Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

A critical review of the life sciences project management at Ames Research Center for the Spacelab Mission development test 3

A management study was initiated by ARC (Ames Research Center) to specify Spacelab Mission Development Test 3 activities and problems. This report documents the problems encountered and provides conclusions and recommendations to project management for current and future ARC life sciences projects. An executive summary of the conclusions and recommendations is provided. The report also addresses broader issues relevant to the conduct of future scientific missions under the constraints imposed by the space environment.

Helmreich, R. L.↗

Titan's atmosphere: Comments on haze content, methane abundance, band shapes, and hydrogen upper limit

The existence of scatterers in Titan's atmosphere was demonstrated in a paper published in the Astrophysical Journal three years ago. This conclusion was not affected by recent laboratory investigations showing that certain CH4 bands are independent of pressure because it was shown that the reflecting layer model failed to explain Titan's CH4 absorptions regardless on which portion of the curve of growth Titan's CH4 lines lie. Saturn's atmosphere was utilized along the central meridian for studies of CH4 absorption, and to show that the conclusion is insensitive to the moderate scattering there. The quite pronounced role of scattering in Titan's atmosphere strongly suggests that Titan's surface is obscured.

Trafton, L.↗

Integrated orbital servicing study follow-on. Volume 1: Executive summary

Orbital maintenance concepts were investigated and the equipment for one-g demonstrations of axial and radial module exchange was designed in three control modes: manual direct control, supervisory control, and manually augmented control. Significant results obtained and the conclusions drawn are presented and discussed. The overall conclusion is that on-orbit servicing should be established as an ongoing space transportation system capability.

Derocher, W. L., Jr.↗

A comparison of linear acoustic theory with experimental noise data for a small-scale hovering rotor

Linear acoustic calculations based on full aerodynamic data as input are presented and compared with measured cases reported by Boxwell et al. (1978). The full aerodynamic data are obtained using three programs giving radial loading, chordwise loading, and chordwise position of transition. It is shown that in the theoretical results the most significant noise source mechanism is due to blade thickness. Thus the conclusions of Boxwell et al. as to the importance of nonlinearities around the blades are upheld. These conclusions concern the width, shape and the level of the acoustic pressure calculated from linear acoustic theory. Some of the approximations involved in the application of acoustic analogy using quadrupole sources are discussed. It is necessary that the near- and far-field problems of rotating blades be treated together as shown for the case of an oscillating sphere.

Farassat, F.↗

IUE observations of the quasar 3C 273

IUE observations indicate that the spectrum of 3C 273 is similar to that of other large-redshift quasars. There is a large excess of flux in the range 2400 A to 5300 A, which encompasses the Balmer jump region but which does not appear to be explainable by Balmer emission. The intensity ratio of Lyman-alpha to H-beta is 5.5, in agreement with other measures and a factor 6 smaller than the recombination value. The only absorption lines in the spectrum are due to our Galaxy. There is marginal evidence for a depression of the continuum shortward of the Lyman-alpha emission line, but the errors are too large to warrant any conclusion that 3C 273 has a rich absorption-line spectrum such as that seen in large-redshift quasars. The absence of emission and absorption lines of Fe II leads to the conclusion that resonance fluorescence probably produces the visual Fe II emission lines.

Boggess, A.↗

Geophysical observations pertaining to solid-state convection in the terrestrial planets

Observational evidence for solid-state convection in the interiors of the terrestrial planets is reviewed. For the earth, the motion of the lithospheric plates constitutes clear evidence of large-scale convection in the mantle. Although Mars has been found to lack evidence of plate tectonics, the morphology of the Tharsis uplift and the elevation dichotomy between the northern and southern hemispheres may be evidence of mantle convection at one time. Measurements of lunar heat flow and seismic Q imply a convective mechanism limited to the lower mantle. Evidence for internal convection on Mercury consists of its dipole magnetic field and the 3/2 resonance between its rotational motion and its orbital motion, both of which can also be explained by other processes. The limited radar imagery of Venus has not yet provided conclusive evidence of either the presence or absence of convection features. It is concluded that although interior convection in terrestrial planets is implied by rheological, energy and momentum considerations, only on earth is the lithosphere thin enough to provide conclusive evidence of convection.

