Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Weak form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

I Zw 18, a Template for Star-Forming, z is Greater than 7 Galaxies

I Zw 18-NW, one of the most primitive nearby dwarf galaxies, is arguably the best template we have for star-forming, very high-redshift galaxies (z>7). We have therefore obtained a far-UV spectrum of I Zw 18-NW using Hubble's Cosmic Origins Spectrograph (COS). The spectrum indicates star-formation over the past approx.10 Myr, a very low stellar metallicity, log Z/Zsun approx. -1.7, and high average stellar rotation rate, Vsini approx.200 km/s. Stellar wind lines are very weak, and the edge velocity of wind lines is very low (approx.250 km/s). The overall properties of I Zw 18-NW are consistent with theories of very low metallicity, rapidly rotating stars, e.g. Meynet et al. (2006).

Heap, Sara R.↗
NASA NTRS1998

Reanalysis of Clementine Bistatic Radar Data from the Lunar South Pole

On 9 April 1994 the Clementine spacecraft high-gain antenna was aimed toward the Moon's surface and the resulting 13-cm wavelength radio echoes were received on Earth. Using these data, we have found that the lunar surface generally follows a Lambertian bistatic scattering function sigma(sub 0) = K(sub D)cos(theta(sub i) with K(sub D) approx. 0.003 for the opposite (expected) sense of circular polarization and K(sub D) approx. 0.001 for the same (unexpected) sense. But there are important deviations-of up to 50% in some parts of the echo spectrum-from this simple form. Based on an earlier analysis of these same data, Nozette et al. claimed detection of an enhancement in echoes with right circular polarization from regions near the South Pole in a near-backscatter geometry. Such behavior would be consistent with presence of perhaps large quantities of water ice near the Pole. We have been unable to reproduce that result. Although we find weak suggestions of enhanced echoes at the time of South Pole backscatter, similar features are present at earlier and later times, adjacent frequencies, and in left circular polarization. If enhanced backscatter is present, it is not unique to the South Pole; if not unique to the Pole, then ice is less likely as an explanation for the enhancement.

Simpson, Richard A.↗
NASA NTRS2001

Magnetized Target Fusion Driven by Plasma Liners

For practical applications of magnetized target fusion, standoff drivers to deliver the imploding momentum flux to the target plasma remotely are required. Quasi-spherically converging plasma jets have been proposed as standoff drivers for this purpose. The concept involves the dynamic formation of a quasi-spherical plasma liner by the merging of plasma jets, and the use of the liner so formed to compress a spheromak or a field reversed configuration (FRC). Theoretical analysis and computer modeling of the concept are presented. It is shown that, with the appropriate choice of the flow parameters in the liner and the target, the impact between the liner and the target plasma can be made to be shockless in the liner or to generate at most a very weak shock in the liner. Additional information is contained in the original extended abstract.

Thio, Y. C. Francis↗
NASA NTRSDate not supplied

An Evaluation of Extended Reality Technologies for Use in Verification Testing at NASA 2024 HRP IWS Abstract

