, and electrostatic energy analyzers, have been employed to measure ion energy distributions. The wide range of ion energies reported highlights the strong dependence of ion energy on laser parameters, target materials, and experimental conditions, as well as the necessity of making independent measurements of the ion energy distribution for specific laser systems and materials. This paper presents the design and characterization of a simple TOF-based apparatus for measuring ion energy distributions from pulsed laser ionization without external fields. This approach minimizes perturbation of electron-ion dynamics and enables simultaneous energy measurements at multiple spatial positions. Here, the apparatus was tested using a nanosecond pulsed Nd:YAG laser operating at 1064 nm, 532 nm, and 266 nm on solid copper sheets at various laser fluences. Simultaneous measurements at different distances provide new insights into ion-electron interactions post-ionization and demonstrate the influence of laser wavelength and fluence on ion energy distributions.

Ion energy↗
DOE OSTI2026

Influence of Disorder on the Electronic Properties and Magnetotransport of Ti 3 C 2 T x Single-Flake Devices

The exploration of MXenes for electronic applications is a rapidly growing field in materials science. However, most research has focused on MXene films, with only a limited number of studies addressing the characterization of single-flake devices. In this work, we investigate the electronic and magnetotransport properties of Ti 3 C 2 T x single-flake devices, exploring the influence of structural defectivity on their transport mechanisms. We show that negative magnetoresistance present at low temperatures in single flake samples arises from weak localization, which we analyze to extract the phase coherence length of single-layer and multi-layer flakes. The study of magnetoresistance for this metallic MXene shows that the material exhibits quantum transport phenomena when intrinsic electronic behavior dominates. Moreover, by increasing the defect density via thermal annealing in ultrahigh vacuum, we uncover and characterize the metal-to-disordered metal transition in Ti 3 C 2 T x , shedding light on new properties and enriching fundamental knowledge about MXenes.

MXenes↗
DOE OSTI2021

Quantum Engineering With Hybrid Magnonic Systems and Materials (Invited Paper)

Quantum technology has made tremendous strides over the past two decades with remarkable advances in materials engineering, circuit design and dynamic operation. In particular, the integration of different quantum modules has benefited from hybrid quantum systems, which provide an important pathway for harnessing the different natural advantages of complementary quantum systems and for engineering new functionalities. This review focuses on the current frontiers with respect to utilizing magnetic excitations or magnons for novel quantum functionality. Magnons are the fundamental excitations of magnetically ordered solid-state materials and provide great tunability and exibility for interacting with various quantum modules for integration in diverse quantum systems. The concomitant rich variety of physics and material selections enable exploration of novel quantum phenomena in materials science and engineering. In addition, the relative ease of generating strong coupling and forming hybrid dynamic systems with other excitations makes hybrid magnonics a unique platform for quantum engineering. We start our discussion with circuit-based hybrid magnonic systems, which are coupled with microwave photons and acoustic phonons. Subsequently, we are focusing on the recent progress of magnon-magnon coupling within confined magnetic systems. Next we highlight new opportunities for understanding the interactions between magnons and nitrogen-vacancy centers for quantum sensing and implementing quantum interconnects. Lastly, we focus on the spin excitations and magnon spectra of novel quantum materials investigated with advanced optical characterization.

42 ENGINEERING↗
DOE OSTI2022

Machine learning molecular dynamics simulations toward exploration of high-temperature properties of nuclear fuel materials: case study of thorium dioxide

