Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “first principles calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ferroelectricity in boron-substituted aluminum nitride thin films

This manuscript demonstrates ferroelectricity in B-substituted AlN thin films and a complementary set of first-principles calculations to understand their structure-property relationships. Al 1–x B x N films are grown by dual-cathode reactive magnetron sputtering on (110)W/(001)Al 2 O 3 substrates at 300°C at compositions spanning x = 0 to x = 0.20. X-ray diffraction studies indicate a decrease in both the c and a lattice parameters with increasing B concentration, resulting in a decrease in unit cell volume and a constant c/a axial ratio of 1.60 over this composition range. Films with 0.02 ≤ x ≤ 0.15 display ferroelectric switching with remanent polarizations exceeding 125 μCcm –2 while maintaining band gap energies of > 5.2eV. The large band gap allows low frequency hysteresis measurement (200 Hz) with modest leakage contributions. At B concentrations of x > 0.15, c-axis orientation deteriorates and ferroelectric behavior is degraded. Furthermore, density-functional theory calculations corroborate the structural observations and provide predictions for the wurtzite u parameter, polarization reversal magnitudes, and composition-dependent coercive fields.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Vibrational properties and thermal transport in quaternary chalcogenides: The case of Te-based compositions

Vibrational thermal properties of CuZn 2 InTe 4 , AgZn 2 InTe 4 , and Cu 2 CdSnTe 4 , derived from binary II-VI zinc-blendes, are reported based on first-principles calculations. While the chalcogenide atoms in these materials have the same lattice positions, the cation atom arrangements vary, resulting in different crystal symmetries and subsequent properties. The compositional differences have important effects on the vibrational thermal characteristics of the studied materials, which demonstrate that low-frequency optical phonons hybridize with acoustic phonons and lead to enhanced phonon-phonon scattering and low lattice thermal conductivities. The phonon density of states, mode Grüneisen parameters, and phonon scattering rates are also calculated, enabling deeper insight into the microscopic thermal conduction processes in these materials. Compositional variations drive differences among the three materials considered here; nonetheless, their structural similarities and generally low thermal conductivities (0.5–4 W/m K at room temperature) suggest that other similar II-VI zinc-blende derived materials will also exhibit similarly low values, as also corroborated by experimental data. Finally, this, combined with the versatility in designing a variety of motifs on the overall structure, makes quaternary chalcogenides interesting for thermal management and energy conversion applications that require low thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spirals and skyrmions in antiferromagnetic triangular lattices

In this work, we study realizations of spirals and skyrmions in two-dimensional antiferromagnets with a triangular lattice on an inversion-symmetry-breaking substrate. As a possible material realization, we investigate the adsorption of transition-metal atoms (Cr, Mn, Fe, or Co) on a monolayer of MoS 2 , WS 2 , or WSe 2 and obtain the exchange, anisotropy, and Dzyaloshinskii-Moriya interaction parameters using first-principles calculations. Using energy minimization and parallel-tempering Monte Carlo simulations, we determine the magnetic phase diagrams for a wide range of interaction parameters. We find that skyrmion lattices can appear even with weak Dzyaloshinskii-Moriya interactions, but their stability is hindered by magnetic anisotropy. However, a weak easy plane magnetic anisotropy can be beneficial for stabilizing the skyrmion phase. Our results suggest that Cr/MoS 2 , Fe/MoS 2 , and Fe/WSe 2 interfaces can host spin spirals formed from the 120 degrees antiferromagnetic states. Our results further suggest that for interfaces, such as Fe/MoS 2 , the Dzyaloshinskii-Moriya interaction is strong enough to drive the system into a three-sublattice skyrmion lattice in the presence of experimentally feasible external magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Theoretical and experimental study of the nitrogen-vacancy center in 4H-SiC.

