Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feedstock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Plasma Assisted Trash Conversion with CO2 Carrier Gas

A sub-atmospheric plasma solid-to-gas conversion system operating under 500 W was tested to be viable for waste conversion to a gaseous state without the use of a feedstock gas as shown in previous plasma torch works. This manuscript lays the groundwork into the feasibility of low-pressure solid-to-gas conversion, reaction chemistry of the by-product gases, and power consumption. The results have shown the possibility of gasification at reduced pressures without the consumable use of a feedstock carrier gas in previous studies. Thus far, the percent gasification averaged around 36% in pre-pellet trials, with the system being far from optimized. The products include H2, CO2, CO, C2H4, and C2H6. Hydrogen production was higher as expected in a CO2-like environment once the gasification process begins. The energy required to generate the plasma was on the order of that previously reported at atmospheric pressures. The ability to eliminate the need for any consumables that were required in previous iterations greatly improves the cost and operational logistics of plasma gasification equipment. Although further development of the system is needed for increased gasification percentages, elimination of useable commodities greatly favors such a system for trash management beyond low Earth orbit.

Malay Shah↗
NASA NTRSDate not supplied

In Situ Resource Utilization (ISRU) Envisioned Future Priorities

The National Aeronautics and Space Administration (NASA) of the United States of America (US) has initiated the Artemis Moon to Mars program to send astronauts (the first woman and person of color) back to the lunar surface, create a sustainable human lunar exploration program, and lead the first human exploration mission to the Mars surface in the 2030’s. A major objective of this program is to characterize the resources that exist on the Moon and Mars, and learn how to utilize them for sustained and affordable exploration. Commonly known as In Situ Resource Utilization (ISRU), the search for, acquisition, and processing of resources in space has the potential to greatly reduce the dependency on transporting mission consumables and infrastructure from Earth, thereby reducing mission costs, risks, and dependency on Earth. Through the extraction and processing of resources into mission commodities such as rocket propellants, life support consumables, and fuel cell reactants, ISRU enhances and evolves the cis-lunar, lander, and surface transportation systems required for human exploration; expanding and ehancing HOW humans get to, explore, and return from the Moon. Through the extraction and processing of resources into metals, silicon, and other manufacturing and construction feedstock, ISRU enhances and allows for the expansion of critical infrastructure through in situ manufacturing and construction capabilities needed for WHAT humans do on the Moon and in cis-lunar space. Because of this, ISRU supports and enables commercial involvement beyond NASA and governmental agencies by both lowering the cost of sustained transportation to/from/on the Moon as well as supporting the market required for needing these transportation systems. To achieve this vision, NASA’s Space Technology Mission Directorate (STMD) ensures the coordinated development of ISRU and other critical space and surface infrastructure elements such as propulsion, power, manufacturing, construction, and robotics through the Strategic Technology Architecture Roundtable (STAR) process. Through STAR, an integrated framework and process has been created allowing for capabilities and technologies to be linked and assessed, gaps to be identified, specifications and metrics to be established, and provide a means to prioritize and implement technology development and missions. For lunar ISRU, three primary areas of development have been initiated, (1) understanding, mapping, extracting, and processing water and other volatiles found in polar permanently shadowed regions (PSRs), (2) methods, technologies to extract oxygen from regolith, and (3) methods, technologies, and use cases for metals, silicon, and other feedstock commodities extracted and produced from lunar resources. This presentation will briefly discuss the STAR process and elaborate on the current status and future plans for ISRU development, demonstration, and architecture implementation of NASA’s Envisioned Future Priorities plan for ISRU.

In Situ Resource Utilization↗
NASA NTRSDate not supplied

Playing with DIRT: Building the Framework for a Comprehensive In-Situ Soil Materials Testing Database

Long-term, sustainable planetary exploration will require the ability to "live off the land," relying on In-Situ Resource Utilization (ISRU) and In-Situ Construction as core capabilities. Reduction of both risk and launch mass for lunar construction will require evaluating and comparing regolith materials for use as feedstocks suitable for in-situ beneficiation and fabrication of building components. These material assessment capabilities will inform lunar infrastructure design decisions, with co-benefits for terrestrial construction using in-situ materials. Current planetary construction technology development relies on lunar mapping and orbital data, Apollo-era sample analyses, current simulant inventories, and tests conducted using analog site soils. Requirements for lunar infrastructure design decisions and construction systems will be determined based on specific environmental conditions, mission architectures, and the materials available within traverse range of lunar feedstock processing depots. Critical for success is the capability to identify, evaluate and make effective use of a wide range of materials as they are found in-situ on the lunar surface. This paper discusses the development of a digital repository for data on soil and regolith properties, beginning with their structural performance in both cementitious and non-cementitious building material formulations. The Database for In-situ Resource Testing (DIRT) compiles a catalog of raw materials, additives, and formulations, with notations pertaining to material sources and preparation techniques entered via a web-based user interface. Design of consistent data schemas for site-sourced materials evaluation will facilitate linkage with relevant terrestrial and planetary materials databases while enabling guided data input via templates for participation by broader groups of collaborators. Results of these analyses are compiled in a centralized repository to generate insights applicable for regolith resources and landing sites yet to be precisely defined. Collection of thorough records of material characteristics, applications and performance will support innovative construction solutions not only for space infrastructure but for sustainable, resilient design in the terrestrial built environment.