Predicting materials properties of nuclear fuel compounds is a challenging task in materials science. Their thermodynamical behaviors around and above the operational temperature are essential for the design of nuclear reactors. However, they are not easy to measure, because the target temperature range is too high to perform various standard experiments safely and accurately. Moreover, theoretical methods such as first-principles calculations also suffer from the computational limitations in calculating thermodynamical properties due to their high calculation-costs and complicated electronic structures stemming from f-orbital occupations of valence electrons in actinide elements. Here, we demonstrate, for the first time, machine-learning molecular-dynamics to theoretically explore high-temperature thermodynamical properties of a nuclear fuel material, thorium dioxide. The target compound satisfies first-principles calculation accuracy because f-electron occupation coincidentally diminishes and the scheme meets sampling sufficiency because it works at the computational cost of classical molecular-dynamics levels. We prepare a set of training data using first-principles molecular dynamics with small number of atoms, which cannot directly evaluate thermodynamical properties but captures essential atomistic dynamics at the high temperature range. Then, we construct a machine-learning molecular-dynamics potential and carry out large-scale molecular-dynamics calculations. Consequently, we successfully access two kinds of thermodynamic phase transitions, namely the melting and the anomalous λ transition induced by large diffusions of oxygen atoms. Furthermore, we quantitatively reproduce various experimental data in the best agreement manner by selecting a density functional scheme known as SCAN. Our results suggest that the present scale-up simulation-scheme using machine-learning techniques opens up a new pathway on theoretical studies of not only nuclear fuel compounds, but also a variety of similar materials that contain both heavy and light elements, like thorium dioxide.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Advances in additive manufacturing, materials, and applications with AI/ML

There is high interest in making digital manufacturing a central facet of the new manufacturing landscape. However, in the materials science world, there is much work and opportunity to realize the full potential of artificial intelligence/machine learning (AI/ML) with regard to the structure–composition–processing–property (SCPP) relationship. For polymers (thermoplastics, thermosets, elastomers) and composites (nanocomposites), the origin of their high performance and even recyclability starts with design and formulation. Processing methods enable more property development based on curing, shape-factor forming, and anisotropic directionality. In subtractive manufacturing, high-performance and engineering polymers can be shaped and milled to very high tolerance and specifications and used as replacements for metals and alloys. In conclusion, this typically relies on digital manufacturing methods but tends to be wasteful in materials.

Lara-Ceniceros, Tania E. [Centro de Investigación ↗
DOE OSTI2023

Towards Lightweight Data Integration Using Multi-Workflow Provenance and Data Observability

Modern large-scale scientific discovery requires multidisciplinary collaboration across diverse computing facilities, including High Performance Computing (HPC) machines and the Edge-to-Cloud continuum. Integrated data analysis plays a crucial role in scientific discovery, especially in the current AI era, by enabling Responsible AI development, FAIR, Reproducibility, and User Steering. However, the heterogeneous nature of science poses challenges such as dealing with multiple supporting tools, cross-facility environments, and efficient HPC execution. Building on data observability, adapter system design, and provenance, we propose MIDA: an approach for lightweight runtime Multi-workflow Integrated Data Analysis. MIDA defines data observability strategies and adaptability methods for various parallel systems and machine learning tools. With observability, it intercepts the dataflows in the background without requiring instrumentation while integrating domain, provenance, and telemetry data at runtime into a unified database ready for user steering queries. We conduct experiments showing end-to-end multi-workflow analysis integrating data from Dask and MLFlow in a real distributed deep learning use case for materials science that runs on multiple environments with up to 276 GPUs in parallel. We show near-zero overhead running up to 100,000 tasks on 1,680 CPU cores on the Summit supercomputer.

Santos Souza, Renan↗
DOE OSTI2020

Biomimetic Rebuilding of Multifunctional Red Blood Cells: Modular Design Using Functional Components

The design and synthesis of artificial materials that mimic the structures, mechanical properties, and ultimately functionalities of biological cells remains a current holy grail of materials science. Here based on a silica cell bio-replication approach, we report the design and construction of synthetic rebuilt red blood cells (RRBCs) that fully mimic the broad properties of native RBCs: size, biconcave shape, deformability, oxygen carrying capacity, long circulation time. Four successive nano-scale processing steps: RBC bioreplication, layer-by-layer polymer deposition, and precision silica etching, followed by RBC ghost membrane vesicles fusion are employed for RRBC construction. A panel of physicochemical analyses including zeta potential measurement, fluorescence microscopy, and antibody-mediated agglutination assay proved the recapitulation of RBC shape, size, and membrane structure. Flow-based deformation studies carried out in a microfluidic blood capillary model confirrned the ability of RRBCs to deform and pass through small slits and reconstitute themselves in a manner comparable to native RBCs. Circulation studies of RRBCs conducted ex-ovo in a chick embryo and in vivo in a mouse model demonstrated the requirement of both deformability and native cell membrane surface to achieve long-term circulation. To confer additional non-native functionalities to RRBCs, we developed modular procedures in which to load functional cargos such as hemoglobin, drugs, magnetic nanoparticles, and ATP biosensors within the RRBC interior to enable various functions, including oxygen delivery, therapeutic drug delivery, magnetic manipulation, and toxin biosensing and detection. Taken together, RRBCs represent a class of long circulating RBC-inspired artificial hybrid materials with a broad range of potential applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Graded magnetic materials

