SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In this presentation we shall review NASA Orbital Debris Engineering Model (ORDEM) scope, intended use, and version history; development of the latest version, v. 3.1; provide a current development status; and discuss current deployment plans. We will also place ORDEM in context with other NASA and US models as well as the ESA MASTER model, ORDEM’s closest analogue model.
Water management on ISS is responsible for the provision of water to the crew for drinking water, food preparation, and hygiene, to the Oxygen Generation System (OGS) for oxygen production via electrolysis, to the Waste & Hygiene Compartment (WHC) for flush water, and for experiments on ISS. This paper summarizes water management activities on the ISS US Segment as of May 2018 and provides a status of the performance and issues related to the operation of the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA).
The Lunar Reconnaissance Orbiter (LRO) has been orbiting the Moon since 2009, obtaining unique and foundational datasets important to understanding the evolution of the Moon and the Solar System. The high-resolution data acquired by LRO benefit from precise orbit determination (OD), limiting the need for geolocation and co-registration tasks. The initial position knowledge requirement (50 m) was met with radio tracking from ground stations, after combination with LOLA altimetric crossovers. LRO-specific gravity field solutions were determined and allowed radio-only OD to perform at the level of 20 m, although secular inclination changes required frequent updates. The high-accuracy gravity fields from GRAIL, with <10 km spatial resolution, further improved the radio-only orbit reconstruction quality (<10 m). However, orbit reconstruction is in part limited by the 0.3-0.5 mm/s measurement noise level in S-band tracking. One-way tracking through Laser Ranging can supplement the tracking available for OD with 28-Hz ranges with 20-cm single-shot precision, but is available only on the nearside (the lunar hemisphere facing the Earth due to tidal locking). Here, we report on the status of the OD effort since the beginning of the mission, a period spanning more than seven years. We describe modeling improvements and the use of new measurements. In particular, the LOLA altimetric data give accurate, uniform, and independent information about LRO's orbit, with a different sensitivity and geometry which includes coverage over the lunar farside and is not tied to ground-based assets. With SLDEM2015 (a combination of the LOLA topographic profiles and the Kaguya Terrain Camera stereo images), another use of altimetry is possible for OD. We extend the 'direct altimetry' technique developed for the ICESat mission to perform OD and adjust spacecraft position to minimize discrepancies between LOLA tracks and SLDEM2015. Comparisons with the radio-only orbits are used to evaluate this new tracking type, of interest for the OD of future lunar orbiters carrying a laser altimeter. LROC NAC images also provide independent accuracy estimation, through the repeated views taken of anthropogenic features for instance.
A suite of automated scientific instruments (the Apollo Lunar Surface Experiment Package, or ALSEP) was installed at each of the landing sites of Apollo 12, 14, 15, 16, and 17 from 1969 to 1972. They operated from deployment until decommissioning on 30 September 1977. These data were continuously transmitted to Earth and saved on the Range Tapes, which were recorded at the Manned Space Flight Network stations. These data were also broken out by experiment and sent to the experiment Principal Investigators on what were called the P.I. Tapes. Starting in April 1973 the Range Tape data were stored in digital format on 7-track magnetic tapes, the ARCSAV Tapes. In February 1976, the handling of the Range Tapes was transferred to UT Galveston. They produced 9-track tapes referred to as the Work Tapes. Following the Apollo program the Range and ARCSAV tapes, which were never archived, were lost. The Work Tapes were archived at the National Space Science Data Center (NSSDC). Some investigators archived their individual experiment data with NSSDC as well, but much of the data had minimal documentation, were not in digital form, or were stored in difficult to translate formats. Data from many experiments were never delivered to the NSSDC. The Lunar Data Project was started to address the problem of both missing and not readily usable data. Our effort has resulted in recovery of some of the ARCSAV tapes, recovery and digitization of a large volume of Apollo scientific and technical documentation, and restoration of many ALSEP and other Apollo data collections. Restoration involves deciphering formats, assembling necessary ancillary data (metadata), and packaging data in digital format to be archived with the Planetary Data System (PDS). Recovery of the data from the ARCSAV tapes involved having the tapes read on special equipment and extracting the individual experiment data out of the integrated data stream. We will report on the history and status of the various recovery efforts.
This is a set of slides for a 2 min talk at the OPAG meeting to update the community on the current status of PICA and future needs. The current vendor for manufacturing rayon for the heritage PICA has discontinued the production and as a result, the community needs to be aware of the efforts underway to consider options and demonstrate manufacturing as well as obtain properties and thermal response model of an alternate rayon based PICA that is sustainable for missions in support of upcoming New Frontiers and future Discovery Missions of Opportunity.
