Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “UNDERGROUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Exploratory Efforts to Constrain Geologic Material Properties from Remote Sensing Data: A Joint Study

Identification and characterization of underground events from surface or remote data requires a thorough understanding of the rock material properties. However, material properties usually come from borehole data, which is expensive and not always available. A potential alternative is to use topographic characteristics to approximate the strength, but this has never been done before quantitatively. Here we present the results from the first steps towards this goal. We have found that there are strong correlations between compressive and tensile strengths and slopes, but these correlations vary depending on data analysis details. Rugosity may be better correlated to strength than slope values. More comprehensive analyses are needed to fully understand the best method of predicting strength from topography for this area. We also found that misalignment of multiple GIS datasets can have a large influence on the ability to make interpretations. Lastly, these results will require further study in a variety of climatic conditions before being applicable to other sites.

42 ENGINEERING↗

Seismo-Acoustic Wave Simulation for the 2016 Kumamoto Earthquake

It is well known that underground explosions or earthquakes can generate infrasound in the atmosphere. Seismoacoustic coupling between the ground motions and atmosphere is a key mechanism for infrasound generation. Epicentral infrasound which is direct response to epicentral ground motions are extensively studied for event detection and discrimination. Diffracted infrasound generated from Rayleigh waves are often observed and reported. Recent studies suggested the surface topography is also important for infrasound generation, and mountains or topographic peaks can act as effective secondary infrasound sources. In this study, we perform full 3-D seismoacoustic simulations to understand a coupled seismic and acoustic wave generation by an earthquake and energy partitioning across the solid Earth-ocean-atmosphere system. By including the effects of realistic topography, bathymetry, and earthquake focal mechanism, we provide quantitative information about seismoacoustic wavefields and secondary infrasound sources across the solid-water, solid-air, and water-air interfaces. Acoustic wave transmission across water-air interface is also investigated by using synthetic waveforms. Our study suggests that shallow seas near the coastline or over elevated seafloors can transmit significant amount of energy from acoustic waves in water and can be effective secondary infrasound sources.

58 GEOSCIENCES↗

NETL Well Integrity Workshop: Identifying Well Integrity Research Needs for Subsurface Energy Infrastructure

Wells are a critical component of subsurface energy infrastructure. Ensuring the integrity of wells as engineered pathways for the safe extraction, injection, and storage of fluids in the subsurface is key to maximizing the effectiveness and resilience of that infrastructure. Addressing well integrity issues in a technically robust manner that promotes environmental sustainability and social equity is also an important focus of the United States (U.S.) Department of Energy’s (DOE) Office of Fossil Energy and Carbon Management. Industry best practices, regulatory standards, modern monitoring data acquisition and control systems, and decades of research and development have dramatically improved the performance and reliability of wells for hydrocarbon extraction and underground injection in the oil and gas industry. Yet, important innovation is required to improve and ensure well integrity performance in engineered geologic systems where operational environments (fluid composition, temperature, pressure, and/or stress conditions) and long functional life cycles of well systems present unique challenges. Additionally, work is needed to understand and manage the long-term integrity and risks associated with legacy wells—especially those located adjacent to and presenting hazards for new subsurface activity.

02 PETROLEUM↗

Interim Findings and Suggestions: Cyclic Steaming above Fracturing Pressure and the Associated Surface Expressions

In the wake of California’s new regulations for Underground Injection Control (enacted in April 2019) and several recent high-visibility surface expressions associated with high-pressure cyclic steaming in diatomite formations, a Moratorium on the issuance of permits for new wells using high pressure steam injection was announced on November 19, 2019. We, a panel consisting of technical experts and regulators from CalGEM and Lawrence Livermore National Laboratory, were commissioned by CalGEM to carry out the study as documented in this report, to: Determine if projects using cyclic steam injection above fracturing pressure (referred to as “cyclic steaming” hereafter) can be implemented safely, and Identify specific criteria for future permitting should the Moratorium be lifted.

