Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogen program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Electroproduction of À0 in the resonance region at high Q2 with CLAS

An extensive program is underway at Jefferson Lab to study the eletromagnetic excitations of baryon states. We report the analysis of exclusive single ?0 electroproduction in the resonance region at Jefferson Lab in the Q2 range of 2 to 6 GeV2/c2. A longitudinally polarized 5.75 GeV electron beam was incident on a 5 cm long liquid Hydrogen target. The CLAS spectrometer at Jefferson Lab was used to detect the final state particles. The data was taken between October 2001 and January 2002. Preliminary results for differential cross sections over the entire 4? c.m. solid angle will be presented. This high precision measurement will allow us to access the structure and dynamics of nucleon excitations with masses up to 2 GeV.

Ungaro, Maurizio↗

Characteristics of HCN removal using CaO at high temperatures

Experimental investigation on the removal of hydrogen cyanide (HCN) using calcium oxide (CaO) was carried out in a fixed bed reactor at temperature ranging from 300 to 1173 K, and the original HCN was produced during the pyrolysis of pyridine. Effects of temperature, volume space velocity, and initial HCN concentration on HCN removal were discussed. The results of temperature-programmed experiments show that temperature is the main factor affecting HCN removal. With the formation of CO, HCN starts to decrease from 473 K, and remains unchanged from 673 to 873 K. At 873 K, there is a further decrease in HCN without CO formation, and when temperature is higher than 1023 K, HCN is removed completely. In the isothermal experiments, CaCN{sub 2} was detected at 723 K, but at higher temperatures of 923 and 1123 K, there was no CaCN{sub 2} in the solid residues, and the nitrogen in the removed HCN was equal to that in the formed N{sub 2}. This indicates that at a lower temperature CaO is consumed to remove HCN, CaO + 2HCN {yields} CaCN{sub 2} + CO + H{sub 2}; but at a higher temperature, CaO acts as a catalyst for HCN removal, 2C{sub i}H{sub j} + 2HCN {yields} N{sub 2} + (j + 1 - k)H{sub 2} + 2C{sub I} + 1H{sub k}. The investigation on the removal efficiency shows that there is a critical temperature and a critical volume space velocity at which the HCN removal efficiency is able to reach up to 100%. 41 refs., 9 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Experimental results of the QUENCH-16 bundle test on air ingress

The out-of-pile bundle experiment QUENCH-16 on air ingress was conducted in the electrically heated 21-rod QUENCH facility at KIT in July 2011. It was performed in the frame of the EC supported LACOMECO program. The test scenario included the oxidation of the Zircaloy-4 claddings in air following a limited pre-oxidation in steam, and involved a long period of oxygen starvation to promote interaction with the nitrogen. The primary aim was to examine the influence of the formed oxide layer structure on bundle coolability and hydrogen release during the terminal flooding phase. QUENCH-16 was thus a companion test to the earlier air ingress experiment, QUENCH-10, which was performed with strongly pre-oxidized bundle. Unlike QUENCH-10, significant temperature escalation and intensive hydrogen release were observed during the reflood phase. Post-test investigations of bundle cross sections reveal residual nitride traces at various elevations. The external part of the oxide scale is of porous structure due to re-oxidation of nitrides during reflood. Relative thick internal oxide scales underneath this porous layer and residual nitrides were formed during reflood. At lower bundle elevations frozen partially oxidized melt was detected, relocated from upper elevations. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fuels and Materials Challenges for the Very High Temperature Reactor

High Temperature Gas-cooled Reactors (HTGRs) featuring particle fuel are a very mature technology. Commercial deployment occurred in the mid-1980's with the Fort St.Vrain and Thorium Hochtemperatur Reaktor by providing electricity to the grids in the United States and West Germany, respectively. The technology was then adopted by Japan and China with the operation of the High Temperature Test Reactor in Oarai, Japan and the High Temperature Reactor (HTR-10) in China. These commercial reactors typically operate with an outlet coolant temperature of 750 deg. C to 800 deg. C. Increasing the outlet temperature of the HTGR to even higher temperatures above 900 deg. C will improve the thermodynamic efficiency of the system and enable application of a new class of gas reactor, the very high temperature reactor (VHTR), to provide process heat, electricity, and hydrogen to a broad range of industrial customers with the attendant benefits of improved energy security and reduced CO{sub 2} emissions. However, the increase in coolant outlet temperature presents a number of technical challenges associated with fuels and materials. For over a decade, the U.S. Department of Energy has been sponsoring a broad program of research and development with a goal of addressing the technical fuels and materials challenges to support deployment of a VHTR that could safely and economically operate at outlet temperatures of 750 to 950 deg. C. In summary, fuels and materials challenges exist with deploying a VHTR with an outlet temperature of 950 deg. C in the areas of structural materials, graphite and TRISO fuel. However, R and D is underway or has recently been completed suggesting that technical solutions are possible. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Generating Emissions Inventory for Carbon Capture and Storage Analysis for Carbon-Intensive Industrial Sectors