BACKGROUND At NASA, verification testing is the formal process of ensuring that a product conforms to requirements set by a project or program. Some verification methods, such as Demonstrations and Test, require either the end product or a mockup of the product with sufficient fidelity to stand-in for the product during the test. Traditionally, these mockups have been physical (e.g., foam-core and wood) but there is growing interest in exploring new methods for testing with these mockups. These methods include virtual reality (VR), mixed reality, and augmented reality which are collectively referred to as eXtended Reality (XR) technologies. VR has already been adopted and used by many in the aerospace industry as a tool for use in early design phases (e.g., developmental testing) and may have the most potential for use in verification tests. Benefits of using VR mockups offer cost effectiveness, ease of iteration, simulation of hazardous conditions (e.g., an egress through a hatch with smoke obscuring vision), and the ability to simulate microgravity conditions, which are challenging to do with physical mockups. However, the validity of test results obtained from VR mockup demonstrations or testing, compared to the current gold standard of physical mockups, remains uncertain. It is unlikely that there is one clean answer as there are many different types of verification outcomes and each XR technology must be evaluated on its own merits. This is not an issue during developmental testing as the design is still in flux and the total success of the design is not dependent upon the results of a developmental test. Verification tests, however, only happen once, assuming no change to the design, and the results are used to certify the product. Therefore, establishing the validity of XR mockup-based verification outcomes is essential before considering them for any use in verification tests. OBJECTIVE AND METHOD To address this concern, the Human Research Program has funded a project to explore and qualify how XR technologies might be used in verification demonstration and testing at NASA. Currently, we are conducting a review of the literature on the utilization of XR mockups for design activities, prototyping, and user testing. We are employing the Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis method to identify the pros, cons, and barriers to adoption of XR technologies for verification testing at NASA. Additionally, we are developing a framework to guide the deployment of XR mockups for verification tests. Building upon available evidence from the literature and subject-matter expert feedback, our goal for the framework is to provide guidelines for which forms of XR mockups are suitable for a given verification test, when only physical mockups should be employed and to highlight areas for which more evidence is needed. To further refine our framework and to contribute to the body of evidence, we are planning a lab-based experiment comparing a VR mockup to a physical twin for a set of select verification outcomes. ANTICIPATED RESULTS In this presentation, we will present the work we conducted to evaluate XR technologies for use in verification tests at NASA. We will summarize and report our findings from the SWOT analysis and our lab-based study, and we will present the current state of the XR Technologies for Verification Testing framework. We will conclude by summarizing remaining work and future directions for the project. Technologies for Verification Testing framework. We will conclude by summarizing remaining work and future directions for the project.

Extended Reality↗
DOE OSTI2022

Crossover between strongly coupled and weakly coupled exciton superfluids

Following a crossover Superfluidity in fermionic systems occurs through the pairing of fermions into bosons, which can undergo condensation. Depending on the strength of the interactions between fermions, the pairs range from large and overlapping to tightly bound. The crossover between these two limits has been explored in ultracold Fermi gases. Liu et al . observed the crossover in an electronic system consisting of two layers of graphene separated by an insulating barrier and placed in a magnetic field. In this two-dimensional system, the pairs were excitons formed from an electron in one layer and a hole in the other. The researchers used magnetic field and layer separation to tune the interactions and detected the signatures of superfluidity through transport measurements. —JS

Science & Technology - Other Topics↗
DOE OSTI2021

A new cyclic carbonate enables high power/ low temperature lithium-ion batteries

The modern lithium-ion battery (LIB) configuration was enabled by the "magic chemistry" between ethylene carbonate (EC) and graphitic carbon anode. Despite the constant changes of cathode chemistries with improved energy densities, EC-graphite combination remained static during the last three decades. While the interphase generated by EC protects the fragile graphitic structure, the intrinsic disadvantages of EC (high viscosity, high melting point, excessive interphase growth) lead to mediocre power density and poor performances of LIB at sub-zero temperatures, where lithium depositions form upon charging. Such performance compromises arise from the fundamental dilemma between requiring effective interphase protection and high impedance from excessive growth of interphase. In this work, we designed and synthesized a "double EC" molecule as electrolyte additive to resolve the above dilemma. Erythritol bis(carbonate) (EBC) possesses lower LUMO energy level than EC and hence tends to decompose prior to EC reduction, but its weak solvation toward Li + restricts the extent of its reduction, thus minimizing the interphase thickness and the corresponding impedances. Electrolytes containing EBC enables both the charging and discharging of ampere-size LIB pouch cells at sub-zero temperatures from 0 to -20°C, demonstrating that the key approach to improve low temperature performances lies in how to tailor interphasial chemistry rather than the bulk electrolyte composition.

