Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corrections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

A quantitative comparison of corrective and perfective maintenance

This paper presents a quantitative comparison of corrective and perfective software maintenance activities. The comparison utilizes basic data collected throughout the maintenance process. The data collected are extensive and allow the impact of both types of maintenance to be quantitatively evaluated and compared. Basic statistical techniques test relationships between and among process and product data. The results show interesting similarities and important differences in both process and product characteristics.

Henry, Joel↗

Study of tropospheric correction for intercontinental GPS common-view time transfer

Current practice is to incorporate general empirical models of the troposphere, which depend only on the station height and the elevation of the satellite, in GPS time receivers used for common-view time transfer. Comparisons of these models with a semi-empirical model based on weather measurements show differences of several nanoseconds. This paper reports on a study of tropospheric correction during GPS common-view time transfer over a short baseline of about 700 km, and three long baselines of 6400 km, 9000 km and 9600 km. It is shown that the use of a general empirical model of the troposphere within a region where the climate is similar does not affect time transfer by more than a few hundreds of picoseconds. For the long distance links, differences between the use of a general empirical model and the use of a semi-empirical model reach several nanoseconds.

Lewandowski, Wlodzimierz W.↗

General relativistic corrections in the gamma-ray emission from pulsars

We examine the importance of general relativistic corrections to the production of gamma rays near the surface of a neutron star. Due to the change in the magnetic dipole field in curved spacetime, the polar cap angle decreases by 30% compared to flat spacetime. However, the curved photon trajectories compensate for the decrease in the polar cap angle, and, as a result, the pulse profile of the photons emitted parallel to the field is expected to be very similar in curved spacetime and in flat spacetime. We find that the curved spacetime metric significantly increases the magnitude of the magnetic field and, therefore, the attenuation coefficients of curvature radiation gamma rays for pair production in a magnetic field can be increased by factors as large as 100. As a resutl the survival distance of 1 GeV photons for pair production is decreased by a factor of 2 for B is approximately 10(exp 12) G.

Gonthier, P. L.↗

In-orbit performance of the COSTAR-corrected Faint Object Camera

The improvements due to the Corrective Optics Space Telescope Axial Replacement (COSTAR) on imaging with the Faint Object Camera (FOC) on board the Hubble Space Telescope (HST) are presented. The encircled energy performance is dramatically improved, such that 85% of the total light in the Point Spread Function (PSF) is now enclosed within a circle of radius 0.1 sec at 486 nm wavelength, compared to 18% in the spherically aberrated PSF. This is equivalent to a sensitivity increase of 1.6 mag. The effective angular resolution is also improved from 66 to 43 mas at 486 nm. These improvements are slightly offset by a 20% lower total throughput at visible wavelengths. The plate scale is changed from 22.3 mas/pixel to 14.35 mas/pixel, resulting in a decrease in the field of view from 11 x 11/sq arcsec to 7.3 x 7.3/sq arcsec for the workhorse 512 x 512 format.

Jedrzejewski, R. I.↗

A method for correcting aspect solution errors in ROSAT HRI observations of compact sources

X-ray point sources observed with the ROSAT High Resolution Imager (HRI) often appear elongated over scales of approximately 5 sec-10 sec from the image core. This elongation has been attributed to errors in the attitude correction as the satellite is wobbled during the observations, and affects sources with both soft and hard X-ray spectra. In this paper, I report the results of an attempt to rid a high signal-to-noise observation of the soft X-ray point source HZ 43 of its characteristic elongation. I divided the observation into 181 separate images, each containing photons from only a small region on the detector through which the source passed during the satellite's wobble. By measuring the positions of the individual image centroids, I found clear evidence for systematic offsets from a common mean by up to approximately +/- 3 sec in both right ascension and declination as a function of phase in the satellite wobble. Shifting the subimages to a common center and then restacking them into a single image measurably improved the symmetry of the point-spread function. HRI observations are wobbled primarily to smooth out variations in the pixel-to-pixel sensitivity of the detector and also to extend the lifetime of the microchannel plates in the detector since these decay at a given location as a function of the number of photons detected. However, the elongations introduced by the aspect errors inhibit the identification of possible extended X-ray emission associated with sources such as pulsars and active galactic nuclei. In light of these results, I suggest that until the aspect errors are understood, observations of compact sources, where this effect may be important, should not be wobbled.

Morse, Jon A.↗

Actuators Help Correct For Gravitational Bending Of Antenna

Force-actuator scheme devised to help correct for decrease, caused by gravitational bending, in gain of 34-m-diameter paraboloidal microwave antenna reflector used for tracking distant spacecraft and observing celestial radio sources. Also applicable to other antennas bending significantly under own weight, with consequent degradation of performance.

