Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Work function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Man-vehicle systems research facility advanced aircraft flight simulator throttle mechanism

The Advanced Aircraft Flight Simulator is equipped with a motorized mechanism that simulates a two engine throttle control system that can be operated via a computer driven performance management system or manually by the pilots. The throttle control system incorporates features to simulate normal engine operations and thrust reverse and vary the force feel to meet a variety of research needs. While additional testing to integrate the work required is principally now in software design, since the mechanical aspects function correctly. The mechanism is an important part of the flight control system and provides the capability to conduct human factors research of flight crews with advanced aircraft systems under various flight conditions such as go arounds, coupled instrument flight rule approaches, normal and ground operations and emergencies that would or would not normally be experienced in actual flight.

Kurasaki, S. S.↗

Electrochemical concentration cell ozonesonde accuracy and precision

This paper is concerned with the results of a study designed to evaluate experimentally the accuracy and precision of electrochemical concentration cell (ECC) ozonesondes as prepared and flown by NASA, as a function of altitude. A combination of dual-instrument soundings and laboratory work using an environmental chamber was employed in the study. The ECC ozonesonde is a small, balloon-borne sensor developed for obtaining vertical profiles of atmospheric ozone. Attention is given to the design of the employed environmental chamber, ozone and temperature profiles used in simulated ozonesonde soundings, absolute and relative ECC ozonesonde precision estimates determined with the environmental chamber and from dual-instrument balloon soundings, and the ECC ozonesonde accuracy.

Barnes, R. A.↗

Redistribution of radiation in the presence of velocity-changing collisions

Starting with the recent work of Cooper et al., a suitable form of the normalized redistribution function relevant for a treatment of redistribution in the presence of velocity-changing collisions is presented. Attention is devoted to provide practical estimates of the ratio between the usual line-broadening parameters and the velocity-changing rate. It is shown that for virtually all cases of astrophysical interest the effect of velocity-changing collisions is quite negligible.

Hubeny, I.↗

Optimal placement of tuning masses for vibration reduction in helicopter rotor blades

Described are methods for reducing vibration in helicopter rotor blades by determining optimum sizes and locations of tuning masses through formal mathematical optimization techniques. An optimization procedure is developed which employs the tuning masses and corresponding locations as design variables which are systematically changed to achieve low values of shear without a large mass penalty. The finite-element structural analysis of the blade and the optimization formulation require development of discretized expressions for two performance parameters: modal shaping parameter and modal shear amplitude. Matrix expressions for both quantities and their sensitivity derivatives are developed. Three optimization strategies are developed and tested. The first is based on minimizing the modal shaping parameter which indirectly reduces the modal shear amplitudes corresponding to each harmonic of airload. The second strategy reduces these amplitudes directly, and the third strategy reduces the shear as a function of time during a revolution of the blade. The first strategy works well for reducing the shear for one mode responding to a single harmonic of the airload, but has been found in some cases to be ineffective for more than one mode. The second and third strategies give similar results and show excellent reduction of the shear with a low mass penalty.

Pritchard, Jocelyn I.↗

High resolution video monitoring of coating thickness during plasma spraying

A new approach to monitoring the thickness of plasma sprayed coatings during application is described. The method employs a high resolution video camera and width analyzer to accurately measure the dimensions of samples having simple geometries. This approach is best suited for cylindrical or flat substrates but it may also work for selected locations on more complex geometries. Measurement accuracy is a function of specimen dimensions and extent of magnification. Tolerances of plus or minus 0.5 mil (0.13 mm) on final coating thickness can be achieved. Additionally, the plot of cumulative coating thickess versus the number of passes has proven to be a useful diagnostic tool. While the ideal plot is linear, strong deviations from linearity - indicating the need for corrective action - may be observed.

Miller, Robert A.↗

Fault tolerant hypercube computer system architecture

A fault-tolerant multiprocessor computer system of the hypercube type comprising a hierarchy of computers of like kind which can be functionally substituted for one another as necessary is disclosed. Communication between the working nodes is via one communications network while communications between the working nodes and watch dog nodes and load balancing nodes higher in the structure is via another communications network separate from the first. A typical branch of the hierarchy reporting to a master node or host computer comprises, a plurality of first computing nodes; a first network of message conducting paths for interconnecting the first computing nodes as a hypercube. The first network provides a path for message transfer between the first computing nodes; a first watch dog node; and a second network of message connecting paths for connecting the first computing nodes to the first watch dog node independent from the first network, the second network provides an independent path for test message and reconfiguration affecting transfers between the first computing nodes and the first switch watch dog node. There is additionally, a plurality of second computing nodes; a third network of message conducting paths for interconnecting the second computing nodes as a hypercube. The third network provides a path for message transfer between the second computing nodes; a fourth network of message conducting paths for connecting the second computing nodes to the first watch dog node independent from the third network. The fourth network provides an independent path for test message and reconfiguration affecting transfers between the second computing nodes and the first watch dog node; and a first multiplexer disposed between the first watch dog node and the second and fourth networks for allowing the first watch dog node to selectively communicate with individual ones of the computing nodes through the second and fourth networks; as well as, a second watch dog node operably connected to the first multiplexer whereby the second watch dog node can selectively communicate with individual ones of the computing nodes through the second and fourth networks. The branch is completed by a first load balancing node; and a second multiplexer connected between the first load balancing node and the first and second watch dog nodes, allowing the first load balancing node to selectively communicate with the first and second watch dog nodes.

