Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fluid wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Acoustic fluidization - A new geologic process

A number of geologic processes, particularly seismic faulting, impact crater slumping, and long runout landslides, require the failure of geologic materials under differential stresses much smaller than expected on the basis of conventional rock mechanics. This paper proposes that the low strengths apparent in these phenomena are due to a state of 'acoustic fluidization' induced by a transient strong acoustic wave field. The strain rates possible in such a field are evaluated, and it is shown that acoustically fluidized debris behaves as a newtonian fluid with a viscosity in the range 100,000 to 10,000,000 P for plausible conditions. Energy gains and losses in the acoustic field are discussed, and the mechanism is shown to be effective if internal dissipation in the field gives a Q approximately greater than 100. Whether such values for Q are realized is not known at present. However, acoustic fluidization provides a qualitatively correct description of the failure of rock debris under low differential stresses in the processes of faulting, crater slumping, and long runout landslides. Acoustic fluidization thus deserves serious consideration as a possible explanation of these phenomena.

Melosh, H. J.↗
NASA NTRS2003

Control of Interacting Vortex Flows at Subsonic and Transonic Speeds Using Passive Porosity

A wind tunnel experiment was conducted in the NASA Langley Research Center (LaRC) 8-foot Transonic Pressure Tunnel (TPT) to determine the effects of passive surface porosity on vortex flow interactions about a general research fighter configuration at subsonic and transonic speeds. Flow- through porosity was applied to a wind leading-edge extension (LEX) mounted to a 65 deg cropped delta wind model to promote large nose-down pitching moment increments at high angles of attack. Porosity decreased the vorticity shed from the LEX, which weakened the LEX vortex and altered the global interactions of the LEX and wing vortices at high angles of attack. Six-component forces and moments and wing upper surface static pressure distributions were obtained at free- stream Mach numbers of 0.50, 0.85, and 1.20, Reynolds number of 2.5(10(exp-6) per foot, angles of attack up to 30 deg and angles of sideslip to plus or minus 8 deg. The off-surface flow field was visualized in selected cross-planes using a laser vapor screen flow visualization technique. Test data were obtained with a centerline vertical tail and with alternate twin, wing-mounted vertical fins having 0 deg and 30 deg cant angles. In addition, the porosity of the LEX was compartmentalized to determine the sensitivity of the vortex- dominated aerodynamics to the location and level of porosity applied to the LEX.

NATO FURNISHED↗
DOE OSTI2020

Erosion-Corrosion Detection in Carbon Steel Pipe Loops using SRNLs Thickness and Mass Loss Measurement Coupons - 20464

Structural health of waste transfer infrastructure is of utmost importance to DOE and communities surrounding their active sites. A Fitness-for-Service (FFS) program for the Waste Transfer System has been implemented by the US Department of Energy (DOE) for the purposes of evaluating and quantifying the degradation of critical components. Currently, the method of approach is to section and evaluate pipelines that have been removed at end service. In order to augment data collection methods applied to making lifespan estimates of waste transfer system components, Florida International University (FIU) has been investigating new-technology based strategies for quantifying the rate of degradation. Present research considers the option of a coupon system installed on a section of pipe at points of interest that will provide easy access to high resolution measurements of erosion/corrosion rates during operation. Researchers at Savannah River National Laboratory (SRNL) have developed this novel solution for in situ erosion and corrosion measurements in many applicable locations such as tanks, pipes, ducts, and injection points. The coupons are approximately 12.7 mm (1/2 inch) in diameter and 25.4 mm (1 inch) in length and can be placed in the pipe sections using Swagelok compression fittings. The coupon design allows for monitoring of the total degradation resulting from corrosion and erosion. High-resolution Ultrasonic Thickness (UT) testing allows in-situ monitoring of both degradation mechanisms. When removed from the system mass loss resulting from corrosion and erosion may also be evaluated. Experimental testing at FIU implemented the SRNL coupon system in a 6.10 meter (20 foot) pipe loop system comprised of 50.8 mm (2 inch) and 76.2 mm (3 inch) pipe sections in order to replicate expected use cases at the sites. Operational conditions were emulated by pumping abrasive materials through the pipeline at full capacity and collecting measurements from the SRNL coupons. Initial testing was conducted by circulating water followed by a mixture of sand and water for uniform wear rates. Thickness changes and mass loss were measured, and the surface exposed to the process fluid was observed for visual evidence of characteristic wear patterns resulting from an erosive environment. The test matrix consisted of several hours of operation and using fine, medium and coarse grain sands. Test results were analyzed to check for all three parameters (mass loss/gain, thickness change and surface patters) which could provide estimates of the remaining useful life of the pipe sections. Thus, the research presents the findings of this evaluation of the SRNL coupons as a means for conducting high accuracy, cost effective in-situ analysis of pipeline and waste transfer systems for erosion and corrosion susceptibility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1997