Abstract Graded magnetic materials represent a promising new avenue in modern material science from both fundamental and application points of view. Over the course of the last few years, remarkable results have been obtained in (epitaxial) heterostructures based on thin alloy films featuring diverse compositional depth profiles. As a result of the precise tailoring of such profiles, the exchange coupling, and the corresponding effective or local Curie temperatures can be controlled over tens of nm with an excellent precision. This topical review article reports the most recent advances in this emerging research field. Several aspects are covered, but the primary focus lies in the study of compositional gradients being transferred into depth dependent magnetic states in ferromagnets, while also reviewing other experimental attempts to create exchange graded films and materials in general. We account for the remarkable progress achieved in each sample and composition geometry by reporting the recent developments and by discussing the research highlights obtained by several groups. Finally, we conclude the review article with an outlook on future challenges in this field.

Physics↗
DOE OSTI2021

Efficiency analysis of helium-cooled MAS DNP: case studies of surface-modified nanoparticles and homogeneous small-molecule solutions

Despite the growing number of successful applications of dynamic nuclear polarization (DNP)-enhanced magic-angle spinning (MAS) NMR in structural biology and materials science, the nuclear polarizations achieved by current MAS DNP instrumentation are still considerably lower than the theoretical maximum. Here, the method could be significantly strengthened if experiments were performed at temperatures much lower than those currently widely used (~100 K). Recently, the prospects of helium (He)-cooled MAS DNP have been increased with the instrumental developments in MAS technology that uses cold helium gas for sample cooling. Despite the additional gains in sensitivity that have been observed with He-cooled MAS DNP, the performance of the technique has not been evaluated in the case of surfaces and interfaces that benefit the most from DNP. Herein, we studied the efficiency of DNP at temperatures between ~30 K and ~100 K for organically functionalized silica material and a homogeneous solution of small organic molecules at a magnetic field B 0 = 16.4 T. We recorded the changes in signal enhancement, paramagnet-induced quenching and depolarization effects, DNP build-up rate, and Boltzmann polarization. For these samples, the increases in MAS-induced depolarization and DNP build-up times at around 30 K were not as severe as anticipated. In the case of the surface species, we determined that MAS DNP at 30 K provided ~10 times higher sensitivity than MAS DNP at 90 K, which corresponds to the acceleration of experiments by multiplicative factors of up to 100.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Selected Negative Linear Compressibilities in the Metal–Organic Framework of [Cu(4,4'-bpy) 2 (H 2 O) 2 ]·SiF 6

Negative linear compressibility (NLC) is a rare high-pressure observation that lattice contraction is accompanied by the structural expansion along a specific direction. Generally, this counterintuitive phenomenon only derives from the intrinsic structural characteristics of materials and cannot be tuned by external perturbations. Searching for an effective method to control NLC effect is still a challenge in both chemical and material science. In this work, we successfully discover and select the NLC behaviors in the metal-organic framework (MOF) of [Cu(4,4'-bpy) 2 (H 2 O) 2 ]·SiF 6 (Cu(bpy)·SiF) through controlling the pressure conditions therein. The NLC effect of Cu(bpy)·SiF originates from the wine-rack mechanism that quasi-square grids transfer to rhombic ones with the structural expansion along the diagonal direction at high pressure. Meanwhile, both of the pressure range and magnitude of the NLC responses are enlarged with optimized pressure conditions. This study not only presents the intriguing selected NLC behaviors of a MOF but also proves the effects of pressure conditions on NLC, which offers promising strategies for further design and applications of NLC materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interference Control of Fano Resonances and Dynamical Imaging of an Electron Wave Packet

