Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “field test”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electric current paths in a Si:P delta-doped device imaged by nitrogen-vacancy diamond magnetic microscopy

The recently-developed ability to control phosphorous-doping of silicon at an atomic level using scanning tunneling microscopy, a technique known as atomic precision advanced manufacturing (APAM), has allowed us to tailor electronic devices with atomic precision, and thus has emerged as a way to explore new possibilities in Si electronics. In these applications, critical questions include where current flow is actually occurring in or near APAM structures as well as whether leakage currents are present. In general, detection and mapping of current flow in APAM structures are valuable diagnostic tools to obtain reliable devices in digital-enhanced applications. In this report, we used nitrogen-vacancy (NV) centers in diamond for wide-field magnetic imaging (with a few-mm field of view and micron-scale resolution) of magnetic fields from surface currents flowing in an APAM test device made of a P delta-doped layer on a Si substrate, a standard APAM witness material. We integrated a diamond having a surface NV ensemble with the device (patterned in two parallel mm-sized ribbons), then mapped the magnetic field from the DC current injected in the APAM device in a home-built NV wide-field microscope. The 2D magnetic field maps were used to reconstruct the surface current densities, allowing us to obtain information on current paths, device failures such as choke points where current flow is impeded, and current leakages outside the APAM-defined P-doped regions. Analysis on the current density reconstructed map showed a projected sensitivity of ~0.03 A m -1 , corresponding to a smallest-detectable current in the 200 μm wide APAM ribbon of ~6 μA. These results demonstrate the failure analysis capability of NV wide-field magnetometry for APAM materials, opening the possibility to investigate other cutting-edge microelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Experimental demonstration and analysis of random field effects in ferromagnet/antiferromagnet bilayers

More than 30 years ago, Malozemoff [Phys. Rev. B 35, 3679 (1987)] hypothesized that exchange interaction at the interface between a ferromagnet (F) and an antiferromagnet (AF) can act as an effective random field, which can profoundly affect the magnetic properties of the system. However, until now this hypothesis has not been directly experimentally tested. We utilize magnetoelectronic measurements to analyze the effective exchange fields at permalloy/CoO interface. Our results cannot be explained in terms of quasiuniform effective exchange fields but are in agreement with the random-field hypothesis of Malozemoff. Finally, the presented approach opens a new route for the quantitative analysis of effective exchange fields and anisotropies in magnetic heterostructures for memory, sensing and computing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electromagnetic Shielding Design for 200 kW Stationary Wireless Charging of Light-Duty EV

Wireless power transfer (WPT) is a developing technology with the advantage of convenience and flexible charging. SAE recommended practice J2954 defines typical size and geometry with aluminum or ferrite plate shielding to limit leakage electromagnetic (EM) fields for WPT with power levels lower than 22 kVA from the input side. However, as the WPT power goes up to 100- or 200-kW level, EM safety surrounding the WPT becomes a critical concern. To address this oncoming safety challenge, a novel ferrite shielding design is proposed in this paper. Different misalignment scenarios in accordance with definitions in SAE J2954 are also taken into consideration to ensure EM safety under various operation scenarios. Simulation results, which are preliminarily verified by magnetic field measurements at 1.1 m from the center of the vehicle side coil under 100 kW operation, indicate that the magnetic field leakage can be maintained below the limits defined in SAE J2954 for 200 kW operation. A 3.3 kW scale-down test was also carried out and compared to parallel scale-down simulations. 26.8% field emission reduction is observed from the scale-down test, which supports the effectiveness of the proposed shielding design.