Madan, Herb S.↗

Modelling the transitional boundary layer

Recent developments in the modelling of the transition zone in the boundary layer are reviewed (the zone being defined as extending from the station where intermittency begins to depart from zero to that where it is nearly unity). The value of using a new non-dimensional spot formation rate parameter, and the importance of allowing for so-called subtransitions within the transition zone, are both stressed. Models do reasonably well in constant pressure 2-dimensional flows, but in the presence of strong pressure gradients further improvements are needed. The linear combination approach works surprisingly well in most cases, but would not be so successful in situations where a purely laminar boundary layer would separate but a transitional one would not. Intermittency-weighted eddy viscosity methods do not predict peak surface parameters well without the introduction of an overshooting transition function whose connection with the spot theory of transition is obscure. Suggestions are made for further work that now appears necessary for developing improved models of the transition zone.

Narasimha, R.↗

Macular bioaccelerometers on earth and in space

Spaceflight offers the unique opportunity to study linear bioaccelerometers (vestibular maculas) in the virtual absence of a primary stimulus, gravitational acceleration. Combined morphological-physiological studies of maculas fixed in space and following flight should reveal macular adaptive responses to microgravity, and their time-course. Ground-based research, already begun, using computer-assisted, three-dimensional reconstructions of macular terminal fields will lead to development of computer models of functioning maculas. This research should continue in conjunction with physiological studies, including work with multichannel electrodes.

Ross, M. D.↗

Predicting Formation Of Sigma Phase In Alloys

SUPER PHACOMP developed after research into many versions of PHACOMP algorithm. Resulting program implements three of these versions, enabling comparison of results to give greater reliability to predictions. Inasmuch as certain calculations common to each, three versions woven together for efficiency. While prediction of formation of sigma phase is primary function, also performs other calculations of properties of alloys. Program benefits anyone working in design of alloys. Written in BASIC.

Kaukler, William F.↗

Low Temperature Characterization of Ceramic and Film Power Capacitors

Among the key requirements for advanced electronic systems is the ability to withstand harsh environments while maintaining reliable and efficient operation. Exposures to low temperature as well as high temperature constitute such stresses. Applications where low temperatures are encountered include deep space missions, medical imaging equipment, and cryogenic instrumentation. Efforts were taken to design and develop power capacitors capable of wide temperature operation. In this work, ceramic and film power capacitors were developed and characterized as a function of temperature from 20 C to -185 C in terms of their dielectric properties. These properties included capacitance stability and dielectric loss in the frequency range of 50 Hz to 100 kHz. DC leakage current measurements were also performed on the capacitors. The manuscript presents the results that indicate good operational characteristic behavior and stability of the components tested at low temperatures.

Hammoud, Ahmad↗

Nonlinear Comparison of High-Order and Optimized Finite-Difference Schemes

The effect of reducing the formal order of accuracy of a finite-difference scheme in order to optimize its high-frequency performance is investigated using the I-D nonlinear unsteady inviscid Burgers'equation. It is found that the benefits of optimization do carry over into nonlinear applications. Both explicit and compact schemes are compared to Tam and Webb's explicit 7-point Dispersion Relation Preserving scheme as well as a Spectral-like compact scheme derived following Lele's work. Results are given for the absolute and L2 errors as a function of time.

Hixon, R.↗

Evolution of Structure in the Intergalactic Medium and the Nature of the LY-Alpha Forest