The Fano line shape, arising from the interference of pathways for the excitation of discrete and continuum states, plays a fundamental role in many branches of physics, chemistry, and materials science. Exciting the resonance with a high harmonic provides naturally a phase delay between the pathways leading to a complex asymmetry parameter. We demonstrate that its amplitude and phase can be controlled on the femtosecond and attosecond time scales, respectively. With our high-energy-resolution (10-meV) experiment, we dynamically image a resonance-enhanced electron wave packet during its temporal evolution, extracting both the amplitude and the phase. Calculations reproduce our experimental results. Our approach constitutes a method for measuring the photoionization delays of a resonance and enables the reconstruction of the electron wave packet in the time domain. This concept of an interference-controlled Fano line shape is a step toward attosecond quantum optics with potential ramifications into nanoscience and next-generation optical materials.

Han, Meng [ETH Zürich (Switzerland); Kansas State ↗
DOE OSTI2022

Magnetic Ordering in a High‐Spin Donor–Acceptor Conjugated Polymer

Abstract The development of open‐shell organic molecules that magnetically order at room temperature,which can be practically applied, remains a grand challenge in chemistry, physics, and materials science. Despite the exploration of vast chemical space, design paradigms for organic paramagnetic centers generally result in unpaired electron spins that are unstable or isotropic. Here, a high‐spin conjugated polymer is demonstrated, which is composed of alternating cyclopentadithiophene and benzo[1,2‐ c ;4,5‐ c ′]bis[1,2,5]thiadiazole heterocycles, in which macromolecular structure and topology coalesce to promote the spin center generation and intermolecular exchange coupling. Electron paramagnetic resonance (EPR) spectroscopy is consistent with spatially localized spins, while magnetic susceptibility measurements show clear anisotropic spin ordering and exchange interactions that persist at room temperature. The application of long‐range π‐correlations for spin center generation promotes remarkable stability. This work offers a fundamentally new approach to the implementation of this long‐sought‐after physical phenomenon within organic materials and the integration of manifold properties within emerging technologies.

Steelman, Michael E.↗
DOE OSTI2022

Concurrent Pressure-Induced Spin-State Transitions and Jahn–Teller Distortions in MnTe

Cooperative Jahn-Teller (JT) distrotion accompanied by electromagnetic-lattice coupling plays a crucial role in numerous important phenomena in materials science. The JT distortion occurring in high-spin 3d 4 and 3d 9 configurations in octahedral complexes is common, but similarly large distortion due to lifting the degeneracy of t 2g orbits has so far seldomly observed. Here we report the discovery of pressure-induced cooperative JT effect coupled with a large volume-collapse of ~12.8% and a magnetic moment collapse from S = 5/2 to S = 1/2 at ~20.9 GPa in MnTe. The first-principles calculation indicates that weakened p-d hybridization and enhanced d states localization result in lifting t 2g orbital degeneracy in Mn 2+ (d 5 ) which induced a cooperative JT effect-triggered electromagnetic-lattice coupling. Furthermore, these findings suggest a new mechanism for the cooperative JT distortion via pressure induced ligand distortion in antiferromagnetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rapid data acquisition and machine learning-assisted composition design of functionally graded alloys via wire arc additive manufacturing

Abstract The lack of high-quality datasets in materials science hinders artificial intelligence (AI)-driven alloy design. To address this challenge, wire arc additive manufacturing (WAAM) was employed to fabricate graded alloys, generating extensive data for machine learning (ML)-assisted property prediction. ML models were developed using high-throughput experiments, computational models, and genetic algorithm to optimize feature selection, successfully predicting hardness and porosity. The ML model demonstrated its efficacy by designing a gradient alloy with enhanced properties. However, scaling up revealed uncertainties in tensile property and porosity due to differences in size and thermal conditions between the designed alloy build and the gradient print used to construct the ML model. This underscores the need for uncertainty quantification and process optimization in WAAM-driven alloy design. Our work advances AI-integrated additive manufacturing, offering a rapid approach to exploring process–structure–property relationships and accelerating materials development.

