Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environment variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Goldstar 2016 Interim Report: Brief Introduction to Urban Dispersion

This section describes ways in which an urban environment can affect the distribution of airborne radiological material. In an urban area, winds at street level are significantly more variable and complex than the prevailing winds above the buildings. Elevated winds may be uniform and representative of the general flow over the surrounding area, but buildings influence the local flow such that the winds below the building heights vary significantly in location and time (Hanna et al 2006). For a release of material near an individual building, the complex effect of the building on the airflow may locally enhance the air concentration of released material in some regions near the building and reduce it in others compared to a release in open terrain. However, the overall effect of an individual building is to induce a rapid enlargement and dilution of an incident plume from an isolated source upwind of the building (Hosker 1984). A plume spreading through an urban environment of multiple buildings will experience enhanced mixing and greater spreading of the contaminant plume in both the vertical and horizontal directions, compared to the same release in open terrain.

54 ENVIRONMENTAL SCIENCES↗

Variable Emittance Coatings

Variable emittance coatings (VECs) can reduce thermal control system mass and power by passively changing radiator heat rejection according to spacecraft and environment heat loads. VECs make establishing a lunar presence easier since this technology helps overcome challenges with harsh thermal environments on the lunar surface and in transit. This CIF focuses on creating testing capabilities to assess VECs from collaborators in academia and industry. Two main testing capabilities were created. First, a set of temperature dependent Fourier Transform Infrared Spectroscopy (FTIR) measurement accessories were designed, fabricated, and used to measure samples received from collaborators. These accessories are capable of measuring the transmittance and reflectance of semi transparent and opaque samples. Second, a vacuum calorimetry experiment was designed and built to assess the variable heat rejection of larger coupons.

Sydney Taylor↗

The tropopause cold trap in the Australian Monsoon during STEP/AMEX 1987

The relationship between deep convection and tropopause cold trap conditions is examined for the tropical northern Australia region during the 1986-87 summer monsoon season, emphasizing the Australia Monsoon Experiment (AMEX) period when the NASA Stratosphere-Troposphere Exchange Project (STEP) was being conducted. The factors related to the spatial and temporal variability of the cold point potential temperature (CPPT) are investigated. A framework is developed for describing the relationships among surface average equivalent potential temperature in the surface layer (AEPTSL) the height of deep convection, and stratosphere-troposphere exchange. The time-mean pattern of convection, large-scale circulation, and surface AEPTSL in the Australian monsoon and the evolution of the convective environment during the monsoon period and the extended transition season which preceded it are described. The time-mean fields of cold point level variables are examined and the statistical relationships between mean CPPT, surface AEPTSL, and deep convection are described. Day-to-day variations of CPPT are examined in terms of these time mean relationships.

Selkirk, Henry B.↗

Differences in Tropical High Clouds Among Reanalyses: Origins and Radiative Impacts

We examine differences among reanalysis highcloud products in the tropics, assess the impacts of these differences on radiation budgets at the top of the atmosphere and within the tropical upper troposphere and lower stratosphere (UTLS), and discuss their possible origins in the context of the reanalysis models. We focus on the ERA5 (fifthgeneration European Centre for Medium-range Weather Forecasts – ECMWF – reanalysis), ERA-Interim (ECMWF Interim Reanalysis), JRA-55 (Japanese 55-year Reanalysis), MERRA-2 (Modern-Era Retrospective Analysis for Research and Applications, Version 2), and CFSR/CFSv2 (Climate Forecast System Reanalysis/Climate Forecast System Version 2) reanalyses. As a general rule, JRA-55 produces the smallest tropical high-cloud fractions and cloud water contents among the reanalyses, while MERRA-2 produces the largest. Accordingly, long-wave cloud radiative effects are relatively weak in JRA-55 and relatively strong in MERRA-2. Only MERRA-2 and ERA5 among the reanalyses produce tropical-mean values of outgoing long-wave radiation (OLR) close to those observed, but ERA5 tends to underestimate cloud effects, while MERRA-2 tends to overestimate variability. ERA5 also produces distributions of longwave, short-wave, and total cloud radiative effects at the top of the atmosphere that are very consistent with those observed. The other reanalyses all exhibit substantial biases in at least one of these metrics, although compensation between the long-wave and short-wave effects helps to constrain biases in the total cloud radiative effect for most reanalyses. The vertical distribution of cloud water content emerges as a key difference between ERA-Interim and other reanalyses. Whereas ERA-Interim shows a monotonic decrease of cloud water content with increasing height, the other reanalyses all produce distinct anvil layers. The latter is in better agreement with observations and yields very different profiles of radiative heating in the UTLS. For example, whereas the altitude of the level of zero net radiative heating tends to be lower in convective regions than in the rest of the tropics in ERAInterim, the opposite is true for the other four reanalyses. Differences in cloud water content also help to explain systematic differences in radiative heating in the tropical lower stratosphere among the reanalyses. We discuss several ways in which aspects of the cloud and convection schemes impact the tropical environment. Discrepancies in the vertical profiles of temperature and specific humidity in convective regions are particularly noteworthy, as these variables are directly constrained by data assimilation, are widely used, and feed back to convective behaviour through their relationships with thermodynamic stability.

