Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Analyzing the Radiation Properties of High-Z Impurities in High-Temperature Plasmas

Most tokamak-based reactor concepts require the use of noble gases to form either a radiative mantle or divertor to reduce conductive heat exhaust to tolerable levels for plasma facing components. Predicting the power loss necessary from impurity radiation is done using electron temperature-dependent 'cooling-curves' derived from ab initio atomic physics models. We present here a technique to verify such modeling using highly radiative, argon infused discharges on Alcator C-Mod. A novel x-ray crystal imaging spectrometer is used to measure spatially resolved profiles of line-emissivity, constraining impurity transport simulations. Experimental data from soft x-ray diodes, bare AXUV diodes and foil bolometers are used to determine the local emissivity in three overlapping spectral bands, which are quantitatively compared to models. Comparison of broadband measurements show agreement between experiment and modeling in the core, but not over the entire profile, with the differences likely due to errors in the assumed radial impurity transport outside of the core. Comparison of Ar{sup 16+} x-ray line emission modeling to measurements suggests an additional problem with the collisional-radiative modeling of that charge state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Describing long-range charge-separation processes with subsystem density-functional theory

Long-range charge-transfer processes in extended systems are difficult to describe with quantum chemical methods. In particular, cost-effective (non-hybrid) approximations within time-dependent density functional theory (DFT) are not applicable unless special precautions are taken. Here, we show that the efficient subsystem DFT can be employed as a constrained DFT variant to describe the energetics of long-range charge-separation processes. A formal analysis of the energy components in subsystem DFT for such excitation energies is presented, which demonstrates that both the distance dependence and the long-range limit are correctly described. In addition, electronic couplings for these processes as needed for rate constants in Marcus theory can be obtained from this method. It is shown that the electronic structure of charge-separated states constructed by a positively charged subsystem interacting with a negatively charged one is difficult to converge — charge leaking from the negative subsystem to the positive one can occur. This problem is related to the delocalization error in DFT and can be overcome with asymptotically correct exchange–correlation (XC) potentials or XC potentials including a sufficiently large amount of exact exchange. We also outline an approximate way to obtain charge-transfer couplings between locally excited and charge-separated states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory of water with the machine-learned DM21 functional

The delicate interplay between functional-driven and density-driven errors in density functional theory (DFT) has hindered traditional density functional approximations (DFAs) from providing an accurate description of water for over 30 years. Recently, the deep-learned DeepMind 21 (DM21) functional has been shown to overcome the limitations of traditional DFAs as it is free of delocalization error. To determine if DM21 can enable a molecular-level description of the physical properties of aqueous systems within Kohn–Sham DFT, we assess the accuracy of the DM21 functional for neutral, protonated, and deprotonated water clusters. Furthermore, we find that the ability of DM21 to accurately predict the energetics of aqueous clusters varies significantly with cluster size. Additionally, we introduce the many-body MB-DM21 potential derived from DM21 data within the many-body expansion of the energy and use it in simulations of liquid water as a function of temperature at ambient pressure. We find that size-dependent functional-driven errors identified in the analysis of the energetics of small clusters calculated with the DM21 functional result in the MB-DM21 potential systematically overestimating the hydrogen-bond strength and, consequently, predicting a more ice-like local structure of water at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE SLACS SURVEY. VIII. THE RELATION BETWEEN ENVIRONMENT AND INTERNAL STRUCTURE OF EARLY-TYPE GALAXIES

