Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordinate system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Theory for noise of propellers in angular inflow with parametric studies and experimental verification

This report presents the derivation of a frequency domain theory and working equations for radiation of propeller harmonic noise in the presence of angular inflow. In applying the acoustic analogy, integration over the tangential coordinate of the source region is performed numerically, permitting the equations to be solved without approximation for any degree of angular inflow. Inflow angle is specified in terms of yaw, pitch, and roll angles of the aircraft. Since these can be arbitrarily large, the analysis applies with equal accuracy to propellers and helicopter rotors. For thickness and loading, the derivation is given in complete detail with working equations for near and far field. However, the quadrupole derivation has been carried only far enough to show feasibility of the numerical approach. Explicit formulas are presented for computation of source elements, evaluation of Green's functions, and location of observer points in various visual and retarded coordinate systems. The resulting computer program, called WOBBLE has been written in FORTRAN and follows the notation of this report very closely. The new theory is explored to establish the effects of varying inflow angle on axial and circumferential directivity. Also, parametric studies were performed to evaluate various phenomena outside the capabilities of earlier theories, such as an unsteady thickness effect. Validity of the theory was established by comparison with test data from conventional propellers and Prop Fans in flight and in wind tunnels under a variety of operating conditions and inflow angles.

Propeller acoustics↗
NASA NTRS1993

Generic hypersonic vehicle performance model

An integrated computational model of a generic hypersonic vehicle was developed for the purpose of determining the vehicle's performance characteristics, which include the lift, drag, thrust, and moment acting on the vehicle at specified altitude, flight condition, and vehicular configuration. The lift, drag, thrust, and moment are developed for the body fixed coordinate system. These forces and moments arise from both aerodynamic and propulsive sources. SCRAMjet engine performance characteristics, such as fuel flow rate, can also be determined. The vehicle is assumed to be a lifting body with a single aerodynamic control surface. The body shape and control surface location are arbitrary and must be defined. The aerodynamics are calculated using either 2-dimensional Newtonian or modified Newtonian theory and approximate high-Mach-number Prandtl-Meyer expansion theory. Skin-friction drag was also accounted for. The skin-friction drag coefficient is a function of the freestream Mach number. The data for the skin-friction drag coefficient values were taken from NASA Technical Memorandum 102610. The modeling of the vehicle's SCRAMjet engine is based on quasi 1-dimensional gas dynamics for the engine diffuser, nozzle, and the combustor with heat addition. The engine has three variable inputs for control: the engine inlet diffuser area ratio, the total temperature rise through the combustor due to combustion of the fuel, and the engine internal expansion nozzle area ratio. The pressure distribution over the vehicle's lower aft body surface, which acts as an external nozzle, is calculated using a combination of quasi 1-dimensional gas dynamic theory and Newtonian or modified Newtonian theory. The exhaust plume shape is determined by matching the pressure inside the plume, calculated from the gas dynamic equations, with the freestream pressure, calculated from Newtonian or Modified Newtonian theory. In this manner, the pressure distribution along the vehicle after body expansion surface is then determined. The aerodynamic modeling, the engine modeling, and the exhaust plume analysis are described in more detail. A description of the computer code used to perform the above calculations is given and an input/output example is then given. The computer code is available on a Macintosh floppy disk.

Chavez, Frank R.↗
NASA NTRS1993

The influence of primary and secondary orientations on the elastic response of a nickel-base single-crystal superalloy

The influence of primary orientation on the elastic response of a (001)-oriented nickel-base single-crystal superalloy, PWA 1480, was investigated under mechanical, thermal, and combined thermal and mechanical loading conditions using finite element techniques. Elastic stress analyses were performed using the MARC finite element code on a square plate of PWA 1480 material. Primary orientation of the single crystal superalloy was varied in increments of 2 deg, from 0 to 10 deg, from the (001) direction. Two secondary orientations (0 and 45 deg) were considered, with respect to the global coordinate system, as the primary orientation angle was varied. The stresses developed within the single crystal plate were determined for each loading condition. In this paper, the influence of the angular offset between the primary crystal orientation and the loading direction on the elastic stress response of the PWA 1480 plate is presented for different loading conditions. The influence of primary orientation angle, when constrained between the bounds considered, was not found to be as significant as the influence of the secondary orientation angle, which is not typically controlled.

