Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “driving behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Foams in Hohlraums

Foam materials are starting to find application in laser-heated hohlraums used to drive inertial confinement fusion (ICF) implosions. The disparate scales of the solid foam elements (nm) compared to the typical problem scale (mm) make it expensive to resolve the individual foam elements in hydrodynamic calculations. In this project we developed two new models for treating foam materials – a 3D hydrodynamic model that treats the foam as bits of pre-expanded solid material separated by voids, and a subgrid model that captures the essential physics of laser-heated foams without requiring resolution of the individual solid elements. We also explored the microphysics of the transition from interpenetrating kinetic behavior to fully-collisional fluid-like behavior during the early time heating and expansion of foam elements through a combination of single-fluid and multi-fluid hydrodynamics calculations and particle-in-cell calculations. The model was benchmarked against these calculations and against experimental data on laser-heated chemical and additive-manufactured (AM) foams. Since there was no existing data on laser-heated AM foams, we performed the first experiments on such foams at the Jupiter Laser Facility. Samples of three different types of printed AM foams were heated using a single 0.5 micron laser. The foam densities ranged from 10 to 100 mg/cc (supercritical for 0.5 micron light). We measured the backscattered light (power and spectrum), the transmitted light, and the time-integrated temperature of the foam samples. This benchmarked subgrid foam model is a new capability that should allow routine calculation of ICF designs using foam elements, potentially opening up a new design space.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multiterminal Inverse AC Josephson Effect

When a Josephson junction is exposed to microwave radiation, it undergoes the inverse AC Josephson effect–the phase of the junction locks to the drive frequency. As a result, the I–V curves of the junction acquire “Shapiro steps” of quantized voltage. If the junction has three or more superconducting contacts, coupling between different pairs of terminals must be taken into account and the state of the junction evolves in a phase space of higher dimensionality. Here, we study the multiterminal inverse AC Josephson effect in a graphene sample with three superconducting terminals. We observe robust fractional Shapiro steps and correlated switching events, which can only be explained by considering the device as a completely connected Josephson network. We successfully simulate the observed behaviors using a modified two-dimensional RCSJ model. Our results suggest that multiterminal Josephson junctions are a playground to study highly connected nonlinear networks with novel topologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Toward using collective x-ray Thomson scattering to study C–H demixing and hydrogen metallization in warm dense matter conditions

The insulator–metal transition in liquid hydrogen is an important phenomenon to understand the interiors of gas giants, such as Jupiter and Saturn, as well as the physical and chemical behavior of materials at high pressures and temperatures. Here, the path toward an experimental approach is detailed based on spectrally resolved x-ray scattering, tailored to observe and characterize hydrogen metallization in dynamically compressed hydrocarbons in the regime of carbon–hydrogen phase separation. With the help of time-dependent density functional theory calculations and scattering spectra from undriven carbon samples collected at the European x-ray Free-Electron Laser Facility (EuXFEL), we demonstrate sufficient data quality for observing C–H demixing and investigating the presence of liquid metallic hydrogen in future experiments using the reprated drive laser systems at EuXFEL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2019

Isolated Rotor Forward Flight Testing at Martian Atmospheric Density Data Report

With the recent interest in Martian exploration using Unmanned Aerial Vehicles (UAVs), an experimental study was conducted to investigate rotor performance at Martian atmospheric conditions. Both simulation and testing of rotors is vital for evaluating rotor performance and behavior, especially for operations at Martian atmospheric densities and pressures. One critical test that has not been performed to date is helicopter forward flight testing at Martian atmospheric densities. To achieve this, a test was conducted in a tunnel facility that could be evacuated to the atmospheric pressure and density of Mars. A 40-inch-diameter rotor, roughly approximating the scale of the proposed Mars Helicopter (MH) design by the NASA Jet Propulsion Laboratory (JPL), was tested in forward flight at Mars’ atmospheric pressure at the NASA Ames Planetary Aeolian Laboratory (PAL). In this forward flight testing, the drive system of the Martian Surface Wind Tunnel (MARSWIT) was never turned on; all wind speeds read were generated either through the rotor spinning or from facility effects. The goal of this experiment was to collect rotor thrust, rotational speed, power, torque, and acoustics measurements. Subsequently, these results can be used for correlation with simulated cases using a mid-fidelity Computational Fluid Dynamics (CFD) simulation. As expected, rotor thrust and power are drastically reduced at air densities 100 times lower than at sea level on Earth. In addition, Reynolds number effects seem to play a vital role at reduced pressure that cannot be neglected in the simulation.