25 ENERGY STORAGE↗
DOE OSTI2024

ATLAS-MAP: An Automated Test Station for Gated Electronic Transport Measurements

The diversification of electronic materials in devices provides a strong incentive for methods to rapidly correlate device performance with fabrication decisions. In this work, we present a low-cost automated test station for gated electronic transport measurements of field-effect transistors. Utilizing open-source PyMeasure libraries for transparent instrument control, the “ATLAS-MAP” system serves as a customizable interface between sourcemeters and samples under test and is programmed to conduct transfer curve and van der Pauw methods with static and sweeping gate voltages. Zinc oxide transistors of variable thickness (5, 10, and 20 nm) and channel size (50 μm to 3 mm, of equal length and width) were fabricated to validate the design. Standardization of testing procedures and raw data formatting enabled automated data analysis. A detailed list of parts and code files for the system are provided.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A precision test of averaging in AdS/CFT

We reconsider the role of wormholes in the AdS/CFT correspondence. We focus on Euclidean wormholes that connect two asymptotically AdS or hyperbolic regions with $\mathbb{S}$ 1 × $\mathbb{S}$ d-1 boundary. There is no solution to Einstein’s equations of this sort, as the wormholes possess a modulus that runs to infinity. To find on-shell wormholes we must stabilize this modulus, which we can do by fixing the total energy on the two boundaries. Such a wormhole gives the saddle point approximation to a non-standard problem in quantum gravity, where we fix two asymptotic boundaries and constrain the common energy. Crucially the dual quantity does not factorize even when the bulk is dual to a single CFT, on account of the fixed energy constraint. From this quantity we extract a smeared version of the microcanonical spectral form factor. For a chaotic theory this quantity is self-averaging, i.e. well-approximated by averaging over energy windows, or over coupling constants. We go on to give a precision test involving the microcanonical spectral form factor where the two replicas have slightly different coupling constants. In chaotic theories this form factor is known to smoothly decay at a rate universally predicted in terms of one replica physics, provided that there is an average either over a window or over couplings. We compute the expected decay rate for holographic theories, and the form factor from a wormhole, and the two exactly agree for a wide range of two-derivative effective field theories in AdS. This gives a precision test of averaging in AdS/CFT. Our results interpret a number of confusing facts about wormholes and factorization in AdS and suggest that we should regard gravitational effective field theory as a mesoscopic description, analogous to semiclassical mesoscopic descriptions of quantum chaotic systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Effects of magnetic field assisted heat treatment on the microstructure and mechanical properties of Fe-0.63 %C alloy

This study investigates the influence of an applied magnetic field on the microstructural evolution and mechanical properties of hypoeutectoid steels subjected to heat treatment. Tensile tests and microstructural analysis were performed on samples processed under varying magnetic field strengths (0 T, 5 T, and 9 T) and different austenitization incubation times. The results indicate that the application of a magnetic field alters the fraction of proeutectoid ferrite phase without changing the cooling rates and heat treatment process. Additionally, pearlite microstructural features such as lamellar spacing and misorientation angles exhibit variations under different field strengths. While the pearlite nodule diameter remains largely unaffected, an increase in percentage elongation and strength is observed in the 5 T treated sample, attributed to changes in microstructural features with the magnetic field. Additionally, the percentage elongation is reduced in the samples heat treated with reduced austenitization incubation times. The study further demonstrates that low-angle misorientations increased in the samples taken parallel to the magnetic field direction, influencing the mechanical response. These findings suggest that applying a magnetic field during heat treatment provides an additional driving force for phase transformations, offering a manufacturing process for tailoring microstructures and optimizing mechanical properties. Moreover, integrating magnetic fields in heat treatment processes has potential benefits in energy efficiency.