Abdul-Aziz, Ali↗
NASA NTRS1992

Prediction of airfoil stall using Navier-Stokes equations in streamline coordinates

A Navier-Stokes procedure to calculate the flow about an airfoil at incidence was developed. The parabolized equations are solved in the streamline coordinates generated for an arbitrary airfoil shape using conformal mapping. A modified k-epsilon turbulence model is applied in the entire domain, but the eddy viscosity in the laminar region is suppressed artificially to simulate the region correctly. The procedure was applied to airfoils at various angles of attack, and the results are quite satisfactory for both laminar and turbulent flows. It is shown that the present choice of the coordinate system reduces the error due to numerical diffusion, and that the lift is accurately predicted for a wide range of incidence.

Choi, D. H.↗
NASA NTRS1991

Cometary apparitions - 1990-2010

Osculating orbital elements are listed (chronologically by perihelion passage time) for all periodic comets expected to arrive at perihelion during the 1990-2010 interval. Plots which make it possible to readily determine the earth-based viewing conditions of a particular cometary apparition are presented. These plots are drawn in a rotating coordinate system so that the sun-earth line is fixed for each apparition.

Yeomans, Donald K.↗
NASA NTRS1992

Some Aspects of Bifurcation Structure of Laminar Flow in Curved Ducts

A bifurcation study is made of laminar flow in curved ducts. The problem is formulated in a curvilinear coordinate system, and the governing equations, after orthogonal mapping is applied, are solved numerically by an iterative finite-difference method. Many computer runs were made with various duct cross-sections ranging from a circle to a square, to learn the transition of bifurcation structure with this change in cross-section and to reconcile the differences between them. In addition, a simpler technique is proposed to generate symmetric four-cell solutions in a circular pipe and a means is put forward to stabilize four-vortex structures in a complete cross-section.

Kao, Hsiao C.↗
NASA NTRS1992

Radiated noise of ducted fans

The differences in the radiated acoustic fields of ducted and unducted propellers of the same thrust operating under similar conditions are investigated. An FEM model is created for the generation, propagation, and radiation of steady, rotor alone noise and exit guide vane interaction noise of a ducted fan. For a specified number of blades, angular mode harmonic, and rotor angular velocity, the acoustic field is described in a cylindrical coordinate system reduced to only the axial and radial directions. It is found that, contrary to the usual understanding of the Tyler and Sofrin (1962) result, supersonic tip speed rotor noise can be cut off if the tip Mach number is only slightly in excess of unity and if the number of blades is relatively small. If there are many blades, the fundamental angular mode number is large, and the Tyler and Sofrin result for thin annuli becomes more relevant. Shrouding of subsonic tip speed propellers is a very effective means of controlling rotor alone noise.

Eversman, Walter↗
NASA NTRS1993

Inference of the angular velocity of plasma in the Jovian magnetosphere from the sweepback of magnetic field

The averaged angular velocity of plasma from magnetic observations is evaluated using plasma outflow rate as a parameter. New techniques are developed to calculate the normal and azimuthal components of the magnetic field in and near to the plasma sheet in a plasma sheet coordinate system. The revised field components differ substantially from the quantities used in previous analyses. With the revised field values, it appears that during the Voyager 2 flyby for an outflow rate of 2.5 x 10 exp 29 amu/s, the observed magnetic torque may be sufficient to keep the plasma in corotation to radial distances of 50 Rj in the postmidnight quadrant.