High Clouds↗

Parametric Mechanism Design Through Numerical Optimization and Physics Simulation

Design-Build-Test approaches for developing spaceflight hardware are prohibitively time and cost intensive and often lead to suboptimal mechanism designs. Approaches that couple machine learning and high-fidelity physics simulation could eliminate the need for hardware prototyping and dramatically accelerate the engineering design cycle, ultimately reducing cost. This work presents a modular NASA-developed toolchain to optimize hardware mechanisms in a virtual environment using numerical optimization and multi-body physics simulation. The toolchain enables multi-objective optimization, generates parametric CAD files that can be further post-processed by an end user, and can be expanded to optimize full systems and non-mechanical parameters such as feedback control variables. We demonstrate the toolchain through an independently verifiable design problem that optimizes wheel radius to achieve a desired linear velocity in a rigid-body physics environment when the wheel rotates at a constant angular speed, and then post-process the parametric CAD file of the optimal design generated by the tool before ultimately manufacturing it via 3D printing. We end with a discussion of how the toolchain can incorporate other analysis tools, including finite element analysis, computational fluid dynamics, and granular media simulations.

Optimization↗

An Optimization-Based Toolchain for Parametric Mechanism Design

Design-Build-Test approaches for developing spaceflight hardware are prohibitively time and cost intensive and often lead to suboptimal mechanism designs. Approaches that couple machine learning and high-fidelity physics simulation could eliminate the need for hardware prototyping and dramatically accelerate the engineering design cycle, ultimately reducing cost. This work presents a modular NASA-developed toolchain to optimize hardware mechanisms in a virtual environment using numerical optimization and multi-body physics simulation. The toolchain enables multi-objective optimization, generates parametric CAD files that can be further post-processed by an end user, and can be expanded to optimize full systems and non-mechanical parameters such as feedback control variables. We demonstrate the toolchain through an independently verifiable design problem that optimizes wheel radius to achieve a desired linear velocity in a rigid-body physics environment when the wheel rotates at a constant angular speed, and then post-process the parametric CAD file of the optimal design generated by the tool before ultimately manufacturing it via 3D printing. We end with a discussion of how the toolchain can incorporate other analysis tools, including finite element analysis, computational fluid dynamics, and granular media simulations.

Optimization↗

Using Mineralogy to Interpret Martian Geologic History

The surface mineralogy of Mars is key to interpreting the planet’s geologic history and constraining when and where Mars may have been habitable to microbial life. Orbital mineralogical data from infrared spectrometers collected over the last two decades have demonstrated that Mars is more than a basaltic planet. Thermal infrared (TIR) emission spectrometers have identified regional variations in igneous minerals, iron oxides, and chloride salts, showing evidence for magmatic evolution and aqueous alteration. Orbital visible/shortwave infrared reflectance spectra provide detailed information about the aqueous history of Mars through the identification of clay minerals, sulfates, carbonates, zeolites, and amorphous materials in ancient ~3-4-billion-year-old terrains. Mineralogical data from rovers allow us to better characterize mineral formation mechanisms by identifying mineral assemblages and placing them in geologic context using outcrop- to grain-scale images. TIR and Mössbauer data from the Mars Exploration Rovers helped identify an ancient dune-interdune playa environment with multiple episodes of groundwater at Meridiani Planum and volcanism-induced hydrothermalism at Gusev crater. The CheMin X-ray diffractometer on the Mars Science Laboratory Curiosity rover in Gale crater is the first fully quantitative mineralogical instrument sent to another planetary surface. CheMin data allow the quantification of minerals and X-ray amorphous materials with a mineral detection limit of <1 wt.% and provide crystal chemistry of major phases from refined unit-cell parameters. CheMin has revealed local mineralogical changes in ancient sedimentary rocks not seen from orbit and helped identify habitable environments. Throughout the 600+ m of vertical stratigraphy studied so far, changes in clay mineralogy, Fe-oxides/oxyhydroxides, sulfates, and carbonates demonstrate a long history of surface and groundwater at Gale crater with variable salinity, pH, Eh, and temperature. Recent CheMin data document a decrease in clay minerals and an increase in sulfate minerals in younger strata that corresponds with a change from fluvio-lacustrine to eolian depositional environments, potentially documenting a change to a drier climate across the planet.

