Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “State functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Stereochemical Control of Water Transport Properties in Thiol‐yne Polymers

Barrier polymers underpin almost every commercial sector, yet the needs of several emerging areas remain unmet by commercially‐available materials, including temporary orthopedic implants, transient health monitors, neural implants, and other long‐term implants. The ability to tune polymer composition independently of polymer structure positions thiol‐yne click chemistry as a promising platform to serve these emerging technologies. Here, this work describes the differences in the hierarchical structure of stoichiometrically identical materials which differ only in the proportion of the cis versus trans backbone alkene stereochemistry. Varying the isomer content in this way directs different temperature and rate dependent crystallization behavior, which affords control over micron‐scale structure. This investigation focuses on how these stereochemical features affect the water vapor permeation process by several methods and develops an understanding of how this unique structural regularity improves barrier performance relative to a commercially available water barrier polymer, poly(ethylene terephthalate).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Physical patterning of high-Q superconducting niobium resonators via ion beam etching

The development of superconducting quantum circuits increasingly involves the exploration of chemically distinct materials and complex multilayered structures. Accelerating this trend may benefit from low-damage, materials-agnostic patterning techniques that are compatible with a broad range of materials. Here, in this work, we investigate the utility of low-energy ion beam etching (IBE), a physical patterning technique, as an alternative to reactive ion etching for fabricating low-loss superconducting resonators. We use niobium (Nb) resonators as a test platform, leveraging their well-characterized performance metrics for benchmarking. To address IBE-induced surface redeposition, we introduce an in situ aluminum capping layer combined with targeted post-fabrication chemical treatment. This strategy yields resonators with internal quality factors as high as 6 × 10 5 in the single-photon regime at 50 mK. These results establish low-energy IBE as a promising patterning technique for superconducting devices, with the potential to accelerate development across chemically diverse and multilayered material platforms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Giant Doping Response of Magnetic Anisotropy in MnTe

Developing simple ways to control spin states in spintronic devices is a crucial step towards increasing their functionality. MnTe is a room-temperature antiferromagnet with promising spintronic properties, including for thermospintronics and magnon-based devices. Here, we show that, in MnTe, less than 1% Li is sufficient to produce a dramatic spin reorientation as observed by neutron diffraction. The behavior of the 0001 magnetic Bragg peak reveals a significant reorientation of the Mn spins from planar in the pure material to almost completely axial with minimal Li doping. Temperature dependence of the magnetic peaks in Li-doped samples indicates that axial spins shift back to planar suddenly upon approaching the Néel temperature (T N = 307 K). Density functional theory calculations support the idea that a shift in the Fermi level caused by doping is responsible for switching the material between two competing magnetic ground states. These results pave the way for developing easy switching of magnetic states in functional materials such as spintronic devices and topological insulators.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Computational Implementation of a Thermodynamically Based Work Potential Model For Progressive Microdamage and Transverse Cracking in Fiber-Reinforced Laminates

A continuum-level, dual internal state variable, thermodynamically based, work potential model, Schapery Theory, is used capture the effects of two matrix damage mechanisms in a fiber-reinforced laminated composite: microdamage and transverse cracking. Matrix microdamage accrues primarily in the form of shear microcracks between the fibers of the composite. Whereas, larger transverse matrix cracks typically span the thickness of a lamina and run parallel to the fibers. Schapery Theory uses the energy potential required to advance structural changes, associated with the damage mechanisms, to govern damage growth through a set of internal state variables. These state variables are used to quantify the stiffness degradation resulting from damage growth. The transverse and shear stiffness of the lamina are related to the internal state variables through a set of measurable damage functions. Additionally, the damage variables for a given strain state can be calculated from a set of evolution equations. These evolution equations and damage functions are implemented into the finite element method and used to govern the constitutive response of the material points in the model. Additionally, an axial failure criterion is included in the model. The response of a center-notched, buffer strip-stiffened panel subjected to uniaxial tension is investigated and results are compared to experiment.

Pineda, Evan J.↗
NASA NTRS1984

Fluorescence from photofragments as an aid in identifying new molecular states - The N2 case

Synchrotron radiation has been used to measure the excitation function for producing fluorescence in the 1050-1800 A region through photodissociative excitation of N2 in the 400-620 A region and the photoabsorption cross section of N2 in the 600-670 A region. From the fluorescence excitation function there is found (1) a molecular state(s) in the 21-22.5 eV region which has not been observed in absorption and photoionization spectra, (2) structures which correlate with known two-electron excited Rydberg states, and (3) a decrease in fluorescence cross section at photon energies greater than 23.8 eV, which indicates the existence of new competing processes. The observed molecular state(s) as well as the weak absorption structure in the 19-21 eV region are tentatively assigned as a Rydberg series leading to the D2Pi(g) of N2(+). The newly observed Rydberg states in the 21-22.5 eV region may account for the unusual behavior recently reported in photoelectron spectroscopy results.

Wu, C. Y. R.↗
DOE OSTI2020

DFT Plus DMFT Study of Spin-Charge-Lattice Coupling in Covalnt LaCoO{siub 3}.