Fully Threaded Tree for Adaptive Refinement Fluid Dynamics Simulations

A fully threaded tree (FTT) for adaptive refinement of regular meshes is described. By using a tree threaded at all levels, tree traversals for finding nearest neighbors are avoided. All operations on a tree including tree modifications are O(N), where N is a number of cells, and are performed in parallel. An efficient implementation of the tree is described that requires 2N words of memory. A filtering algorithm for removing high frequency noise during mesh refinement is described. A FTT can be used in various numerical applications. In this paper, it is applied to the integration of the Euler equations of fluid dynamics. An adaptive mesh time stepping algorithm is described in which different time steps are used at different l evels of the tree. Time stepping and mesh refinement are interleaved to avoid extensive buffer layers of fine mesh which were otherwise required ahead of moving shocks. Test examples are presented, and the FTT performance is evaluated. The three dimensional simulation of the interaction of a shock wave and a spherical bubble is carried out that shows the development of azimuthal perturbations on the bubble surface.

FINITE ELEMENT ANALYSIS↗
NASA NTRS1998

Numerical Simulations of an Unsteady Rocket Launch from the AH-64D Apache Longbow Helicopter

Rocket and missile firings from attack helicopters can cause main engine compressor stall. Studies of this phenomenon suggest that the main engine ingests either the plume from the rockets or the rocket blast waves. This creates surges at the inlet face, causing a loss of power in the main engine. The objective of this project is to set-up a computational fluid dynamics (CFD) simulation of the AH-64D Apache Longbow helicopter during a rocket launch, in order to qualitatively study the fluid dynamics of the problem. This project presents a progression of three unsteady Navier-Stokes solutions. The first unsteady solution involves only a rocket launch from its launch canister. The second solution is a launch from a canister mounted on the Apache's wing-pylon assembly. The last solution includes the Apache main engine and fuselage. The computations use a series of structured, overset grid systems, which allow for a rocket moving in a prescribed path. The method implements a Roe upwind scheme with LU-SGS (lower-upper factored symmetric Gauss-Seidel). A rotor pressure disk model approximates the helicopter rotor, while the rocket engine exit properties are applied as a prescribed boundary condition. Although the project is only at the half-way point, the first and second CFD simulations suggest the possibility of pressure wave interference. Sudden surges in pressure occur from two sources: at rocket start-up, and as the rocket leaves the canister. Wave patterns set-up by these sources appear to propagate to the location of the engine inlet. However the simplified geometry simulation with the main engine needs to be performed before coming to a conclusion.

Okamoto, Kevin↗
DOE OSTI2022

An Efficient Time-Domain Model to Simulate Parametric Resonances in a Floating Body Free to Move in Six Degrees of Freedom: Preprint

We present a computationally efficient time-domain model capable of simulating parametric resonances in a floating body in waves. The model assumes all wave forces to be linear, but the inertia and restoring forces acting on the body are expanded to second order in body motions. The simulation speed on a standard computer is approximately 40 times faster than real time. The model is applied to a soft-moored floating axisymmetric body which absorbs energy through heave, but is otherwise free to move in six degrees of freedom. Under certain conditions, we show that the body responds parametrically with large amplitudes not only in surge and pitch, but also in sway, roll, and yaw, provided it is given some small initial displacement in one of these out-of-plane modes. The predictions are confirmed by simulations using state-of-the-art nonlinear Froude-Krylov and computational fluid dynamics models.

parametric resonance↗
NASA NTRS1974

Viscous, radiating hypersonic flow about a blunt body

The viscous, radiating hypersonic flow past an axisymmetric blunt body is analyzed based on the Navier-Stokes equations, plus a radiative equation of transfer derived from the Milne-Eddington differential approximation. The fluid is assumed to be a perfect gas with constant specific heats, a constant Prandtl number of order unity, a viscosity coefficient varying as a power of the temperature, and an absorption coefficient varying as the first power of the density and as a power of the temperature. The gray gas assumption is invoked, thereby making the absorption coefficient independent of the spectral frequency. Limiting forms of the solutions are studied as the freestream Mach number freestream Reynolds number and the temperature ratio across the shock wave, go to infinity, and as the Bouguer number and the density ratio across the shock wave go to zero. The method of matched asymptotic expansions is used in the analysis, and it is shown that there is a far-field precursor, composed of two regions, in which the fluid mechanics can be neglected for all practical purposes but included for completeness.

Passamaneck, R. S.↗
NASA NTRS1988

Transition region, corona, and solar wind in coronal holes - Some two-fluid models

A model is presented which treats the heating of the corona and the heating and acceleration of the solar wind as a single process, namely, the turbulent dissipation of solar-generated Alfven waves at the Kolmogorov rate. This model is similar to that described by Hollweg (1986), except that the electron temperature and the proton temperature are allowed to have different values. It is found that, similar to the findings of Hollweg, solutions which yield base pressures in the observed range lead to solar wind flows which are much too slow at 1 AU; a new feature is the appearance of proton temperature peak near 3-4 solar radii. Thus, this model seems to be also unsatisfactory. Several possible resolutions are discussed.