High magnetic field↗
DOE OSTI2023

A spatially regularized detector for emergent/re-emergent disease outbreaks

Early detection of outbreaks caused by emergent pathogens, using epidemiological surveillance data i.e., daily case counts, is difficult. This is because the data tend to be noisy during the early epoch of the outbreak. In contrast, the spread-rate of the disease tends to be well-behaved, as it depends only on the mixing patterns of the population and the characteristics of the pathogen, neither of which behave erratically in space-time. In this report, we explore whether the spread-rate can be used for epidemiological surveillance, conditional on case count data. Estimating the spread-rate from case count data allows us to exploit exogenous information, e.g., incubation period distributions etc., which can considerably smooth out any erratic temporal behavior. Further, epidemiological dynamics are spatially correlated, and if case counts are available for multiple areal units e.g., counties, these correlations could potentially be used to suppress noise in the early epoch data. These exogenous information and structure are not exploited by conventional syndromic surveillance detectors to extract a well-behaved latent variable for monitoring purposes. The technical challenge lies in the estimation of the spread-rate field jointly over a collection of areal units; further, the spread-rate varies over time. We develop a method based on mean-field variational inference to approximately estimate the spread-rate field, using a Gaussian Random Field Model for spatial regularization. The method is tested on the estimation of spread-rate in the thirty-three counties of New Mexico and detect the arrival of the Fall 2020 COVID-19 wave in September 2020. We find that the method is scalable, but underestimates the uncertainty in the estimated spread-rate field. We detect the arrival of the Fall 2020 wave a week ahead of conventional syndromic surveillance algorithms, but our simplistic detection algorithm, based on simple anomaly detection, suffers from a high false positive rate, similar to conventional detectors.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Impact of Rheology Models on Horizontal Well Polymer Flooding in a Heavy Oil Reservoir on Alaska North Slope: A Simulation Study

Polymer rheology can have either a positive or a negative effect on polymer flooding performance under varied circumstances. Many researchers have studied the effect of polymer rheology in a vertical well, but no field scale studies have been conducted to investigate whether polymer rheology is beneficial to polymer flooding in heavy oil reservoirs developed by horizontal wells. In this paper, we conducted a numerical simulation study to examine the effect of HPAM polymer rheology on a polymer flooding pilot, which is the first-ever project conducted on a heavy oil reservoir from Alaska North Slope (ANS) developed by horizontal wells. Three rheology types were considered in the study including the apparent viscosity measured during coreflooding of using a HPAM polymer, the bulk viscosity measured with a viscometer, and a Newtonian flow model. The results suggest that using the bulk viscosity in simulation underestimates the conformance control and the water-oil-ratio reduction capability of the HPAM polymer solution. When the apparent viscosity is used, the incremental oil and sweep were largely increased, and the optimal recovery period of polymer flooding was extended greatly, especially for the heterogeneous formations. Therefore, the rheology type of polymer plays a significant role in the incremental oil recovery and injection profile of the horizontal well system given the pilot test conditions. This study has provided practical guidance to field operators for the ongoing polymer flooding pilot on ANS and will also provide valuable information for other polymer projects conducted in similar conditions.

Leng, Jianqiao↗
DOE OSTI2025

Improved Treatment of 1–4 Interactions in Force Fields for Molecular Dynamics Simulations

Traditional force fields commonly use a combination of bonded torsional terms and empirically scaled nonbonded interactions to capture 1-4 energies and forces of atoms separated by three bonds in a molecule. While this approach can yield accurate torsional energy barriers, it often leads to inaccurate forces and erroneous geometries and creates an interdependence between dihedral terms and nonbonded interactions, complicating parametrization and reducing transferability. Here, in this paper, we demonstrate that 1-4 interactions can be accurately modeled using only bonded coupling terms, eliminating the need for arbitrarily scaled nonbonded interactions altogether. Furthermore, by leveraging the automated parametrization capabilities of the Q-Force toolkit, we efficiently determine the necessary coupling terms without the need for manual adjustment. Our approach is first validated on a range of small molecule systems, encompassing both flexible and rigid structures, and shows a significant improvement in force field accuracy, obtaining subkcal/mol mean absolute error for every molecule tested. We further extend the bonded-only model for 1-4 interactions to Amber ff14sb, CHARMM36, and OPLS-AA force fields to reproduce ab initio gas and implicit solvent ϕ,ψ surfaces of alanine dipeptide.

