Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Vortex flow structures and interactions for the optimum thrust efficiency of a heaving airfoil at different mean angles of attack

The thrust efficiency of a two-dimensional heaving airfoil is studied computationally for a low Reynolds number using a vortex force decomposition. The auxiliary potentials that separate the total vortex force into lift and drag (or thrust) are obtained analytically by using an elliptic airfoil. With these auxiliary potentials, the added-mass components of the lift and drag (or thrust) coefficients are also obtained analytically for any heaving motion of the airfoil and for any value of the mean angle of attack α. The contributions of the leading- and trailing-edge vortices to the thrust during their down- and up-stroke evolutions are computed quantitatively with this formulation for different dimensionless frequencies and heave amplitudes (St{sub c} and St{sub a}) and for several values of α. Very different types of flows, periodic, quasi-periodic, and chaotic described as St{sub c}, St{sub a}, and α, are varied. The optimum values of these parameters for maximum thrust efficiency are obtained and explained in terms of the interactions between the vortices and the forces exerted by them on the airfoil. As in previous numerical and experimental studies on flapping flight at low Reynolds numbers, the optimum thrust efficiency is reached for intermediate frequencies (St{sub c} slightly smaller than one) and a heave amplitude corresponding to an advance ratio close to unity. The optimal mean angle of attack found is zero. The corresponding flow is periodic, but it becomes chaotic and with smaller average thrust efficiency as |α| becomes slightly different from zero.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observing the semiconducting band-gap alignment of MoS{sub 2} layers of different atomic thicknesses using a MoS{sub 2}/SiO{sub 2}/Si heterojunction tunnel diode

We demonstrate a tunnel diode composed of a vertical MoS{sub 2}/SiO{sub 2}/Si heterostructure. A MoS{sub 2} flake consisting four areas of different thicknesses functions as a gate terminal of a silicon field-effect transistor. A thin gate oxide allows tunneling current to flow between the n-type MoS{sub 2} layers and p-type Si channel. The tunneling-current characteristics show multiple negative differential resistance features, which we interpret as an indication of different conduction-band alignments of the MoS{sub 2} layers of different thicknesses. The presented tunnel device can be also used as a hybrid-heterostructure device combining the advantages of two-dimensional materials with those of silicon transistors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Filamentation induced by collinear femtosecond double pulses with different wavelengths in air

Filamentation induced by collinear femtosecond double pulses with different wavelengths (400 nm + 800 nm) in air is investigated by measuring the filament spectra along the propagation axis. By changing their energies and the time delay between them, the role of each pulse in the filamentation is investigated. Though the two pulses do not overlap in time, the filament generated by the previous pulse will interact with the latter one, thus affecting the filamentation process. Each pulse plays a different role when the time delay and input energy are different: As the energy of the 800 nm pulse is relative high (∼600 μJ), the 400 nm pulse has inhibitory and supplementary effects on the filament generated by the 800 nm one as it is prior to and behind the 800 nm one, respectively, which ultimately influences the filament length and strength; however, as energy of the 800 nm pulse decreases to 340 μJ, the filament mainly results from the 400 nm pulse and the 800 nm one just plays an auxiliary role. This study provides an effective way to control filamentation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structures of the fractional spaces generated by the difference neutron transport operator

The initial boundary value problem for the neutron transport equation is considered. The first, second and third order of accuracy difference schemes for the approximate solution of this problem are presented. Highly accurate difference schemes for neutron transport equation based on Padé approximation are constructed. In applications, stability estimates for solutions of difference schemes for the approximate solution of the neutron transport equation are obtained.The positivity of the neutron transport operator in Slobodeckij spaces is proved. Numerical techniques are developed and algorithms are tested on an example in MATLAB.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shape control of the magnetic iron oxide nanoparticles under different chain length of reducing agents