One Atmosphere↗
DOE OSTI2026

Atomic faulting drives exceptional toughness in low thermal expansion chromium alloys

Endowing functional properties with mechanical responses in traditional metals has been a frontier topic, akin to transforming base metal into gold. Chromium and its alloys, with their functional deficiencies and limited ductility, serve as typical examples. Herein, we report a Cr96Fe4Ge1.3B1 alloy that unifies low thermal expansion (LTE, αl = 1.79 × 10-6 K-1, 200 − 315 K) with exceptional toughness (240.2 J·cm-3). The enhancement in mechanical responses is primarily attributed to layered Cr2B intermetallic precipitates, which ameliorate interfacial cohesion and simultaneously refine the grain structure. The weakened interlayer interactions within the Cr-B layers facilitate the nucleation and movement of numerous tiny stacking faults in precipitates, efficiently alleviating strain energy and resulting in marked work-hardening ability. Additionally, antiferromagnetic fluctuations in the BCC matrix contribute to the unique LTE behavior. This paves the way for the design of high-performance alloys featuring layered-symmetry precipitates.

Yu, Chengyi [University of Science and Technology ↗
DOE OSTI2024

Effect of THz-bandwidth incoherent laser radiation on bulk damage in potassium dihydrogen phosphate crystals

Abstract The laser-damage performance characteristics of potassium dihydrogen phosphate (KDP) samples under exposure to a distinctive broadband incoherent laser pulse are investigated. A laser system providing such pulses is intended to explore improved energy-coupling efficiency on the target in direct-drive inertial confinement fusion experiments and provides incoherent bandwidths as large as 10 THz in a nanosecond pulse. A consequence of this bandwidth is very rapid fluctuations in intensity capable of reaching maxima much larger than the average intensity within the pulse. A custom damage-test station has been built to perform measurements with broadband incoherent pulses in order to determine what effect these fast and high-intensity oscillations have on laser damage. A set of experiments under different bandwidth and beam configurations shows the effect to be minimal when probing bulk damage in KDP. Modeling indicates this behavior is supported by long electron-relaxation times compared to the source-field fluctuations, following excitation of individual electrons in the conduction band. The results help better understand the laser-induced–damage mechanisms in KDP, and its ability to operate in broadband temporally incoherent high-energy lasers that may be particularly suitable for future laser-fusion energy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Coupled Gas-Exchange Model for C4 Leaves Comparing Stomatal Conductance Models

Plant simulation models are abstractions of plant physiological processes that are useful for investigating the responses of plants to changes in the environment. Because photosynthesis and transpiration are fundamental processes that drive plant growth and water relations, a leaf gas-exchange model that couples their interdependent relationship through stomatal control is a prerequisite for explanatory plant simulation models. Here, we present a coupled gas-exchange model for C4 leaves incorporating two widely used stomatal conductance submodels: Ball–Berry and Medlyn models. The output variables of the model includes steady-state values of CO2 assimilation rate, transpiration rate, stomatal conductance, leaf temperature, internal CO2 concentrations, and other leaf gas-exchange attributes in response to light, temperature, CO2, humidity, leaf nitrogen, and leaf water status. We test the model behavior and sensitivity, and discuss its applications and limitations. The model was implemented in Julia programming language using a novel modeling framework. Our testing and analyses indicate that the model behavior is reasonably sensitive and reliable in a wide range of environmental conditions. The behavior of the two model variants differing in stomatal conductance submodels deviated substantially from each other in low humidity conditions. The model was capable of replicating the behavior of transgenic C4 leaves under moderate temperatures as found in the literature. The coupled model, however, underestimated stomatal conductance in very high temperatures. This is likely an inherent limitation of the coupling approaches using Ball–Berry type models in which photosynthesis and stomatal conductance are recursively linked as an input of the other.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1993