Abdullah, Aalim S. [University of California, Berk↗
DOE OSTI2023

On Distribution Grid Optimal Power Flow Development and Integration

Due to changes in electric distribution grid operation, new operation regimes have been recommended. Distribution grid optimal power flow (DOPF) has received tremendous attention in the research community, yet it has not been fully adopted across the utility industry. Our paper recognizes this problem and suggests a development and integration procedure for DOPF. We propose development of DOPF as a three step procedure of 1) processing the grid, 2) obtaining a tractable solution, and 3) implementing multiple solution algorithms and benchmarking them to improve application reliability. For the integration of DOPF, we demonstrate how a DOPF federate may be developed that can be integrated in a co-simulation environment to mimic the real-world conditions and hence improve its practicality to be deployed in the field. To demonstrate the efficacy of the proposed methods, tests on IEEE 123 bus system are performed where the usage of tractable formulation in DOPF algorithm development and its comparison to the benchmark solution are demonstrated.

Hanif, Sarmad↗
DOE OSTI2020

10° off-axis testing of CFRP using DIC: A study on strength, strain and modulus

For the determination of the shear properties such as strength, strain and modulus of unidirectionally reinforced composites, nearly a dozen measurement techniques exist, several of which have found their way into standards. One non-standardized method for sheet materials is the 10° off-axis tensile test of unidirectional coupons. The current work focuses on the experimental investigation of tensile testing of CFRP-UD coupon specimens using the 10° off-axis test and DIC strain mapping to measure the full-field deformation response. A sensitivity analysis on the measured stresses, strains and moduli is performed by varying the aspect ratio of the specimens and the location of strain measurement. Test related uncertainties such as the loading angle and specimen preparation details are investigated and quantified with the help of these full-field DIC measurements.

42 ENGINEERING↗
DOE OSTI2024

Artificial Replication of Field Soiling Losses on PV Modules

In this paper, we experimentally demonstrate an improved replication of field soiling losses using an indoor artificial soiling chamber and tests on anti-soiling coated PV modules and coupons. The primary focus is to use site-specific soil collected from module surface and replicate the natural soiling processes including dust concentration in the air, slow and gradual dust accumulation and sedimentation on the module surface during the dominant soiling season of the site of interest. The experiments were conducted on two sample sets having different anti-soiling properties. The first set contains commercial modules with two different surface properties retrieved after three years of exposure from a single PV plant in a mid-Atlantic location; the other set contain glass coupons with three different coating materials that were installed and exposed over 4 months, at Lemoore, California. Major field-representative factors considered here for the close replication in the chamber include: the use of dust collected from modules surfaces at the outdoor sites to give the same dust chemistry; dust particle size distribution and concentration; the charge size of dust (< 0.15 g per injection); field humidity, and module temperature. The effectiveness of antisoiling coatings (or surface properties) for both sample sets were ranked in the artificial testing and were found to be closely matching with the field rank orders of the respective sites and sample sets. This paper provides the rank ordering results to objectively demonstrate the replication of field soiling losses in the artificial soiling chamber.

artificial soiling↗
DOE OSTI2022

GOOML - Real World Applications of Machine Learning in Geothermal Operations

GOOML (Geothermal Operational Optimization with Machine Learning) is a machine-learning based framework that enables geothermal power plant operators to explore optimization opportunities for their assets in an efficient and robust digital environment. Backed by real-world data sources, thermodynamic constraints and steamfield intelligence, the GOOML environment provides new tools to explore how to best operate steamfields as well as test new scenarios and configurations prior to implementation in the field. To prove the effectiveness of GOOML, we have undertaken optimization experiments using reinforcement learning (RL) to generate operational suggestions using a balance of mass-take targets, sustainability considerations and net generation. Our experiments use the GOOML construct to explore different field parameters and perform multiple reinforcement learning experiments. Like a comprehensive laboratory workbench, we can change out components of a steamfield to perform testing under a variety of conditions (restrict mass, increase pressure, reroute steam, etc.). This flexibility allows us to explore conditions that would require significant infrastructure changes in a real-world setting at a fraction of the cost and time in a digital environment. The results highlight the benefits of using digital twins and advanced data analytics for the geothermal industry.