Wang, Xin↗
DOE OSTI2023

Optimizing training trajectories in variational autoencoders via latent Bayesian optimization approach *

Unsupervised and semi-supervised ML methods such as variational autoencoders (VAE) have become widely adopted across multiple areas of physics, chemistry, and materials sciences due to their capability in disentangling representations and ability to find latent manifolds for classification and/or regression of complex experimental data. Like other ML problems, VAEs require hyperparameter tuning, e.g. balancing the Kullback–Leibler and reconstruction terms. However, the training process and resulting manifold topology and connectivity depend not only on hyperparameters, but also their evolution during training. Because of the inefficiency of exhaustive search in a high-dimensional hyperparameter space for the expensive-to-train models, here we have explored a latent Bayesian optimization (zBO) approach for the hyperparameter trajectory optimization for the unsupervised and semi-supervised ML and demonstrated for joint-VAE with rotational invariances. We have demonstrated an application of this method for finding joint discrete and continuous rotationally invariant representations for modified national institute of standards and technology database (MNIST) and experimental data of a plasmonic nanoparticles material system. The performance of the proposed approach has been discussed extensively, where it allows for any high dimensional hyperparameter trajectory optimization of other ML models.

42 ENGINEERING↗
DOE OSTI2020

First-principles calculation of the configurational energy density of states for a solid-state ion conductor with a variant of the Wang and Landau algorithm

In this work, a variant of the Wang and Landau algorithm for calculation of the configurational energy density of states is proposed. The algorithm was developed for the purpose of using first-principles simulations, such as density functional theory, to calculate the partition function of disordered sublattices in crystal materials. The expensive calculations of first-principles methods make a parallel algorithm necessary for a practical computation of the configurational energy density of states within a supercell approximation of a solid-state material. The algorithm developed in this work is tested with the two-dimensional (2d) Ising model to bench mark the algorithm and to help provide insight for implementation to a materials science application. Tests with the 2d Ising model revealed that the algorithm has good performance compared to the original Wang and Landau algorithm and the 1/$\textit{t}$ algorithm, in particular the short iteration performance. Further, a proof of convergence is presented within an adiabatic assumption, and the analysis is able to correctly predict the time dependence of the modification factor to the density of states. The algorithm was then applied to the lithium and lanthanum sublattice of the solid-state lithium ion conductor Li 0.5 La 0.5 TiO 3 . This was done to help understand the disordered nature of the lithium and lanthanum. The results find, overall, that the algorithm performs very well for the 2d Ising model and that the results for Li 0.5 La 0.5 TiO 3 are consistent with experiment while providing additional insight into the lithium and lanthanum ordering in the material. The primary result is that the lithium and lanthanum become more mixed between layers along the c axis for increasing temperature. In part, the simulation of the disordered Li 0.5 La 0.5 TiO 3 system serves as a benchmark for what size systems are currently and in the near future practical to calculate with density functional theory methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Elastic Bayesian Model Calibration

Functional data are ubiquitous in scientific modeling. For instance, quantities of interest are modeled as functions of time, space, energy, density, etc. Uncertainty quantification methods for computer models with functional response have resulted in tools for emulation, sensitivity analysis, and calibration that are widely used. However, many of these tools do not perform well when the computer model’s parameters control both the amplitude variation of the functional output and its alignment (or phase variation). This paper introduces a framework for Bayesian model calibration when the model responses are misaligned functional data. The approach generates two types of data out of the misaligned functional responses: (1) aligned functions so that the amplitude variation is isolated and (2) warping functions that isolate the phase variation. These two types of data are created for the computer simulation data (both of which may be emulated) and the experimental data. The calibration approach uses both types so that it seeks to match both the amplitude and phase of the experimental data. The framework is careful to respect constraints that arise, especially when modeling phase variation, and is framed in a way that it can be done with readily available calibration software. In conclusion, we demonstrate the techniques on two simulated data examples and on two dynamic material science problems: a strength model calibration using flyer plate experiments and an equation of state model calibration using experiments performed on the Sandia National Laboratories’ Z-machine.

97 MATHEMATICS AND COMPUTING↗