The stratopause semiannual oscillation in the NCAR Community Climate Model

The middle atmospheric version of the NCAR Community Climate Model (CCM2) has been used to study the development of the equatorial semiannual oscillation (SAO) in the stratosphere. The model domain extends from the ground to about 80 km, with a vertical resolution of 1 km. Transport of nitrous oxide (N2O) with simplified photochemistry is included in the calculation to illustrate the influence of tropical circulations on the distribution of trace species. Diagnosis of model output reveals two distinct phases in the evolution of the zonal mean state on the equator. In early December, a strong and broad easterly jet appears near the stratopause in connection with a midlatitude wave event (sudden stratospheric warming) that reverses the winter westerlies of the Northern Hemisphere throughout the upper stratosphere. When the wave forcing dies out, the radiative drive allows the westerlies to recover at midlatitudes, while easterlies persist in the tropics. The resulting strong meridional gradient of the zonal mean wind provides favorable conditions for the development of inertial instability at lower latitudes. The meridional circulation associated with the instability shapes the 'nose' of the easterly jet, reducing the extension of the unstable region. In equinoctial conditions, a jet of westerlies appears in the lower equatorial mesosphere and descends to lower altitudes; positive accelerations associated with the descending westerlies are due primarily to Kelvin waves. The descent of the westerly jet does not reproduce well the observed behavior of the SAO westerly phase, either in amplitude or in the extent of downward propagation. As a consequence, the model does not simulate the 'double peak' observed in the tropical distribution of N2O. Comparison of wave amplitudes in the model with those derived from satellite observations shows that the calculated amplitudes are larger than observed in the upper stratosphere. It follows that inadequate Kelvin wave forcing is not the cause of the weak westerly phase in the model, and that some other mechanism must be responsible for the generation of the strong westerly phase observed.

Sassi, Fabrizio↗
DOE OSTI2021

Explaining an unusual electromigration behavior—A comprehensive experimental and theoretical analysis using finite element method

In metallic interconnects, it is generally assumed that electromigration (EM) failure location is independent of the applied electrical current and always occurs at the highest-current-density area. Our experiments show otherwise. We designed an Al interconnect that alters its failure location by only varying the applied current density. The failure occurs near the high for a current above 2 × 10 7 A/cm 2 , but at a location with 59% of the maximum for lower current densities. Thermoreflectance thermal imaging is employed to gather time-dependent high-resolution spatial temperature distributions of the Al interconnect during EM. More importantly, we propose a computationally inexpensive 2D finite element method that tracks EM evolution in time and matches well with the observations from different experimental conditions. A detailed analysis covering the major driving forces of EM is carried out to understand the complex physics behind EM. The atomic depletion rate contributed by each force is quantitatively studied. By examining the results from every tested experimental condition, the model reveals that the temperature gradient is the key reason causing atomic depletion near the failure location. Graphical illustrations and qualitative analysis are provided to intuitively show the key findings of our work.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Thermo-hydro-mechanical analysis of subsurface ice-based thermal energy storage

Ice-based thermal energy storage systems are widely utilized for cooling and managing peak electrical demand globally, offering daily or weekly storage capabilities for both individual homes and larger office buildings. However, scaling these systems for district-level cooling or integrating them with renewable energy sources presents challenges, especially in accommodating larger volumes and addressing seasonal storage requirements in densely populated urban areas. This paper proposes a novel solution by evaluating subsurface ice-based thermal energy storage, in which the underground is subjected to seasonal freeze/thaw cycles. However, these cycles may influence ground behavior, affecting pore pressure and inducing ground movement. To systematically investigate these challenges, we enhance the TOUGH-FLAC simulator by integrating water/ice phase change capabilities and updating the effective stress–strain constitutive relation. Both modifications are validated against analytical solutions or experimental data. Through numerical simulations spanning a decade with ten seasonal freeze/thaw cycles, we evaluate the performance and long-term stability of a generic subsurface ice-based thermal energy storage system, considering factors such as ground permeability, freezing pipe spacing, freeze/thaw damage, and glycol solution temperature. The simulations indicate that ice formation induces pore pressure variations that drive seasonal surface heave and settlement, controlled by ground permeability, pipe spacing, and glycol solution temperature, along with tensile and localized shear deformation around freeze pipes. This highlights the need for accurate ground property characterization and geomechanical analysis for subsurface ice-based thermal energy storage.

