Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

The Splitting of Double-component Active Asteroid P/2016 J1 (PANSTARRS)

We present deep imaging observations, orbital dynamics, and dust-tail model analyses of the double-component asteroid P/2016 J1 (J1-A and J1-B). The observations were acquired at the Gran Telescopio Canarias (GTC) and the Canada–France–Hawaii Telescope (CFHT) from mid-March to late July of 2016. A statistical analysis of backward-in-time integrations of the orbits of a large sample of clone objects of P/2016 J1-A and J1-B shows that the minimum separation between them occurred most likely ∼2300 days prior to the current perihelion passage, i.e., during the previous orbit near perihelion. This closest approach was probably linked to a fragmentation event of their parent body. Monte Carlo dust-tail models show that those two components became active simultaneously ∼250 days before the current perihelion, with comparable maximum loss rates of ∼0.7 and ∼0.5 kg s{sup −1}, and total ejected masses of 8 × 10{sup 6} and 6 × 10{sup 6} kg for fragments J1-A and J1-B, respectively. Consequently, the fragmentation event and the present dust activity are unrelated. The simultaneous activation times of the two components and the fact that the activity lasted 6–9 months or longer, strongly indicate ice sublimation as the most likely mechanism involved in the dust emission process.

79 ASTRONOMY AND ASTROPHYSICS↗

Operational-based annual energy production uncertainty: are its components actually uncorrelated?

Calculations of annual energy production (AEP) from a wind power plant – whether based on preconstruction or operational data – are critical for wind plant financial transactions. The uncertainty in the AEP calculation is especially important in quantifying risk and is a key factor in determining financing terms. A popular industry practice is to assume that different uncertainty components within an AEP calculation are uncorrelated and can therefore be combined as the sum of their squares. We assess the practical validity of this assumption for operational-based uncertainty by performing operational AEP estimates for more than 470 wind plants in the United States, mostly in simple terrain. We apply a Monte Carlo approach to quantify uncertainty in five categories: revenue meter data, wind speed data, regression relationship between density-corrected wind speed (from reanalysis data) and measured wind power, length of long-term-correction data set, and future interannual variability. We identify correlations between categories by comparing the results across all 470 wind plants. We observe a positive correlation between interannual variability and the linearized long-term correction; a negative correlation between wind resource interannual variability and linear regression; and a positive correlation between reference wind speed uncertainty and linear regression. Then, we contrast total operational AEP uncertainty values calculated by omitting and considering correlations between the uncertainty components. We quantify that ignoring these correlations leads to an underestimation of total AEP uncertainty of, on average, 0.1% and as large as 0.5% for specific sites. Although these are not large increases, these would still impact wind plant financing rates; further, we expect these values to increase for wind plants in complex terrain. Based on these results, we conclude that correlations between the identified uncertainty components should be considered when computing the total AEP uncertainty.

17 WIND ENERGY↗

Test and Evaluation of Systems with Embedded Machine Learning Components

As Machine Learning (ML) continues to advance, it is being integrated into more systems. Often, the ML component represents a significant portion of the system that reduces the burden on the end user or significantly improves task performance. However, the ML component represents an unknown complex phenomenon that is learned from collected data without the need to be explicitly programmed. Despite the improvement in task performance, the models are often black boxes. Evaluating the credibility and the vulnerabilities of ML models poses a gap in current test and evaluation practice. For high consequence applications, the lack of testing and evaluation procedures represents a significant source of uncertainty and risk. To help reduce that risk, here we present considerations to evaluate systems embedded with an ML component within a red-teaming inspired methodology. We focus on (1) cyber vulnerabilities to an ML model, (2) evaluating performance gaps, and (3) adversarial ML vulnerabilities.

97 MATHEMATICS AND COMPUTING↗

Method of making conical fiber optical components

Improved method for producing fused-fiber optical components is described. These components have a frustro-conical shape and provide high-quality light transmission with high resolution capabilities. Fiber optical components can be used in precision optical systems, such as in certain camera applications.

