SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The SPATL is an analysis program in the Accuracy Assessment Software System which makes comparisons between ground truth information and dot labeling for an individual segment. In order to facilitate the aggregation cf this information, SPATL was modified to produce a disk output file containing the necessary information about each segment.
Modifications are described that were made to the analysis program MLTCRP in the accuracy assessment software system to produce a disk output file. The output files produced by this modified program are used to aggregate data for regions greater than a single segment.
The low-cycle fatigue lives of ZrO2-NiCrAlY and Al2O3-ZrO2-NiCrAlY thermal-barrier coatings in air at 982 C were determined from cyclic flexural tests of coated TAZ-8A strips. Strains were computed as a function of specimen displacements from a nonlinear, three-dimensional stress analysis program. Fatigue resistances of thermal-barrier coatings applied to the strips were compared with those of uncoated and NiCrAlY-coated strips. The results indicate that ZrO2 is about four times greater in fatigue life than TAZ-8A at 982 C, that ZrO2 would probably retain that fatigue strength up to 1316 C, and that adding an outer coat of Al2O3 to ZrO2 is neither beneficial nor detrimental to fatigue resistance.
Various government agencies have put forth effort to enable the prediction of what lightning current will do to aircraft avionic systems. Ongoing and future efforts of predicting avionic voltages and currents caused by electromagnetic fields external to the aircraft are illustrated. The Intrasystem Analysis Program (IAP) was put to use to predict lightning-induced voltages on avionic systems. Presently funded programs are investigating the modification nonmetallic composite materials will cause to the metallic IAP program predictions. The various factors involved in designing prediction techniques are discussed.
This article describes the comparison of a maximum likelihood convolutional decoder (MCD) prediction model and the actual performance of the MCD at the Madrid Deep Space Station. The MCD prediction model is used to develop a subroutine that has been utilized by the Telemetry Analysis Program (TAP) to compute the MCD bit error rate for a given signal-to-noise ratio. The results indicate that that the TAP can predict quite well compared to the experimental measurements. An optimal modulation index also can be found through TAP.
The work performed concentrated on including multisun effects, high temperature effects, and electron irradiation effects into the computer analysis program for heterojunction and graded bandgap solar cells. These objectives were accomplished and the program is now available for such calculations.
Spacecraft charging results are presented for the DSCS-3 satellite for a severe geomagnetic substorm. Spacecraft charging results were obtained by the use of the electrostatic charging analysis program (ESCAP). The ESCAP computer code which can determine both the transient or steady state differential charging potentials was an engineering design tool that utilized a circuit theory approach to spacecraft charging. Using the ESCAP code, the steady state (static) differential potentials of the outer spacecraft surfaces and metallic structure were obtained for the DSCS-3 satellite when under the influence of a severe geomagnetic substorm during the local midnight-to-dawn quadrant of its geosynchronous orbital path. The results indicated that, in the steady state, most of the DSCS-3 outer surface materials will not achieve differential potentials large enough to produce an electrostatic discharge.
A solar cell fabrication and analysis program was conducted to determine the effects on the resultant solar cell efficiency of impurities intentionally incorporated into silicon. The program employed flight quality technologies and quality assurance to assure that variations in cell performance were due to the impurities incorporated in the silicon. The initial verification runs have resulted in an average AM0 cell efficiency of 12.8% at 25 C.
A model for bipolar junction power switching transistors whose parameters can be readily obtained by the circuit design engineer, and which can be conveniently incorporated into standard computer-based circuit analysis programs is presented. This formulation results from measurements which may be made with standard laboratory equipment. Measurement procedures, as well as a comparison between actual and computed results, are presented.
A series of high hub tip radius ratio compressor stages representative of the middle and latter stages of axial flow compressors is discussed. The effects of aspect ratio, diffusion factor, and solidity on rotor and stage performance are determined. Fourteen middle stages are tested to study the effects on performance of varying both diffusion through the rotor and stator blades and blade aspect ratio. The design parameters in the streamline analysis program, the blade geometry program, and the blade coordinate program are presented.
A solar cell fabrication and analysis program to determine the effects on the resultant solar cell efficiency of impurities incorporated into silicon is conducted. Flight quality technologies and quality assurance are employed to assure that variations in cell performance are due to the impurities incorporated in the silicon. The type and level of impurity doping in each test lot is given and the mechanism responsible for the degradation of cell performance is identified and correlated to the doped impurities.