Sarah Joey Seitz↗
NASA NTRSDate not supplied

ICEE: Next Generation Exobiology and Astrobiology Studies

The presence of organic molecules, from simple to complex form are found in the ISM (interstellar medium). Perhaps the largest of these molecules are the PAHs, or polycyclic aromatic hydrocarbons, while smaller versions of PAHs have been identified in meteorites, IDPs (interplanetary dust particles) and comets within the Solar System. Life is comprised of organic molecules and, in one sense; the search for life is the search for and identification of organic molecules. This yields an interesting question. Can the organics in the ISM serve as the chemical feedstock to the prebiotic molecules identified in meteorites, comets and IDPs in a “Top-Down” synthesis mechanism? Most studies regarding the formation of prebiotic molecules focus on a “Bottoms-Up” mechanism, whereby simple organic compounds in ice form larger, more biologically relevant molecules when exposed to UV irradiation. Here we present a next generation experimental setup which focuses on if larger, interstellar organics, such as PAHs (polycyclic aromatic hydrocarbons) can serve as the chemical feedstock for the organic inventory found in the Solar System.

A. L. Mattioda↗
NASA NTRS2024

Rapid Composting of Crop Space Waste

This project processed multiple types of waste simulant feedstocks using commercial composting units and NASA Trash-to-Gas (TtG) technology processing units to see what solids, liquids, and gases could be recovered. The feedstock waste included inedible biomass, mission waste from the Johnson Space Center (JSC) Crew Health and Performance Exploration Analog (CHAPEA), Mars analog, and the long duration Orbital Syngas/Commodity Augmentation Reactor (OSCAR) Waste Simulant (OWS) and OSCAR Full Scale (FS) (also referred to as Mars 850-day mission waste simulant). The performance data was collected, and overall performance of the waste processing systems, as well as elemental analysis of the product yields for enabling Lunar and Martian regolith mixtures in a crop grow-out study, were performed. Germination took place in certain Lunar and Martian regolith studies, with promising preliminary results that TtG solid products can be used as plant nutrients to enable crop growth in off-world regolith simulants.

Anne Meier↗
DOE OSTI2020

Single-reactor conversion of ethanol to 1-/2-butenes

A simplified processes for producing desired chemicals such as butenes from feedstock mixtures containing ethanol. In one set of embodiments this is performed in a single step, wherein a feed containing ethanol in a gas phase is passed over an acidic metal oxide catalyst having a transition metal dispersion of at least 5% on a metal oxide support. The ethanol content of the feedstock mixture may vary from 10 to 100 percent of the feed and in those non-eat applications the ethanol feed may contain water.

09 BIOMASS FUELS↗
DOE OSTI2020

Production of liquids and reduced sulfur gaseous products from sour natural gas

Aspects of the invention are associated with the discovery of approaches for the conversion of sour natural gas streams, by conversion to liquid hydrocarbons. Particular processes and their associated apparatuses advantageously combine (i) dehydroaromatization (DHA) of methane in a gaseous feedstock, to produce aromatic hydrocarbons such as benzene, with (ii) the reaction of H2S and methane in this feedstock, to produce organic sulfur compounds such as carbon disulfide (CS2) and thiophene (C4H4S). A gaseous product having a reduced concentration of H2S is thereby generated. The aromatic hydrocarbons and organic sulfur compounds may be recovered in a liquid product. Both the gaseous and liquid products may be easily amenable to further upgrading. Other advantages of the disclosed processes and apparatuses reside in their simplicity, whereby the associated streams, including a potential gaseous recycle, generally avoid high partial pressures of H2S.