Phillips, R. J.↗

Observations of Cygnus X-3 with the Einstein /HEAO 2/ X-ray Observatory The period derivative and the asymmetric X-ray light curve

Cygnus X-3 was observed by the Monitor Proportional Counter on the Einstein (HEAO 2) X-ray Observatory for 2.4 days in 1978 December. The analysis of the data from these observations is used in conjunction with a self-consistent re-examination of previous results from the Uhuru, ANS, COS B, and SAS 3 satellites to investigate earlier reports that the 4.8 hour period of Cygnus X-3 is increasing. It is found that there is indeed a period derivative, P = (1.78 plus or minus 0.40) x 10 to the -9th s/s, which confirms the principal conclusion of previous authors. The possibility that the X-ray source is in an elliptical orbit and that some, or all, of the observed period derivative may be due to apsidal motion is discussed. The elliptic orbit hypothesis explains the observed asymmetry in the average X-ray light curve and leads to the conclusion that the most likely companion to the X-ray source is a helium star, possibly with a light hydrogen envelope

Elsner, R. F.↗

Distribution of oxygen in silicon and its effects on electronic characteristics on a microscale

The microdistribution of oxygen in silicon was obtained by scanning IR absorption in as grown Czochralski crystals. The crystals were subsequently submitted to various heat treatments. The profiles of the generated thermal donors were determined by spreading resistance measurements. Contrary to the prevailing views, it was found that the concentration of the activated thermal donors is not strictly a function of the oxygen concentration, but depends strongly on an additional factor, which was shown to be associated with vacancy concentration. These conclusions could only be reached on the basis of microscale characterization. In fact, commonly employed macroscale analysis has led to erroneous conclusions.

Gatos, H. C.↗

Summary of flight technology workshop on radiometric calibration

The conclusions and recommendations from a three-day NASA sponsored workshop to assess deficiencies and shortcomings of previously flown electro-optical space sensors are summarized. Space technologists for NASA, NOAA, DOD, and industry also developed recommendations for improving instrumentation and calibration technology. The conclusions reached include the fact that the past knowledge of in-orbit radiometric accuracy has been poor relative to available calibration standards, whereas stringent accuracy requirements for planned NASA programs will require significant SOA improvements. The Shuttle contamination environment may also compromise future sensor accuracy. A number of panel recommendations to improve in-orbit accuracy of future sensors will be summarized, including one to establish a set of National Standards for Remote Sensors at NBS as a basis for long term accuracy.

Dodgen, J. A.↗

Survey of reader preferences concerning the format of NASA technical reports

A survey was conducted to determine the opinions of readers concerning the format (organization) of NASA technical reports and usage of technical report components. A survey questionnaire was sent to 513 LaRC engineers and scientists and 600 engineers and scientists from three (3) professional/technical societies. The response rates were 74 and 85 percent, respectively. The questionnaire included the order in which users read report components, the components reviewed or read to determine whether to read a report, report components which could be deleted, the desirability of a table of contents, the desirability of both a summary and abstract, the location of the symbols list and glossary, the integration of illustrative material, the preferred format for reference citations, column layout and right margin treatment, and person/voice. The results of the reader preference survey indicated that the conclusion was the component most often ready by survey respondents. The summary, conclusion, abstract, title page, and introduction were the components used most frequently to determine if a report would actually be read. Respondents indicated that a summary as well as an abstract should be included, that the definition of symbols and glossary of terms should be located in the front of the report, and that illustrative material should be integrated with the text rather than grouped at the end of the report. Citation by number was the preferred format for references. A one-column, ragged right margin was preferred. Third person, passive voice was the style of writing preferred by the respondents.

Pinelli, T. E.↗

Preserved signatures of ion flux modulations observed by ATS 6

The considered investigation is concerned with a detailed analysis of the event of August 13, 1974. The considered day was a geomagnetically quiet day, and ATS 6 was stationed at 94 deg W longitude. On the basis of the conducted analysis it is found that the observed flux oscillations may be a fossil signature of flux modulations which have occurred in ions at an earlier time and at a region away from the spot of observation. In conclusion, it is pointed out that the August 13, 1974, and the January 23, 1975, events of proton flux oscillations observed by ATS 6 are of great importance. They reveal another unique capability of the drifting particles for preserving small modulation signatures imposed upon them during earlier wave-particle interactions. At the present, no conclusions are drawn as to what kind of the wave-particle interaction process was responsible for the observation.

Su, S.-Y.↗

The intercrater plains of Mercury and the Moon: Their nature, origin and role in terrestrial planet evolution. Geologic mapping of Mercury and the Moon

The geologic framework of the intercrater plains on Mercury and the Moon as determined through geologic mapping is presented. The strategies used in such mapping are discussed first. Then, because the degree of crater degradation is applied to both mapping and crater statistics, the correlation of degradation classification of lunar and Mercurian craters is thoroughly addressed. Different imaging systems can potentially affect this classification, and are therefore also discussed. The techniques used in mapping Mercury are discussed in Section 2, followed by presentation of the Geologic Map of Mercury in Section 3. Material units, structures, and relevant albedo and color data are discussed therein. Preliminary conclusions regarding plains' origins are given there. The last section presents the mapping analyses of the lunar intercrater plains, including tentative conclusions of their origin.