Hollweg, Joseph V.↗
NASA NTRS1987

Hydrodynamical constraints on cosmic-ray acceleration in relativistic shocks

A two-fluid hydrodynamical model governing the transport of cosmic rays in a relativistically moving background plasma is developed. The equations are used to discuss the time asymptotic structure of a relativistic, plane-parallel shock wave significantly modified by first-order Fermi acceleration of cosmic rays. The model allows for an anisotropic cosmic-ray pressure tensor with pressure components parallel and perpendicular to the shock normal. It is surmised that the well-known energy threshold problem for diffusive shock acceleration that downstream particles have a large enough velocity to overtake the shock and subsequently scatter in the upstream medium before returning to the downstream medium may be expressed hydrodynamically by the condition V less than V(cr), where V is the fluid velocity relative to the shock and V(cr) is the relativistic cosmic-ray sound speed. Astrophysical implications of the results are briefly discussed.

Webb, G. M.↗
DOE OSTI2020

Dimits shift, avalanche-like bursts, and solitary propagating structures in the two-field flux-balanced Hasegawa–Wakatani model for plasma edge turbulence

We show that the recently introduced two-field flux-balanced Hasegawa–Wakatani (BHW) model captures the key features of drift-wave turbulent transport mediated by zonal flows observed in more complete and accurate gyrokinetic simulations, such as the existence of a nonlinear upshift of the threshold for drift wave turbulence driven transport, often called the Dimits shift, as well as non-local transport with avalanche bursts and solitary propagating structures. Because of the approximations made in the BHW model, these observations are made for the particle flux instead of the heat flux more commonly studied in ion temperature gradient (ITG) driven turbulence in fluid or gyrokinetic codes. Many of these features are not seen in other Hasegawa–Wakatani models, which confirm the critical role of the electron dynamics parallel to the magnetic field lines. To address questions regarding the role of boundary conditions on the drift-wave zonal flow dynamics, we apply our model to both a channel domain geometry and the more typical doubly periodic geometry. We only observe strong soliton-like solutions in the particle flux for the channel geometry, in the vicinity of the boundaries, where strong velocity shear and density gradients are generated, which are absent in the doubly periodic simulations. Changing the aspect ratio of the simulation domain also has a significant effect. In domains which are elongated in the radial direction, more complex multi-scale dynamics takes place, with multiple zonal jets interacting with each other, and large scale avalanches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Analytical and experimental investigations of the oblique detonation wave engine concept

Wave combustors, which include the oblique detonation wave engine (ODWE), are attractive propulsion concepts for hypersonic flight. These engines utilize oblique shock or detonation waves to rapidly mix, ignite, and combust the air-fuel mixture in thin zones in the combustion chamber. Benefits of these combustion systems include shorter and lighter engines which require less cooling and can provide thrust at higher Mach numbers than conventional scramjets. The wave combustor's ability to operate at lower combustor inlet pressures may allow the vehicle to operate at lower dynamic pressures which could lessen the heating loads on the airframe. The research program at NASA-Ames includes analytical studies of the ODWE combustor using Computational Fluid Dynamics (CFD) codes which fully couple finite rate chemistry with fluid dynamics. In addition, experimental proof-of-concept studies are being performed in an arc heated hypersonic wind tunnel. Several fuel injection design were studied analytically and experimentally. In-stream strut fuel injectors were chosen to provide good mixing with minimal stagnation pressure losses. Measurements of flow field properties behind the oblique wave are compared to analytical predictions.

Menees, Gene P.↗
DOE OSTI2024

Hydrodynamic Mechanism for Clumping along the Equatorial Rings of SN1987A and Other Stars

An explanation for the origin and number of clumps along the equatorial ring of Supernova 1987A has eluded decades of research. Our linear analysis and hydrodynamic simulations of the expanding ring prior to the supernova reveal that it is subject to the Crow instability between vortex cores. Here, the dominant wave number is remarkably consistent with the number of clumps, suggesting that the Crow instability stimulates clump formation. Although the present analysis focuses on linear fluid flow, future nonlinear analysis and the incorporation of additional stellar physics may further elucidate the remnant structure and the evolution of the progenitor and other stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Wastewater Disposal Has Not Significantly Altered the Regional Stress State in Southern Kansas