This paper presents a status update for the shock layer radiation validation studies conducted at NASA. A review of the present capability for the simulation and validation of shock layer radiation is presented as well as providing an overview of the data obtained from the Electric Arc Shock Tube (EAST). The paper will include details covering updated convective and radiative heating correlations, provide an overview of the development of new kinetics for Mars entry and detail some recent work calculating after-body radiation. Furthermore, the paper will highlight conditions where there is high confidence in the validation of EAST data (e.g. Earth entry for speeds greater than approximately 10 kms and for many Mars entry conditions) and where further experimental data would be highly beneficial (e.g. lower speed Earth entry around 7.5 to 10 kms and higher speed CO2 entries relevant to Venus). Nominal test conditions for both Earth and Mars are provided for future potential facility-to-facility comparisons.
The Stratospheric Observatory for Infrared Astronomy (SOFIA) is an airborne observatory, carrying a 2.5 m telescope onboard a heavily modified Boeing 747SP aircraft. SOFIA is optimized for operation at infrared wavelengths, much of which is obscured for ground-based observatories by atmospheric water vapor. The SOFIA science instrument complement consists of seven instruments: FORCAST (Faint Object InfraRed CAmera for the SOFIA Telescope), GREAT (German Receiver for Astronomy at Terahertz Frequencies), HIPO (High-speed Imaging Photometer for Occultations), FLITECAM (First Light Infrared Test Experiment CAMera), FIFI-LS (Far-Infrared Field-Imaging Line Spectrometer), EXES (Echelon-Cross-Echelle Spectrograph), and HAWC (High-resolution Airborne Wideband Camera). FORCAST is a 540 m imager with grism spectroscopy, developed at Cornell University. GREAT is a heterodyne spectrometer providing high-resolution spectroscopy in several bands from 60240 m, developed at the Max Planck Institute for Radio Astronomy. HIPO is a 0.31.1 m imager, developed at Lowell Observatory. FLITECAM is a 15 m wide-field imager with grism spectroscopy, developed at UCLA. FIFI-LS is a 42210 m integral field imaging grating spectrometer, developed at the University of Stuttgart. EXES is a 528 m high-resolution spectrograph, developed at UC Davis and NASA ARC. HAWC is a 50240 m imager, developed at the University of Chicago, and undergoing an upgrade at JPL to add polarimetry capability and substantially larger GSFC detectors. We describe the capabilities, performance, and status of each instrument, highlighting science results obtained using FORCAST, GREAT, and HIPO during SOFIA Early Science observations conducted in 2011.
This presentation provides mission operations status for the Earth Observing System (EOS) Aura satellite for the past six-months (June 2018 through November 2018). It only contains information that is of interest to the International Earth Science Constellation (ESC) Mission Operations Working Group (MOWG) member missions.
After five years of development following the launch of the Global Precipitation Measurement (GPM) missionCore Observatory, the GPM data products are now being extended across the joint Tropical Rainfall MeasuringMission (TRMM) and GPM eras. Version 06 of the U.S. GPM team's Integrated Multi-satellitE Retrievals forGPM (IMERG) merged precipitation product provides a consistent intercalibration for all precipitation productscomputed from individual satellites with the TRMM and GPM Core Observatory sensors as the TRMM- andGPM-era calibrators, respectively, and incorporates monthly surface gauge data. One major change in the basicIMERG algorithm for V06 is that precipitation motion vectors (used to drive the quasi-Lagrangian interpolation,or "morphing") are computed by tracking vertically integrated vapor (TQV) fields analyzed in MERRA2 andGEOS5. This innovation provides globally complete coverage, expanding IMERG's coverage beyond the 60N-Slatitude band previously provided by IR-based vectors, although precipitation over snowy/icy surfaces is stillmasked out as unreliable. A second innovation is that the Quality Index (QI) data field computed for the half-hourlydatasets has been refined to include estimates of correlation at microwave overpass times.We will summarize the processing status for V06 IMERG, for which the retrospective processing shouldbe actively advancing at meeting time. We will show early examples of performance. For example, the TQVmotion vectors are typically slightly better than the IR-based vectors at all latitudes. The transition across theTRMM/GPM data boundary will be discussed, including the necessity of filling in the TRMM-based calibrationsover the latitude band 35-65 in each hemisphere. The notional schedule for the eventual retirement of thepredecessor TRMM Multi-satellite Precipitation Analysis (TMPA) multi-satellite dataset will be updated as well.
In 2006, NASA rotorcraft research was refocused to emphasize high-fidelity “first-principles” predictive tool development and validation. As part of this new emphasis, documenting the status of NASA rotorcraft research and defining the state-of-the-art in rotorcraft predictive capability were undertaken. This report is the result of this two-year effort. Contributors to this work encompass a wide range of expertise covering the technical disciplines of aeromechanics, acoustics, computational fluid dynamics (CFD), flight dynamics and control, experimental capabilities, propulsion, structures and materials, and multi-disciplinary analysis.
