SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This paper will present the lethality data that has been collected at this time and the planned future studies. The results show that rapid ramp-up heating times are critical to obtaining valid lethality data at high temperatures because an extensive number of spores are killed before reaching the target temperature. Exploratory experiments have also been performed using a laser to rapidly heat coupons.
The Gravity Recovery And Interior Laboratory (GRAIL) mission was the first Jet Propulsion Laboratory (JPL) project initiated under NASA's revised rules for space flight project management, NPR 7120.5D, "NASA Space Flight Program and Project Management Requirements." NASA selected GRAIL through a competitive Announcement of Opportunity process and funded its Phase B Preliminary Design effort. The team's first major milestone was a JPL institutional milestone, the Project Mission System Review (PMSR), which proved an excellent tune-up for the end-of-Phase-B NASA life-cycle review, the Preliminary Design Review (PDR). Building on JPL experience on the Prometheus and Juno projects, the team successfully organized for and conducted these reviews on an aggressive schedule. For the Project Critical Design Review (CDR), lessons learned from the PDR and updated Standing Review Board (SRB) practices from the Agency were factored into the review preparation effort. Additionally, the review was held at the Principal Investigator's institution, the Massachusetts Institute of Technology, rather than at the project management center (JPL), which necessitated additional cross-country coordination steps. The PMSR, PDR, and CDR were design reviews and largely paper-oriented. For the System Integration Review (SIR), the project needed to transition to a hardware review and deal with paper in a very different manner. While many of the practices employed for the design reviews were modified and retained (e.g., review preparation team, gate products management, pre-reviews, SRB coordination), the review agenda, presentation style, and slide templates were significantly changed. A key success factor concerned the handling of project open paper, which was succinctly and effectively communicated to the SRB in presentations.This paper provides a brief overview of the GRAIL mission and its project management challenges, provides a detailed description of project SIR preparation and execution activities, including positive and negative lessons learned and identifies recommendations for future NASA (and non- NASA) project teams.
Tribocharging of particles is common in many processes including fine powder handling and mixing, printer toner transport and dust extraction. In a lunar environment with its high vacuum and lack of water, electrostatic forces are an important factor to consider when designing and operating equipment. Dust mitigation and management is critical to safe and predictable performance of people and equipment. The extreme nature of lunar conditions makes it difficult and costly to carryout experiments on earth which are necessary to better understand how particles gather and transfer charge between each other and with equipment surfaces. DEM (Discrete Element Modeling) provides an excellent virtual laboratory for studying tribocharging of particles as well as for design of devices for dust mitigation and for other purposes related to handling and processing of lunar regolith. Theoretical and experimental work has been performed pursuant to incorporating screened Coulombic electrostatic forces into EDEM Tm, a commercial DEM software package. The DEM software is used to model the trajectories of large numbers of particles for industrial particulate handling and processing applications and can be coupled with other solvers and numerical models to calculate particle interaction with surrounding media and force fields. In this paper we will present overview of the theoretical calculations and experimental data and their comparison to the results of the DEM simulations. We will also discuss current plans to revise the DEM software with advanced electrodynamic and mechanical algorithms.
Understanding the coupling between thermodynamics and propellant sloshing is important for cryogenic upper stages, especially during the lift-off phase and in missions including multiple engine restarts, as the fluid dynamic condition of the propellant is mainly influenced by various flight maneuvers. This paper describes the development and validation of a Volume of Fluid (VOF)-based CFD solver, Loci/STREAM-VOF, to the ullage collapse under violent later slosh conditions. Loci/STREAM-VOF is shown to be able to capture detailed slosh dynamics, including slosh frequency, non-linear slosh damping, and violent surface breakup due to forced acceleration. The comparison of surface shape and small drops formed during large amplitude slosh with experimental imagery shows excellent agreement throughout the sloshing period. Comparison of temperature histories in the ullage, at the gas-liquid interface, and inside liquid with the experiment conducted at JAXA also show very good agreement. The simulation points to a stratified temperature field inside the liquid near the interface, critical to the ullage pressure after the collapse. The predicted pressure collapse matches well with the experimental value due to sloshing. Parametric sensitivity studies suggest that high-fidelity Loci/STREM-VOF simulations can play an essential role in predicting the actual thermodynamics of ullage collapse when following the recommended simulation methodology.
A programmatic need for research and development to support parachute-based landing systems has not existed since the end of the Apollo missions in the mid-1970s. Now, a number of planned space programs require advanced landing capabilities for which the experience and technology base does not currently exist. New requirements for landing on land with controllable, gliding decelerators and for more effective impact attenuation devices justify a renewal of the landing technology development effort that existed during the Mercury, Gemini, and Apollo programs. A study was performed to evaluate the current and projected national capability in landing systems and to identify critical deficiencies in the technology base required to support the Assured Crew Return Vehicle and the Two-Way Manned Transportation System. A technology development program covering eight landing system performance issues is recommended.