We study the relation between the internal structure of early-type galaxies and their environment using 70 strong gravitational lenses from the SLACS Survey. The Sloan Digital Sky Survey (SDSS) database is used to determine two measures of overdensity of galaxies around each lens-the projected number density of galaxies inside the tenth nearest neighbor ({sigma}{sub 10}) and within a cone of radius one h{sup -1} Mpc (D {sub 1}). Our main results are as follows. (1) The average overdensity is somewhat larger than unity, consistent with lenses preferring overdense environments as expected for massive early-type galaxies (12/70 lenses are in known groups/clusters). (2) The distribution of overdensities is indistinguishable from that of 'twin' nonlens galaxies selected from SDSS to have the same redshift and stellar velocity dispersion {sigma}{sub *}. Thus, within our errors, lens galaxies are an unbiased population, and the SLACS results can be generalized to the overall population of early-type galaxies. (3) Typical contributions from external mass distribution are no more than a few percent in local mass density, reaching 10-20% ({approx}0.05-0.10 external convergence) only in the most extreme overdensities. (4) No significant correlation between overdensity and slope of the mass-density profile of the lens galaxies is found. (5) Satellite galaxies (those with a more luminous companion) have marginally steeper mass-density profiles (as quantified by f {sub SIE} = {sigma}{sub *}/{sigma}{sub SIE} = 1.12 {+-} 0.05 versus 1.01 {+-} 0.01) and smaller dynamically normalized mass enclosed within the Einstein radius ({delta}log M {sub Ein}/M {sub dim} differs by -0.09 {+-} 0.03 dex) than central galaxies (those without). This result suggests that tidal stripping may affect the mass structure of early-type galaxies down to kpc scales probed by strong lensing, when they fall into larger structures.

99 GENERAL AND MISCELLANEOUS↗

Comparative first-principles studies of prototypical ferroelectric materials by LDA, GGA, and SCAN meta-GGA

Originating from a broken spatial inversion symmetry, ferroelectricity is a functionality of materials with an electric dipole that can be switched by external electric fields. Spontaneous polarization is a crucial ferroelectric property, and its amplitude is determined by the strength of polar structural distortions. Density functional theory (DFT) is one of the most widely used theoretical methods to study ferroelectric properties, yet it is limited by the levels of approximations in electron exchange-correlation. On the one hand, the local density approximation (LDA) is considered to be more accurate for the conventional perovskite ferroelectrics such as BaTiO 3 and PbTiO 3 than the generalized gradient approximation (GGA),which suffers from the so-called super-tetragonality error. On the other hand, GGA is more suitable for hydrogen-bonded ferroelectrics than LDA, which largely overestimates the strength of hydrogen bonding in general. We demonstrate here that the recently developed general-purpose strongly constrained and appropriately normed (SCAN) meta-GGA functional significantly improves over the traditional LDA/GGA for structural, electric, and energetic properties of diversely bonded ferroelectric materials with a comparable computational effort and thus enhances largely the predictive power of DFT in studies of ferroelectric materials. We also address the observed system-dependent performances of LDA and GGA for ferroelectrics from a chemical bonding point of view.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

H 0 = 69.8 ± 1.3 km s - 1 Mpc - 1 , Ω m 0 = 0.288 ± 0.017 , and other constraints from lower-redshift, non-CMB, expansion-rate data

Here, we use updated Type Ia Pantheon+ supernova, baryon acoustic oscillation, and Hubble parameter (now also accounting for correlations) data, as well as new reverberation-measured C $\tiny{IV}$ quasar data, and quasar angular size, H $\tiny{II}$ starburst galaxy, reverberation-measured Mg $\tiny{II}$ quasar, and Amati correlated gamma-ray burst data to constrain cosmological parameters. We show that these data sets result in mutually consistent constraints and jointly use them to constrain cosmological parameters in six different spatially-flat and non-flat cosmological models. Our analysis provides summary model independent determinations of two key cosmological parameters: the Hubble constant, H 0 = 69.8 ± 1.3 km s -1 Mpc -1 , and the current non-relativistic matter density parameter, Ω m0 = 0.288 ± 0.017. Our summary error bars are 2.4 and 2.3 times those obtained using the flat ΛCDM model and Planck TT,TE,EE + lowE + lensing cosmic microwave background (CMB) anisotropy data. Our H 0 value is very consistent with that from the local expansion rate based on the Tip of the Red Giant Branch and Type Ia supernova (SN Ia) data, is 2σ lower than that from the local expansion rate based on Cepheid and SN Ia data, and is 2σ higher than that in the flat ΛCDM model based on Planck TT,TE,EE + lowE + lensing CMB data. Our data compilation shows at most mild evidence for non-flat spatial hypersurfaces, but more significant evidence for dark energy dynamics, 2σ or larger in the spatially-flat dynamical dark energy models we study.