25 ENERGY STORAGE↗
DOE OSTI2022

Role of Eu-Doping in the Electron Transport Behavior in the Zintl Thermoelectric Ca 5-x-y Yb x Eu y Al 2 Sb 6 System

A series of Eu-doped Zintl compounds belonging to theCa 5-x-y Yb x Eu y Al 2 Sb 6 (x = 0, 1.12; 0 ≤ y ≤ 0.63(2)) system have been successfully synthesized by both the arc-melting and the molten Pb-flux methods. All of the five title compounds initially crystallized in the Ca 5 Ga 2 As 6 -type phase (space group Pbam, Z = 2, Pearson code oP26) and maintained their original structure even after the post-heat treatment, unlike the recently reported n-type Zintl analogues in the Ca 5-x-y Yb x RE y Al 2 Sb 6 (RE = Pr, Nd, Sm) systems, which underwent a phase transition from the Ca 5 Ga 2 As 6 -type to the Ca 5 Al 2 Bi 6 -type phase after annealing. This research aimed to understand the origin of the structural preference of the title Ca 5-x-y Yb x Eu y Al 2 Sb 6 system, whether it was affected by the valence electron count or the cationic size. Electrical transport property measurements showed an increase in electrical conductivities and a decrease of Seebeck coefficients for Ca 4.89(1) Eu 0.11 Al 2 Sb 6 , Ca 4.82(1) Eu 0.18 Al 2 Sb 6 , and Ca 4.62(1) Eu 0.38 Al 2 Sb 6 , compared to the parental compound Ca 5 Al 2 Sb 6 . Hole effect measurements proved that these changes should be attributed to the reduced carrier concentration and enhanced carrier mobility. The comprehensive density functional theory calculations including electron density map analysis for the hypothetical model Ca 4.5 Eu 0.5 Al 2 Sb 6 revealed that the polarity between Al and Sb forming the anionic frameworks decreased as the Eu-dopants were introduced, which eventually affected the carrier mobility in the anionic frameworks. Thermal conductivity measurements proved that the Eu-doping successfully lowered the lattice thermal conductivity because of the enhanced atomic disordering. In conclusion, the magnetization measurements for Ca 4.37(2) Eu 0.63 Al 2 Sb 6 showed a typical Curie–Weiss behavior with weak antiferromagnetic nearest-neighbor interactions with θ p = -5.07 K.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chemical Framework to Design Linear-like Relaxors toward Capacitive Energy Storage

ABO 3 -type perovskite relaxor ferroelectrics (RFEs) have emerged as the preferred option for dielectric capacitive energy storage. However, the compositional design of RFEs with high energy density and efficiency poses significant challenges owing to the vast compositional space and the absence of general rules. Here, we present an atomic-level chemical framework that captures inherent characteristics in terms of radius and ferroelectric activity of ions. By categorizing A/B-site ions as host framework, rattling, ferroelectrically active, and blocking ions and assembling these four types of ions with specific criteria, linear-like relaxors with weak locally correlated and highly extendable unit-cell polarization vectors can be constructed. As example, we demonstrate two new compositions of Bi 0.5 K 0.5 TiO 3- based and BaTiO 3- based relaxors, showing extremely high recoverable energy densities of 17.3 and 12.1 J cm –3 , respectively, both with a high efficiency of about 90%. Further, the role of different types of ions in forming heterogeneous polar structures is identified through element-specific local structure analysis using neutron total scattering combined with reverse Monte Carlo modeling. Further, our work not only opens up new avenues toward rational compositional design of high energy storage performance lead-free RFEs but also sheds light on atomic-level manipulation of functional properties in compositionally complex ferroelectrics.