Large, permanently-manned space platforms can provide exciting opportunities for discoveries in basic plasma and geoplasma sciences. The potential for these discoveries will depend very critically on the properties of the platform, its subsystems, and their abilities to fulfill a spectrum of scientific requirements. With this in mind, the planning of space station research initiatives and the development of attendant platform engineering should allow for the identification of critical science and technology issues that must be clarified far in advance of space station program implementation. An attempt is made to contribute to that process, with a perspective that looks to the development of the space station as a permanently-manned Spaceborne Ionospheric Weather Station. The development of this concept requires a synergism of science and technology which leads to several critical design issues. To explore the identification of these issues, the development of the concept of an Ionospheric Weather Station will necessarily touch upon a number of diverse areas. These areas are discussed.
The scaling behavior of sandpile models is investigated analytically. First, it is shown that sandpile models contain a set of domain walls, referred to as troughs, which bound regions that can experience avalanches. It is further shown that the dynamics of the troughs is governed by a simple set of rules involving birth, death, and coalescence events. A simple trough model is then introduced, and it is proved that the model has a phase transition with the density of the troughs as an order parameter and that, in the thermodynamic limit, the trough density goes to zero at the transition point. Finally, it is shown that the observed scaling behavior is a consequence of finite-size effects.
This paper will summarize the thirty-year history of Space Shuttle operations from the perspective of training in NASA Johnson Space Center's Mission Control Center. It will focus on training and development of flight controllers and instructors, and how training practices have evolved over the years as flight experience was gained, new technologies developed, and programmatic needs changed. Operations of human spaceflight systems is extremely complex, therefore the training and certification of operations personnel is a critical piece of ensuring mission success. Mission Control Center (MCC-H), at the Lyndon B. Johnson Space Center, in Houston, Texas manages mission operations for the Space Shuttle Program, including the training and certification of the astronauts and flight control teams. This paper will give an overview of a flight control team s makeup and responsibilities during a flight, and details on how those teams are trained and certified. The training methodology for developing flight controllers has evolved significantly over the last thirty years, while the core goals and competencies have remained the same. In addition, the facilities and tools used in the control center have evolved. These changes have been driven by many factors including lessons learned, technology, shuttle accidents, shifts in risk posture, and generational differences. Flight controllers will share their experiences in training and operating the Space Shuttle throughout the Program s history. A primary method used for training Space Shuttle flight control teams is by running mission simulations of the orbit, ascent, and entry phases, to truly "train like you fly." The audience will learn what it is like to perform a simulation as a shuttle flight controller. Finally, we will reflect on the lessons learned in training for the shuttle program, and how those could be applied to future human spaceflight endeavors.
A geotechnical centrifuge was used to investigate large body impacts onto planetary surfaces. At elevated gravity, it is possible to match various dimensionless similarity parameters which were shown to govern large scale impacts. Observations of crater growth and target flow fields have provided detailed and critical tests of a complete and unified scaling theory for impact cratering. Scaling estimates were determined for nonporous targets. Scaling estimates for large scale cratering in rock proposed previously by others have assumed that the crater radius is proportional to powers of the impactor energy and gravity, with no additional dependence on impact velocity. The size scaling laws determined from ongoing centrifuge experiments differ from earlier ones in three respects. First, a distinct dependence of impact velocity is recognized, even for constant impactor energy. Second, the present energy exponent for low porosity targets, like competent rock, is lower than earlier estimates. Third, the gravity exponent is recognized here as being related to both the energy and the velocity exponents.
Human space flight in the US and other space-faring countries is faced with a twin challenge that is likely to persist for many years: flat or declining budgets along with an expectation of continuing, significant achievements. A partial solution may involve increased participation by multiple commercial competitors with the promise - albeit yet to be fully demonstrated - of much-reduced costs. That said, most commercial goals are concentrated on low-Earth orbit (LEO) for the time being, leaving human trips beyond Earth orbit (BED) as governmental initiatives. The past decade, beginning with the 1999/2000 Decadal Planning Team (DPT)/NASA Exploration Team (NExT) human space flight studies for the White House Office of Management and Budget (http://history.nasa.gov/DPT/DPT.htm), can arguably be described as a Golden Age of engineering design, strategic planning, technology capability prioritization, and development programs on the International Space Station (ISS). However, cynics have criticized the same period as little more than PowerPoint presentations, and unfocused technology investments with only limited progress toward a goal of human space flight beyond the immediate vicinity of the Earth. We disagree with the cynics. Experience with the ISS on increasingly sophisticated capabilities have prepared international partners to deploy a major "stepping stone" for human space flight: a habitation system in free space beyond low-Earth orbit. Such an achievement would be a major milestone in human space flight and, very likely, an essential demonstration site for subsequent, very ambitious exploration missions such as to Mars. Developing critical capabilities for human voyages beyond LEO, such as Earth-Moon libration points, offers, as just one example, easy return to Earth within days (see, e.g., Farquhar 1971 (Aeronautics & Astronautics, July, p. 59ff), Thronson, Lester, and Talay 2011 (http://www.thespacereview.com/article/1756/1), and Lester 2012 (http://www.thespacereview.com/article/1650/1). Use of Earth-Moon libration points as sites for early demonstrations of capabilities necessary for human missions to Mars, for example, contrasts sharply with using missions to near-Earth asteroids (NEAs) for that purpose.