03 NATURAL GAS↗
DOE OSTI2021

BETO 2021 Peer Review - Catalytic Upgrading of Pyrolysis Vapors 2.3.1.314

Catalytic fast pyrolysis (CFP) is a versatile pathway for the direct liquefaction of biomass and waste carbon sources to generate a stabilized bio-oil intermediate that can be further processed into renewable fuels, chemicals, and materials. The objective of this project is advance the CFP state-of-technology through integrated catalyst and process development, expand market responsiveness by creating routes to novel co-products, and provide experimental data to inform process modelling and scale-up activities. Research advancements over the past two years include reducing analytical uncertainty by achieving 100 ± 1% carbon balances during reaction testing with woody biomass, improving process efficiency by achieving a 4x increase in catalyst cycle length, demonstrating compatibility with waste feedstocks, and confirming process durability for 100+ reaction cycles. Additionally, this project supported a comprehensive pathway review to evaluate scale-up needs. This review resulted in the early identification of technical risks and informed proactive planning for the BETO 2022 Verification. Other impacts from this project include generation of broadly enabling scientific knowledge (14 publications/18 presentations since 2019), engagement with industry partners (e.g., Johnson Matthey and ExxonMobil), and identification of a promising pathway to market that addresses emerging demands for biogenic refinery feedstocks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Development of Bismuth and Platinum Bi-Metallic Nanoparticles to Enhance Melt Wire Temperature Resolution

Advanced manufacturing (AM) based on direct-write (DW) technologies has emerged as the predominant enabler for the fabrication of active and passive sensors to be deployed in harsh operating environments seen in a nuclear reactor. Recently, Idaho National Laboratory and Boise State University have recently established capabilities to incorporate advanced manufacturing (AM) methods to accelerate, modernize and enhance functionality of nuclear sensors and instrumentation to achieve the goal of enhancing the safety and efficiency of nuclear reactors. A significant thrust of this work includes the development of nuclear relevant feedstock materials compatible with a variety of direct-write processes for the development, fabrication and testing of AM sensors for peak temperature detection and neutron flux monitoring. For this report, bismuth and bismuth/platinum (BiPt) bi-metallic nanoparticles were synthesized using wet chemical approaches to develop bi-metallic feedstock materials to enhance the sensitivity of melt wires for peak temperature detection. Nanoparticle characterization was performed with Transmission Electron Microscopy (TEM) for nanoparticle composition and size, Transmission X-Ray Diffraction Fluorescence (TXRF) for nanoparticle composition, and Differential Scanning Calorimetry to elucidate the melting point of BiPt bi-metallic nanoparticles. Preliminary results indicate bi-metallic BiPt nanoparticles as a viable pathway for fabricating high resolution AM melt wires.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Process Intensification and Scale-Up of a Continuous Enzymatic Hydrolysis and Separation Process

Combining separate unit operations into one where the best of each part can be maximized is one of the benefits of process intensification. An example is the combination of lignocellulosic biomass enzymatic hydrolysis with the downstream solid-liquid separation step to produce clarified sugars ready for fermentation or catalytic upgrading. The productivity and endpoint yield of enzymatic hydrolysis both enjoy the benefits of reduced feedback inhibition through the continuous removal of sugars by incorporating separations into the reactor. Likewise, the efficiency of recovering clarified sugars from the enzymatic hydrolysis slurry can be enhanced by operating separations equipment at steady-state conditions simultaneously with the continuously fed hydrolysis process. A key parameter that enables greater processing capacity while also raising the risks of failure is the solids loading or concentration. Higher solids loading allows for smaller reactor vessels and results in clarified sugars of higher concentration; however, required pumping power increases, reactor agitation may become ineffective, and membrane flux suffers. Feedstock material attributes influenced by upstream pretreatment must also be scrutinized more carefully: dilute-acid pretreated and deacetylated-and-disc-refined feedstocks exhibit different characteristics that affect agitation and pumping. The authors invite you to further explore the process science enabling the scale-up of this technology from conceptual work at the bench to pilot-scale industrially-relevant equipment where the challenges and solutions of integration and process optimization are expounded upon.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Characterizing The Internal Morphology of Transition Regions in Large-Scale Extrusion Deposition Additive Manufacturing

A dual-hopper feed system that was developed for the Big Area Additive Manufacturing (BAAM) system allows for transitioning between different materials while maintaining continuous deposition. This technique creates a step-change in material feedstock by switching the pellet feeding system to alternate which hopper is currently supplying material, allowing for multi-material construction. The step-change in feedstock material produces a transition region that is characterized by a compositional gradient and blended internal morphology. Initial cross-sectional imaging of the transition region revealed a non-homogenous blend of materials with distinct domains of each material, likely due to incomplete mixing within the screw. This study used a carbon fiber reinforced acrylonitrile butadiene styrene (CF-ABS) and an unfilled ABS to characterize the internal structure and to correlate it to mechanical performance by tracking microhardness across cross-sections of the transition region.

Brackett, James↗
DOE OSTI2021

Hierarchical porous metals with deterministic 3D morphology and shape via de-alloying of 3D printed alloys

The present disclosure relates to a method for forming a three dimensional, hierarchical, porous metal structure with deterministically controlled 3D multiscale pore architectures. The method may involve providing a feedstock able to be applied in an additive manufacturing process, and using an additive manufacturing process to produce a three dimensional (3D) structure using the feedstock. The method may involve further processing the 3D structure through at least a de-alloying operation to form a metallic 3D structure having an engineered, digitally controlled macropore morphology with integrated nanoporosity.