Decarbonizing the industrial sector is critical to achieve carbon dioxide (CO2) emissions reductions goals of the Biden Administration. Currently available decarbonization options include electrification, fuel switching to zero carbon fuels like green hydrogen (H2) and carbon capture and storage (CCS). Application of post-combustion carbon capture (PCCC) technology in the power sector, as well as research at the U.S. Department of Energy's Fossil Energy and Carbon Management (FECM) Office has shown that its application in the industrial sector could have co-benefits in the form of emissions reductions of non-CO2 regulated pollutants. For example, solvent based PCCC systems require pre-conditioning of flue gas to remove sulfur and particulate matter (PM) upstream of the CO2 absorber. However, there is a lack of understanding about the type of non-CO2 pollutants which can be captured and the amount of reduction possible. PCCC application differs across industrial sectors as it depends on the availability of decarbonization options, characteristics of industrial processes and the amount and composition of pollutant flows. Certain facilities can also have multiple effluent flows with or without a CO2 stream. As such, understanding industrial processes and their effluent flows in detail is required to quantify the co-benefits opportunities presented by PCCC. Considering this requirement, the goal of this analysis is to develop a high-resolution inventory of effluent flows from facilities of 8 industrial sectors in the U.S. These industrial sectors - ethanol, ammonia, cement, steel, natural gas processing, hydrogen, petroleum refining and wood and pulp products - have carbon-intensive effluent flows, and thus are prime candidates for PCCC applications. In this study, we map the composition of pollutant flow from flue stacks across the identified facilities. Using data available in three Environmental Protection Agency (EPA) databases - the Green House Gas Reporting Program (GHGRP), the National Emissions Inventory (NEI) and the Toxic Release Inventory (TRI), we create a combined inventory which lists the type, amount, and concentration of pollutant flows. Using total weight of the pollutant flow back calculated from observed data for CO2 concentrations in flue gas for individual sectors, we calculate the concentration of each pollutant in the flue gas stream. Thus, the resultant emissions inventory includes the following details for each facility in the sector: facility-level and if possible, process-level pollutant flows, concentrations of pollutants in the flue gas, and geographical coordinates of the facilities. A detailed statistical analysis and summary allows us to search for erroneous data and remove them from the final inventory. The generation of the inventory is achieved using a python-based framework which can recreate this inventory for other industrial sectors as well as using newer releases of emission inventories from EPA. The statistical analysis performed on the inventory is also calibrated and automated to identify outliers efficiently.

air pollutants↗

Advanced gasifier and water gas shift technologies for low cost coal conversion to high hydrogen syngas

The Gas Technology Institute (GTI) and team members RTI International (RTI), Coanda Research and Development, and Nexant, are developing and maturing a portfolio of technologies to meet the United States Department of Energy (DOE) goals for lowering the cost of producing high hydrogen syngas from coal for use in carbon capture power and coal-to-liquids/chemicals. This project matured an advanced pilot-scale gasifier, with scalable and commercially traceable components, to readiness for use in a first-of-a-kind commercially-relevant demonstration plant on the scale of 500-1,000 tons per day (TPD). This was accomplished through cold flow simulation of the gasifier quench zone transition region at Coanda and through an extensive hotfire gasifier test program on highly reactive coal and high ash/high ash fusion temperature coals at GTI. RTI matured an advanced water gas shift process and catalyst to readiness for testing at pilot plant scale through catalyst development and testing, and development of a preliminary design basis for a pilot scale reactor demonstrating the catalyst. A techno-economic analysis was performed by Nexant to assess the potential benefits of the gasifier and catalyst technologies in the context of power production and methanol production. This analysis showed an 18%reduction in cost of power and a 19%reduction in cost of methanol relative to DOE reference baseline cases.