Using first-principles calculations and magnetic resonance experiments, we investigated the physical properties of the negatively charged nitrogen-vacancy (NV) center in 4H-SiC, a promising spin qubit. Our predictive theoretical model in conjunction with experimental measurements reveals a large sensitivity to strain and symmetry. The measured and computed zero-phonon lines (ZPLs) are in agreement and show a consistent trend as a function of the defect location in the crystal. The computed ZPLs are extremely sensitive to the geometrical configurations of the ground and excited states, and large supercells with more than 2 000 atoms are required to obtain accurate numerical results. We find that the computed decoherence time of the basal NV centers at zero magnetic field is substantially larger than that of the axial configurations. Furthermore, at natural nuclear spin abundance and zero field, the Hahn-echo coherence time of one of the basal configurations is similar to that of the axial divacancy in isotopically purified SiC.

Zhu, Yizhi↗
DOE OSTI2021

Tuning the critical Li intercalation concentrations for MoX 2 (X = S, Se, or Te) bilayer phase transitions

Transition metal dichalcogenides (TMDs), such as MoS 2 , are known to undergo a structural phase transformation as well as a change in the electronic conductivity upon Li intercalation. These properties make them candidates for charge-tunable ion-insertion materials that could be used in electro-chemical devices. In this work we study the phase stability and electronic structure of H and T’ Li-intercalated MoX 2 bilayers with X=S, Se, or Te. Here, using first-principles calculations in combination with classical and machine learning modeling approaches, we find that the H phase is more stable at low Li concentration for all X, and the critical Li concentration at which the T’→H transition occurs decreases with increasing mass of X. Furthermore the relative free energy of the two phases becomes less sensitive to Li insertion with increasing atomic mass of the chalcogen atom X. While the electronic conductivity increases with increasing ion concentration at low concentrations, we do not observe a (positive) conductivity jump at the phase transition from H to T’.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Helical versus collinear antiferromagnetic order tuned by magnetic anisotropy in polar and chiral (Ni,Mn) 3 TeO 6

In this work, polar and chiral Ni 3 TeO 6 was found to exhibit a colossal magnetoelectric (ME) effect associated with collinear antiferromagnetic order. We have investigated the evolution of its magnetic state with the substitution of the Ni 2+ spins by isotropic Mn 2+ spins, namely (Ni, Mn) 3 TeO 6 (NMTO). The ground state of NMTO maintains an Ising nature, but a new phase with XY-type magnetic anisotropy is discovered at an intermediate temperature range. Neutron powder diffraction experiments reveal that (1) Mn ions tend to occupy a specific transition-metal site, consistent with the first-principle calculation, and (2) the intermediate phase is an incommensurate (IC) helical magnetic state propagating along the $\textit{c}$ axis with $\vec q_{\text{IC}}$ = (0, 0, 1.5 ± δ). We also found that the balance between these two magnetic states can be readily manipulated with magnetic fields, which results in significant ME effects. This selective site occupancy of NMTO allows for a unique competition between collinear and helical magnetic structures with minimal chemical disorder. Thus, NMTO serves as a model system to study site-specific chemical control of noncollinear magnetism and ME coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Defect chemistry of Cr-B binary and Cr-Al-B MAB phases: Effects of covalently bonded B networks

Transition metal borides, which are three-dimensional (3D) layered materials containing covalently bonded B networks, have shown a number of excellent properties, such as radiation resistance and the ability to act as a diffusion barrier in integrated circuits. However, defect behavior, which controls many of the materials’ properties, has remained unknown in these materials. In this work, we investigate the effects of the B networks on the defect chemistry in both binary borides (CrB, Cr 3 B 4 , Cr 2 B 3 ) and ternary MAB phases (Cr 2 AlB 2 , Cr 3 AlB 4 , Cr 4 AlB 6 ) using first-principles calculations. We find that increasing the number of B rings in the structure leads to lower formation energies and higher concentrations of Frenkel pairs. The results can be explained by the fact that the strongest Cr-B bond is weakened when borides have more B rings, leading to a reduction in the formation energy of Cr and B vacancies. Also, the bonds associated with Cr atoms bonded within B rings are softer in structures containing more B rings, which allows Cr interstitials to form with a lower energy cost and contributes to an increase in the concentration of Cr interstitials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Potential high-performance magnet materials: Co- and Al-alloyed Sm 2 Fe 17

