Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Templates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

CoCrPt antidot arrays with perpendicular magnetic anisotropy made on anodic alumina templates

Ti(5 nm)/CoCrPt(5-20 nm) bilayers with perpendicular magnetic anisotropy were deposited by rf sputtering onto porous alumina films to form antidot arrays with period 105 nm and pore diameters ranging from 18 to 56 nm. The coercivities of the antidot arrays are greater than those of unpatterned films and show only a weak dependence on antidot diameter. Magnetic force microscopy of ac-demagnetized samples shows that the antidot arrays have domain sizes larger than the 105 nm period. The magnetic behavior is discussed in terms of domain wall pinning by the antidots.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation between YBa{sub 2}Cu{sub 3}O{sub 7} nuclei density and the grain orientation of the CeO{sub 2} buffered Ni-W template of the second-generation superconducting wire.

The prime goal of the second-generation superconducting wire technology is to grow high-quality epitaxial layers of YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO) superconductor using high-rate deposition on low-cost, kilometer-long substrates. We analyze the influence of Ni-W RABiTS{trademark} substrate grain misalignment on nucleation of epitaxial YBCO during metal-organic ex situ processing. Electron backscatter diffraction orientation maps are correlated with YBCO nuclei density obtained from scanning-electron microscopy. A critical Ni-W grain tilt misorientation angle of 8.5{sup o} was identified above which the YBCO nuclei density was observed to be extremely low, approaching zero. A proposed model explains the reduction in nuclei density as being due to the absence of (001) substrate terraces wide enough to accommodate the critical size for YBCO nuclei. This study emphasizes the strong effect of the out-of-plane tilt of substrate grains on superconducting properties of YBCO layers produced by metal-organic deposition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-Crystal-Like, c-axis Oriented BaTiO 3 Thin Films with High-Performance on Flexible Metal Templates for Ferroelectric Applications

Epitaxial, c-axis oriented BaTiO{sub 3} thin films were deposited using pulsed laser ablation on flexible, polycrystalline Ni alloy tape with biaxially textured oxide buffer multilayers. The high quality of epitaxial BaTiO{sub 3} thin films with P4mm group symmetry was confirmed by x-ray diffraction. The microscopic ferroelectric domain structure and the piezoelectric domain switching in these films were confirmed via spatially resolved piezoresponse mapping and local hysteresis loops. Macroscopic measurements demonstrate that the films have well-saturated hysteresis loops with a high remanent polarization of {approx} 11.5 {micro}C/cm{sup 2}. Such high-quality, single-crystal-like BaTiO{sub 3} films on low-cost, polycrystalline, flexible Ni alloy substrates are attractive for applications in flexible lead-free ferroelectric devices.

36 MATERIALS SCIENCE↗

Persistent template effect in InAs/GaAs quantum dot bilayers

The dependence of the optical properties of InAs/GaAs quantum dot (QD) bilayers on seed layer growth temperature and second layer InAs coverage is investigated. As the seed layer growth temperature is increased, a low density of large QDs is obtained. This results in a concomitant increase in dot size in the second layer, which extends their emission wavelength, reaching a saturation value of around 1400 nm at room temperature for GaAs-capped bilayers. Capping the second dot layer with InGaAs results in a further extension of the emission wavelength, to 1515 nm at room temperature with a narrow linewidth of 22 meV. Addition of more InAs to high density bilayers does not result in a significant extension of emission wavelength as most additional material migrates to coalesced InAs islands but, in contrast to single layers, a substantial population of regular QDs remains.

36 MATERIALS SCIENCE↗

Synthesis of Cu Nanowires with Polycarbonate Template

Copper nanowires were fabricated into arrays of pores on ion-track etched polycarbonate membrane, using electrodeposition technique. We coated Au thin film layer on one side of membrane in order to have electrical contact. X-ray diffraction analysis shows that the Au layer has a strong (111) texture. The pores which have cylindrical shape with 6 micron length and 30 nm diameter were filled by copper atoms, fabricating Cu nanowires. Energy Disperse Spectrometry (EDS) indicated the picks of copper which filled the pores of substrate. The morphology and structure of Cu nanowires were characterized by SEM, TEM and XRD, respectively. The results show that although all the nanowires do not have uniform diameter, but all of them are continuous along the length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ferromagnetic nanocylinders electrodeposited into nanoporous alumina template: A magnetometry and Brillouin light scattering study