Leake, M. A.↗

Non-intrusive flow measurements on a reentry vehicle

This study evaluates the utility of various non-intrusive techniques for the measurement of the flow field on the windward side of the Space Shuttle or a similar re-entry vehicle. Included are linear (Rayleigh, Raman, Mie, Laser Doppler Velocimetry, Resonant Doppler Velocimetry) and nonlinear (Coherent Anti-Stokes Raman, Laser Induced Fluorescence) light scattering, electron beam fluorescence, thermal emission and mass spectroscopy. Flow field properties are taken from a nonequilibrium flow model by Shinn, Moss and Simmonds at NASA Langley. Conclusions are, when possible, based on quantitative scaling of known laboratory results to the conditions projected. Detailed discussion with researchers in the field contributed further to these conclusions and provided valuable insights regarding the experimental feasibility of each of the techniques.

Miles, R. B.↗

Develop and test fuel cell powered on-site integrated total energy systems. Phase 3: Full-scale power plant development

Satisfactory performance is reported for the first three 12-cell sub-stacks of the 5 kW stack rebuild. Early general conclusions are presented from an economic study. Results are reported on a successful 700-hour test of a 3-cell stack in the full-sized configuration (0.33m x 0.56m). Construction of a 5 kW equivalent methanol/steam reformer based on a commercial shell-and-tube heat exchanger was completed. Several test runs are summarized. Preliminary conclusions are presented on the technical and economic aspects of fuel cell/HVAC interaction. Physical data are presented on several dense graphite materials which are candidates for gas-distribution plates. Performance of a new cathode catalyst is reported.

Source record↗

Forced, stationary waves in a linear, stratified, quasi-geostrophic atmosphere

A finite difference model and an approximate WKB analysis were employed to test the validity of three of the Smagorinsky conclusions (1953) regarding the influence of diabatic heating upon the resultant stationary eddies. The conclusions comprised a necessity of including surface friction to avoid resonance, to account for stratospheric influence to accurately estimate the magnitude of the disturbances in the upper third of the troposphere, and the adequacy of the linear model for describing the gross features of sea-level normals at middle and high latitudes. Results of the WKB analysis of the effects of orography and diabatic heating demonstrate that streamfunctions are produced when orography forces a stationary solution. The surface friction is concluded to have a negligible effect on the solutions when the wind speeds are low. The solutions, however, require the presence of a lid for the middle troposphere to eliminate resonance responses.

Roads, J. O.↗

Evaluation of non-intrusive flow measurement techniques for a re-entry flight experiment

This study evaluates various non-intrusive techniques for the measurement of the flow field on the windward side of the Space Shuttle orbiter or a similar reentry vehicle. Included are linear (Rayleigh, Raman, Mie, Laser Doppler Velocimetry, Resonant Doppler Velocimetry) and nonlinear (Coherent Anti-Stokes Raman, Laser-Induced Fluorescence) light scattering, electron-beam fluorescence, thermal emission, and mass spectroscopy. Flow-field properties were taken from a nonequilibrium flow model by Shinn, Moss, and Simmonds at the NASA Langley Research Center. Conclusions are, when possible, based on quantitative scaling of known laboratory results to the conditions projected. Detailed discussion with researchers in the field contributed further to these conclusions and provided valuable insights regarding the experimental feasibility of each of the techniques.

Miles, R. B.↗

Optimization methods applied to hybrid vehicle design

The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

Donoghue, J. F.↗

Tracking and data acquisition system for the 1990's. Volume 7: TDAS space technology assessment

The results of the TDAS and user spacecraft technology assessment effort are provided. For each TDAS Satellite enhancement and user spacecraft element previously enumerated, the technology issues are identified and the R&D needed to resolve these issues is delineated. Subsequently, taking into account developments taking place elsewhere, the addition unique TDAS satellite module and user spacecraft element R&D efforts needed are identified, and conclusions are drawn in each case. From these conclusions, it is evident that with additional unique R&D efforts carried out for TDAS and appropriate user spacecraft elements the desired TDAS' capabilities for the 1990's can be realized and user spacecraft can be implemented that adequately interface with the projected TDAS.

Khatri, R.↗