A research gas turbine combustor which allows for independent control of drop size, fuel/air ratio, air inlet temperature, pressure, reference velocity, and residence time has been used to study the influence of fuel spray characteristics on primary zone emissions. Local concentrations of oxides of nitrogen, carbon monoxide and unburned hydrocarbons at various locations in the flow, local gas temperature, gas velocity, and the turbulence intensity (measured with laser velocimetry) are obtained. A comprehensive data analysis program to compute the local fuel/air ratio and the sum of the mole fractions of the species present confirms the validity of the emissions data. Increasing drop size is correlated with an increase in unburned hydrocarbons, while increasing residence time is associated with sharp decreases in hydrocarbons and carbon monoxide and an increase in oxides of nitrogen.
The use of appropriate diagnostic tools for aircraft oil wetted components is reviewed, noting that it can reduce direct operating costs through reduced unscheduled maintenance, particularly in helicopter engine and transmission systems where bearing failures are a significant cost factor. Engine and transmission wear modes are described, and diagnostic methods for oil and wet particle analysis, the spectrometric oil analysis program, chip detectors, ferrography, in-line oil monitor and radioactive isotope tagging are discussed, noting that they are effective over a limited range of particle sizes but compliment each other if used in parallel. Fine filtration can potentially increase time between overhauls, but reduces the effectiveness of conventional oil monitoring techniques so that alternative diagnostic techniques must be used. It is concluded that the development of a diagnostic system should be parallel and integral with the development of a mechanical system.
Flaw growth under load is predicted in two dimensions with Advanced Crack Propagation Predictive Analysis Program (FLAGR04). FLAGR04 accommodates variety of cracks, crack transitions, stress gradients, changes in material properties, and Willenberg retardation. Program is written in FORTRAN IV for batch execution and is available for CDC and IBM machines.
NASTRAN, NASA's general-purpose finite-element structural analysis program, has been modified to allow recovery of surface strains, reference plane strains, and local curvatures at nodes of general plane elements. NASTRAN routines that operate on element stress/strain/temperature relationships and strain/temperature relationships have been modified to incorporate generation and return of strains and curvatures in lieu of stresses. Strains and curvatures are then transformed to material axes and interpolated to generate corresponding strains and curvatures at nodes of element. This interpolation is accomplished using special surface-mapping function.
All FORTRAN version of NASA structural analysis program NASATRAN is implemented on DEC VAX-series computer. Applications of NASATRAN extend to almost every type of linear structure and construction. Two special features are available in VAX version; program is executed from terminal in manner permitting use of VAX interactive debugger, and links are interactively restarted when desired by first making copy of all NASATRAN work files.
A solar cell fabrication and analysis program was conducted to determine the effects on the resultant solar cell efficiency of impurities intentionally incorporated into silicon. It was found that certain impurities such as titanium, tantalum, and vanadium were bad, even in very small concentrations. Cell performance appeared relatively tolerable to impurities such as copper, carbon, calcium, chromium, iron and nickel (in the concentration levels which were considered).
A test and analysis program performed on four complete propulsion systems for an urban electric vehicle (EV) is described and results given. A dc series motor and a permanent magnet (PM) motor were tested, each powered by an EV battery pack and controlled by (1) a series/parallel voltage-switching (V-switch) system; and (2) a system using a pulse width modulation, 400 Hz transistorized chopper. Dynamometer tests were first performed, followed by eV performance predictions and data correlating road tests. During dynamometer tests using chopper control; current, voltage, and power were measured on both the battery and motor sides of the chopper, using three types of instrumentation. Conventional dc instruments provided adequate accuracy for eV power and energy measurements, when used on the battery side of the controller. When using the chopper controller, the addition of a small choke inductor improved system efficiency in the lower duty cycle range (some 8% increase at 50% duty cycle) with both types of motors. Overall system efficiency rankings during road tests were: (1) series motor with V-switch; (2) PM motor with V-switch; (3) series motor with chopper; and (4) PM motor with chopper. Chopper control of the eV was smoother and required less driver skill than V-switch control.