Sm 2 Fe 17 has long been known as a potential high-performance magnet whose deficiencies—planar anisotropy and lower-than-optimal T c —can be remedied by nitrogen addition, but which presents synthesis difficulties. In this work, we apply first-principles calculations to search for alternative low-cost, high-performance permanent magnets in this family, by exploring simultaneous Fe and Al substitution. Specifically, the goal is to improve properties of Sm 2 Fe 14 Al 3 easy-plane magnet at the stoichiometric composition. Density functional theory calculations were executed for three series of compounds, i.e., Sm 2 (Fe 1-x Co x ) 14 Al 3 , Sm 2 (Fe 1-x Co x ) 15 Al 2 , and Sm 2 (Fe 1-x Cox) 16 Al. We find that substitution of Fe with 12–18 of Co in % Sm 2 Fe 14 Al 3 modifies the magnetic anisotropy type from easy plane to easy axis with a substantial anisotropy of 7.1 MJ/m 3 . We also demonstrate that the largest part of magnetic anisotropy is introduced by 4f Sm atom electrons. Thus the rotation of magnetic moment orientation from $\langle$$1\bar10$$\rangle$ to $\langle$111$\rangle$ is followed by an increase of the occupied 4f state number and, as a result, the orbital part of the magnetic moment of one of the Sm atoms. This increase of the occupied 4f state number at an energy ~ -4.3 eV results in a significant reduction of band structure energy. The substitution of Fe by Co does not significantly reduce the magnetization of the compound and keeps it slightly above 1 T. This combination of magnetic anisotropy and magnetization makes the compound a promising candidate for a permanent magnet.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Statistics on magnetic properties of Co compounds: A database-driven method for discovering Co-based ferromagnets

The search for new ferromagnetic compounds is often targeted at known structure families, particularly those containing iron, cobalt, and manganese. Here, we propose a method to expand this search to lesser-known structure types, using a database of experimental Curie and Néel temperatures. This study, in particular, illustrates the case of compounds containing the element cobalt, and we demonstrate how the use of such a database can lead to the discovery of ferromagnetic materials that had previously been overlooked. We report statistics from a literature survey of the magnetic properties of Co-based compounds with more than 33 at. % Co. We classify more than 13 000 compounds by structure type, cobalt content, and magnetic ground state. From these data, compounds TaCo 2 Ga, La 6 Co 13 Bi, and Nd 2 Co 3 were identified as potential ferromagnets, and we confirm their ferromagnetic ordering theoretically via first-principles calculations and experimentally via synthesis and characterization measurements. In addition, the analysis is focused on the collection of data trends and discovery of ferromagnetic materials with easy-axis magnetic anisotropy. Both known ferromagnetic materials with unknown magnetic anisotropy, and unstudied compounds were considered. From the subset of known ferromagnets with unknown anisotropy, the compound Co 2 Mg was synthesized, characterized, and determined to have easy-axis magnetic anisotropy at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Native and radiation induced point defects in AlN and Sc-doped AlN

Herein, we have performed first-principles calculations to investigate the electronic structure, configurations, formation, and binding energies of native and radiation induced point defects in pristine and Sc-doped wurtzite AlN. For the native defects, the nitrogen vacancy has the lowest formation energy in p-type material while the aluminum vacancy has the lowest formation energy in n-type material which is consistent with the previous studies. Several interstitial defect structures were modeled for Al, N, and Sc atoms. The effects of charge state on their relative stability were investigated. The binding energy of Sc with point defects was calculated and found to be dependent strongly on the defect type and charge state. The results obtained are discussed in light of the possible Sc effects on the radiation damage evolution in AlN. Thus the attraction of Sc atom to N vacancy and both Al and N interstitials reduces their mobility and increases Frenkel pair recombination distance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Observation of multiple nodal lines in SmSbTe