Astronauts experience sensorimotor disturbances during the initial exposure to microgravity and during the readapation phase following a return to a gravitational environment. These alterations may lead to disruption in the ability to perform mission critical functional tasks during and after these gravitational transitions. Astronauts show significant inter-subject variation in adaptive capability following gravitational transitions. The ability to predict the manner and degree to which each individual astronaut will be affected would improve the effectiveness of a countermeasure comprised of a training program designed to enhance sensorimotor adaptability. Due to this inherent individual variability we need to develop predictive measures of sensorimotor adaptability that will allow us to predict, before actual space flight, which crewmember will experience challenges in adaptive capacity. Thus, obtaining this information will allow us to design and implement better sensorimotor adaptability training countermeasures that will be customized for each crewmember's unique adaptive capabilities. Therefore the goals of this project are to: 1) develop a set of predictive measures capable of identifying individual differences in sensorimotor adaptability, and 2) use this information to design sensorimotor adaptability training countermeasures that are customized for each crewmember's individual sensorimotor adaptive characteristics. To achieve these goals we are currently pursuing the following specific aims: Aim 1: Determine whether behavioral metrics of individual sensory bias predict sensorimotor adaptability. For this aim, subjects perform tests that delineate individual sensory biases in tests of visual, vestibular, and proprioceptive function. Aim 2: Determine if individual capability for strategic and plastic-adaptive responses predicts sensorimotor adaptability. For this aim, each subject's strategic and plastic-adaptive motor learning abilities are assessed using a test of locomotor function designed specifically to delineate both mechanisms. Aim 3: Develop predictors of sensorimotor adaptability using brain structural and functional metrics. We will measure individual differences in regional brain volumes (structural MRI), white matter integrity (diffusion tensor imaging, or DTI), functional network integrity (resting state functional connectivity MRI), and sensorimotor adaptation task-related functional brain activation (functional MRI). We decided to complete the data collection for Specific Aims 1, 2 and 3 simultaneously on the same subjects to increase data capture. By having the same subjects perform all three specific aims we can enhance our ability to detect how a wider range of factors can predict adaptability in a specific individual. This provides a much richer database and potentially a better understanding of the predictive power of the selected factors. In this presentation I will discuss preliminary data obtained to date.
This is the authors' response to a set of criticisms regarding a previously published work. It briefly addresses the main criticisms. In particular, it explains why some papers identified as having some fundamental flaws were referenced in the original work without detailed exposition of those flaws. It also explains why parts of the conclusion criticized as being contradictory are, in fact, not. It further highlights the need for more publishing of scientific criticisms. In the December 2007, special issue of the Journal of Atmospheric Sciences devoted to the Workshop on Assimilation of Satellite Cloud and Precipitation Observations, the authors published an article summarizing the many critical issues that render observations of cloud and precipitation difficult to analyze. Essentially, these include the inaccuracies of both current instruments and the relationships between what is actually observed (infrared or microwave energy detected at the altitude of the satellite) to what is desired (e.g., estimates of cloud drop sizes or rain rates) and the chaotic nature of atmospheric behavior and the complex mathematics describing it. The paper also included recommendations for future research and brief descriptions of many previous works concerning the subject. One reader is now attempting to publish a criticism of that paper. Her three complaints are that there was insufficient explanation of the identification of some cited works as being fundamentally flawed, that as a review the paper should have referenced some works additional to those it did, and that two recommendations were contradictory. Each of these complaints is addressed briefly in this response. First we explain why a brief list of works cited in our paper were identified as "flawed" with only a brief explanation. The design and conduct of the experiments reported in those papers violate well-established fundamentals such that, once the errors are recognized, their interpretations are no longer supported. Unfortunately, over the years, no researchers have bothered to publish criticisms of those papers, such that there are now too many to address in any single paper not devoted to that purpose. Yet, those papers are so often cited that we could not simply ignore them. Furthermore, if we had cited them without warning our readers regarding their flaws, we would have perpetrated a great disservice. In our response, however, we do offer further explanation of why some details, neglected in these papers, are critical to proper scientific evaluation. Neither did we offer insufficient references. Although we intentionally did not claim to be a "review' paper, we did cite 100 papers. That number is approximately 5 times the usual amount cited in journal articles. Although we only referenced few papers published after 2005, that was because our manuscript was submitted in January 2006, with its final, editorially-reviewed form in June 2006. We therefore could not reference papers published after this date. The problem here is that our paper was "in press" for 18 months. Finally, we explain that a careful reading of our paper reveals that our recommendations are not contradictory. Essentially, although we recommend 2 very distinct research approaches, these are complimentary and either alone is insufficient to accelerate progress. In conclusion, we recommend that the scientific community expends greater effort in publishing careful scientific criticisms so that others do not face the same dilemma we did. Likely this requires some reward system for doing so.