Solar energetic particle (SEP) events are related to both solar flares and coronal mass ejections (CMEs) and they present energy spectra that span from a few keV up to several GeV. A wealth of observations from widely distributed spacecraft have revealed that SEPs fill very broad regions of the heliosphere, often all around the Sun. High energy SEPs can sometimes be energetic enough to penetrate all the way down to the surface of the Earth and thus be recorded on the ground as ground level enhancements (GLEs). The conditions of the radiation environment are currently unpredictable due to an as-yet incomplete understanding of solar eruptions and their corresponding relation to SEP events. This is because the complex nature and the interplay of the injection, acceleration and transport processes undergone by the SEPs in the solar corona and the interplanetary space prevent us from establishing an accurate understanding (based on observations and modelling). In this work, we review the current status of knowledge on SEPs, focusing on GLEs and multi-spacecraft events. We extensively discuss the forecasting and nowcasting efforts of SEPs, dividing these into three categories. Finally, we report on the current open questions and the possible direction of future research efforts. This article is part of the theme issue ‘Solar eruptions and their space weather impact’.
With NASA funding, the Deep Space Optical Communication (DSOC) Project at JPL is planning a system level technology demonstration of optical communications from deep space. A 22 cm diameter flight laser transceiver (FLT) is being developed for space flight. The FLT will be designed to transmit an average laser power of 4W at 1550 nm and receive a weak 1064 nm laser signal (> 100 femtowatts). Use of the Hale telescope at Palomar Mountain, CA, retrofitted with a photoncounting receiver to detect the downlink from space, is planned. The Optical Communication Telescope Laboratory (OCTL) at Table Mountain, CA will transmit a 1064 nm laser beacon to serve as a pointing reference for the FLT and support low-rate uplink data-rates. The DSOC FLT is part of the baseline payload for the Psyche mission spacecraft recently selected for flight by NASA, providing link demonstration opportunities during the mission cruise phase. Link demonstration opportunities at distances of approximately 0.1 to 2 astronomical units (AU) are expected. The DSOC system is being designed to support downlink data-rates of 0.2 to > 200 Mb/s and uplink data rates of approximately 1.6 kb/s. A status update of DSOC Project activities on flight and ground development will be summarized in this paper.
This paper discusses the current focus of NASA's Advanced Space Suit Pressure Garment Technology Development team's efforts, the status of that work, and a summary of longer term technology development priorities and activities. The Exploration Extra-vehicular Activity Unit (xEMU) project's International Space Station Demonstration Suit (xEMU Demo) project continues to be the team's primary customer and effort. In 2018 the team was engaged in addressing hardware design changes identified in the Z-2 pressure garment prototype Neutral Buoyancy Laboratory (NBL) test results. These changes will be discussed. Additionally components whose first iterations were produced in 2018 will be discussed. A full pressure garment prototype, termed Z-2.5, was assembled that is composed of updated and first prototype iteration hardware. Z-2.5 NBL testing, performed from October 2018 through April 2019 will inform final design iterations in preparation for the xEMU Demo preliminary design review planned to occur in the third quarter of government fiscal year 2019. A primary objective of the Z-2.5 NBL testing is to validate changes made to the hard upper torso geometry, which depart from the planetary walking suit upper torso geometry that has been used over the last 30 years. The team continues to work technology development, with GFY2018 work being used to supplement and feed the gaps left by the scope defined for the xEMU Demo. Specifically, a Phase IIx Small Business Innovative Research Grant to mature durable bearings that are compatible with a dust environment and a grant funded by the Science Technology Mission Directorate, Lightweight and Robust Exploration Space Suit (LARESS) project, to mature planetary impact requirements and hardware will be described. Finally, a brief review of longer-term pressure garment challenges and technology gaps will be presented to provide an understanding of the advanced pressure garment team's technology investment priorities and needs.
This presentation provides a status of the xEMU ISS Demo project and the approach to requirements definition related to certification and extensibility considerations.
The topic of this presentation is a mission status, current baseline radiometer science performance, overall science recovery scope, enhanced resolution passive product development, radiometer-derived F-T product, and SMAP Radiometer and Sentinel Radar Active-Passive product.
This presentation provides description of the field evaluation of surface metering deployed by NASA in Charlotte International Airport (CLT) that began with a more tactical decision timeline and progressively expanded toward more strategic timelines. This will include an update on the latest status of the ongoing research and lessons learned.
Concept overview and status for the ATD-3 (Air Traffic Management Technology Demonstration-3) Dynamic Routes for Arrivals in Weather (ATD-3 DRAW) project.
This report gives the status of the WGISS Connected Data Assets project within the Committee on Earth Observation Satellites (CEOS) Working Group on Information Systems and Services (WGISS).