We report on the effect of using reducing agents with different chain-length on the synthesis of iron oxide nanoparticles by thermal decomposition of iron (III) acetylacetonate in 1-octadecene. This modification allows us to control the shape of nanoparticles into spherical and cubic iron oxide nanoparticles. The highly monodisperse 14 nm spherical nanoparticles are obtained under 1,2-dodecanediol and average 14 nm edge-length cubic iron oxide nanoparticles are obtained under 1,2-tetradecanediol. The structural characterization such as transmission electron microscope (TEM) and X-ray diffraction (XRD) shows similar properties between two particles with different shapes. The vibrating sample magnetometer (VSM) shows no significant difference between spherical and cubic nanoparticles, which are 36 emu/g and 37 emu/g respectively and superparamagnetic in nature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synchronized vortex shedding and sound radiation from two side-by-side rectangular cylinders of different cross-sectional aspect ratios

Synchronized vortex shedding from two side-by-side cylinders and the associated sound radiation were examined experimentally at Reynolds numbers of the order of 10{sup 4} in low-Mach-number flows. In addition to a pair of square cylinders, a pair of rectangular cylinders, one with a square cross section (d × d) and the other with a rectangular cross section (d × c) having a cross-sectional aspect ratio (c/d) of 1.2–1.5, was considered. The center-to-center distance between the two cylinders L/d was 3.6, 4.5, and 6.0; these settings were within the non-biased flow regime for side-by-side square cylinders. In case of a square cylinder pair, anti-phase synchronized vortex shedding occurring for L/d = 3.6 and 4.5 generated a quadrupole-like sound source which radiated in-phase, planar-symmetric sound in the far field. Synchronized vortex shedding from the two rectangular cylinders with different c/d also occurred with almost the same frequency as the characteristic frequency of the square-cylinder wake in the case of the small center-to-center distance, L/d = 3.6, for all the cylinder pairs examined. The synchronized sound field was anti-phase and asymmetric in amplitude, unlike the case of a square cylinder pair. For larger spacing L/d = 4.5, synchronized vortex shedding and anti-phase sound still occurred, but only for close cross-sectional aspect ratios (c/d = 1.0 and 1.2), and highly modulated sound was radiated with two different frequencies due to non-synchronized vortex shedding from the two cylinders for larger differences in c/d. It was also found that when synchronized vortex shedding occurred, near-wake velocity fluctuations exhibited high spanwise-coherency, with a very sharp spectral peak compared with the single-cylinder case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distribution of distances between dislocations in different types of dislocation substructures in deformed Cu-Al alloys

The aim of the investigation was the determination of the statistic description of dislocation distribution in each dislocation substructures component forming after different deformation degrees in the Cu-Al alloys. The dislocation structures were investigated by the transmission diffraction electron microscopy method. In the work the statistic description of distance distribution between the dislocations, dislocation barriers and dislocation tangles in the deformed Cu-Al alloys with different concentration of Al and test temperature at the grain size of 100 µm was carried out. It was established that the above parameters influence the dislocation distribution in different types of the dislocation substructures (DSS): dislocation chaos, dislocation networks without disorientation, nondisoriented and disoriented cells, in the walls and inside the cells. The distributions of the distances between dislocations in the investigated alloys for each DSS type formed at certain deformation degrees and various test temperatures were plotted.

36 MATERIALS SCIENCE↗

Magnonics: Selective heat production in nanocomposites with different magnetic nanoparticles

We theoretically study Ferromagnetic Resonance (FMR) in nanocomposites focusing on the analysis of heat production. It is demonstrated that at the FMR frequency, the temperature of nanoparticles can be raised at the rate of a few degrees per second at the electromagnetic (EM) irradiation power equivalent to the sunlight power. Thus, using FMR, one can initiate either surface or bulk reaction in the vicinity of a particular magnetic inclusion by purposely delivering heat to the nanoscale at a sufficiently fast rate. We examined the FMR features in (a) the film with a mixture of nanoparticles made of different materials; (b) the laminated films where each layer is filled with a particular type of magnetic nanoparticles. It is shown that different nanoparticles can be selectively heated at the different bands of EM spectrum. This effect opens up new exciting opportunities to control the microwave assisted chemical reactions depending on the heating rate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Communication: A difference density picture for the self-consistent field ansatz