Uncertainties in the manufacturing, fabrication process, material behavior, loads, and boundary conditions results in the variation of the stresses and strains induced in the flexures and its fatigue life. Past experience and the test data at material coupon levels revealed a significant amount of scatter of the fatigue life. Owing to these facts, the design of the flexure, using conventional approaches based on safety factor or traditional reliability based on similar equipment considerations does not provide a direct measure of reliability. Additionally, it may not be feasible to run actual long term fatigue tests due to cost and time constraints. Therefore it is difficult to ascertain material fatigue strength limit. The objective of the paper is to present a methodology and quantified results of numerical simulation for the reliability of flexures used in the Stirling convertor for their structural performance. The proposed approach is based on application of finite element analysis method in combination with the random fatigue limit model, which includes uncertainties in material fatigue life. Additionally, sensitivity of fatigue life reliability to the design variables is quantified and its use to develop guidelines to improve design, manufacturing, quality control and inspection design process is described.
Reviews of the evidence for magnetization of the moon found from discovery of remanence in lunar samples, direct measurements of fields on the surface of the moon, and direct and indirect determination of fields from lunar orbit. It is shown that the evidence implies that the fields are not only local but that regional properties are found though there is still no direct evidence for a global dipole moment. Limits on the detectibility of a global dipole are given and it is shown that the strength of magnetization for reasonable thermal gradients places possible dipole moments just below the threshold of detectibility of current experiments. The hypothesis of plate magnetics is reviewed. Current ideas regarding the source of the background magnetic field presumed responsible for the magnetization are critically considered. These are the dynamo hypothesis and primordial magnetization. Consequences of both are discussed and finally the constraints placed upon the thermal evolution of the moon are considered.
The final operations tests prior to Mars orbit insertion for Viking 1 are discussed together with the real-time operations support for the two months preceding this event. Several special operational strategies and procedures designed to optimize the DSN support during the critical planetary phases of the mission are described. The final phases of Network implementation for Viking and the support afforded to the radio science experiments and Mars radar observations are also included.
The paper examines the detailed time structure of high-energy (over 30 keV) electron precipitation along the morningside and dayside of the auroral zone. To this end, available high time resolution data from the Ogo 6 energetic electron experiment are analyzed. The relationship between trapped flux levels and degree of precipitation observed is studied from an observational standpoint and compared with the critical flux levels estimated by Kennel and Petschek (1966). A possible explanation within the general framework of the Kennel-Petschek theory of the observed burstlike precipitation episodes is presented, and the implications of these features for the average lifetime of electrons in drifting clouds are discussed.
An overview is presented of the remotely piloted research vehicle (RPRV) activities at the NASA Dryden Flight Research Facility from their beginning to the present. The development of RPRV's as flight test tools is discussed, and system configuration is presented. Solutions derived from human factors experience related to flight activities and pilot responses have contributed to overall system capability. The development and use of visual displays, which are a critical feature of successful RPRV flights, are discussed as well as directions for future RPRV efforts.
The Third International Sun-Earth Explorer satellite (ISEE-3) was rechristened Internation Cometary Explorer (ICE) when the spacecraft left the Earth-Moon system after a close Lunar flyby on 1983 December 22. On 1985 September 11, ICE will pass through the inner parts of the tail of Comet Giacobini-Zinner to obtain the first in-situ measurements of any comet. Since the spacecraft has no cameras, its trajectory will be determined only from radio tracking. Astrometric updates of Comet Giacobini-Zinner will be critical for the final targeting of the spacecraft to achieve a successful encounter. ICE's flyby of Comet Giacobini-Zinner will provide valuable experience for the astrometry needed to target other spacecraft to encounter Hally's Comet six months later.