Qi, Zhen↗
DOE OSTI2022

Simulation and Optimization of Volatile Fatty Acid Upgrading Strategies for Sustainable Transportation Fuel Production

Underutilized wet waste is a promising feedstock for production of carbon-neutral or carbon-negative liquid transportation fuels. Arrested methanogenesis of wet wastes by microbes, which produces mixtures of C2-C8 carboxylic acids (volatile fatty acids, VFAs), is practiced industrially at a pilot scale and the VFA products can be catalytically upgraded to molecules suitable for use as transportation fuels (alcohols and alkanes) via sequential ketonization and hydrogenation, both steps of which have been demonstrated with high (>90%) yield at the lab scale. We present in this work a simulation-based decision-making framework which evaluates upgrading strategies of VFAs to alcohol- and hydrocarbon-based neat and blended diesel, jet, and gasoline fuels. The processes utilize sequential upgrading steps (ketonization and hydrogenation) accompanied by one distillation step (either separating VFAs before ketonization or alcohols after ketone hydrogenation) to form two liquid streams: a light alcohol stream best suited as a light-duty fuel and a heavy alcohol or hydrocarbon stream best suited as a diesel or jet fuel. Suitability of the liquid products as transportation fuels and maximum blending levels with petrofuels comes from simulation of critical fuel properties (boiling point, flash point, lower heating value, viscosity, melting point, water solubility, and cetane/octane number). Catalytic upgrading steps and fuel property mixing models used by the simulation are experimentally validated. We demonstrate the flexibility of the decision-making algorithm by evaluating processing scenarios for experimentally-observed VFA profiles with varied carbon chain length distributions. Processing scenarios are optimized for either maximum total renewable carbon utilization or production of heavy-duty (jet or diesel) fuels. We evaluate the economic viability and CO2 emissions of each proposed upgrading scenario using techno-economic and life cycle analyses. The decision-making framework developed in this work can also be used to down-select promising strategies for upgrading of other bio-based feedstocks to sustainable fuels and chemicals.

aviation fuel↗
DOE OSTI2022

Process for delivering liquid H 2 from an active magnetic regenerative refrigerator H 2 liquefier to a liquid H 2 vehicle dispenser

A process that includes pre-cooling a H 2 gas feedstock with a compressed liquid natural gas via a heat exchanger, introducing the pre-cooled H 2 gas feedstock into an active magnetic regenerative refrigerator H 2 liquefier module, and delivering liquid H 2 from the active magnetic regenerative refrigerator H 2 liquefier module to a liquid H 2 vehicle dispenser.

Holladay, Jamie D.↗
DOE OSTI2022

Engineered microbes for conversion of organic compounds to medium chain length alcohols and methods of use

This disclosure provides a genetically-modified bacterium from the genus Pseudomonas that comprises an exogenous nucleic acid encoding an enoyl-CoA reductase and an exogenous nucleic acid encoding an acyl-CoA reductase that produces medium chain length alcohols. The disclosure further provides methods for producing medium chain alcohols using such genetically-modified bacterium. This disclosure provides a renewable, bio-based production platform for valuable mcl-alcohols that have a wide range of industrial applications. Current production of mcl-alcohols typically occurs through the hydrogenation of plant oils and waxes. This process leads to issues of deforestation and is largely unsustainable. Utilizing waste lignin streams as the carbon source provides a more sustainable feedstock that can be generated from plant waste like corn stover. Along with this, the use of lignin avoids competition with food resources as traditional starch and sugar feedstocks.

Guss, Adam M.↗
DOE OSTI2022

Systems and methods for additive manufacturing to encapsulate transformative colloidal suspensions

The present disclosure relates to an energy absorbing three dimensional (3D) structure. The structure may have an outer shell formed from a shell material. The outer shell may have a void forming a core volume. A transformative feedstock is contained in the void. The transformative feedstock is encapsulated within the outer shell, within the void, and provides enhanced energy absorbing properties to the 3D structure.

Mancini, Julie A.↗
DOE OSTI2022

Methods and systems for microwave assisted production of graphitic materials

Systems and methods for plasma based synthesis of graphitic materials. The system includes a plasma forming zone configured to generate a plasma from radio-frequency radiation, an interface element configured to transmit the plasma from the plasma forming zone to a reaction zone, and the reaction zone configured to receive the plasma. The reaction zone is further configured to receive feedstock material comprising a carbon containing species, and convert the feedstock material to a product comprising the graphitic materials in presence of the plasma.

Zeller, Kurt W.↗