We formulate self-consistent field (SCF) theory in terms of an interaction picture where the working variable is the difference density matrix between the true system and a corresponding superposition of atomic densities. As the difference density matrix directly represents the electronic deformations inherent in chemical bonding, this “difference self-consistent field (dSCF)” picture provides a number of significant conceptual and computational advantages. We show that this allows for a stable and efficient dSCF iterative procedure with wholly single-precision Coulomb and exchange matrix builds. We also show that the dSCF iterative procedure can be performed with aggressive screening of the pair space. These approximations are tested and found to be accurate for systems with up to 1860 atoms and >10 000 basis functions, providing for immediate overall speedups of up to 70% in the heavily optimized TERACHEM SCF implementation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An investigation of wear behaviors of different Monel alloys produced by powder metallurgy

In the present study, wear behaviors of Monel 400, Monel 404, Monel R-405 and Monel K-500 alloys produced by Powder Metallurgy (P/M) method were investigated. These compounds prepared from elemental powders were cold-pressed (600 MPa) and then, sintered at 1150°C for 2 hours and cooled down to the room temperature in furnace environment. Monel alloys produced by the P/M method were characterized through scanning electron microscope (SEM+EDS), X-ray diffraction (XRD), hardness and density measurements. In wear tests, standard pin-on-disk type device was used. Specimens produced within four different Monel Alloys were tested under 1ms{sup −1} sliding speed, under three different loads (20N, 30N and 40N) and five different sliding distances (400-2000 m). The results show that Monel Alloys have γ matrix and that Al{sub 0,9}Ni{sub 4,22} intermetallic phase was formed in the structure. Also, the highest hardness value was measured with the Monel K-500 alloy. In wear tests, the maximum weight loss according to the sliding distance, was observed in Monel 400 and Monel 404 alloys while the minimum weight loss was achieved by the Monel K-500 alloy.

36 MATERIALS SCIENCE↗

Tuning the charge states of CrW{sub 2}O{sub 9} clusters deposited on perfect and defective MgO(001) surfaces with different color centers: A comprehensive DFT study

The structures and electronic properties of bimetallic oxide CrW{sub 2}O{sub 9} clusters supported on the perfect and defective MgO(001) surfaces with three different color centers, F{sub S}{sup 0}, F{sub S}{sup +}, and F{sub S}{sup 2+} centers, respectively, have been investigated by density functional theory calculations. Our results show that the configurations, adsorption energies, charge transfers, and bonding modes of dispersed CrW{sub 2}O{sub 9} clusters are sensitive to the charge states of the F{sub S} centers. Compared with the gas-phase configuration, the CrW{sub 2}O{sub 9} clusters supported on the defective surfaces are distorted dramatically, which exhibit different chain structures. On the perfect MgO surface, the depositions of clusters do not involve obvious charge transfer, while the situation is quite different on the defective MgO(001) surfaces in which significant electron transfer occurs from the surface to the cluster. Interestingly, this effect becomes more remarkable for electron-rich oxygen vacancies (F{sub S}{sup 0} center) than that for electron-poor oxygen vacancies (F{sub S}{sup +} and F{sub S}{sup 2+} centers). Furthermore, our work reveals a progressive Brønsted acid sites where spin density preferentially localized around the Cr atoms not the W atoms for all kinds of F{sub S}-centers, indicating the better catalytic activities can be expected for CrW{sub 2}O{sub 9} cluster on defective MgO(001) surfaces with respect to the W{sub 3}O{sub 9} cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aggregation in charged nanoparticles solutions induced by different interactions