01 COAL, LIGNITE, AND PEAT↗

UFD Storage and Transportation - Transportation Working Group Report

The Used Fuel Disposition (UFD) Transportation Task commenced in October 2010. As its first task, Pacific Northwest National Laboratory (PNNL) compiled a list of structures, systems, and components (SSCs) of transportation systems and their possible degradation mechanisms during extended storage. The list of SSCs and the associated degradation mechanisms [known as features, events, and processes (FEPs)] were based on the list of used nuclear fuel (UNF) storage system SSCs and degradation mechanisms developed by the UFD Storage Task (Hanson et al. 2011). Other sources of information surveyed to develop the list of SSCs and their degradation mechanisms included references such as Evaluation of the Technical Basis for Extended Dry Storage and Transportation of Used Nuclear Fuel (NWTRB 2010), Transportation, Aging and Disposal Canister System Performance Specification, Revision 1 (OCRWM 2008), Data Needs for Long-Term Storage of LWR Fuel (EPRI 1998), Technical Bases for Extended Dry Storage of Spent Nuclear Fuel (EPRI 2002), Used Fuel and High-Level Radioactive Waste Extended Storage Collaboration Program (EPRI 2010a), Industry Spent Fuel Storage Handbook (EPRI 2010b), and Transportation of Commercial Spent Nuclear Fuel, Issues Resolution (EPRI 2010c). SSCs include items such as the fuel, cladding, fuel baskets, neutron poisons, metal canisters, etc. Potential degradation mechanisms (FEPs) included mechanical, thermal, radiation and chemical stressors, such as fuel fragmentation, embrittlement of cladding by hydrogen, oxidation of cladding, metal fatigue, corrosion, etc. These degradation mechanisms are discussed in Section 2 of this report. The degradation mechanisms have been evaluated to determine if they would be influenced by extended storage or high burnup, the need for additional data, and their importance to transportation. These categories were used to identify the most significant transportation degradation mechanisms. As expected, for the most part, the transportation importance was mirrored by the importance assigned by the UFD Storage Task. A few of the more significant differences are described in Section 3 of this report

08 HYDROGEN↗

Theoretical Studies of Surface Reactions on Metals and Electronic Materials (Final Report)

This proposal describes the proposed renewal of a theoretical research program on the structure and reactivity of molecules adsorbed on transition metal surfaces. A new direction of the work extends investigations to interfaces between solid surfaces, adsorbates and aqueous solutions and includes fundamental work on photoinduced electron transport into chemisorbed species and into solution. The goal is to discover practical ways to reduce water to hydrogen and oxygen using radiation comparable to that available in the solar spectrum. The work relates to two broad subject areas: photocatalytic processes and production of hydrogen from water. The objective is to obtain high quality solutions of the electronic structure of adsorbate-metal-surface-solution systems so as to allow activation barriers to be calculated and reaction mechanisms to be determined. An ab initio embedding formalism provides a route to the required accuracy. New theoretical methods developed during the previous grant period will be implemented in order to solve the large systems involved in this work. Included is the formulation of a correlation operator that is used to treat localized electron distributions such as ionic or regionally localized distributions. The correlation operator which is expressed as a two-particle projector is used in conjunction with configuration interaction.

08 HYDROGEN↗

Used Fuel Disposition Campaign: Embrittlement and DBTT of High-Burnup PWR Fuel Cladding Alloys

Structural analyses of high-burnup (HBU) fuel require cladding mechanical properties and failure limits to assess fuel behavior during long-term dry-cask storage and transportation. Pre-storage drying-transfer operations and early stage storage subject cladding to higher temperatures and pressure-induced tensile hoop stresses relative to in-reactor operation and pool storage. Under these conditions, radial hydrides may precipitate during slow cooling and provide an additional embrittlement mechanism as the cladding temperature decreases below the ductile-to-brittle transition temperature (DBTT). On the basis of previous test results, susceptibility to radial-hydride precipitation depends on cladding material and microstructure, hydrogen content (CH), and pre-drying hydride distribution, as well as peak hoop stresses and temperatures during drying operations and storage. Susceptibility to embrittlement depends on the extent of radial-hydride precipitation, the number density of circumferential hydrides, and the thickness of the outer-surface hydride rim. The goal of the testing program is to determine drying-storage conditions for which the cladding remains ductile at ambient temperature, in other words, with the DBTT ≤20°C.