02 PETROLEUM↗

Evaluation of Electrical Resistivity Tomography to Monitor the Transport of Past Releases Beneath Tank Farms

Underground storage tanks at the Hanford Site, in southeastern Washington State, hold radioactive waste generated from four decades of plutonium production. The 149 single-shell tanks and the 28 double-shell tanks have all exceeded their initial design life of approximately 25 years. At least 67 tanks are assumed to have leaked in the past, resulting in radioactive releases into the vadose zone. Gamma ray logging within dry monitoring wells is currently the primary method for tracking the migration of leaked tank waste through the vadose zone. While this approach provides an accurate assessment of radioactive contamination, that information is only provided near (within ~1m) the borehole, leaving most of the vadose zone unmonitored, particularly the important region directly beneath the tank. This report describes a numerical study that investigates the feasibility and performance of time-lapse 3D electrical resistivity tomography (ERT) for long-term monitoring of a hypothetical tank waste location and migration through the vadose zone. ERT is a method of remotely imaging the bulk electrical conductivity (EC) of the subsurface, which is significantly impacted by the presence of conductive solid and liquid tank waste. The release of liquid tank wastes increases subsurface fluid conductivity and saturation over time, creating a target to use time-lapse ERT for long-term monitoring. Although the presence of metallic infrastructure can cause ERT interference, recent advancements in ERT data processing enable the deleterious effects of buried metallic infrastructure (e.g. pipes, wellbore casings, tanks) to be removed to better determine the liquid tank waste migration over time. Three hypothetical realistic scenarios were simulated in the ERT evaluation. The first two scenarios assume the same leak amount and rate (i.e., between 1/1/1951 and 12/31/1951 at the rate of 347 m 3 per year) but different leaky tanks. Scenario 1 assumes leaks under tank B-102, which is located on the edge of the B-tank farm and surrounded by a few metallic infrastructure including cased pipes/wells/tanks. Scenario 2 assumes leaks under tank B-108, which is located near the center of the B-tank farm and surrounded by larger amount of metallic infrastructure than B-102. Scenario 3 assumes the same metallic infrastructure as B-102, with a more recent contaminant leak that was simulated to have occurred between 1/1/2018 and 12/31/2023 at a rate of 1.89 m 3 per year. The leak time in Scenarios 1 and 2 corresponds to a historical overfill event in 1951 and Scenario 3 corresponds to a recent found tank leak in 2019. In each scenario, a “true” bulk EC model vs. time reflecting contaminant migration was generated. ERT data was simulated from these “true” bulk EC models and a time-lapse ERT inversion produced “imaged” bulk EC vs. time. Three electrode configurations in two, four and eight boreholes surrounding the leak tank were used in the ERT simulations in each scenario. These borehole configurations were considered logistically feasible and cost-effective for monitoring. The hypothetical ERT boreholes are assumed to have non-metallic casing. By comparing the “imaged” bulk EC with the “true” bulk EC, it was demonstrated that the three configurations of wells used (two, four, and eight wells) were able to successfully monitor the migration of tank leaks through the vadose zone, with bulk EC resolution increasing with the number of down borehole ERT arrays for all scenarios. Therefore, the use of eight boreholes to perform ERT monitoring beneath the tanks provided the best spatiotemporal information.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Seismo-Acoustic Wave Simulation for Earthquake-Generated Infrasound