79 ASTRONOMY AND ASTROPHYSICS↗

Classical Simulation of Boson Sampling Based on Graph Structure

Boson sampling is a fundamentally and practically important task that can be used to demonstrate quantum supremacy using noisy intermediate-scale quantum devices. In this Letter, we present classical sampling algorithms for single-photon and Gaussian input states that take advantage of a graph structure of a linear-optical circuit. The algorithms’ complexity grows as so-called treewidth, which is closely related to the connectivity of a given linear-optical circuit. Using the algorithms, we study approximated simulations for local Haar-random linear-optical circuits. For equally spaced initial sources, we show that, when the circuit depth is less than the quadratic in the lattice spacing, the efficient simulation is possible with an exponentially small error. Notably, right after this depth, photons start to interfere each other and the algorithms’ complexity becomes subexponential in the number of sources, implying that there is a sharp transition of its complexity. Finally, when a circuit is sufficiently deep enough for photons to typically propagate to all modes, the complexity becomes exponential as generic sampling algorithms. We numerically implement a likelihood test with a recent Gaussian boson sampling experiment and show that the treewidth-based algorithm with a limited treewidth renders a larger likelihood than the experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A method to improve accuracy and precision of water surface identification for photon depth dose measurements

The objective of this study is to present a method to reduce the setup error inherent in clinical depth dose measurements and, in doing so, to improve entrance dosimetry measurement reliability. Ionization chamber (IC) depth dose measurements are acquired with the depth scan extended into the air above the water surface. An inflection region is obtained in each resulting percent depth ionization (PDI) curve that can be matched against other measurements or to an inflection region obtained from an analogous Monte Carlo (MC) simulation. Measurements are made with various field sizes for the 6 and 18 MV photon beams, with and without a Pb foil in the beam, to determine the sensitivity of the dose inflection region to the beam conditions. The offset between reference and test data set inflection regions is quantified using two separate methods. When comparing sets of measured data, maxima in the second derivative of ionization are compared. When comparing measured data to MC simulation, the offset that minimizes the sum of squared differences between the reference and test curves in the ionization inflection region is found. These methods can be used to quantify the offset between an initial setup (test) position and the true surface (reference) position. The ionization inflection location is found to be insensitive to changes in field size, electron contamination, and beam energy. Data from a single reference condition should be sufficient to identify the surface location. The method of determining IC offsets is general and should be applicable to any IC and other radiation sources. The measurement method could reduce the time and effort required in the initial IC setup at a water surface as setup errors can be corrected offline. Given a reliable set of reference data to compare with, this method could increase the ability of quality assurance (QA) measurements to detect discrepancies in beam output as opposed to discrepancies in IC localization. Application of the measurement method standardizes the procedure for localizing cylindrical ICs at a water surface and thereby improves the reliability of measurements taken with these devices at all depths.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic Structure Determination Using Polarised Resonant X-ray Scattering

Full polarisation analysis of resonantX-ray magnetic scattering (RXMS) is shown to advance the determination of magnetic moment directions of complex magnetic structures within single crystals. Key features of this novel method are the variation of the incident beam polarisation through the use of an X-ray phase plate, and the measurement of the scattered beam polarisation in terms of Poincare-Stokes parameters. Contrary to the established method, no azimuthal rotation is required. Thus, the major sources of systematic error are eliminated, and the method is compatible with exotic and complex sample environments. The technique is demonstrated with the example of TbMn2O5. The RXMS theory briefly outlined in this paper was fitted to the data, and the local and delocalized, band-specific moment directions associated with the magnetic order of the resonating species was refined with a high degree of accuracy.

36 MATERIALS SCIENCE↗

DSD2D-FLS 2010: Bdzil's 2010 DSD Code Base; Computing tb and Dn with Edits to Reduce the Noise in the Dn Field Near HE Boundaries