Billone, M. C.↗

Chemical Thermodynamic Modeling of Molten Salts to Support Off-Gas Abatement Systems

The reprocessing of used nuclear fuel by any means will liberate gaseous fission products, such as hydrogen ( 3 H), carbon ( 14 C), noble gases ( 85 Kr), and halogens ( 129 I), from the irradiated fuel. These elements will distribute through chemical processing operations and partition into process off-gas streams, and the specific volatile release fractions will be dictated by the chemical and physical properties of the system. A recent assessment found that there were significant knowledge gaps regarding the release quantities of volatile radionuclides from individual unit operations. These knowledge gaps limited the ability to determine what dedicated off-gas treatment technologies could be required for electrochemical-based reprocessing facilities. Unfortunately, experimental efforts to quantify release fractions are limited by the challenges associated with performing experiments using irradiated fuel. This report documents preliminary thermodynamic predictions of iodine and tritium release from chloride-based molten salts as part of an effort to better direct resources toward those experiments (both simulant and irradiated) that will be of the greatest impact. It was predicted that less than 0.5% of tritium was expected to be released and that nearly all of that amount would be released as H 2 . Thermochemical data for hydrogen (H 2 ) are of high fidelity, and no additional validation is recommended. Less than 0.05% of iodine was predicted to be released, with the primary volatile species being Cs 2 I 2 . Unlike the tritium predictions, the data underpinning the iodine release predictions are of low quality. It is recommended that a limited experimental program be dedicated to expanding the current physical property and thermodynamic property data for iodine in electrochemical processing and molten salt conditions, including vapor pressure measurements for the dimerized species predicted to comprise the majority of iodine release. Validating and improving the thermodynamic properties used in predictive modeling can reduce the need for expensive testing with irradiated fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integrated Turbine Component Cooling Designs Facilitated by Additive Manufacturing and Optimization

This research program involved the development of improved gas turbine cooling by optimizing the combined internal and film cooling configurations used for turbine blades and vanes. Improved cooling of turbine airfoils allows the gas turbines to be operated at higher temperatures which improves efficiency for gas turbine-based power generation. This also facilitates operation with hydrogen-based fuels which inherently generate higher operating temperatures. Designs of the new cooling configurations were based on the added geometric flexibility that is available when using metal additive manufacturing techniques. When making these designs, adjustments were made to account for imperfections occurring in the metal additive manufacturing process. New designs for film cooling holes were developed using computational adjoint gradient optimization techniques which generated a unique film cooling hole with 70% greater film cooling effectiveness compared to conventional shaped film cooling holes. A major factor in improving the film cooling effectiveness were small external protrusions on either side of the new hole which generated vortices that pushed coolant towards the surface and increased the lateral spreading of the coolant. Our studies also included optimization of film cooling holes that can be built with conventional manufacturing techniques and optimizing the internal coolant channels that supply coolant to the film cooling holes. Various internal coolant channel shapes were investigated and designs that maximized the cooling of the airfoil while minimizing pressure losses in the channel flows were identified. Testing and verification of the performance of the final configurations was done with a transonic wind tunnel facility which allowed testing at engine realistic high velocities. Final testing of the combined internal and film cooling configurations was done by incorporating the configurations in Penn State’s National Experimental Turbine (NExT) vane. These tests confirmed the enhanced overall cooling effectiveness provided by the new cooling configuration designs.