Khurana, Krishan K.↗
NASA NTRS1993

Propagation of high frequency jet noise using geometric acoustics

Spherical directivity of noise radiated from a convecting quadrupole source embedded in an arbitrary spreading jet is obtained by ray-tracing methods of geometrical acoustics. The six propagation equations are solved in their general form in a rectangular coordinate system. The noise directivity in the far field is calculated by applying an iteration scheme that finds the required radiation angles at the source resulting in propagation through a given observer point. Factors influencing the zone of silence are investigated. The caustics of geometrical acoustics and the exact locations where it forms is demonstrated by studying the variation in ray tube area obtained from transport equation. For a ring source convecting along the center-axis of an axisymmetric jet, the polar directivity of the radiated noise is obtained by an integration with respect to azimuthal directivity of compact quadrupole sources distributed on the ring. The Doppler factor is shown to vary slightly from point to point on the ring. Finally the scaling of the directivity pattern with power -3 of Doppler factor is investigated and compared with experimental data.

Khavaran, A.↗
NASA NTRS1993

An evaluation of three spatial differencing schemes for the discrete ordinates method in participating media

Three popular spatial differencing schemes for the discrete ordinates method are examined for two-dimensional Cartesian coordinates system. These are a positive, the step, and the diamond schemes. Contrary to the common belief that negative intensities will not occur when fine spatial discretization is used with the diamond scheme, under certain conditions, the diamond scheme will produce negative intensities irrespective of the number of control volums employed. The positive scheme can produce physically unrealistic trends. The diamond and positive schemes are also capable of producing physically unrealistic overshoots. In absorbing-emitting or absorbing-emitting-scattering media, grid refinement can result in negative intensities when the diamond or positive scheme is used.

Chai, John C.↗
NASA NTRS1993

On the generation of secondary motion in circular to rectangular transition ducts

A computer code has been developed for the calculation of three-dimensional turbulent flow in circular to rectangular transition ducts. The governing equations are written in a general curvilinear coordinate system so that all singly-connected geometrical configurations can be accommodated. Turbulence closure is through the standard k-epsilon model or a Reynolds stress closure model. Computed results show qualitative agreement with experimental data. Pressure-induced secondary flow is the dominant mode through the transition, but turbulence-induced secondary flow becomes prominent some distance downstream of the transition.

Demuren, A. O.↗
NASA NTRS1993

Waverider design for generalized shock geometries

A new design method for waverider configurations with generalized shock geometries is presented. A cross-stream Euler marching procedure is used to define the post-shock flow field, and an arbitrary 3D shock shape is specified as an input. This approach makes it possible to use nonaxisymmetric shock topologies with nonconstant shock strengths. The problem is reformulated in the proper curvilinear coordinate system to suppress its fundamental ill-posedness.

Jones, K. D.↗
NASA NTRS1992

Geodesy and cartography

An overview of geodesy and cartography of Mars over the past century is presented. The modern exploration began with the Mariner 4, 6, and 7 flyby missions, followed by the Mariner 9 and Viking missions that mapped the entire surface of Mars. The primary modern changes to the coordinate system have led to improved measurements of the rotational period, the direction of the spin axis, and the size and shape of Mars. Planimetric mapping based on Mariner 9 pictures began with a 1:25-M-scale sheet and 30 1:5-M-scale sheets that covered the entire Martian surface. The quality of the Viking Orbiter pictures was greatly improved over Mariner 9 and led to the publication of 140 controlled photomosaic sheets at a scale of 1:2 M. Two digital data bases have been compiled for Mars - the digital image model and the digital terrain model.

Davies, Merton E.↗
NASA NTRS1992

Thermocapillary Bubble Migration - An Oseen-Like Analysis of the Energy Equation

The thermocapillary migration of a bubble in a liquid possessing a temperature gradient is analyzed in the limit of large Reynolds and Marangoni numbers. Crespo and Manuel (1983) performed an analysis in this limit wherein energy conduction is completely neglected and obtained the bubble migration velocity using energy dissipation arguments. In the present analysis, performed in a coordinate system moving with the bubble, the velocity field in the convection term in the energy equation is approximated in an Oseen-like manner by replacing it with the velocity field far away from the bubble (i.e., the migration velocity of the bubble). Conduction is retained to satisfy the zero conductive heat flux boundary condition on the bubble surface. An approximate solution has been obtained for the Oseen-like energy equation. The bubble velocity obtained using energy dissipation considerations is in agreement with the result of Crespo and Manuel. The solution shows the thermal boundary layer and wake structure in the vicinity of the bubble. The Oseen-like analysis, however, has inherent limitations, as the flow penetrates the bubble surface. These issues are discussed and the result are compared to those in the literature.