The full level-set function code, DSD3D, is fully described in LA-14336 (2007) [1]. This ASCI-supported, DSD code project was the last such LANL DSD code project that I was involved with before my retirement in 2007. My part in the project was to design and build the core DSD3D solver, which was to include a robust DSD boundary condition treatment. A robust boundary condition treatment was required, since for an important local “customer,” the only description of the explosives’ boundary was through volume fraction data. Given this requirement, the accuracy issues I had encountered with our “fast-tube,” narrowband, DSD2D solver, and the difficulty we had building an efficient MPI-parallel version of the narrowband DSD2D, I decided DSD3D should be built as a full level-set function code, using a totally local DSD boundary condition algorithm for the level-­set function, phi, which did not rely on the gradient of the level-­set function being one, |grad(phi)| = 1. The narrowband DSD2D solver was built on the assumption that |grad(phi)| could be driven to one, and near the boundaries of the explosive this condition was not being satisfied. Since the narrowband is typically no more than10*dx wide, narrowband methods are discrete methods with a fixed, non-­resolvable error, where the error is related to the thickness of the band: the narrower the band the larger the errors. Such a solution represents a discrete approximation to the true solution and does not limit to the solution of the underlying PDEs under grid resolution.The full level-­set function code, DSD3D, is fully described in LA-14336 (2007) [1]. This ASCI-­supported, DSD code project was the last such LANL DSD code project that I was involved with before my retirement in 2007. My part in the project was to design and build the core DSD3D solver, which was to include a robust DSD boundary condition treatment. A robust boundary condition treatment was required, since for an important local “customer,” the only description of the explosives’ boundary was through volume fraction data. Given this requirement, the accuracy issues I had encountered with our “fast-­tube,” narrowband, DSD2D solver, and the difficulty we had building an efficient MPI-parallel version of the narrowband DSD2D, I decided DSD3D should be built as a full level-­set function code, using a totally local DSD boundary condition algorithm for the level-­set function, phi, which did not rely on the gradient of the level-­set function being one, |grad(phi)| = 1. The narrowband DSD2D solver was built on the assumption that |grad(phi)| could be driven to one, and near the boundaries of the explosive this condition was not being satisfied. Since the narrowband is typically no more than10*dx wide, narrowband methods are discrete methods with a fixed, non-resolvable error, where the error is related to the thickness of the band: the narrower the band the larger the errors. Such a solution represents a discrete approximation to the true solution and does not limit to the solution of the underlying PDEs under grid resolution.

97 MATHEMATICS AND COMPUTING↗

Zwicky Transient Facility and Globular Clusters: the Period–Luminosity and Period–Luminosity–Color Relations for Late-type Contact Binaries

In this work, we aimed to derive the gri-band period–luminosity (PL) and period–luminosity–color (PLC) relations for late-type contact binaries, for the first time, located in globular clusters, using the homogeneous light curves collected by the Zwicky Transient Factory (ZTF). We started with 79 contact binaries in 15 globular clusters, and retained 30 contact binaries in 10 globular clusters that have adequate numbers of data points in the ZTF light curves and are unaffected by blending. Magnitudes at mean and maximum light of these contact binaries were determined using a fourth-order Fourier expansion, while extinction corrections were done using the Bayerstar2019 3D reddening map together with adopting the homogeneous distances to their host globular clusters. After removing early-type and “anomaly” contact binaries, our derived gri-band PL and period–Wesenheit (PW) relations exhibited a much larger dispersion with large errors on the fitted coefficients. Nevertheless, the gr-band PL and PW relations based on this small sample of contact binaries in globular clusters were consistent with those based on a larger sample of nearby contact binaries. Good agreements of the PL and PW relations suggested both samples of contact binaries in the local Solar neighborhood and in the distant globular clusters can be combined and used to derive and calibrate the PL, PW, and PLC relations. The final derived gr-band PL, PW, and PLC relations were much improved over those based on the limited sample of contact binaries in the globular clusters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radar Retrieval Evaluation and Investigation of Dendritic Growth Layer Polarimetric Signatures in a Winter Storm