Having been a ground for various topological fermionic phases, the family of ZrSiS-type 111 materials has been under experimental and theoretical investigations. Within this family of materials, the subfamily LnSbTe (Ln = lanthanide elements) is gaining interest in recent times as the strong correlation effects and magnetism arising from the 4f electrons of the lanthanides can provide an important platform to study the link between topology, magnetism, and correlation. In this Letter, we report the systematic study of the electronic structure of SmSbTe—a member of the Ln SbTe subfamily—by utilizing angle-resolved photoemission spectroscopy in conjunction with first-principles calculations, transport, and magnetic measurements. Our experimental results identify multiple Dirac nodes forming the nodal lines along the Γ–X and Z–R directions in the bulk Brillouin zone (BZ) as predicted by our theoretical calculations. Additionally, a surface Dirac-like state is also observed at the X point of the surface BZ. Our study highlights SmSbTe as a promising candidate to understand the topological electronic structure of LnSbTe materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Polarons and electrical leakage in BaZrO 3 and BaCeO 3

The proton conductors barium zirconate (BaZrO 3 , or BZO), barium cerate (BaCeO 3 , or BCO), and their alloys have attracted considerable interest as solid-state electrolytes in solid-oxide fuel and electrolysis cells. However, the reasons for their non-negligible electrical conductivity, which can limit their performance, are not fully understood. To address that question, we use first-principles calculations based on density functional theory to study the properties of hole and electron polarons in BZO and BCO. We confirm that hole polarons form in both materials, slightly more favorably in BCO. Electron polarons, on the other hand, are stable only in BCO and in Ce-containing alloys; in pure BZO, electron polaron states are unfavorable relative to free carriers, though they become accessible when Ce impurities are introduced. In general, doped BZO and BCO will have negligible electron concentrations, but larger concentrations of holes and hole polarons may be present. Avoiding extreme O-rich conditions and limiting dopant concentrations are key strategies for reducing significant p -type electrical leakage. Furthermore, our results provide physical insights into the different electronic behaviors of BZO and BCO, which can be used to optimize their performance as pure ionic conductors.

08 HYDROGEN↗
DOE OSTI2023

Skyrmion formation in Ni-based Janus dihalide monolayers: Interplay between magnetic frustration and Dzyaloshinskii-Moriya interaction

Here we present a comprehensive theory of the magnetic phases in monolayer nickel-based Janus dihalides (NiIBr, NiICl, NiBrCl) through a combination of first-principles calculations and atomistic simulations. Phonon band structure calculations and finite-temperature molecular dynamics simulations show that Ni-dihalide Janus monolayers are stable. The parameters of the interacting spin Hamiltonian extracted from ab initio calculations show that nickel-dihalide Janus monolayers exhibit varying degrees of magnetic frustration together with a large Dzyaloshinskii-Moriya interaction due to their inherent inversion symmetry breaking. The atomistic simulations reveal a delicate interplay between these two competing magnetic interactions in giving rise to skyrmion formation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Band structures and Z 2 invariants of two-dimensional transition metal dichalcogenide monolayers from fully relativistic Dirac-Kohn-Sham theory using Gaussian-type orbitals

Two-dimensional (2D) materials exhibit a wide range of remarkable phenomena, many of which owe their existence to the relativistic spin-orbit coupling (SOC) effects. To understand and predict properties of materials containing heavy elements, such as the transition-metal dichalcogenides (TMDs), relativistic effects must be taken into account in first-principles calculations. We present an all-electron method based on the four-component Dirac Hamiltonian and Gaussian-type orbitals (GTOs) that overcomes complications associated with linear dependencies and ill-conditioned matrices that arise when diffuse functions are included in the basis. Until now, there has been no systematic study of the convergence of GTO basis sets for periodic solids either at the nonrelativistic or the relativistic level. Here, in this study, we provide such a study of relativistic band structures of the 2D TMDs in the hexagonal (2H), tetragonal (1T), and distorted tetragonal (1T') structures, along with a discussion of their SOC-driven properties (Rashba splitting and Z 2 topological invariants). We demonstrate the viability of our approach even when large basis sets with multiple basis functions involving various valence orbitals (denoted triple- and quadruple-ζ) are used in the relativistic regime. Our method does not require the use of pseudopotentials and provides access to all electronic states within the same framework. Our study paves the way for direct studies of material properties, such as the parameters in spin Hamiltonians, that depend heavily on the electron density near atomic nuclei where relativistic and SOC effects are the strongest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Extreme sensitivity of the magnetic ground state to halide composition in FeCl 3 – x Br x