Ground freezing↗
DOE OSTI2020

Inverted Region in Bimolecular Electron Transfer in Solution Enabled by Delocalization

Rate constants for bimolecular electron transfer (ET) increased with driving force, -ΔG°, reached a plateau, and then decreased in an inverted region. This rate data was described well by electron transfer theory subject to a diffusion-controlled limit. These were for ET from radical anions of polydecylthiophene (P3DT) to a series of acceptors in THF solution. When the donor was the smaller anion of quaterthiophene (T4 •- ) the inverted region was much less prominent, and still less so for when the donor was the anion of bithiophene (T2 •- ). Description of the data using ET theory identifies smaller electronic couplings for the highly-delocalized P3DT anions as enabling the inverted behavior: The presence of a Marcus inverted region is a consequence of delocalized electronic states. The results of this study further imply that electronic couplings smaller than usually found for molecules in contact could boost efficiency of energy storage by electron transfer, and identifies size-mismatch as an important concept in control of electronic couplings.

14 SOLAR ENERGY↗
DOE OSTI2024

The Radiation-Induced Fate of Fission Product Iodine in Molten Salts

Understand and Predict Radiation-Induced Iodine Speciation, Chemistry, and Transport in High-Temperature Molten Salts Award Number: DE-AC07-05ID1451 Gregory P. Holmbeck (Gregory.Holmbeck@inl.gov), Center for Radiation Chemistry Research, Idaho National Laboratory, 1955 N. Fremont Avenue Idaho Falls, ID, 83415, USA. Project Scope The goal of this Chemical and Materials Sciences to Advance Clean Energy Technologies and Low-Carbon Manufacturing project is to understand and predict the radiation-induced speciation, chemistry, and transport of fission product iodine in the triumvirate extremes of high-temperature, ionizing radiation, and corrosive molten salts. This missing fundamental information is critical for the accelerated development and deployment of safe, clean nuclear energy based on molten salt reactor (MSR) and pyrochemical reprocessing technologies. The central hypothesis driving this research is, the radiation-induced conversion of iodide will yield an extensive suite of transient and steady-state iodine radiolysis products that will alter the bulk chemical and physical properties of the irradiated molten salt system—the speciation, distribution, and chemical transport of which will be dictated by the composition and the availability of multivalent metal cations and metal alloy interfaces. To test this hypothesis, this project initiated three synergistic Research Objectives: (1) determine how the inclusion of iodine/iodide influences the chemical and physical properties of complex molten salt mixtures; (2) elucidate the speciation and fundamental chemical behavior of transient and steady-state iodine/iodide species formed by the irradiation of molten and solid salt mixtures; and (3) understand the influence of interfacial processes on determining the final disposition of iodine in high temperature molten salts, notably the structure and chemical speciation of iodine at metal-salt interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Carbon doping in GeTe drives differences in local structure and properties

Advances in low-power, energy-efficient information storage and computing require understanding and controlling the atomic and nanoscale structures of functional materials, such as phase-change materials. Phase-change memory technology enables nonvolatile, low-power memory in devices by storing information through reversible changes in a phase-change material's atomic structure (i.e., transformations between amorphous and crystalline phases) that have corresponding changes in properties, including electronic resistivity and optical reflectivity. Here, we apply complementary X-ray absorption spectroscopy and X-ray pair distribution function analyses to experimentally identify the local- and medium-range atomic structure differences of GeTe and C-doped GeTe thin films. Upon controlled heating, composition- and temperature-dependent atomic structure evolution in GeTe and C-doped GeTe films shows differences in bonding behavior and local structure that directly influence crystallization onset temperature. We find that the introduction of C interrupts Ge–Ge bonds in amorphous GeTe, altering the as-deposited structure to be more similar to the distorted rocksalt structure of crystalline α–GeTe. The change alters the response of the amorphous atomic structure to heating and also lowers the crystallization onset temperature, from 230 °C in GeTe to 220 °C in the C-doped film. The combined insights from both X-ray techniques provide understanding of structural transformations that enables the development and optimization of next-generation memory and computing materials.

36 MATERIALS SCIENCE↗
NASA NTRS1998

The Behavior of Total Lightning Activity in Severe Florida Thunderstorms

The development of a new observational system called LISDAD (Lightning Imaging Sensor Demonstration and Display) has enabled a study of severe weather in central Florida. The total flash rates for storms verified to be severe are found to exceed 60 flashes/min, with some values reaching 500 flashes/min. Similar to earlier results for thunderstorm microbursts, the peak flash rate precedes the severe weather at the ground by 5-20 minutes. A distinguishing feature of severe storms is the presence of lightning "jumps"-abrupt increases in flash rate in advance of the maximum rate for the storm. ne systematic total lightning precursor to severe weather of all kinds-wind, hail, tornadoes-is interpreted in terms of the updraft that sows the seeds aloft for severe weather at the surface and simultaneously stimulates the ice microphysics that drives the lightning activity.