Abstract This study evaluates ice particle size distribution and aspect ratio φ Multi-Radar Multi-Sensor (MRMS) dual-polarization radar retrievals through a direct comparison with two legs of observational aircraft data obtained during a winter storm case from the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) campaign. In situ cloud probes, satellite, and MRMS observations illustrate that the often-observed K dp and Z DR enhancement regions in the dendritic growth layer can either indicate a local number concentration increase of dry ice particles or the presence of ice particles mixed with a significant number of supercooled liquid droplets. Relative to in situ measurements, MRMS retrievals on average underestimated mean volume diameters by 50% and overestimated number concentrations by over 100%. IWC retrievals using Z DR and K dp within the dendritic growth layer were minimally biased relative to in situ calculations where retrievals yielded −2% median relative error for the entire aircraft leg. Incorporating φ retrievals decreased both the magnitude and spread of polarimetric retrievals below the dendritic growth layer. While φ radar retrievals suggest that observed dendritic growth layer particles were nonspherical (0.1 ≤ φ ≤ 0.2), in situ projected aspect ratios, idealized numerical simulations, and habit classifications from cloud probe images suggest that the population mean φ was generally much higher. Coordinated aircraft radar reflectivity with in situ observations suggests that the MRMS systematically underestimated reflectivity and could not resolve local peaks in mean volume diameter sizes. These results highlight the need to consider particle assumptions and radar limitations when performing retrievals. significance statement Developing snow is often detectable using weather radars. Meteorologists combine these radar measurements with mathematical equations to study how snow forms in order to determine how much snow will fall. This study evaluates current methods for estimating the total number and mass, sizes, and shapes of snowflakes from radar using images of individual snowflakes taken during two aircraft legs. Radar estimates of snowflake properties were most consistent with aircraft data inside regions with prominent radar signatures. However, radar estimates of snowflake shapes were not consistent with observed shapes estimated from the snowflake images. Although additional research is needed, these results bolster understanding of snow-growth physics and uncertainties between radar measurements and snow production that can improve future snowfall forecasting.

Meteorology & Atmospheric Sciences↗

Scalable Matrix-Free Adaptive Product-Convolution Approximation for Locally Translation-Invariant Operators

We present an adaptive grid matrix-free operator approximation scheme based on a "product-convolution" interpolation of convolution operators. This scheme is appropriate for operators that are locally translation-invariant, even if these operators are high rank or full rank. Such operators arise in Schur complement methods for solving partial differential equations (PDEs), as Hessians in PDE-constrained optimization and inverse problems, as integral operators, as covariance operators, and as Dirichlet-to-Neumann maps. Constructing the approximation requires computing the impulse responses of the operator to point sources centered on nodes in an adaptively refined grid of sample points. A randomized a posteriori error estimator drives the adaptivity. Once constructed, the approximation can be efficiently applied to vectors using the fast Fourier transform. The approximation can be efficiently converted to hierarchical matrix (H-matrix) format, then inverted or factorized using scalable H-matrix arithmetic. The quality of the approximation degrades gracefully as fewer sample points are used, allowing cheap lower quality approximations to be used as preconditioners. Furthermore, this yields an automated method to construct preconditioners for locally translation-invariant Schur complements. We directly address issues related to boundaries and prove that our scheme eliminates boundary artifacts. We test the scheme on a spatially varying blurring kernel, on the nonlocal component of an interface Schur complement for the Poisson operator, and on the data misfit Hessian for an advection dominated advection-diffusion inverse problem. Numerical results show that the scheme outperforms existing methods.

97 MATHEMATICS AND COMPUTING↗

THE UNUSUAL VARIABLE HOT B SUBDWARF LS IV-14{sup 0}116

We first present the results of follow-up photometric observations of the He-rich hot B subdwarf LS IV-14{sup 0}116, which confirm the presence of multiperiodic luminosity variations in the light curve of this star. Rather surprisingly, no other follow-up observations of this kind seem to have been published after the initial suggestion in 2005 that LS IV-14{sup 0}116 could be a pulsating star of a new kind. We were able to extract from our data at least six significant periodicities ranging from 1954 s to 5084 s, including the two oscillations uncovered previously. We also present the results of an analysis combining a high signal-to-noise optical spectrum of LS IV-14{sup 0}116 with recently developed non-local thermodynamic equilibrium model atmospheres and synthetic spectra. Our best estimates of the atmospheric parameters of this star are T{sub eff} = 34950 {+-} 250 K, log g = 5.93 {+-} 0.04, and log N(He)/N(H) = -0.62 {+-} 0.03 (formal fitting errors only). These place LS IV-14{sup 0}116 very near the region of maximum instability in the T{sub eff}-log g plane for short-period p-mode pulsators of the hot subdwarf type. If the luminosity variations are indeed due to pulsations, then LS IV-14{sup 0}116 poses a real challenge to current theory: how can such long observed periods (which would have to be associated with medium- to high-order g-modes) be excited at such a high effective temperature and surface gravity, while the short-period p-modes, more typically excited in this domain, are not observed in this particular star?