Wastewater disposal is primarily responsible for the increased seismicity rate since ~2013 in southern Kansas. Previous work that used shear-wave splitting (SWS) in southern Kansas interpreted an ~90° temporal rotation in the fast polarization direction and attributed it to increased pore pressures resulting from fluid injection. However, this interpreted rotation coincided with a change in the stations used to make the SWS measurements. We investigate the temporal variability of fast azimuths in southern Kansas by making SWS measurements on earthquake families with similar source–receiver paths recorded on a stable local seismic network. We select high-quality SWS measurements by investigating the stability of results across 65 different frequency bands between 0.5 and 15 Hz. We find that the fast polarization direction in southern Kansas is relatively constant with an average east-northeast (~N79°E) orientation between 2014 and 2017. Our fast polarization measurements are primarily a reflection of the maximum principal horizontal stress direction (SHmax). We observe a slight spatial change in SHmax to the northeast (~N55°E) near the Nemaha ridge in Oklahoma. However, we do not observe any significant temporal rotation of SHmax or variation in delay time (i.e., crack density) in southern Kansas, contrary to the earlier study. The previously interpreted ~90° rotation may either be a reflection of a very local stress change or a misinterpretation of SWS results potentially due to the use of inconsistent source–receiver paths. Our SWS measurements cover the period of peak wastewater disposal and seismicity rates and suggest an absence of significant temporal rotations in the local anisotropy and stress orientations associated with wastewater disposal.

Geochemistry & Geophysics↗
DOE OSTI2024

Experimental Study of Instabilities in Hydrogen-Air Fueled Rotating Detonation Combustion Presentation

Conventional gas turbine engines rely on an idealized constant pressure combustion process that in reality produces a pressure decrease as a result of viscous and other non-reversible losses. An alternative approach is rotating detonation combustion (RDC) which is a form of pressure gain combustion in which one or more detonation waves propagate an annular channel resulting in an increase in pressure across, subsequently providing greater work availability compared to deflagration ultimately leading to opportunities for greater thermodynamic efficiency when used in gas turbine engines that conventionally relies on constant. Modern gas turbine engines often rely on pre-mixed reactants to limit NOx emissions, although this may result in greater susceptibility to instabilities such as flashback and thermoacoustic oscillation, particularly for applications that utilize hydrogen as the fuel. Research in RDC has focused on non-premixed reactants thus limiting the occurrence of flashback, and high frequency detonation wave propagation (kHz) may interfere with the occurrence of thermoacoustic oscillations. Thermal NOx emissions are controlled through rapid combustion and sudden expansion of the working fluid. Although RDC may not be susceptible to instabilities encountered in conventional state of the art gas turbine engine combustion, there may be other mechanisms occurring that support instabilities that could be detrimental to performance.

Weber, Justin↗
NASA NTRS1976

Stellar convection theory. I - The anelastic modal equations

Methods are developed for dealing with the various dynamical problems that arise because of convective zones in stars. A system of equations for stellar convection is derived from the full equations of compressible fluid dynamics with the aid of two major approximations. The first of these is the anelastic approximation, which involves both the filtering out of acoustic waves and a suitable linearization of the fluctuating thermodynamic variables. The second one approximates the horizontal structure of convection by expanding the motion in a set of horizontal cellular platforms and severely truncating the expansion. The resulting system of partial differential equations, referred to as the anelastic modal equations, is outlined along with suggested boundary conditions and techniques for solving the equations. Ways of assessing the overall validity of the present treatment are discussed.

Latour, J.↗
NASA NTRS1980

A note on sound radiation into a uniformly flowing medium

The influence of a uniform cross flow on the power output from an idealized mechanical source, namely a vibrating strip set in a coplanar rigid wall, is studied within the framework of linear acoustic theory, and the time-average power output is characterized by appropriate expansions (of exact integral representations), for both small and large wave length/strip width ratios, in the subsonic flow regime. Since boundary layers are ignored, the model source envisaged furnishes only a limited accounting of fluid-acoustical coupling effects.

Levine, H.↗
NASA NTRS1988

Hydrogen turbines for space power systems: A simplified axial flow gas turbine model

Hydrogen cooled, turbine powered space weapon systems require a relatively simple, but reasonably accurate hydrogen gas expansion turbine model. Such a simplified turbine model would require little computational time and allow incorporation into system level computer programs while providing reasonably accurate volume/mass estimates. This model would then allow optimization studies to be performed on multiparameter space power systems and provide improved turbine mass and size estimates for the various operating conditions (when compared to empirical and power law approaches). An axial flow gas expansion turbine model was developed for these reasons and is in use as a comparative bench mark in space power system studies at Sandia. The turbine model is based on fluid dynamic, thermodynamic, and material strength considerations, but is considered simplified because it does not account for design details such as boundary layer effects, shock waves, turbulence, stress concentrations, and seal leakage. Although the basic principles presented here apply to any gas or vapor axial flow turbine, hydrogen turbines are discussed because of their immense importance on space burst power platforms.

Hudson, Steven L.↗