Levy, Roy↗

Error-correction coding

This report describes the progress made towards the completion of a specific task on error-correcting coding. The proposed research consisted of investigating the use of modulation block codes as the inner code of a concatenated coding system in order to improve the overall space link communications performance. The study proposed to identify and analyze candidate codes that will complement the performance of the overall coding system which uses the interleaved RS (255,223) code as the outer code.

Hinds, Erold W.↗

Ensuring correct rollback recovery in distributed shared memory systems

Distributed shared memory (DSM) implemented on a cluster of workstations is an increasingly attractive platform for executing parallel scientific applications. Checkpointing and rollback techniques can be used in such a system to allow the computation to progress in spite of the temporary failure of one or more processing nodes. This paper presents the design of an independent checkpointing method for DSM that takes advantage of DSM's specific properties to reduce error-free and rollback overhead. The scheme reduces the dependencies that need to be considered for correct rollback to those resulting from transfers of pages. Furthermore, in-transit messages can be recovered without the use of logging. We extend the scheme to a DSM implementation using lazy release consistency, where the frequency of dependencies is further reduced.

Janssens, Bob↗

Sensitivity Analysis of Flutter Response of a Wing Incorporating Finite-Span Corrections

Flutter analysis of a wing is performed in compressible flow using state-space representation of the unsteady aerodynamic behavior. Three different expressions are used to incorporate corrections due to the finite-span effects of the wing in estimating the lift-curve slope. The structural formulation is based on a Rayleigh-Pitz technique with Chebyshev polynomials used for the wing deflections. The aeroelastic equations are solved as an eigen-value problem to determine the flutter speed of the wing. The flutter speeds are found to be higher in these cases, when compared to that obtained without accounting for the finite-span effects. The derivatives of the flutter speed with respect to the shape parameters, namely: aspect ratio, area, taper ratio and sweep angle, are calculated analytically. The shape sensitivity derivatives give a linear approximation to the flutter speed curves over a range of values of the shape parameter which is perturbed. Flutter and sensitivity calculations are performed on a wing using a lifting-surface unsteady aerodynamic theory using modules from a system of programs called FAST.

Issac, Jason Cherian↗

Testing and Performance Analysis of the Multichannel Error Correction Code Decoder

This report provides the test results and performance analysis of the multichannel error correction code decoder (MED) system for a regenerative satellite with asynchronous, frequency-division multiple access (FDMA) uplink channels. It discusses the system performance relative to various critical parameters: the coding length, data pattern, unique word value, unique word threshold, and adjacent-channel interference. Testing was performed under laboratory conditions and used a computer control interface with specifically developed control software to vary these parameters. Needed technologies - the high-speed Bose Chaudhuri-Hocquenghem (BCH) codec from Harris Corporation and the TRW multichannel demultiplexer/demodulator (MCDD) - were fully integrated into the mesh very small aperture terminal (VSAT) onboard processing architecture and were demonstrated.

Soni, Nitin J.↗

Introduction to Forward-Error-Correcting Coding

This reference publication introduces forward error correcting (FEC) and stresses definitions and basic calculations for use by engineers. The seven chapters include 41 example problems, worked in detail to illustrate points. A glossary of terms is included, as well as an appendix on the Q function. Block and convolutional codes are covered.

Freeman, Jon C.↗

Correction of Single Frequency Altimeter Measurements for Ionosphere Delay

This study is a preliminary analysis of the accuracy of various ionosphere models to correct single frequency altimeter height measurements for Ionospheric path delay. In particular, research focused on adjusting empirical and parameterized ionosphere models in the parameterized real-time ionospheric specification model (PRISM) 1.2 using total electron content (TEC) data from the global positioning system (GPS). The types of GPS data used to adjust PRISM included GPS line-of-sight (LOS) TEC data mapped to the vertical, and a grid of GPS derived TEC data in a sun-fixed longitude frame. The adjusted PRISM TEC values, as well as predictions by IRI-90, a climatotogical model, were compared to TOPEX/Poseidon (T/P) TEC measurements from the dual-frequency altimeter for a number of T/P tracks. When adjusted with GPS LOS data, the PRISM empirical model predicted TEC over 24 1 h data sets for a given local time to with in a global error of 8.60 TECU rms during a midnight centered ionosphere and 9.74 TECU rms during a noon centered ionosphere. Using GPS derived sun-fixed TEC data, the PRISM parameterized model predicted TEC within an error of 8.47 TECU rms centered at midnight and 12.83 TECU rms centered at noon. From these best results, it is clear that the proposed requirement of 3-4 TECU global rms for TOPEX/Poseidon Follow-On will be very difficult to meet, even with a substantial increase in the number of GPS ground stations, with any realizable combination of the aforementioned models or data assimilation schemes.