It is well known that underground explosions or earthquakes can generate infrasound in the atmosphere. Seismoacoustic coupling between the ground motions and atmosphere is a key mechanism for infrasound generation. Epicentral infrasound which is direct response to epicentral ground motions are extensively studied for event detection and discrimination. Diffracted infrasound generated from Rayleigh waves are often observed and reported. Recent studies suggested the surface topography is also important for infrasound generation, and mountains or topographic peaks can act as effective secondary infrasound sources. In this study, we perform full 3-D seismoacoustic simulations to understand a coupled seismic and acoustic wave generation by an earthquake and energy partitioning across the solid Earthocean-atmosphere system. By including the effects of realistic topography, bathymetry, and earthquake focal mechanism, we provide quantitative information about seismoacoustic wavefields and secondary infrasound sources across the solid-water, solid-air, and water-air interfaces. Acoustic wave transmission across water-air interface is also investigated by using synthetic waveforms. Our study suggests that shallow seas near the coastline or over elevated seafloors can transmit significant amount of energy from acoustic waves in water and can be effective secondary infrasound sources.

58 GEOSCIENCES↗

Strategic Petroleum Reserve Enhanced Monitoring Compendium - FY 2021

The Strategic Petroleum (SPR) is the world’s largest supply of crude oil. The reserve consists of fours sites in Louisiana and Texas. Each site stores crude in deep, underground salt caverns. It is the mission of the SPR’s Enhanced Monitoring Program to examine all available data to inform our understanding of each site. This report discusses the data, processes and results for each of the four sites.

02 PETROLEUM↗

Deciphering dark matter in the Milky Way (Final Technical Report)

The goal of this research grant was to test new methods to test theories of dark matter, whether by detecting the dark matter in the Milky Way in underground experiments, or by tracing the stars in the Milky Way and beyond. This is a final technical report summarizing the research publications over the grant period.

79 ASTRONOMY AND ASTROPHYSICS↗

DARHT : Enduring Lessons from a Technical Project in a National Laboratory Context [Slides]

The Dual-Axis Radiographic Hydrodynamic Test (DARHT) facility at Los Alamos National Laboratory (LANL) is the world’s first flash x-ray facility able to take multiple high-resolution radiographs of the interior features of fast-moving dense objects during a single experiment. DARHT’s radiography and complimentary diagnostics makes it an important diagnostic tool in support of the US Department of Energy’s (DOE)/National Nuclear Security Administration (NNSA)’s stewardship of the US nuclear deterrent. The project to construct DARHT ran from 1988 through 2003. Initial Operating Capability along a single axis began in 1999. A technical issue delayed Critical Decision 4 for the full dual-axis capability until 2008. DARHT was characterized by several directed changes resulting from an environmental impact study, changes to the global security context resulting from the end of underground nuclear testing, and rapid evolution of applicable technology. Conventional building and lab-space construction were part of the project, but the project was dominated by Special Facility Equipment that, together with the mission to support the nuclear weapons program, required the project to be completed by national laboratories. Although the project pre-dated implementation of DOE Order 413.3, several important lessons for national laboratory projects remain applicable today and will be discussed here, including projects appropriate for the national laboratory environment, scope stability, risk acceptance and mitigation, communication, and collaboration. Finally, considerations for DOE contractor project managers are offered based upon the DARHT experience.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Applying Waveform Correlation and Waveform Template Metadata to Aftershocks in the Middle East to Reduce Analyst Workload

Organizations that monitor for underground nuclear explosive tests are interested in techniques that automatically characterize recurring events such as aftershocks to reduce the human analyst effort required to produce high-quality event bulletins. Waveform correlation is a technique that is effective in finding similar waveforms from repeating seismic events. In this study, we apply waveform correlation in combination with template event metadata to two aftershock sequences in the Middle East to seek corroborating detections from multiple stations in the International Monitoring System of the Preparatory Commission for the Comprehensive Nuclear-Test-Ban Treaty Organization. We use waveform templates from stations that are within regional distance of aftershock sequences to detect subsequent events, then use template event metadata to discover what stations are likely to record corroborating arrival waveforms for recurring aftershock events at the same location, and develop additional waveform templates to seek corroborating detections. We evaluate the results with the goal of determining whether applying the method to aftershock events will improve the choice of waveform correlation detections that lead to bulletin-worthy events and reduction of analyst effort.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Applying Waveform Correlation and Waveform Template Metadata to Mining Blasts to Reduce Analyst Workload