Balasubramaniam, R.↗
NASA NTRS1993

The structure of a three-dimensional turbulent boundary layer

The three-dimensional turbulent boundary layer is shown to have a self-consistent two-layer asymptotic structure in the limit of large Reynolds number. In a streamline coordinate system, the streamwise velocity distribution is similar to that in two-dimensional flows, having a defect-function form in the outer layer which is adjusted to zero at the wall through an inner wall layer. An asymptotic expansion accurate to two orders is required for the cross-stream velocity which is shown to exhibit a logarithmic form in the overlap region. The inner wall-layer flow is collateral to leading order but the influence of the pressure gradient, at large but finite Reynolds numbers, is not negligible and can cause substantial skewing of the velocity profile near the wall. Conditions under which the boundary layer achieves self-similarity and the governing set of ordinary differential equations for the outer layer are derived. The calculated solution of these equations is matched asymptotically to an inner wall-layer solution and the composite profiles so formed describe the flow throughout the entire boundary layer. The effects of Reynolds number and cross-stream pressure gradient on the crossstream velocity profile are discussed and it is shown that the location of the maximum cross-stream velocity is within the overlap region.

Degani, A. T.↗
NASA NTRS1993

Multigrid methods and high order finite difference for flow in transition - Effects of isolated and distributed roughness elements

The high order finite difference and multigrid methods have been successfully applied to direct numerical simulation (DNS) for flow transition in 3D channels and 3D boundary layers with 2D and 3D isolated and distributed roughness in a curvilinear coordinate system. A fourth-order finite difference technique on stretched and staggered grids, a fully-implicit time marching scheme, a semicoarsening multigrid method associated with line distributive relaxation scheme, and a new treatment of the outflow boundary condition, which needs only a very short buffer domain to damp all wave reflection, are developed. These approaches make the multigrid DNS code very accurate and efficient. This makes us not only able to do spatial DNS for the 3D channel and flat plate at low computational costs, but also able to do spatial DNS for transition in the 3D boundary layer with 3D single and multiple roughness elements. Numerical results show good agreement with the linear stability theory, the secondary instability theory, and a number of laboratory experiments.

Liu, C.↗
NASA NTRS1993

Burnett solutions along the stagnation line of a cooled cylinder in low-density hypersonic flows

The Burnett equations in the cylindrical coordinate system have been applied to the hypersonic flow over a cylinder in low density environments. Through a local similarity transformation, the Burnett equations are degenerated into nonlinear third-order ordinary differential equations which are only valid along the stagnation line. These equations are solved by the multi-staged Runge-Kutta integration technique. Steady state solutions are asymptotically reached by the time-marching procedure. A newly-developed computer code is used to solve both the Navier-Stokes and the Burnett equations within the shock layer. The computed heat transfer coefficients are consistent with wind-tunnel and STS flight data. Comparisons with the DSMC solutions and the Boltzmann solutions show that the Burnett equations are more appropriate as the governing equations than the Navier-Stokes equations in the transitional flow regime.

Liaw, G. S.↗
NASA NTRS1993

Effect of curvature on stationary crossflow instability of a three-dimensional boundary layer

An incompressible three-dimensional laminar boundary-layer flow over a swept wing is used as a model to study both the wall-curvature and streamline-curvature effects on the stationary crossflow instability. The basic state is obtained by solving the full Navier-Stokes (N-S) equations numerically. The linear disturbance equations are cast on a fixed, body-intrinsic, curvilinear coordinate system. Those nonparallel terms which contribute mainly to the streamline-curvature effect are retained in the formulation of the disturbance equations and approximated by their local finite difference values. The resulting eigenvalue problem is solved by a Chebyshev collocation method. The present results indicate that the convex wall curvature has a stabilizing effect, whereas the streamline curvature has a destabilizing effect. A validation of these effects with an N-S solution for the linear disturbance flow is provided.

Lin, Ray-Sing↗