We have performed a detailed statistical study of the evolution of structure in a photoionized intergalactic medium (IGM) using analytical simulations to extend the calculation into the mildly nonlinear density regime found to prevail at z = 3. Our work is based on a simple fundamental conjecture: that the probability distribution function of the density of baryonic diffuse matter in the universe is described by a lognormal (LN) random field. The LN distribution has several attractive features and follows plausibly from the assumption of initial linear Gaussian density and velocity fluctuations at arbitrarily early times. Starting with a suitably normalized power spectrum of primordial fluctuations in a universe dominated by cold dark matter (CDM), we compute the behavior of the baryonic matter, which moves slowly toward minima in the dark matter potential on scales larger than the Jeans length. We have computed two models that succeed in matching observations. One is a nonstandard CDM model with OMEGA = 1, h = 0.5, and GAMMA = 0.3, and the other is a low-density flat model with a cosmological constant (LCDM), with OMEGA = 0.4, OMEGA(sub LAMBDA) = 0.6, and h = 0.65. In both models, the variance of the density distribution function grows with time, reaching unity at about z = 4, where the simulation yields spectra that closely resemble the Ly-alpha forest absorption seen in the spectra of high-z quasars. The calculations also successfully predict the observed properties of the Ly-alpha forest clouds and their evolution from z = 4 down to at least z = 2, assuming a constant intensity for the metagalactic UV background over this redshift range. However, in our model the forest is not due to discrete clouds, but rather to fluctuations in a continuous intergalactic medium. At z = 3; typical clouds with measured neutral hydrogen column densities N(sub H I) = 10(exp 13.3), 10(exp 13.5), and 10(exp 11.5) /sq cm correspond to fluctuations with mean total densities approximately 10, 1, and 0.1 times the universal mean baryon density. Perhaps surprisingly, fluctuations whose amplitudes are less than or equal to the mean density still appear as "clouds" because in our model more than 70% of the volume of the IGM at z = 3 is filled with gas at densities below the mean value.

Bi, Hongguang↗

Large Aperture Multiplexed Diffractive Lidar Optics

We have delivered only 2 or 3 UV Holographic Optical Elements (HOEs) thus far and have fallen short of the intended goal in size and in dual wavelength function. Looking back, it has been fortuitous that we even made anything work in the UV region. It was our good fortune to discover that the material we work with daily was adequate for use at 355 nm, if well rinsed during processing. If we had stuck to our original plan of etching in small pieces of fused silica, we would still be trying to make the first small section in our ion mill, which is not yet operational. The original plan was far too ambitious and would take another 2 years to complete beginning where we left off this time. In order to make a HOE for the IR as well as the UV we will likely have to learn to sensitize some film to the 1064 line and we have obtained sensitizer that is reported to work in that region already. That work would also take an additional year to complete.

Rallison, Richard D.↗

Formation of Brown Dwarfs LTSA 2001

The goals of the work funded by this grant are: (1) The measurement of the mass function and minimum mass of free-floating brown dwarfs down to the mass of Jupiter; (2) The measurement of the frequency of wide brown dwarf and planetary companions down to the mass of Jupiter as function of primary mass (0.02-2 Msun), age (1-10 Myr), and environment (clusters vs. dispersed regions). For the first objective, we have completed the design of guaranteed SIRTF observations of nearby star-forming regions and now await the launch of the mission in April 2003. In support of these upcoming observations, in the fall of 2002 we obtained optical spectroscopy at the MMT and the 1.5-meter telescope at Fred Lawrence Whipple Observatory for candidate young low-mass stars and brown dwarfs in the IC348 and Taurus star-forming regions. Two papers that include these data in new measurements of the mass functions in these regions are near completion and will be submitted for publication to the Astrophysical Journal in January. We have also proposed deep optical and near-IR imaging of the SIRTF fields in the IC348, Chamaeleon, and Ophiuchus star-forming regions with the MMT, Magellan, and Gemini North telescopes in early 2003. For the second objective, we have used deep HST WFPC2 images to search for young giant planets and brown dwarfs around approximately 100 low-mass stars and brown dwarfs in the nearby cluster IC 348. We have completed all data reduction and have checked these data for candidate companions. We are in the process of writing a paper that describes these candidate companions and presents the companion detection limits that were achieved with HST. We will attempt followup spectroscopy of the most promising candidate companions to confirm their nature as cool companions rather than background field stars during the commissioning of the facility adaptive optics system for the Gemini North telescope early in 2003. In addition, in SIRTF guaranteed time observations we plan to search for wide substellar companions (greater than 10 inches) around the youngest nearby field stars (ages of 30-100 Myr, d less than 30 pc). We have proposed to use Keck adaptive optics imaging to search these same stars for close-in planets and brown dwarfs at 0.1-l0 inches, which will perfectly complement our SIRTF observations.