Williams, Earle↗
DOE OSTI2025

Gapped commensurate antiferromagnetic response in a strongly underdoped model cuprate superconductor

It is a distinct possibility that spin fluctuations are the pairing interactions in numerous unconventional superconductors. In the high-transition-temperature (high-T c ) cuprates, superconductivity emerges upon doping antiferromagnetic Mott insulators, and spin fluctuations might furthermore drive unusual pseudogap phenomena. Here we use magnetic neutron scattering to study the highly underdoped cuprate HgBa 2 CuO 4+δ (hole concentration p ≈ 0.064). In contrast to prior results for other underdoped cuprates, we find no evidence of incommensurate magnetic order associated with spin-density-wave or stripe correlations. Instead, the antiferromagnetic response in both the superconducting and pseudogap states is gapped below Δ AF ≈ 6 meV, commensurate over a wide energy range, and disperses above about 55 meV. Given the pristine nature of HgBa 2 CuO 4+δ , which exhibits high structural symmetry and minimal point disorder effects, this behavior likely signifies the unmasked response of the underlying CuO 2 planes near the Mott-insulating state. These results serve as a benchmark for a refined theoretical understanding of the cuprates.

Materials science↗
NASA NTRS2004

Planning for rover opportunistic science

The Mars Exploration Rover Spirit recently set a record for the furthest distance traveled in a single sol on Mars. Future planetary exploration missions are expected to use even longer drives to position rovers in areas of high scientific interest. This increase provides the potential for a large rise in the number of new science collection opportunities as the rover traverses the Martian surface. In this paper, we describe the OASIS system, which provides autonomous capabilities for dynamically identifying and pursuing these science opportunities during longrange traverses. OASIS uses machine learning and planning and scheduling techniques to address this goal. Machine learning techniques are applied to analyze data as it is collected and quickly determine new science gods and priorities on these goals. Planning and scheduling techniques are used to alter the behavior of the rover so that new science measurements can be performed while still obeying resource and other mission constraints. We will introduce OASIS and describe how planning and scheduling algorithms support opportunistic science.

artificial intelligence↗
DOE OSTI2020

Fungal social barriers: to fuse, or not to fuse, that is the question

Cell fusion takes place in all domains of life and contributes greatly to the formation of complex multicellular structures. In particular, many fungi, such as the filamentous Neurospora crassa, rely on conspecific somatic cell fusion to drive the unicellular-to-multicellular transition and formation of the interconnected mycelial syncytium. This can, however, lead to the transmission of infectious elements and deleterious genotypes that have a negative impact on the organismal fitness. Accumulating evidence obtained from natural populations suggests that N. crassa has evolved various self/non-self or allorecognition systems to avoid fusion between genetically non-identical spores or hyphae at all costs. Here we present an overview of the recent advances made in the field of fungal allorecognition, describe its genetic basis, and comment on its evolutionary meaning. These data pinpoint the multilayered complexity of the cooperative social behaviors undertaken by a model eukaryotic microbe.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1997

The Joint Damping Experiment (JDX)

The Joint Damping Experiment (JDX), flown on the Shuttle STS-69 Mission, is designed to measure the influence of gravity on the structural damping of a high precision three bay truss. Principal objectives are: (1) Measure vibration damping of a small-scale, pinjointed truss to determine how pin gaps give rise to gravity-dependent damping rates; (2) Evaluate the applicability of ground and low-g aircraft tests for predicting on-orbit behavior; and (3) Evaluate the ability of current nonlinear finite element codes to model the dynamic behavior of the truss. Damping of the truss was inferred from 'Twang' tests that involve plucking the truss structure and recording the decay of the oscillations. Results are summarized as follows. (1) Damping, rates can change by a factor of 3 to 8 through changing the truss orientation; (2) The addition of a few pinned joints to a truss structure can increase the damping by a factor as high as 30; (3) Damping is amplitude dependent; (4) As gravity induced preloads become large (truss long axis perpendicular to gravity vector) the damping is similar to non-pinjointed truss; (5) Impacting in joints drives higher modes in structure; (6) The torsion mode disappears if gravity induced preloads are low.

Folkman, Steven L.↗