Mixed halide chemistry has recently been utilized to tune the intrinsic magnetic properties of transition-metal halides—one of the largest families of magnetic van der Waals materials. Prior studies have shown that the strength of exchange interactions, hence the critical temperature, can be tuned smoothly with halide composition for a given ground state. Here we show that the ground state itself can be altered by a small change of halide composition in FeCl 3–$x$ Br $x$ . Specifically, we find a threefold jump in the Néel temperature and a sign change in the Weiss temperature at $x$=0.08 corresponding to only 3% bromine doping. Using neutron scattering, we reveal a change of the ground state from spiral order in FeCl 3 to $A$-type antiferromagnetic order in FeBr 3 . From first-principles calculations, we show that a delicate balance between nearest and next-nearest neighbor interactions is responsible for such a transition. In conclusion, these results demonstrate how varying the halide composition can tune the competing interactions and change the ground state of a spiral spin liquid system.

2-dimensional systems↗
DOE OSTI2023

Ultrahigh supercurrent density in a two-dimensional topological material

Ongoing advances in superconductors continue to revolutionize technology thanks to the increasingly versatile and robust availability of lossless supercurrents. In particular, high supercurrent density can lead to more efficient and compact power transmission lines, high-field magnets, as well as high-performance nanoscale radiation detectors and superconducting spintronics. In this work, we report the discovery of an unprecedentedly high superconducting critical current density (17 MA / cm 2 at 0 T and 7 MA / cm 2 at 8 T) in 1T'–WS 2 , exceeding those of all reported two-dimensional superconductors to date. 1T'–WS 2 features a strongly anisotropic (both in- and out-of-plane) superconducting state that violates the Pauli paramagnetic limit signaling the presence of unconventional superconductivity. Spectroscopic imaging of the vortices further substantiates the anisotropic nature of the superconducting state. More intriguingly, the normal state of 1T'–WS 2 carries topological properties. The band structure obtained via angle-resolved photoemission spectroscopy and first-principles calculations points to a Z 2 topological invariant. The concomitance of topology and superconductivity in 1T'–WS 2 establishes it as a topological superconductor candidate, which is promising for the development of quantum computing technology.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Correlated anharmonicity and dynamic disorder control carrier transport in halide perovskites

Halide pervoskites are an important class of semiconducting materials that hold great promise for optoelectronic applications. In this work we investigate the relationship between vibrational anharmonicity and dynamic disorder in this class of solids. Via a multiscale model parametrized from first-principles calculations, we demonstrate that the non-Gaussian lattice motion in halide perovskites is microscopically connected to the dynamic disorder of overlap fluctuations among electronic states. This connection allows us to rationalize the emergent differences in temperature-dependent mobilities of prototypical MAPbI 3 and MAPbBr 3 compounds across structural phase transitions, in agreement with experimental findings. In conclusion, our analysis suggests that the details of vibrational anharmonicity and dynamic disorder can complement known predictors of electronic conductivity and can provide structure-property guidelines for the tuning of carrier transport characteristics in anharmonic semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermoelectric properties of SnSe and SnSe 2 single crystals

Thermoelectric materials can serve for conversion between thermal and electrical energy. In the search for new thermoelectric materials, layered SnSe and SnSe 2 are promising candidates. Here we have successfully synthesized SnSe and SnSe 2 single crystals by the modified Bridgman method and studied their thermoelectric properties: thermopower (S), thermal conductivity (κ), and electrical conductivity (σ) in the temperature range between 2 K and 400 K, which are absent in the literature. In particular, the kink observed in the thermopower corresponds to the metallic-nonmetallic crossover temperature for both SnSe and SnSe 2 , reflecting their inherent electronic nature. Compared to SnSe 2 above 100 K, we find that SnSe exhibits higher electrical conductivity, higher thermopower, and lower thermal conductivity, thus resulting in the higher figure of merit. Hall effect measurements reveal that the Hall mobility in SnSe is an order higher than that in SnSe 2 , advancing its thermoelectric performance. These experimental results are supported by first principles calculations, which indicate that the inequivalent Sn-Se bonding lengths help improve the figure of merit of SnSe.

36 MATERIALS SCIENCE↗