E. B. Rampe↗

Physiological changes, sleep, and morning mood in an isolated environment

BACKGROUND: Previous isolation studies have shown increased 24-h urine volumes and body weight gains in subjects. This project examined those and other physiological variables in relationship to sleep motor activity, subjective sleep quality, mood, and complaints during confinement. METHODS: Six male and two female subjects lived for 7 d in the National Space Development Agency of Japan's isolation chamber, which simulates the interior of the Japanese Experiment Module. Each 24-h period included 6 h of sleep, 3 meals, and 20 min of exercise. Each morning, subjects completed Sleep Sensation and Complaint Index questionnaires. Catecholamine and creatinine excretion, urine volume, and body weight were measured on the 2 d before and 2 d after confinement, and sleep motor activity was measured during confinement. RESULTS: Confinement produced no significant change in body weight, urine volume, or questionnaire results. In contrast, epinephrine, norepinephrine, and sleep motor activity exhibited significant differences during confinement (p < 0.05). Higher nocturnal norepinephrine excretion correlated with higher sleep motor activity. CONCLUSION: The 24-h epinephrine values were slightly higher than normal throughout the experiment, but lower than for subjects working under time-stress. High sympathetic activity (as indicated by norepinephrine) may have interfered with sleep.

NASA Discipline Space Human Factors↗

Multiscale characterization and representation of variability in ceramic matrix composites

Low density, high strength, and high creep and oxidation resistance properties of ceramic matrix composites (CMCs) make them an ideal choice for use in extreme environments in space and military applications. This paper presents a detailed characterization study of structural and manufacturing flaws in Carbon fiber Silicon-Carbide-Nitride matrix (C/SiNC) CMCs at different length-scales. Energy-dispersive spectroscopy (EDS) is used for the chemical characterization of the material’s elemental constituents. High-resolution multiscale graphs obtained from scanning electron microscope (SEM) and confocal laser scanning microscope (LSM) are used to characterize the distribution and morphology of defects at different length scales. This is followed by the classification and quantification of the common manufacturing defects. An image processing algorithm based on the image segmentation process is developed to quantify the variability of various scale-dependent architectural parameters. Finally, a three-dimensional stochastic representative volume element (SRVE) generation algorithm is developed to provide precise representations of material textures at multiple length scales. The developed algorithm accurately accounts for material features and flaws based on a range of multiscale structural and defects characterization results.

36 MATERIALS SCIENCE↗

Global Qualitative Flow-Path Modeling for Local State Determination in Simulation and Analysis

For qualitative modeling and analysis, a general qualitative abstraction of power transmission variables (flow and effort) for elements of flow paths includes information on resistance, net flow, permissible directions of flow, and qualitative potential is discussed. Each type of component model has flow-related variables and an associated internal flow map, connected into an overall flow network of the system. For storage devices, the implicit power transfer to the environment is represented by "virtual" circuits that include an environmental junction. A heterogeneous aggregation method simplifies the path structure. A method determines global flow-path changes during dynamic simulation and analysis, and identifies corresponding local flow state changes that are effects of global configuration changes. Flow-path determination is triggered by any change in a flow-related device variable in a simulation or analysis. Components (path elements) that may be affected are identified, and flow-related attributes favoring flow in the two possible directions are collected for each of them. Next, flow-related attributes are determined for each affected path element, based on possibly conflicting indications of flow direction. Spurious qualitative ambiguities are minimized by using relative magnitudes and permissible directions of flow, and by favoring flow sources over effort sources when comparing flow tendencies. The results are output to local flow states of affected components.

Malin, Jane T.↗

Tethered elevator: A unique opportunity for space processing

The latest fluid dynamic and material science experiments in the microgravity environment have emphasized the importance of the residual gravity level and of the g-jitter on fluid physics phenomena. The tethered elevator presents the possibility of providing variable g-levels (both steady and g-jitter) around a very low steady g-level (that can be realized when the elevator is near the center of mass of the space station-tether complex). When positioning a variable periodic oscillation to the payload a clean g-jitter disturbance can be obtained that would not be otherwise obtainable by other systems. These two possibilities make the elevator a facility to help resolve a number of still open questions that are preventing wider utilization of the space environment in the microgravity area.