25 ENERGY STORAGE↗
DOE OSTI2022

Discovery of charge density wave in a kagome lattice antiferromagnet

A hallmark of strongly correlated quantum materials is the rich phase diagram resulting from competing and intertwined phases with nearly degenerate ground state energies. A well-known example is the copper oxides, where a charge density wave (CDW) is ordered well above and strongly coupled to the magnetic order to form spin-charge separated stripes that compete with superconductivity. Recently, such rich phase diagrams have also been revealed in correlated topological materials. In two-dimensional kagome lattice metals consisting of corner-sharing triangles, the geometry of the lattice can produce flat bands with localized electrons, non-trivial topology, chiral magnetic order, superconductivity and CDW order. While CDW has been found in weakly electron correlated nonmagnetic AV 3 Sb 5 (A = K, Rb, Cs), it has not yet been observed in correlated magnetic ordered kagome lattice metals. Here we report the discovery of CDW within the antiferromagnetic (AFM) ordered phase of kagome lattice FeGe. The CDW in FeGe occurs at wavevectors identical to that of AV 3 Sb 5 , enhances the AFM ordered moment, and induces an emergent anomalous Hall effect. Furthermore, our findings suggest that CDW in FeGe arises from the combination of electron correlations-driven AFM order and van Hove singularities-driven instability possibly associated with a chiral flux phase, in stark contrast to strongly correlated copper oxides and nickelates, where the CDW precedes or accompanies the magnetic order.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Imaging transient molecular configurations in UV-excited diiodomethane

Femtosecond structural dynamics of diiodomethane (CH 2 I 2 ) triggered by ultraviolet (UV) photoabsorption at 290 and 330 nm are studied using time-resolved coincident Coulomb explosion imaging driven by a near-infrared probe pulse. Here, we map the dominant single-photon process, the cleavage of the carbon–iodine bond producing rotationally excited CH 2 I radical, identify the contributions of the three-body (CH 2 + I + I) dissociation and molecular iodine formation channels, which are primarily driven by the absorption of more than one UV photon, and demonstrate the existence of a weak reaction pathway involving the formation of short-lived transient species resembling iso-CH 2 I 2 -like geometries with a slightly shorter I–I separation compared to the ground-state CH 2 I 2 . These transient molecular configurations, which can be separated from the other channels by applying a set of conditions on the correlated momenta of three ionic fragments, are formed within ∼100 fs after the initial photoexcitation and decay within the next 100 fs.

Atomic and molecular processes↗
NASA NTRS1998

Re-Observing the First Hours of Supernova 1987A

This project was designed to use archival data from the International Ultraviolet Explorer (IUE) to measure the flux from the shock breakout from SN 1987A, emitted in the first few hours of the event, reflected from neighboring dust clouds in the form of a light echo. Such hot flux from the initial moments of a SN had never been observed before, and this offers a unique opportunity to measure it in reflection. Gilmozzi (1991, in "SN 1987A and Other Supernova") had reported such a detection of using IUE from observations made in 1988 and 1989. Our analysis of these data showed that this detection was very weak, and subject to changes comparable to the size of the signal according to various reasonable means of extracting the spectra. In fact, the features reported by Gilmozzi (1998 in "Ultraviolet Astrophysics Beyond IUE") are not found in a conventional NEWSIPS extraction or extended-source extraction of these data. The 1995 and 1996 IUE data collected for Crotts and Gilmozzi shows a more robust signal (about 20sigma,) from a cloud that echoes brighter in the optical than the 1988 feature. This shows a well-detected signal of about 5 x 10(exp -16) ergs per s/sq cm/Angstroms/arc sq sec at 1300 Angstroms, with a declining slope to redder wavelengths. This surface brightness, while detected with confidence in both large and small SVVT apertures, is still fainter than the reflected flux expected for most models of shock breakout. We have also taken the opportunity to recover the echo signal from exposures taken on Astro-1 and Astro-2 flights of the Ultraviolet Imaging Telescope (UIT) while pointed towards SN 1987A. These data yield a complementary result on the reflected flux, an upper limit of about 5 x 10(exp -17) ergs per s/sq cm/Angstroms/arc sq sec, spread over fainter optically echoing clouds, and over the same band where the signal was detected by IUE. While this appears in contradiction with the IUE result, it is made consistent by the corresponding strengths of the echoes in the optical.