Schreiner, William S.↗

Atmospheric Pre-Corrected Differential Absorption Techniques to Retrieve Columnar Water Vapor: Theory and Simulations

Two different approaches exist to retrieve columnar water vapor from imaging spectrometer data: (1) Differential absorption techniques based on: (a) Narrow-Wide (N/W) ratio between overlapping spectrally wide and narrow channels; (b) Continuum Interpolated Band Ratio (CIBR) between a measurement channel and the weighted sum of two reference channels. (2) Non-linear fitting techniques which are based on spectral radiative transfer calculations. The advantage of the first approach is computational speed and of the second, improved retrieval accuracy. Our goal was to improve the accuracy of the first technique using physics based on radiative transfer. Using a modified version of the Duntley equation, we derived an "Atmospheric Pre-corrected Differential Absorption" (APDA) technique and described an iterative scheme to retrieve water vapor on a pixel-by-pixel basis. Next we compared both, the CIBR and the APDA using the Duntley equation for MODTRAN3 computed irradiances, transmissions and path radiance (using the DISORT option). This simulation showed that the CIBR is very sensitive to reflectance effects and that the APDA performs much better. An extensive data set was created with the radiative transfer code 6S over 379 different ground reflectance spectra. The calculated relative water vapor error was reduced significantly for the APDA. The APDA technique had about 8% (vs. over 35% for the CIBR) of the 379 spectra with a relative water vapor error of greater than +5%. The APDA has been applied to 1991 and 1995 AVIRIS scenes which visually demonstrate the improvement over the CIBR technique.

Borel, Christoph C.↗

Correction for the STIS echelle blaze function

Using the Early Release Observation of 9 Comae, we demonstrate an iterative method for correcting Space Telescope Imaging Spectrograph (STIS) echelle spectra for the effects of the echelle ripple. This analytic approach allows the actual spectrum of interest to be used in the determination of its calibration. The late F star 9 Comae is not an ideal candidate for this method, due to the many absorption lines present in its E230M spectrum, yet, given this difficulty, the method still works quite well.

Heap, Sara R.↗

Empirical correction for earth sensor horizon radiance variation

A major limitation on the use of infrared horizon sensors for attitude determination is the variability of the height of the infrared Earth horizon. This variation includes a climatological component and a stochastic component of approximately equal importance. The climatological component shows regular variation with season and latitude. Models based on historical measurements have been used to compensate for these systematic changes. The stochastic component is analogous to tropospheric weather. It can cause extreme, localized changes that for a period of days, overwhelm the climatological variation. An algorithm has been developed to compensate partially for the climatological variation of horizon height and at least to mitigate the stochastic variation. This method uses attitude and horizon sensor data from spacecraft to update a horizon height history as a function of latitude. For spacecraft that depend on horizon sensors for their attitudes (such as the Total Ozone Mapping Spectrometer-Earth Probe-TOMS-EP) a batch least squares attitude determination system is used. It is assumed that minimizing the average sensor residual throughout a full orbit of data results in attitudes that are nearly independent of local horizon height variations. The method depends on the additional assumption that the mean horizon height over all latitudes is approximately independent of season. Using these assumptions, the method yields the latitude dependent portion of local horizon height variations. This paper describes the algorithm used to generate an empirical horizon height. Ideally, an international horizon height database could be established that would rapidly merge data from various spacecraft to provide timely corrections that could be used by all.

Hashmall, Joseph A.↗

Real-Gas Correction Factors for Hypersonic Flow Parameters in Helium

The real-gas hypersonic flow parameters for helium have been calculated for stagnation temperatures from 0 F to 600 F and stagnation pressures up to 6,000 pounds per square inch absolute. The results of these calculations are presented in the form of simple correction factors which must be applied to the tabulated ideal-gas parameters. It has been shown that the deviations from the ideal-gas law which exist at high pressures may cause a corresponding significant error in the hypersonic flow parameters when calculated as an ideal gas. For example the ratio of the free-stream static to stagnation pressure as calculated from the thermodynamic properties of helium for a stagnation temperature of 80 F and pressure of 4,000 pounds per square inch absolute was found to be approximately 13 percent greater than that determined from the ideal-gas tabulation with a specific heat ratio of 5/3.

Erickson, Wayne D.↗

Experimental Verification of Ocean Bounced GPS Signals and Analysis of their Application to Ionospheric Corrections for Satellite Altimetry

An algorithm is presented which uses observations of Global Positioning System (GPS) signals reflected from the ocean surface and acquired by a GPS receiver onboard an altimetric satellite to compute the ionospheric delay present in the altimeter measurement. This eliminates the requirement for a dual frequency altimeter for many Earth observing missions. A ground-based experiment is described which confirms the presence of these ocean-bounced signals and demonstrates the potential for altimeter ionospheric correction at the centimeter level.

Axelrad, P.↗