Balkwill, J. T.↗

X-15 propulsion subsystem component development

The X-15 rocket-powered research aircraft was developed by the integrated effort of various areas such as aerodynamics, thermodynamics, and structures. The propulsion subsystem development at the onset of the program was handicapped for varied causes. As a result, early in the flight testing phase, many time-consuming and costly delays were encountered as a result of individual component failures. A review of the X-15 propulsion subsystem components is presented, with a discussion of some of the development problems, how they were alleviated, and how they may be reduced or avoided in future programs. In order to avoid these problems in the future, a program is recommended in the hope that it will increase component reliability commensurate with vehicle objectives.

Robert L. Wiswell↗

Radiation heating in selected NERVA engine components

The role of heating from nuclear radiation in design of the NERVA engine is treated. Some components are subjected to very high gamma heating rates in excess of 0.5 Btu/cubic inch/sec in steel in the primary nozzle or 0.25 Btu/cubic inch/sec in aluminum in the pressure vessel. These components must be cooled by a fraction of the liquid hydrogen propellant before it is passed through the core, heated, and expanded out the nozzle as a gas. Other components that are subjected to lower heating rates such as the thrust structure and the disk shield are designed so that they would not require liquid hydrogen cooling. Typical gamma and neutron heating rates, resulting temperatures, and their design consequences are discussed. Calculational techniques used in the nuclear and thermal analyses of the NERVA engine are briefly treated.

Courtney, J. C.↗

Radiation hardening of components and systems for nuclear rocket vehicle applications

The results of the analysis of the S-2 and S-4B components, although incomplete, indicate that many Saturn 5 components and subsystems, e.g., pumps, valves, etc., can be radiation hardened to meet NRV requirements by material substitution and minor design modifications. Results of these analyses include (1) recommended radiation tolerance limits for over 100 material applications; (2) design data which describes the components of each system; (3) presentation of radiation hardening examples of systems; and (4) designing radiation effects tests to supply data for selecting materials.

Greenhow, W. A.↗

Component duration and relative response rates in multiple schedules.

Pigeons were trained on a multiple variable-interval 30-sec, variable interval 90-sec schedule with each component presented alternately for an equal duration. This duration of exposure was varied from 5 to 300 sec. The rate of response in the variable-interval 30-sec component relative to the rate of response in the variable-interval 90-sec component was studied. Results are plotted and discussed.

Todorov, J. C.↗

Boron-aluminum structural component for Shuttle.

A boron-aluminum structural component, representative of Space Shuttle fuselage structure, has been fabricated and tested as part of a program to demonstrate boron-aluminum feasibility for Shuttle applications. The 4- by 5-foot component consists of eleven 24-ply Z section stringers and a +45 degree 8-ply skin. It was tested at room temperature and at 500 F under combined compressive and shear loadings. The components for this program were fabricated in order to encounter and solve scale-up problems, and to obtain test data representative of production hardware. The data from this program are expected to allow more accurate prediction of weights and costs of boron-aluminum structures for the Space Shuttle.

Brown, E. P.↗

High power microwave components for space communications satellite

Analyzed, developed, and tested were high power microwave components for communications satellites systems. Included were waveguide and flange configurations with venting, a harmonic filter, forward and reverse power monitors, electrical fault sensors, and a diplexer for two channel simultaneous transmission. The assembly of 8.36 GHz components was bench tested, and then operated for 60 hours at 3.5 kW CW in a high vacuum. The diplexer was omitted from this test pending a modification of its end irises. An RF leakage test showed only that care is required at flange junctions; all other components were RF tight. Designs were extrapolated for 12 GHz and 2.64 GHz high power satellite systems.

Jankowski, H.↗

Electron-Proton Spectrometer (EPS) component derating summary

The derating factors are defined, and all components used in the electron-proton spectrometer to determine effective system performance are analyzed. Basic information is presented for defining the rating of electrical and electronic components. The derating percentages and application rates assist in obtaining reliable operation of component parts used in manned space mission requirements.

Gleeson, P.↗

Contamination damage avoidance concepts for propulsion feed system components.

The potential gain in the reliability of reusable long-term mission vehicles through the minimization of component damage due to the ingestion of particulate contamination by feed system components has been recognized by the NASA-LeRC and MDAC, and a program to investigate these problems has been completed. This investigation covered the determination of the cycle life of a typical 2-in. poppet type of shutoff valve in an uncontaminated GH2 environment and then compared this component performance with simulated operation with GN2 and LN2 containing controlled amounts of AL2O2 contaminant particles. The original valve design was tested for contamination damage tolerance characteristics under full flow and cyclic operating conditions, redesigned to improve the damage tolerance to contaminants and then retested. A second method of approach to damage tolerance control was investigated through the evaluation of various types of particulate separation devices. The study included various types of dynamic separators but did not cover conventional filter assemblies.