Crotts, Arlin P. S.↗
NASA NTRS2003

Phytochromes A and B mediate red-light-induced positive phototropism in roots

The interaction of tropisms is important in determining the final growth form of the plant body. In roots, gravitropism is the predominant tropistic response, but phototropism also plays a role in the oriented growth of roots in flowering plants. In blue or white light, roots exhibit negative phototropism that is mediated by the phototropin family of photoreceptors. In contrast, red light induces a positive phototropism in Arabidopsis roots. Because this red-light-induced response is weak relative to both gravitropism and negative phototropism, we used a novel device to study phototropism without the complications of a counteracting gravitational stimulus. This device is based on a computer-controlled system using real-time image analysis of root growth and a feedback-regulated rotatable stage. Our data show that this system is useful to study root phototropism in response to red light, because in wild-type roots, the maximal curvature detected with this apparatus is 30 degrees to 40 degrees, compared with 5 degrees to 10 degrees without the feedback system. In positive root phototropism, sensing of red light occurs in the root itself and is not dependent on shoot-derived signals resulting from light perception. Phytochrome (Phy)A and phyB were severely impaired in red-light-induced phototropism, whereas the phyD and phyE mutants were normal in this response. Thus, PHYA and PHYB play a key role in mediating red-light-dependent positive phototropism in roots. Although phytochrome has been shown to mediate phototropism in some lower plant groups, this is one of the few reports indicating a phytochrome-dependent phototropism in flowering plants.

NASA Discipline Plant Biology↗
NASA NTRS2015

Thermodynamic Derivation of the Activation Energy for Ice Nucleation

Cirrus clouds play a key role in the radiative and hydrological balance of the upper troposphere. Their correct representation in atmospheric models requires an understanding of the microscopic processes leading to ice nucleation. A key parameter in the theoretical description of ice nucleation is the activation energy, which controls the flux of water molecules from the bulk of the liquid to the solid during the early stages of ice formation. In most studies it is estimated by direct association with the bulk properties of water, typically viscosity and self-diffusivity. As the environment in the ice-liquid interface may differ from that of the bulk, this approach may introduce bias in calculated nucleation rates. In this work a theoretical model is proposed to describe the transfer of water molecules across the ice-liquid interface. Within this framework the activation energy naturally emerges from the combination of the energy required to break hydrogen bonds in the liquid, i.e., the bulk diffusion process, and the work dissipated from the molecular rearrangement of water molecules within the ice-liquid interface. The new expression is introduced into a generalized form of classical nucleation theory. Even though no nucleation rate measurements are used to fit any of the parameters of the theory the predicted nucleation rate is in good agreement with experimental results, even at temperature as low as 190 K, where it tends to be underestimated by most models. It is shown that the activation energy has a strong dependency on temperature and a weak dependency on water activity. Such dependencies are masked by thermodynamic effects at temperatures typical of homogeneous freezing of cloud droplets; however, they may affect the formation of ice in haze aerosol particles. The new model provides an independent estimation of the activation energy and the homogeneous ice nucleation rate, and it may help to improve the interpretation of experimental results and the development of parameterizations for cloud formation.

Cirrus clouds↗
NASA NTRS1974

Ion-absorption band analysis for the discrimination of iron-rich zones

The author has identified the following significant results. A technique which combines digital computer processing and color composition was devised for detecting hydrothermally altered areas and for discriminating among many rock types in an area in south-central Nevada. Subtle spectral reflectance differences among the rock types are enhanced by ratioing and contrast-stretching MSS radiance values for form ratio images which subsequently are displayed in color-ratio composites. Landform analysis of Nevada shows that linear features compiled without respect to length results in approximately 25 percent coincidence with mapped faults. About 80 percent of the major lineaments coincides with mapped faults, and substantial extension of locally mapped faults is commonly indicated. Seven major lineament systems appear to be old zones of crustal weakness which have provided preferred conduits for rising magma through periodic reactivation.

Rowan, L. C.↗
NASA NTRS1983

Transport by weak electrostatic density drift fluctuations

Expressions are derived for transport by weak electrostatic microfluctuations driven unstable by a density gradient perpendicular to a uniform magnetic field in a Vlasov plasma. These expressions, which are evaluated for the universal and lower-hybrid density drift instabilities, provide improved physical interpretations for various wave-particle exchange frequencies previously reported. It is demonstrated that wave-particle effects generally reduce the free energy driving these instabilities, and that some forms of steady-state distribution functions are inappropriate for nonlinear theory.