Small-angle neutron scattering (SANS) has been used to study the aggregation of anionic silica nanoparticles as induced through different interactions. The nanoparticle aggregation is induced by addition of salt (NaCl), cationic protein (lysozyme) and non-ionic surfactant (C12E10) employing different kind of interactions. The results show that the interaction in presence of salt can be explained using DLVO theory whereas non-DLVO forces play important role for interaction of nanoparticles with protein and surfactant. The presence of salt screens the repulsion between charged nanoparticles giving rise to a net attraction in the DLVO potential. On the other hand, strong electrostatic attraction between nanoparticle and oppositely charged protein leads to protein-mediated nanoparticle aggregation. In case of non-ionic surfactant, the relatively long-range attractive depletion interaction is found to be responsible for the particle aggregation. Interestingly, the completely different interactions lead to similar kind of aggregate morphology. The nanoparticle aggregates formed are found to have mass fractal nature having a fractal dimension (~2.5) consistent with diffusion limited type of fractal morphology in all three cases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crank-Nicholson difference scheme for a stochastic parabolic equation with a dependent operator coefficient

In the present paper, the Crank-Nicolson difference scheme for the numerical solution of the stochastic parabolic equation with the dependent operator coefficient is considered. Theorem on convergence estimates for the solution of this difference scheme is established. In applications, convergence estimates for the solution of difference schemes for the numerical solution of three mixed problems for parabolic equations are obtained. The numerical results are given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal conductivity of ternary III-V semiconductor alloys: The role of mass difference and long-range order

Thermal transport in bulk ternary III-V arsenide (III-As) semiconductor alloys was investigated using equilibrium molecular dynamics with optimized Albe-Tersoff empirical interatomic potentials. Existing potentials for binary AlAs, GaAs, and InAs were optimized to match experimentally obtained acoustic-phonon dispersions and temperature-dependent thermal conductivity. Calculations of thermal transport in ternary III-Vs commonly employ the virtual-crystal approximation (VCA), where the structure is assumed to be a random alloy and all group-III atoms (cations) are treated as if they have an effective weighted-average mass. Here, we showed that it is critical to treat atomic masses explicitly and that the thermal conductivity obtained with explicit atomic masses differs considerably from the value obtained with the average VCA cation mass. The larger the difference between the cation masses, the poorer the VCA prediction for thermal conductivity. The random-alloy assumption in the VCA is also challenged because X-ray diffraction and transmission electron microscopy show order in InGaAs, InAlAs, and GaAlAs epilayers. We calculated thermal conductivity for three common types of order (CuPt-B, CuAu-I, and triple-period-A) and showed that the experimental results for In 0.53 Ga 0.47 As and In 0.52 Al 0.48 As, which are lattice matched to the InP substrate, can be reproduced in molecular dynamics simulation with 2% and 8% of random disorder, respectively. Based on our research, thermal transport in ternary III-As alloys appears to be governed by the competition between mass-difference scattering, which is much more pronounced than the VCA suggests, and the long-range order that these alloys support.

36 MATERIALS SCIENCE↗

Multiple electron beam generation with different energies and comparable currents from a single cathode potential for high power traveling wave tubes (TWTs)

We present a technique for generating multiple electron beams with different energies and comparable currents from a single cathode stalk at a single potential using nested magnetically insulated coaxial diodes (MICDs). The application is for a multi-stream traveling wave tube. Particle-in-cell simulations are performed for an experimental parameter-based geometry where two thin-walled intense relativistic electron beams immersed in a strong uniform magnetic field propagate through a cylindrical vacuum channel. The analytically derived results are obtained by extending Fedosov’s solution for generating a hollow electron beam from an MICD on a cathode stalk in an infinite magnetic field. Two electron beams are generated and accelerated downstream assuming zero initial kinetic energy of the electrons from the cathodes. Results show both electron beam currents ranging from 66 to 2.8 kA with an energy difference ranging from 6% to 27% depending on voltages applied from 100 to 600 kV and the geometry of the two MICDs. An optimal geometry is a crucial factor in achieving the maximum energy difference between the electron beams for comparable currents. The analytical and numerical simulation results show good agreement. We are currently in the process of planning experiments using the electron beam accelerator (SINUS-6 at UNM) to validate the analytical and simulation results.