79 ASTRONOMY AND ASTROPHYSICS↗

Measuring our peculiar velocity on the CMB with high-multipole off-diagonal correlations

Our peculiar velocity with respect to the CMB rest frame is known to induce a large dipole in the CMB. However, the motion of an observer has also the effect of distorting the anisotropies at all scales, as shown by Challinor and Van Leeuwen (2002), due to aberration and Doppler effects. We propose to measure independently our local motion by using off-diagonal two-point correlation functions for high multipoles. We study the observability of the signal for temperature and polarization anisotropies. We point out that Planck can measure the velocity β with an error of about 30% and the direction with an error of about 20°. This method constitutes a cross-check, which can be useful to verify that our CMB dipole is due mainly to our velocity or to disentangle the velocity from other possible intrinsic sources. Although in this paper we focus on our peculiar velocity, a similar effect would result also from other intrinsic vectorial distortion of the CMB which would induce a dipolar lensing. Measuring the off-diagonal correlation terms is therefore a test for a preferred direction on the CMB sky.

79 ASTRONOMY AND ASTROPHYSICS↗

Maximum a posteriori CMB lensing reconstruction

Gravitational lensing of the CMB is a valuable cosmological signal that correlates to tracers of large-scale structure and acts as a important source of confusion for primordial B-mode polarization. State-of-the-art lensing reconstruction analyses use quadratic estimators, which are easily applicable to data. Yet, these estimators are known to be suboptimal, in particular for polarization, and large improvements are expected to be possible for high signal-to-noise polarization experiments. We develop a method and numerical code, LensIt, that is able to find efficiently the most probable lensing map, introducing no significant approximations to the lensed CMB likelihood, and applicable to beamed and masked data with inhomogeneous noise. It works by iteratively reconstructing the primordial unlensed CMB using a deflection estimate and its inverse, and removing residual lensing from these maps with quadratic estimator techniques. Roughly linear computational cost is maintained due to fast convergence of iterative searches, combined with the local nature of lensing. The technique achieves the maximal improvement in signal to noise expected from analytical considerations on the unmasked parts of the sky. Delensing with this optimal map leads to forecast tensor-to-scalar ratio parameter errors improved by a factor ≃2 compared to the quadratic estimator in a CMB stage IV configuration.

79 ASTRONOMY AND ASTROPHYSICS↗

Crosstalk Suppression in Individually Addressed Two-Qubit Gates in a Trapped-Ion Quantum Computer

Crosstalk between target and neighboring spectator qubits due to spillover of control signals represents a major error source limiting the fidelity of two-qubit entangling gates in quantum computers. We show that in our laser-driven trapped-ion system coherent crosstalk error can be modeled as residual $X\hat{σ}_{\phi}$ interaction and can be actively canceled by single-qubit echoing pulses. We propose and demonstrate a crosstalk suppression scheme that eliminates all first-order crosstalk utilizing only local control of target qubits, as opposed to an existing scheme which requires control over all neighboring qubits. We report a two-qubit Bell state fidelity of 99.52(6)% with the echoing pulses applied after collective gates and 99.37(5)% with the echoing pulses applied to each gate in a five-ion chain. Finally, this scheme is widely applicable to other platforms with analogous interaction Hamiltonians.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sirepo : an open-source cloud-based software interface for X-ray source and optics simulations

Sirepo , a browser-based GUI for X-ray source and optics simulations, is presented. Such calculations can be performed using SRW ( Synchrotron Radiation Workshop ), which is a physical optics computer code, allowing simulation of entire experimental beamlines using the concept of a `virtual beamline' with accurate treatment of synchrotron radiation generation and propagation through the X-ray optical system. SRW is interfaced with Sirepo by means of a Python application programming interface. Sirepo supports most of the optical elements currently used at beamlines, including recent developments in SRW . In particular, support is provided for the simulation of state-of-the-art X-ray beamlines, exploiting the high coherence and brightness of modern light source facilities. New scientific visualization and reporting capabilities have been recently implemented within Sirepo , as well as automatic determination of electron beam and undulator parameters. Publicly available community databases can be dynamically queried for error-free access to material characteristics. These computational tools can be used for the development and commissioning of new X-ray beamlines and for testing feasibility and optimization of experiments. The same interface can guide simulation on a local computer, a remote server or a high-performance cluster. Sirepo is available online and also within the NSLS-II firewall, with a growing number of users at other light source facilities. Our open source code is available on GitHub.

99 GENERAL AND MISCELLANEOUS↗