Monti, R.↗

Cryogen-free variable temperature scanning SQUID microscope

Scanning Superconducting QUantum Interference Device (SQUID) microscopy is a powerful tool for imaging local magnetic properties of materials and devices, but it requires a low-vibration cryogenic environment, traditionally achieved by thermal contact with a bath of liquid helium or the mixing chamber of a “wet” dilution refrigerator. We mount a SQUID microscope on the 3 K plate of a Bluefors cryocooler and characterize its vibration spectrum by measuring SQUID noise in a region of sharp flux gradient. By implementing passive vibration isolation, we reduce relative sensor-sample vibrations to 20 nm in-plane and 15 nm out-of-plane. A variable-temperature sample stage that is thermally isolated from the SQUID sensor enables measurement at sample temperatures from 2.8 K to 110 K. We demonstrate these advances by imaging inhomogeneous diamagnetic susceptibility and vortex pinning in optimally-doped YBCO above 90 K.

47 OTHER INSTRUMENTATION↗

Situational Variables in Expert Pilot Decision Making

In traditional laboratory studies of decision making, the experimenter structures the problem, defines the goal and specifies available information. In contrast, when people make decisions in non-laboratory environments characterized as complex, dynamic and consequential, they must first identify the problem and determine what information and responses are relevant. The present research was designed to investigate which situational aspects are important to experienced pilots making aviation decisions. Twenty-eight professional pilots were asked to sort descriptions of 22 aircraft incidents into piles involving similar types of major decisions. Preliminary analyses suggest four underlying variables: time pressure, risk level, available resources, and certainty of goal attainment.

Fischer, Ute↗

DIFFUSIVE COSMIC-RAY ACCELERATION IN SAGITTARIUS A*

Together, Fermi-LAT and HESS have revealed the presence of an unusual GeV-TeV source coincident with Sgr A* at the Galactic center. Its high-energy emission appears to be bimodal, hinting at an energizing process more sophisticated than mere shock acceleration. It has been suggested that this may be evidence of strong, rapid variability, as required if Sgr A*'s emission were responsible for the fluorescent X-ray echoes detected in nearby molecular clouds. In this Letter, however, we show that stochastic acceleration in a more realistic two-phase environment surrounding the central black hole can accommodate Sgr A*'s high-energy spectrum quite well. We therefore suggest that the Fermi-HESS data alone do not necessarily provide evidence for strong variability in Sgr A*.

79 ASTRONOMY AND ASTROPHYSICS↗

Ocean circulation and climate variability in the northern South China Sea during the Greek Minimum derived from coral Δ 14 C and Sr/Ca records

Ocean circulation transports heat, salt and nutrients, and has profound impacts on the marine environment and climate change. However, the seasonal to centennial variations of the paleocirculation of the South China Sea (SCS) and their driving forces are still unclear due to limited records. Here we reconstructed a high-resolution Δ 14 C record of a coral from Sanya to investigate the seasonal variations of the SCS ocean circulation around 2300 cal yr BP during a grand solar minimum (GSM) period. The seasonal Δ 14 C variability shows the influence of coastal upwelling caused by the East Asian Summer Monsoon (EASM) in summer and the effect of water intrusion from the western Pacific Ocean driven by the Kuroshio Intrusion (KI) in winter. Here we compiled the marine radiocarbon reservoir correction (ΔR) records since 2500 cal yr BP, which indicate a gradual decrease of upwelling significantly correlated with the EASM. Comparisons with other climate records suggest that both the EASM and KI may regulate the ocean circulation variability on centennial time scales. As a good index of the sea surface temperature (SST), our Sr/Ca record and spectral analysis results show a low temperature and a low frequency of El Niño-Southern Oscillation (ENSO) events around 2300 cal yr BP. Moreover, the composite coral Sr/Ca-SST and ENSO index records since 2500 cal yr BP show relatively low SST and weak ENSO during GSMs, supporting the modulation of tropical SST and ENSO by solar activity. Our study has provided high-resolution proxy data and revealed the driving forces of ocean circulation and climate change in the SCS at multiple time scales, which should be considered in further modeling work.