03 NATURAL GAS↗

Dry Storage of Research Reactor Spent Nuclear Fuel - 13321

Spent fuel from domestic and foreign research reactors is received and stored at the Savannah River Site's L Area Material Storage (L Basin) Facility. This DOE-owned fuel consists primarily of highly enriched uranium in metal, oxide or silicide form with aluminum cladding. Upon receipt, the fuel is unloaded and transferred to basin storage awaiting final disposition. Disposition alternatives include processing via the site's H Canyon facility for uranium recovery, or packaging and shipment of the spent fuel to a waste repository. A program has been developed to provide a phased approach for dry storage of the L Basin fuel. The initial phase of the dry storage program will demonstrate loading, drying, and storage of fuel in twelve instrumented canisters to assess fuel performance. After closure, the loaded canisters are transferred to pad-mounted concrete overpacks, similar to those used for dry storage of commercial fuel. Unlike commercial spent fuel, however, the DOE fuel has high enrichment, very low to high burnup, and low decay heat. The aluminum cladding presents unique challenges due to the presence of an oxide layer that forms on the cladding surface, and corrosion degradation resulting from prolonged wet storage. The removal of free and bound water is essential to the prevention of fuel corrosion and radiolytic generation of hydrogen. The demonstration will validate models predicting pressure, temperature, gas generation, and corrosion performance, provide an engineering scale demonstration of fuel handling, drying, leak testing, and canister backfill operations, and establish 'road-ready' storage of fuel that is suitable for offsite repository shipment or retrievable for onsite processing. Implementation of the Phase I demonstration can be completed within three years. Phases II and III, leading to the de-inventory of L Basin, would require an additional 750 canisters and 6-12 years to complete. Transfer of the fuel from basin storage to dry storage requires integration with current facility operations, and selection of equipment that will allow safe operation within the constraints of existing facility conditions. Examples of such constraints that are evaluated and addressed by the dry storage program include limited basin depth, varying fuel lengths up to 4 m, (13 ft), fissile loading limits, canister closure design, post-load drying and closure of the canisters, instrument selection and installation, and movement of the canisters to storage casks. The initial pilot phase restricts the fuels to shorter length fuels that can be loaded to the canister directly underwater; subsequent phases will require use of a shielded transfer system. Removal of the canister from the basin, followed by drying, inerting, closure of the canister, and transfer of the canister to the storage cask are completed with remotely operated equipment and appropriate shielding to reduce personnel radiation exposure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

LANL Fuel Cell Program [Slides]

Fuel Cell R&D programs are the longest running non-weapons programs at LANL, running since 1977. The current DOE HFTO program grew out of the Los Alamos program. It is primarily polymer electrolyte membrame (PEM) technology. The cost and durability are the biggest barriers to commercialization. The program focus is on obtaining fundamental understanding to enable "knowledge-based innovation," and subsequent materials and process development.

08 HYDROGEN↗

High Frequency Transverse Instabilities in Low NOx Gas Turbines

This program addresses the topic of combustion instabilities under the goal of developing “Low-NOx Combustion Technology for ‘Air-Breathing’ Advanced Turbines”. With recent advances in high-temperature withstanding materials, the push towards higher efficiency has resulted in efforts to design high temperature, low NOx gas turbines. The development of such low NOx systems is often plagued with combustion instabilities. These instabilities manifest with acoustic modes that are longitudinal, transverse or both. A large body of literature and work exists addressing the underlying mechanisms and models for longitudinal instabilities and these have been successfully implemented in the design tools for low NOx gas turbines. The flame response aspect of the thermoacoustic feedback loop was often modeled in an acoustically compact framework since for low frequencies, the flame length scale was small compared to the acoustic wavelength. This enabled simplification where the modeling focused only on the overall flame response and not the local spatial distribution of the flame response. In addition, additional mechanisms such as the direct effect of pressure fluctuations on the flame response could be neglected. In contrast, high frequency instabilities which often are transverse in nature, have received relatively less attention in the literature. The flame is no longer acoustically compact and thus the local distribution of heat release must be accurately understood. The flame responds to velocity fluctuations, equivalence ratio fluctuations as before, but also to pressure fluctuations through kinetic effects. These aspects of high-frequency instabilities make it a challenging problem that requires a detailed elucidation of the underlying mechanisms and creating models for them. In this program we significantly improved the understanding of these instabilities through a combination of experiments (informed by interactions with OEMs), modeling of measured data and reduced order modeling of flame response. The results from the program can be used as basis for robust design tools that are essential for successfully developing gas turbines that operate in an environmentally acceptable manner with mitigation strategies for high-frequency instabilities.