Sanderson, J. J.↗
NASA NTRS1989

Young stars of low mass in the Gum nebula

Observations are presented for four recently formed stars in the vicinity of the Gum nebula which are heavily obscured by surrounding dust and are associated with small reflection nebulae. HH46 is the only currently active star of the sample, and it is found to have a spectral type in the range of late G-early K, with superimposed emission lines of H-alpha, Ca II, Fe I, Fe II, and weak He I at near zero velocities. It is suggested that the observed scenario of low-mass stars in an older massive star environment may be analogous to the circumstances surrounding the birth of the sun.

Graham, J. A.↗
DOE OSTI2026

Alleviating prior dependencies for DESI DR1 clustering fits through reparameterization

Bayesian analyses of the full-shape clustering of Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) exhibit prior-volume projection effects, whereby weakly constrained nuisance parameters of the Effective Field Theory of Large Scale Structure (EFTofLSS) shift marginalized cosmological posteriors away from the posterior maximum. We reanalyze DESI DR1 power spectrum multipoles using two complementary mitigation strategies: (i) nonlinear orthogonalization to decorrelate nuisance and cosmological parameter priors, and (ii) a fully reparameterization-invariant Jeffreys prior over all EFTofLSS coefficients, evaluated on-the-fly via closed-form Jacobians. Including data from DESI, Big-Bang Nuclesynthesis and a constraint on $n_{\mathrm{s}}$, baseline priors lead to multi-$σ$ projection in the Hubble parameter $H_{0}$ and dark energy equation of state parameters $w_{0}$ and $w_{a}$; the Jeffreys prior successfully recenters these posteriors to enclose the maximum a posteriori estimate within the 68% credible regions, demonstrating clear mitigation of projection effects for these late-time expansion parameters. A hybrid Jeffreys+baseline-Gaussian configuration controls residual over-broad tails in the physical cold dark matter density $ω_{\mathrm{c}}$ while preserving the volume correction, and is our favoured approach. We compare the credible intervals derived using our methodology to those obtained using Halo Occupation Distribution (HOD)-informed priors and to confidence intervals derived using frequentist profile likelihood analyses, finding agreement in both central values and degeneracy directions in the $w_{0}$--$w_{a}$ plane. This demonstrates that, once projection effects are properly controlled, we can make robust inferences about the late-time cosmological expansion independent of the statistical framework adopted.

Bonici, M. [Waterloo U.; Perimeter Inst. Theor. Ph↗
DOE OSTI2022

A Heterogeneous Palladium Catalyst for the Polymerization of Olefins Prepared by Halide Abstraction Using Surface R 3 Si + Species

Abstract The silylium‐like surface species [ i Pr 3 Si][(R F O) 3 Al−OSi≡)] activates (N^N)Pd(CH 3 )Cl (N^N=Ar−N=CMeMeC=N−Ar, Ar=2,6‐bis(diphenylmethyl)‐4‐methylbenzene) by chloride ion abstraction to form [(N^N)Pd−CH 3 ][(R F O) 3 Al−OSi≡)] ( 1 ). A combination of FTIR, solid‐state NMR spectroscopy, and reactions with CO or vinyl chloride establish that 1 shows similar reactivity patterns as (N^N)Pd(CH 3 )Cl activated with Na[B(Ar F ) 4 ]. Multinuclear 13 C{ 27 Al} RESPDOR and 1 H{ 19 F} S‐REDOR experiments are consistent with a weakly coordinated ion‐pair between (N^N)Pd−CH 3 + and [(R F O) 3 Al−OSi≡)]. 1 catalyzes the polymerization of ethylene with similar activities as [(N^N)Pd−CH 3 ] + in solution and incorporates up to 0.4 % methyl acrylate in copolymerization reactions. 1 produces polymers with significantly higher molecular weight than the solution catalyst, and generates the highest molecular weight polymers currently reported in copolymerization reactions of ethylene and methylacrylate.

Gao, Jiaxin↗