Organizations that monitor for underground nuclear explosive tests are interested in techniques that automatically characterize mining blasts to reduce the human analyst effort required to produce high - quality event bulletins. Waveform correlation is effective in finding similar waveforms from repeating seismic events, including mining blasts. In this study we use waveform template event metadata to seek corroborating detections from multiple stations in the International Monitoring System of the Preparatory Commission for the Comprehensive Nuclear-Test-Ban Treaty Organization. We build upon events detected in a prior waveform correlation study of mining blasts in two geographic regions, Wyoming and Scandinavia. Using a set of expert analyst-reviewed waveform correlation events that were declared to be true positive detections, we explore criteria for choosing the waveform correlation detections that are most likely to lead to bulletin-worthy events and reduction of analyst effort.

47 OTHER INSTRUMENTATION↗

Collaborative Research Towards a tonne-scale bolometer-based neutrinoless double beta decay experiment (Final Report)

Cryogenic bolometers are an excellent technology for neutrinoless double beta decay searches owing to their very high energy resolution and potential for high radiopurity. The current most advanced large-scale experiment using these detectors is the Cryogenic Underground Observatory for Rare Events (CUORE). The largest source of background in CUORE is degraded alpha particles, emitted from shallow depths of the detector holders, which can deposit a thermal energy signature similar to neutrinoless double beta decay. To mitigate this background, the CUPID concept (CUORE Upgrade with Particle IDentification) proposes to use scintillating cryogenic detectors. Detecting both the scintillation light and the thermal signal allows discrimination between alpha particle events and beta/gamma events. We report on the design and execution of R&D tests to optimize the design of the single detector module, in particular the scintillation light collection efficiency at cryogenic temperatures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Relationship Between the Marginal Probability of Failure for a CPP Test and the Recommended Corrosion Control Requirements for Hanford Double Shell Waste Tanks

The Hanford Site in Washington State currently stores millions of gallons of radioactive waste in underground, carbon steel, double shell tanks (DSTs) that were constructed between 1968 and 1986. A chemistry control and monitoring program has been established mitigate corrosion in order to extend the service life for the DSTs. The current waste temperatures in the DSTs are at historical lows (i.e., typically less than 50 °C). The previous chemistry control requirements were determined for conditions at temperatures significantly higher. SRNL undertook a statistically based investigation of the role of nitrate and halide ion (i.e., chloride and fluoride) induced pitting corrosion. The objective was to develop a comprehensive waste chemistry envelope for the simultaneous minimization of the pitting and SCC risks caused by halide and nitrate ions at the lower temperature conditions. On the basis of these tests, new chemistry control requirements were proposed and have since been implemented for pitting corrosion control.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Viewgraphs for w20_seismicsources [Slides]

Hybrid Optimization Software Suite (HOSS) is based on finite-discrete element modeling to capture the complex physics of explosions. Calibration of near-source modeling for underground explosions in geophysical models is presented, showing the effects of the amplitude of radial and vertical seismic components.

36 MATERIALS SCIENCE↗

3D orthorhombic earth model effects on seismic source characterization

Most earth materials are anisotropic with regard to seismic wave-speeds, especially materials such as shales, or where oriented fractures are present. However, the base assumption for many numerical simulations is to treat earth materials as isotropic media. This is done for simplicity, the apparent weakness of anisotropy in the far field, and the lack of well-characterized anisotropic material properties for input into numerical simulations. One approach for addressing the higher complexity of actual geologic regions is to model the material as an orthorhombic medium. We have developed an explicit time-domain, finite-difference (FD) algorithm for simulating three-dimensional (3D) elastic wave propagation in a heterogeneous orthorhombic medium. The objective of this research is to investigate the errors and biases that result from modeling a non-isotropic medium as an isotropic medium. This is done by computing “observed data” by using synthetic, anisotropic simulations with the assumption of an orthorhombic, anisotropic earth model. Green’s functions for an assumed isotropic earth model are computed and then used an inversion designed to estimate moment tensors with the “observed” data. One specific area of interest is how shear waves, which are introduced in an anisotropic model even for an isotropic explosion, affect the characterization of seismic sources when isotropic earth assumptions are made. This work is done in support of the modeling component of the Source Physics Experiment (SPE), a series of underground chemical explosions at the Nevada National Security Site (NNSS).