08 HYDROGEN↗

Century: Zap Energy’s 100-kW-Scale Repetitive Sheared-Flow-Stabilized Z -Pinch System with Liquid Metal Cooling

Zap Energy is developing the sheared-flow-stabilized (SFS) Z-pinch concept for commercial applications. The SFS Z pinch relies on plasma self-organization, in the sense that plasma dynamics play a critical role in confinement. Using plasma axial current for confinement and compression eliminates the need for external confinement or heating technologies. This compact magnetic confinement technology could, in turn, provide the basis for a cost-effective deuterium-tritium fusion power plant. In addition to a robust experimental program pushing plasma performance towards breakeven conditions, Zap Energy has parallel programs developing power handling systems suitable for future power plants. Technologies under development include high average-power repetitive pulsed power, high duty-cycle cathodes, and liquid metal wall systems. Century is the name of Zap Energy’s first effort to integrate these three components into an operational system capable of firing non-reacting hydrogen SFS Z-pinch plasmas into a liquid-metal-lined container at sustained repetition rates on the order of 0.1 Hz. Here, the pulsed power driver and liquid metal heat exchanger are both designed to sustain input powers of 100 kW. Construction and initial operations with an interim ~10 kW liquid metal heat exchanger are described.

Century↗

RODeO (Revenue Operation and Device Optimization Model) [SWR 20-67]

The Revenue, Operation, and Device Optimization (RODeO) model explores optimal system design and operation considering different levels of grid integration, equipment cost, operating limitations, financing, and credits and incentives. RODeO is a price-taker model formulated as a mixed-integer linear programming (MILP) model in the GAMS modeling platform. The objective is to maximizes the net revenue for a collection of equipment at a given site. The equipment includes generators (e.g., gas turbine, steam turbine, solar, wind, hydro, fuel cells, etc.), storage systems (batteries, pumped hydro, gas-fired compressed air energy storage, long-duration systems, hydrogen), and flexible loads (e.g., electric vehicles, electrolyzers, flexible building loads). The input data required by RODeO can be classified into three bins: 1) utility service data, which refers to retail utility rate information (meter cost, energy and demand charges), 2) electricity market data, which include energy and reserve prices, 3) other inputs, which refer to additional electrical demand, product output demand, technological assumptions, financial properties, and operational parameters.

Guerra Fernandez, Omar Jose↗

Gas composition observed by destructive examination of 3013 containers

The Department of Energy’s Integrated Surveillance and Monitoring Program implements requirements to measure gas pressure and gas composition during destructive examination of 3013 containers as required by DOE’s 3013 Standard. Gas pressures and gas compositions measured by the Program during destructive examination of 3013 containers from 2007 to 2017 are reported here. The maximum gas pressure within the population of containers that have undergone destructive examination was 299 kPa (43.4 psia) and this container had 0.52 wt% moisture which is higher than the Standard allows. The majority of containers have essentially no gas pressurization. Hydrogen was quantifiable above the measurement uncertainty in less than half (47 out of 114) of the containers that have undergone destructive examination. The amount of hydrogen that is generated within the sealed 3013 containers is always less than the amount predicted by the 3013 Standard’s pressure equation with the maximum observed hydrogen fraction (observed moles of hydrogen/predicted moles of hydrogen) of 0.18. It is recommended that for the purposes of calculating a maximum hydrogen pressure using the 3013 equation, a correction to the amount of hydrogen produced from decomposition of the water be incorporated. The pressure (or moles) of H 2 should be reduced by multiplying by a hydrogen fraction as described in the text. Helium and nitrogen are the other major constituents. Oxygen which is initially present in nearly all of the containers undergoing destructive examination was consumed to low values in all cases. The highest observed oxygen concentration was 1.7%, and in this case the H 2 concentration was essentially zero. Other minor gases observed in some cases included CO 2 with maximum content of 3.5%, CO with maximum content of 0.8%, N 2 O with maximum content of 1.4%, and CH 4 with maximum content of 0.4%.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Summary of Gas Generation Behavior Observed in 3013 Surveillance and Monitoring Program Shelf-Life Experiments

Gas generation experiments have been conducted in small- and full-scale test containers at Los Alamos National Laboratory on samples of plutonium oxide material collected from plutonium processes across the DOE complex and tested at the bounding conditions for the Department of Energy 3013 Standard. The gas composition and pressures in the sealed experimental containers were measured over periods of months to years. These experiments have provided results for the formation and consumption of hydrogen and other gases. The conditions supporting the formation of flammable gas mixtures of hydrogen and oxygen in flammable gas mixtures were also determined. Different behaviors were observed between the materials tested based on their compositions, the stabilization performed on the material, and the post stabilization handling of the material. Many of the experiments are still ongoing. This report summarizes the results obtained for the gas generation behavior for high-purity plutonium oxides and salt-bearing impure plutonium oxides in sealed containers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