54 ENVIRONMENTAL SCIENCES↗

Hydraulic anatomy affects genotypic variation in plant water use and shows differential organ specific plasticity to drought in Sorghum bicolor

Genotypic variability and plasticity in hydraulic anatomy are not well-understood in herbaceous monocots. In this work, we used Sorghum bicolor , a monocotyledonous, tropical grass model, to understand whether differential plant water use is associated with xylem anatomy and if whole-plant xylem anatomy responds to water stress, justifying differential genotypic sensitivity to drought. In a greenhouse environment, we studied four sorghum genotypes that are known to genetically differ in growth and exhibit differential sensitivity to drought. Under well-watered scenario, transpiration variability and plant growth traits correlated with xylem anatomical traits at both the leaf and stem level, including xylem area and predicted xylem-specific hydraulic conductivity. High water use genotypes had inherently higher hydraulic capacity, but under drought, their transpiration declined at higher fractions of transpirable soil water ( FTSW ) and they showed greater plasticity in hydraulic anatomy. However, lower FTSW thresholds and modest anatomical changes were identified in the low water use genotypes with inherently lower hydraulic conductivity. Drought, induced modular phenotypic plasticity in hydraulic anatomy, whereby plasticity in leaf xylem traits was remarkably higher than stem xylem, while root xylem showed a reverse nature of vascular modification. Xylem traits were in agreement with phloem anatomy, irrespective of water regime. In conclusion, our study indicates that hydraulic anatomy can be critical for herbaceous monocots in determining limits to plant water use and genotypic response to drought with implications on whole-plant functions and habitat ecology.

54 ENVIRONMENTAL SCIENCES↗

Influence of ENSO and the NAO on terrestrial carbon uptake in the Texas-northern Mexico region

Climate extremes such as drought and heat waves can cause substantial reductions in terrestrial carbon uptake. Advancing projections of the carbon uptake response to future climate extremes depends on (1) identifying mechanistic links between the carbon cycle and atmospheric drivers, (2) detecting and attributing uptake changes, and (3) evaluating models of land response and atmospheric forcing. Here, we combine model simulations, remote sensing products, and ground observations to investigate the impact of climate variability on carbon uptake in the Texas-northern Mexico region. Specifically, we (1) examine the relationship between drought, carbon uptake, and variability of El Niño–Southern Oscillation (ENSO) and the North Atlantic Oscillation (NAO) using the Joint UK Land-Environment Simulator (JULES) biosphere simulations from 1950–2012, (2) quantify changes in carbon uptake during record drought conditions in 2011, and (3) evaluate JULES carbon uptake and soil moisture in 2011 using observations from remote sensing and a network of flux towers in the region. Long-term simulations reveal systematic decreases in regional-scale carbon uptake during negative phases of ENSO and NAO, including amplified reductions of gross primary production (GPP) (-0.42 ± 0.18 Pg C yr -1 ) and net ecosystem production (NEP) (-0.14 ± 0.11 Pg C yr -1 ) during strong La Niña years. The 2011 megadrought caused some of the largest declines of GPP (-0.50 Pg C yr -1 ) and NEP (-0.23 Pg C yr -1 ) in our simulations. In 2011, consistent declines were found in observations, including high correlation of GPP and surface soil moisture (r = 0.82 ± 0.23, p = 0.012) in remote sensing-based products. These results suggest a large-scale response of carbon uptake to ENSO and NAO, and highlight a need to improve model predictions of ENSO and NAO in order to improve predictions of future impacts on the carbon cycle and the associated feedbacks to climate change.

54 ENVIRONMENTAL SCIENCES↗

Unravelling the sintering temperature-induced phase transformations in Ba(Fe 0.7 Ta 0.3 )O 3-δ ceramics

This work reports on the fundamental details of the crystal structure and phase transformations in Ba(Fe 0.7 Ta 0.3 )O 3-δ , the best known temperature-independent oxygen-sensing ceramic material for applications in extreme environments. Ba(Fe 0.7 Ta 0.3 )O 3-δ ceramics were synthesized using conventional solid-state ceramic reaction under variable sintering temperatures (T s = 1200–1350 °C). Combined X-ray diffraction (XRD) and high-resolution transmission electron microscopy (TEM) measurements revealed the T s -induced phase transformations and their origin in Ba(Fe 0.7 Ta 0.3 )O 3-δ . Associated with phase transformations, pseudo-cubic (PC) reflections, such as {200} PC , {211} PC , and {220} PC , exhibited distinct anomalies with increasing T s . At T s = 1200 °C, Ba(Fe 0.7 Ta 0.3 )O 3-δ stabilized in mixed orthorhombic + rhombohedral phases (Amm2 + R3m). With increasing T s (≥1250 °C), Ba(Fe 0.7 Ta 0.3 )O 3-δ ceramics stabilized in tetragonal/rhombohedral [P4mm + R3m] mixed phases, while variations in the quantity of the respective phases were observed. Because both structure and crystal chemistry play key roles in achieving enhanced performance in chemical sensing and catalytic converters, detailed understanding of the phase transformations and crystal structure of Ba(Fe 0.7 Ta 0.3 )O 3-δ ceramics, as derived in this work, will be useful to develop chemical sensors with optimum performance for high-temperature and corrosive environments.

36 MATERIALS SCIENCE↗