The static magnetization experimental behavior of cobalt (Co), Permalloy (Py), and nickel (Ni) nanocylinders is obtained from vibrating sample magnetometry while the dynamic behavior for the Co and Py ones is analyzed by means of Brillouin light scattering spectroscopy. Assuming the presence at remanence of two populations of cylinders with up and down magnetizations and including the dipolar coupling between the cylinders, a single analytical model based on a mean-field approach allowed us to satisfactorily analyze both series of experimental results. The model requires three physical parameters, allowing us to derive the in-plane saturation field, the eigenfrequency in the absence of applied field, and the eigenfrequency at the in-plane saturation field; these parameters enable us to adjust the whole variation of the eigenfrequency versus the applied field. Moreover, the effect of the magnetocrystalline anisotropy on the softening of the frequency in the nonsaturated state is clearly evidenced: it is more pronounced when the magnetocrystalline anisotropy is not vanishing and adds to the shape anisotropy (Co c-axis parallel to the cylinder axis); the softening being weak in the other cases (Co c-axis perpendicular to the cylinder axis or Permalloy).

36 MATERIALS SCIENCE↗

TiO{sub 2} as an electrostatic template for epitaxial growth of EuO on MgO(001) by reactive molecular beam epitaxy

We investigate the initial growth modes and the role of interfacial electrostatic interactions of EuO epitaxy on MgO(001) by reactive molecular beam epitaxy. A TiO{sub 2} interfacial layer is employed to produce high quality epitaxial growth of EuO on MgO(001) with a 45 deg. in plane rotation. For comparison, direct deposition of EuO on MgO, without the TiO{sub 2} layer shows a much slower time evolution in producing a single crystal film. Conceptual arguments of electrostatic repulsion of like-ions are introduced to explain the increased EuO quality at the interface with the TiO{sub 2} layer. It is shown that ultrathin EuO films in the monolayer regime can be produced on the TiO{sub 2} surface by substrate-supplied oxidation and that such films have bulk Curie temperatures.

36 MATERIALS SCIENCE↗

Vacancy-type defects in In{sub x}Ga{sub 1−x}N grown on GaN templates probed using monoenergetic positron beams

Native defects in In{sub x}Ga{sub 1−x}N layers grown by metalorganic chemical vapor deposition were studied using monoenergetic positron beams. Measurements of Doppler broadening spectra of the annihilation radiation and lifetime spectra of positrons for a 200-nm-thick In{sub 0.13}Ga{sub 0.87}N layer showed that vacancy-type defects were introduced by InN alloying, and the major species of such defects was identified as complexes between a cation vacancy and nitrogen vacancies. The presence of the defects correlated with lattice relaxation of the In{sub 0.13}Ga{sub 0.87}N layer and the increase in photon emissions from donor-acceptor-pair recombination. The species of native defects in In{sub 0.06}Ga{sub 0.94}N layers was the same but its concentration was decreased by decreasing the InN composition. With the layer thickness increased from 120 nm to 360 nm, a defect-rich region was introduced in the subsurface region (<160 nm), which can be associated with layer growth with the relaxation of compressive stress.

36 MATERIALS SCIENCE↗

Superior dielectric properties for template assisted grown (100) oriented Gd{sub 2}O{sub 3} thin films on Si(100)

We report about the single crystalline growth and dielectric properties of Gd{sub 2}O{sub 3}(100) thin films on Si(100) surface. Using a two step molecular beam epitaxy growth process, we demonstrate that controlled engineering of the oxide/Si interface is a key step to achieve the atypical (100) oriented growth of Gd{sub 2}O{sub 3}. Unusually, high dielectric constant values (∼23–27) were extracted from capacitance voltage measurements. Such effect can be understood in terms of a two dimensional charge layer at the Gd{sub 2}O{sub 3}/Si interface (W. Sitaputra and R. Tsu, Appl. Phys. Lett. 101, 222903 (2012)) which can influence the dielectric properties of the oxide layer by forming an additional negative quantum capacitance.

36 MATERIALS SCIENCE↗

Dislocation engineering in SiGe on periodic and aperiodic Si(001) templates studied by fast scanning X-ray nanodiffraction

Fast-scanning X-ray nanodiffraction microscopy is used to directly visualize the misfit dislocation network in a SiGe film deposited on a pit-patterned Si substrate at the beginning of plastic relaxation. X-ray real-space diffracted intensity maps are compared to topographic atomic force microscopy images, in which crosshatch lines can be seen. The change in intensity distribution as a function of the incidence angle shows localized variations in strain within the SiGe film. These variations, which reflect the order imposed by the substrate pattern, are attributed to the presence of both bunches of misfit dislocations and defect-free regions.