Islam, K. N. (ORCID:0000000214397710)↗

Different roles of elongation and triangularity in the H-mode pedestal height enhancement through strong plasma shaping

While the peeling–ballooning mode is known to be stabilized by strong plasma shaping in a high-confinement mode (H-mode), a significant difference is found in the roles of elongation and triangularity. The elongation mainly stabilizes the high-n ballooning branch, while the triangularity of the low-n peeling one with some destabilization of the high-n ballooning one, where n is the toroidal mode number. This difference is conjectured mainly due to the magnetic shear effect which is substantially enhanced in a high triangularity regime, giving a destabilization on the ballooning branch, while a stabilization on the peeling one. As shown here, an important consequence of these different roles of the two shape parameters is that they should work together to stabilize simultaneously both branches of the PBM, implying the necessity of synergy between them for the large pedestal height enhancement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sparsity of the electron repulsion integral tensor using different localized virtual orbital representations in local second-order Møller–Plesset theory

Utilizing localized orbitals, local correlation theory can reduce the unphysically high system-size scaling of post-Hartree–Fock (post-HF) methods to linear scaling in insulating molecules. The sparsity of the four-index electron repulsion integral (ERI) tensor is central to achieving this reduction. For second-order Møller–Plesset theory (MP2), one of the simplest post-HF methods, only the (ia|jb) ERIs are needed, coupling occupied orbitals i, j and virtuals a, b. In this paper, we compare the numerical sparsity (called the “ragged list”) and two other approaches revealing the low-rank sparsity of the ERI. The ragged list requires only one set of (localized) virtual orbitals, and we find that the orthogonal valence virtual-hard virtual set of virtuals originally proposed by Subotnik et al. gives the sparsest ERI tensor. To further compress the ERI tensor, the pair natural orbital (PNO) type representation uses different sets of virtual orbitals for different occupied orbital pairs, while the occupied-specific virtual (OSV) approach uses different virtuals for each occupied orbital. Here, our results indicate that while the low-rank PNO representation achieves significant rank reduction, it also requires more memory than the ragged list. The OSV approach requires similar memory to that of the ragged list, but it involves greater algorithmic complexity. An approximation (called the “fixed sparsity pattern”) for solving the local MP2 equations using the numerically sparse ERI tensor is proposed and tested to be sufficiently accurate and to have highly controllable error. A low-scaling local MP2 algorithm based on the ragged list and the fixed sparsity pattern is therefore promising.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Difference in neoclassical edge flows between strongly negative and positive triangularities in the XGC gyrokinetic simulation

The neoclassical baseline study of a strongly negative triangularity (NT) plasma and the corresponding positive triangularity (PT) plasma is performed using the edge-specialized, total-f gyrokinetic code (X-point Gyrokinetic Code, XGC). A DIII-D-like plasma is used, based on the negative triangularity discharge of DIII-D #193 793. An artificial positive triangularity (PT) equilibrium has been constructed to compare the edge rotation physics at the same triangularity strength but with opposite sign, while keeping the same elongation and other geometric parameters. Carbon(6+) ions are added to the deuterium plasma at an experimentally relevant level. By using the experimental profile of carbon toroidal rotation profile as an input, XGC finds that the deuteron rotation is significantly different from the carbon rotation at the inboard and outboard midplanes, mostly caused by the difference in the Pfirsch–Schlüter rotation. More importantly, a significant difference in the X-point orbit loss physics, thus the rotation source, is found between the positive and negative triangularity equilibrium models. However, it is also found that the agreement between the present neoclassical simulation and the experimental NT data is validated only within the middle of the pedestal slope, indicating the importance of edge turbulence. Finally, this study could establish a baseline for the multiphysics, multiscale studies that include turbulence of negative triangularity plasmas.

Deuterium↗