58 GEOSCIENCES↗

Biological Carbon Sequestration for Climate and Soil Health

The United States recently launched the Net Zero World Initiative on decarbonization. As temperatures and sea levels rise, strong action is needed to mitigate high atmospheric CO 2 levels. In response to this need, a joint workshop between the US Department of Energy’s Oak Ridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) was convened to assess the challenges and opportunities within biological carbon (C) capture. The virtual workshop on Biological Carbon Sequestration for Climate and Soil Health focused on three aspects of biological C capture research: natural systems, engineered systems, and modeling. For this workshop, the scope of natural systems included unmanaged (e.g., grasslands, wetlands, natural forests) and managed (e.g., agricultural lands, commercial forests, forest biofuels) ecosystems. The engineered systems group covered topics in genetically modified plants and microbes, synthetic microbiomes, and altered plant–microbe interactions for enhancing C capture, storage, and utilization. The modeling group focused on computational tools and data collection to predict and assess the effectiveness of new biocarbon sequestration advances. Participant expertise included plant and microbial systems biology, synthetic biology, soil biogeochemistry, and techno-economic analysis. Together, participants outlined key scientific advances in support of biological C capture and storage. Among the major findings of the meeting were the need to better measure C flux within natural, agricultural, and fabricated ecosystems for experimentation; better understand the role of soil composition, plant roots, and the rhizosphere (i.e., the soil surrounding the plant root) in the underground storage of organic C; and design plant–microbe systems for maximal C storage.

54 ENVIRONMENTAL SCIENCES↗

High Energy Experimental Research Effort: Intensity Frontier Physics with Liquid Argon Time Projection Chambers (Final Technical Report DE-SC0017925)

The proposal “University of Florida High Energy Physics Intensity Frontier Research: Liquid Argon Detectors” requested one year of funding support for the PI, one postdoc and one graduate student to start their involvement in ongoing and upcoming experiments that use Liquid Argon Time Projection Chambers (LAr TPCs) to reconstruct neutrino interactions. Specifically, it was proposed that the group join the Short Baseline Near Detector (SBND) at Fermilab and that the PI continue their involvement in the Deep Underground Neutrino Detector (DUNE).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of Transient Groundwater Flow Near the Cheshire Test at Pahute Mesa, Nevada National Security Site

This report focuses on analysis and determination of the causes of transient water levels measured between 1964 and 2017 near the Cheshire underground nuclear test, which was detonated on February 14, 1976 in Area 20 (USDOE, 2015) of the Pahute Mesa (PM) testing areas of the Nevada National Security Site (NNSS) located in southern Nevada (Figure 1). Transient water levels near Cheshire indicate influences of a water-production well and yet-unexplained water level rise attributed to testing effects (Jackson and Fenelon, 2018; Jackson et al. 2021). Transient groundwater flow is relevant to the implementation of the hydrologic source term (HST), which prescribes the quantity and release rates of radionuclide source terms to be applied at individual test locations in assessment of regional-scale radionuclide transport (Carle and Tompson, 2021; Carle et al., 2021), as previously investigated for NNSS testing areas at PM (Pawloski et al., 2001), Frenchman Flat (Carle et al, 2007), Yucca Flat (Mcnab, 2009; Tompson, 2009), and Rainier Mesa (Carle, 2011; Tompson et al., 2011).

54 ENVIRONMENTAL SCIENCES↗