36 MATERIALS SCIENCE↗

“Conductive” yttria-stabilized zirconia as an epitaxial template for oxide heterostructures

We report an in situ thermochemical treatment that significantly increases the macroscopic electrical conductivity of insulating yttria-stabilized zirconia (YSZ) (001) single-crystalline substrates. We demonstrate the high-quality surface crystalline structure of the resulting “conductive” cYSZ (001) by low- and high-energy electron diffraction. Soft- and hard X-ray photoemission spectroscopy measurements reveal a sizable reduction of Zr cations to a metallic state and their homogeneous distribution within the cYSZ. We discuss the correlation between the microscopic chemical processes leading to the increased macroscopic metallicity. Finally, the heteroepitaxial growth of a functional magnetic oxide model system, ultrathin EuO on cYSZ (001), was demonstrated. cYSZ (001) thereby enables both high quality oxide heteroepitaxy and the advanced sample characterization by high electron-fluence characterization techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Template assisted self-assembly of iron oxide nanoparticles: An x-ray structural analysis

We have fabricated by e-beam lithography periodic arrays of rectangular shaped trenches of different widths into Si substrates. The trenches were filled with iron oxide nanoparticles, 20 nm in diameter, by spin-coating them onto the Si substrate. The trenches have the purpose to assist the self-assembly of the iron oxide nanoparticles. Using x-ray scattering techniques, we have analyzed the structure factor of the trenches before and after filling in order to determine the filling factor. We present a theoretical analysis of the x-ray scattering function within the distorted-wave Born approximation and we present a quantitative comparison between theory and experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-quality II-VI films grown on amorphous substrates using tunable tetradymite templates

We demonstrate the growth of highly oriented CdSe and ZnTe films at ~300 °C on amorphous substrates such as glass and flexible polyimide using ultrathin tetradymite buffer layers composed of Sb x Bi 2-x Te 3 alloys lattice-matched to the film overgrowth. This leads to significant improvement of the crystallinity, roughness, grain size, and pit density of the II-VI overlayer along with enhancement of the optoelectronic properties. For example, photoluminescence emission is observed at ~1.74 eV for optimized CdSe films, the same as in a single crystal reference. An in-plane carrier diffusion length of ~500 nm is inferred from transient optical data. The use of tetradymite buffer layers to control II-VI compound deposition on non-crystalline substrates is a promising route for large area optoelectronic applications such as photovoltaic, light-emission, or infrared detector devices.

36 MATERIALS SCIENCE↗

Electron tomography of (In,Ga)N insertions in GaN nanocolumns grown on semi-polar (112{sup -}2) GaN templates

We present results of scanning transmission electron tomography on GaN/(In,Ga)N/GaN nanocolumns (NCs) that grew uniformly inclined towards the patterned, semi-polar GaN(112{sup -}2) substrate surface by molecular beam epitaxy. For the practical realization of the tomographic experiment, the nanocolumn axis has been aligned parallel to the rotation axis of the electron microscope goniometer. The tomographic reconstruction allows for the determination of the three-dimensional indium distribution inside the nanocolumns. This distribution is strongly interrelated with the nanocolumn morphology and faceting. The (In,Ga)N layer thickness and the indium concentration differ between crystallographically equivalent and non-equivalent facets. The largest thickness and the highest indium concentration are found at the nanocolumn apex parallel to the basal planes.

36 MATERIALS SCIENCE↗

Preparing magnetic yttrium iron garnet nanodot arrays by ultrathin anodic alumina template on silicon substrate

Ultrahigh density periodically ordered magnetic yttrium iron garnet (Y{sub 3}Fe{sub 5}O{sub 12}, YIG) nanodot arrays have been prepared by pulsed laser deposition through an ultrathin alumina mask (UTAM). UTAM having periodically ordered circularly shaped holes with 350 nm in diameter, 450 nm in inter-pore distance, and 700 nm in height has been prepared on silicon substrate. Furthermore, the microstructure and magnetic properties of YIG nanodot arrays have been characterized. Nanodot arrays with a sharp distribution in diameter centered at 340 nm with standard deviation of 10 nm have been fabricated. Moreover, typical hysteresis loops and ferromagnetic resonance spectra in in-plane and out-of-plane revealed that this unique structure greatly influences the magnetics properties of YIG. First, coercivity of YIG nanodot arrays in in-plane was increased about from 15 Oe of YIG films to 500 Oe. Then, the degree of uniformity about nanodot height decided that two or more resonance peaks in out-of-plane were detected in the spectra. The peak-to-peak linewidth values were about 94 Oe and 40 Oe in the parallel and perpendicular directions, respectively, which indicated that the values were larger by the two-magnon scattering. Consequently, this pattering method creates opportunities for studying physics in oxide nanomagnets and may be applied in spin-wave devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