forecasting↗
DOE OSTI2020

Multi-Physics Simulations of Molten Chloride Fast Reactor using Nek5000 and PROTEUS-NODAL

This report documents the FY20 work to demonstrate a specific multi-physics capability within NEAMS tools to model molten chloride fast reactors (MCFR). Specifically, the CFD code Nek5000 and the neutronics code PROTEUS-NODAL were coupled off-line to calculate the delayed neutron precursor distribution within the flowing fuel salts in an MCFR core. An MCFR benchmark problem and a 3D test problem based on a conceptual MSR design were successfully solved through the coupled simulation of Nek5000 and PROTEUS-NODAL. In the coupled simulations for these test problems, Nek5000 provided high-quality flow field information, and PROTEUS-NODAL performed the neutron diffusion calculation along with the precursor drift model. The impact of precursor drift on the core status was also investigated. Additionally, the precursor drift model implemented in PROTEUS-NODAL was verified by making use of the reference precursor distribution generated from Nek5000. Results of these test problems suggest that the multi-physics capability of Nek5000 and PROTEUS-NODAL was properly developed for tracking delayed neutron precursor drift.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Approximate inverse-based block preconditioners in poroelasticity

We focus on the fully implicit solution of the linear systems arising from a three-field mixed finite element approximation of Biot’s poroleasticity equations. The objective is to develop algebraic block preconditioners for the efficient solution of such systems by Krylov subspace methods. In this work, we investigate the use of approximate inverse-based techniques to decouple the native system of equations and obtain explicit sparse approximations of the Schur complements related to the physics-based partitioning of the unknowns by field type. Here, the proposed methods are tested in various numerical experiments including real-world applications dealing with petroleum and geotechnical engineering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Characterization of PIPS detectors for measurement of radioxenon

The International Monitoring System arm of the Comprehensive Nuclear-Test-Ban Treaty Organization utilizes sampling of atmospheric radioxenon to scan the world for nuclear testing events. Current designs utilized in the field involve plastic scintillator cells run in coincidence with Sodium Iodide (NaI) or High Purity Germanium (HPGe) detectors. The use of plastic scintillators as electron detectors exhibit some issues in comparison to other materials. Silicon detectors are analyzed as an alternative to plastic scintillators for beta detection based on their higher energy resolution and lowered memory effect. A radioxenon detection setup was created with the intent of measuring radioxenon samples using coincidence counting between silicon and NaI detectors as well as silicon and HPGe. Finally, the absolute efficiency of both setups is calculated and compared.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Solvation Structure of Methanol-in-Salt Electrolyte Revealed by Small-Angle X-ray Scattering and Simulations

The solvation structure of water-in-salt electrolytes was thoroughly studied, and two competing structures—anion solvated structure and anion network—were well-defined in recent publications. To further reveal the solvation structure in those highly concentrated electrolytes, particularly the influence of solvent, methanol was chosen as the solvent for this proposed study. In this work, small-angle X-ray scattering, small-angle neutron scattering, Fourier-transform infrared spectroscopy, and Raman spectroscopy were utilized to obtain the global and local structural information. With the concentration increment, the anion network formed by TFSI - became the dominant structure. Meanwhile, the hydrogen bonds among methanol were interrupted by the TFSI - anion and formed a new connection with them. Further, molecular dynamic simulations with two different force fields (GAFF and OPLS-AA) are tested, and GAFF agreed with synchrotron small-angle X-ray scattering/wide-angle X-ray scattering (SAXS/WAXS) results well and provided insightful information about molecular/ion scale solvation structure. This article not only deepens the understanding of the solvation structure in highly concentrated solutions, but more importantly, it provides additional strong evidence for utilizing SAXS/WAXS to validate molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