Endicott, D. L.↗

Evaluation of beryllium for space shuttle components

Application of beryllium to specific full-scale space shuttle structural components and assemblies was studied. Material evaluations were conducted to check the mechanical properties of as-received material to gain design information on characteristics needed for the material in the space shuttle environment, and to obtain data needed for evaluating component and panel tests. Four beryllium structural assemblies were analyzed and designed. Selected components of these assemblies, representing areas of critical loading or design/process uncertainty, were designed and tested, and two panel assemblies were fabricated. Trends in cost and weight factors were determined by progressive estimation at key points of preliminary design, final design, and fabrication to aid in a cost/weight evaluation of the use of beryllium.

Trapp, A. E.↗

Design for pressure regulating components

The design development for Pressure Regulating Components included a regulator component trade-off study with analog computer performance verification to arrive at a final optimized regulator configuration for the Space Storable Propulsion Module, under development for a Jupiter Orbiter mission. This application requires the pressure regulator to be capable of long-term fluorine exposure. In addition, individual but basically identical (for purposes of commonality) units are required for separate oxidizer and fuel pressurization. The need for dual units requires improvement in the regulation accuracy over present designs. An advanced regulator concept was prepared featuring redundant bellows, all metallic/ceramic construction, friction-free guidance of moving parts, gas damping, and the elimination of coil springs normally used for reference forces. The activities included testing of actual size seat/poppet components to determine actual discharge coefficients and flow forces. The resulting data was inserted into the computer model of the regulator. Computer simulation of the propulsion module performance over two mission profiles indicated satisfactory minimization of propellant residual requirements imposed by regulator performance uncertainties.

Wichmann, H.↗

Development of modified vibration test criteria for qualifying space vehicle components

Simplified methods are described to estimate the test criteria of primary structures at component attachment points subjected to broadband random acoustic excitations. The current method utilizes a constant smeared component mass attenuation factor across the frequency range of interest. The developed method indicates that the attenuation factor is based on a frequency dependent ratio of the mechanical impedances of both the component and primary structures. The procedures used to predict the structural responses are considered as the present state-of-the-art and provide satisfactory prediction results. Example problems are used to illustrate the application procedures of the two methods and to compare the significant difference. It was found that the lower test criteria obtained by the impedance ratio method is due to the results of considering the effects of component/primary structure interaction.

Chang, K. Y.↗

Two-component, self-aligning laser vector velocimeter

A newly developed laser Doppler velocimeter is described. The basic optical component of the instrument is a two-dimensional ultrasonic Bragg cell. It is shown that use of this Bragg cell simplifies the optics usually required for the more conventional velocimeters, allows measurement of two-vector components of velocity, requires no adjustment of alignment mirrors, and enables both velocity component signals to be detected with a single detector. Some results from experiments using this velocimeter in an atmospheric application are described.

Farmer, W. M.↗

Attitude Control Propulsion Components, Volume 1

Effort was made to include as much engineering information on each component as possible, consistent with usefulness and catalog size limitations. The contents of this catalog contain components which were qualified for use with spacecraft monopropellant hydrazine and inert gas attitude control systems. Thrust ranges up to 44.5 N (10.0 lbf) for hydrazine and inert gas sytems were considered. Additionally, some components qualified for uses other than spacecraft attitude control are included because they are suitable for use in attitude controls systems.

Source record↗

Experience with integrally-cast compressor and turbine components for a small, low-cost, expendable-type turbojet engine

Experiences with integrally-cast compressor and turbine components during fabrication and testing of four engine assemblies of a small (29 cm (11 1/2 in.) maximum diameter) experimental turbojet engine design for an expendable application are discussed. Various operations such as metal removal, welding, and re-shaping of these components were performed in preparation of full-scale engine tests. Engines with these components were operated for a total of 157 hours at engine speeds as high as 38,000 rpm and at turbine inlet temperatures as high as 1256 K (1800 F).

Dengler, R. P.↗