Luhman, Kevin L.↗

Experimental Verification of Electric Drive Technologies Based on Artificial Intelligence Tools

A laboratory implementation of a fuzzy logic-tracking controller using a low cost Motorola MC68HC11E9 microprocessor is described in this report. The objective is to design the most optimal yet practical controller that can be implemented and marketed, and which gives respectable performance, even when the system loads, inertia and parameters are varying. A distinguishing feature of this work is the by-product goal of developing a marketable, simple, functional and low cost controller. Additionally, real-time nonlinearities are not ignored, and a mathematical model is not required. A number of components have been designed, built and tested individually, and in various combinations of hardware and software segments. These components have been integrated with a brushless motor to constitute the drive system. A microprocessor-based FLC is incorporated to provide robust speed and position control. Design objectives that are difficult to express mathematically can be easily incorporated in a fuzzy logic-based controller by linguistic information (in the form of fuzzy IF-THEN rules). The theory and design are tested in the laboratory using a hardware setup. Several test cases have been conducted to confirm the effectiveness of the proposed controller. The results indicate excellent tracking performance for both speed and position trajectories. For the purpose of comparison, a bang-bang controller has been tested. The fuzzy logic controller performs significantly better than the traditional bang-bang controller. The bang-bang controller has been shown to be relatively inaccurate and lacking in robustness. Description of the implementation hardware system is also given.

Rubaai, Ahmed↗

Formation of Brown Dwarfs LTSA 2001

The goals of the work funded by this grant are: 1) The measurement of the mass function and minimum mass of free-floating brown dwarfs down to the mass of Jupiter; 2) The measurement of the frequency of wide brown dwarf and planetary companions down to the mass of Jupiter as function of primary mass (0.02-2 Msun), age (1-10 Myr), and environment (clusters vs. dispersed regions). For the first objective, we have completed the design of guaranteed SIRTF observations of nearby star-forming regions. With the successful launch of the SIRTF mission in August of 2003, we now await the execution of these observations, which should begin in early 2004. In support of these upcoming observations, in the fall of 2002 and spring of 2003 we obtained optical spectroscopy at the MMT, the 1.5 meter telescope at Fred Lawrence Whipple Observatory, and Magellan Observatory for several hundred candidate young low-mass stars and brown dwarfs in the IC348, Taurus, and Chamaeleon star-forming regions. All of these data have been published in three papers in The Astrophysical Journal. We also recently used the MMT to obtain deep near-IR images of IC348 to accompany the SIRTF images and have time in the next month at the IRTF and Keck for spectroscopy of candidate brown dwarfs in IC348 and Taurus. We have submitted proposals for deep optical and near-IR imaging of the SIRTF fields in Chamaeleon and Ophiuchus for spring 2004 with Magellan and the AAT. Results from this research have been presented in invited talks at UU Symposium 221 (July 2003) and at the SIRTF Galactic Science Workshop (August 2003). For the second objective, we have used deep HST WFPC2 images to search for young giant planets and brown dwarfs around approx. 100 low-mass stars and brown dwarfs in the nearby cluster IC348. We have completed all data reduction and have checked these data for candidate companions. We expect to submit the paper describing these observations to The Astrophysical Journal by the end of the year. In addition, in SIRTF guaranteed time observations we plan to search for wide substellar companions (>10 sec) around the youngest nearby field stars (ages of 30-100 Myr, d<30 pc). We have submitted a proposal to use Keck adaptive optics imaging to search these same stars for close-in planets and brown dwarfs at 0.1-10 sec, which will perfectly complement our SIRTF observations.

Luhman, Kevin L.↗

Applying Reflective Middleware Techniques to Optimize a QoS-enabled CORBA Component Model Implementation

Although existing CORBA specifications, such as Real-time CORBA and CORBA Messaging, address many end-to-end quality-of-service (QoS) properties, they do not define strategies for configuring these properties into applications flexibly, transparently, and adaptively. Therefore, application developers must make these configuration decisions manually and explicitly, which is tedious, error-prone, and often sub-optimal. Although the recently adopted CORBA Component Model (CCM) does define a standard configuration frame-work for packaging and deploying software components, conventional CCM implementations focus on functionality rather than adaptive quality-of service, which makes them unsuitable for next-generation applications with demanding QoS requirements. This paper presents three contributions to the study of middleware for QoS-enabled component-based applications. It outlines reflective middleware techniques designed to adaptively: (1) select optimal communication mechanisms, (2) man- age QoS properties of CORBA components in their containers, and (3) (re)configure selected component executors dynamically. Based on our ongoing research on CORBA and the CCM, we believe the application of reflective techniques to component middleware will provide a dynamically adaptive and (re)configurable framework for COTS software that is well-suited for the QoS demands of next-generation applications.

Wang, Nanbor↗

Habitual routines in task-performing groups

Groups, like individuals, often develop habitual routines for dealing with frequently encountered stimuli. Although such routines are consequential for group life and work, little is known about them. This paper reconnoiters the territory of habitual behavior in groups that perform work within organizations. We offer a definition of group habits, identify their functions and dysfunctions, suggest how they develop and are maintained, and identify the circumstances when they are likely to be altered or abandoned. Throughout, we give special attention to the social nature of habitual routines in groups, to the interaction between habitual behavior and group life cycle phenomena, and to the role of the organizational context in prompting, shaping, and terminating habitual routines.

NASA Program Space Human Factors↗