We study energetics and the nature of both homogeneous and mixed spin (MS) states in LaCoO3 incorporating structural changes of the crystal volume expansion and the Co-O bond disproportionation (BD) during the spin-state transition using the density functional theory plus dynamical mean field theory (DFT + DMFT) method. DFT + DMFT predicts that energetics of both excited spin states are almost the same while DFT + U calculations of the same structures energetically favor the MS states and produce various metastable solutions whose energetics depend sensitively on final spin states. Within DFT + DMFT, the homogeneous spin state in the expanded crystal volume shows the multiconfigurational nature with non-negligible occupancy probabilities of both high spin (HS) and low spin (LS) states along with d(6) and d(7) charge configurations indicating the dynamically fluctuating nature of spin and charge states due to the Co-O covalency. The nature of the MS state under the BD structure reveals that Co sites with the long Co-O bonds develop a Mott insulating state and favor HS with a d(6) configuration, while more covalent Co sites with the short Co-O bonds occupy more LS states with a d(7) configuration and behave as a band insulator, as a result, charge ordering is induced in the BD structure from the spin-state ordering. We also find that both energetics and electronic structure sensitively depend on the Co-O covalency effect, which can be tuned by changing the double counting potential and the resulting d occupancy (N-d), and N-d close to 6.7 is consistent with the nature of the spin-state transition. Our results show that structural changes during the spin-state transition can play an important role in understanding energetics and electronic structure of LaCoO3.

Park, Hyowon↗
DOE OSTI2024

A strain density function to analyze particle size effects during high velocity impacts of yttria

Here, the impact behavior of a single yttria (Y 2 O 3 ) nanoparticle onto a Y 2 O 3 substrate is studied as a function of particle velocity (300–1200 m/s) and diameter (12–50 nm) using molecular dynamics simulations. To analyze the results, a strain density function is developed to provide both quantitative and qualitative information about the deformation mechanisms that contribute to the final state of the system. This function provides both clear evidence of shear localization and insight into the conditions for which localization occurs during the impact of Y 2 O 3 particles as they approach experimentally relevant sizes. Further analysis shows that localization and fragmentation only occur for Y 2 O 3 impacts with diameters of at least 50 nm, while particles with diameters of 25 nm and smaller deform primarily by amorphization and viscous flow. Implications for the deposition of films of Y 2 O 3 and other rare-earth oxides via the micro cold spray process are discussed.

36 MATERIALS SCIENCE↗
NASA NTRS1972

The inverse problem of the optimal regulator.

The inverse problem of the optimal regulator is considered for a general class of multi-input systems with integral-type performance indices. A new phase variable canonical form is shown to be convenient for this analysis. The advantage of the canonical form is to separate the state variables into subvectors of directly controlled, indirectly controlled, and uncontrollable components. Necessary and sufficient conditions for optimized performance indices are given. With the nonlinearities of the system restricted to functions of the directly controlled state variables, additional results are developed about the nonnegative property of optimized loss functions.

Yokoyama, R.↗
DOE OSTI2020

Towards accurate orbital-free simulations: A generalized gradient approximation for the noninteracting free energy density functional

For orbital-free ab initio molecular dynamics, especially on systems in extreme thermodynamic conditions, we provide the first pseudo-potential-adapted generalized gradient approximation (GGA) functional for the non-interacting free energy. This is achieved by systematic finite-temperature extension of our recent LKT ground state non-interacting kinetic energy GGA functional (Phys. Rev. B 98, 041111(R) (2018)). We test the performance of the new functional first via static lattice calculations on crystalline aluminum and silicon. Then we compare deuterium equation of state results against both path-integral Monte Carlo and conventional (orbital-dependent) Kohn-Sham results. The new functional, denoted LKTF, outperforms the previous best semi-local free energy functional, VT84F (Phys. Rev. B 88, 161108(R) (2013)), and provides modestly faster simulations. Finally, we discuss subtleties of identification of kinetic and entropic contributions to non-interacting free-energy functionals obtained by extension from ground state orbital-free kinetic energy functionals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1984

Discrete approximation methods for parameter identification in delay systems

Approximation schemes for parameter identification problems in which the governing state equation is a linear functional differential equation of retarded type are constructed. The basis of the schemes is the replacement of the parameter identification problem having an infinite dimensional state equation by a sequence of approximating parameter identification problems in which the states are given by finite dimensional discrete difference equations. The difference equations are constructed using linear semigroup theory and rational function approximations to the exponential. Sufficient conditions are given for the convergence of solutions to the approximating problems, which can be obtained using conventional methods, to solutions to the original parameter identification problem. Finite difference and spline based schemes using Paderational function approximations to the exponential are constructed, and shown to satisfy the sufficient conditions for convergence. A discussion and analysis of numerical results obtained through the application of the schemes to several examples is included.

Rosen, I. G.↗
DOE OSTI2025

In-situ monitoring of atomically dispersed Pt sites supported on OMS-2 during CO 2 activation

Atomically dispersed catalysts have drawn great interest lately, as they showcase a high density of active sites, selectivity, and high turnover frequencies in oxidation chemistry due to labile oxygen activation. In contrast, the applications of these catalysts have lagged in reduction reactions due to the ambiguity caused by the sintering and restructuring of active sites. To bridge this gap, the evolution of Pt 4+ isomorphically substituted into an octahedral molecular sieve structure (OMS-2) under reductive conditions was correlatively characterized using multiple in-situ analytical techniques such as ambient pressure X-ray photoelectron spectroscopy, environmental transmission electron microscopy, and solid-state nuclear magnetic resonance. The surface dynamics of the Pt single atoms were revealed during the Reverse Water Gas Shift (RWGS) reaction, where the active sites were identified as two-coordinated platinum single atoms. Under reaction, we show nonbinding atoms adjacent to the single atoms restructured the motif of the single atoms to Pt 2+ via ion mobility of potassium, increasing the activation energy by 25.6 kJ/mol. Here, this work also highlights the potential for increased stability of the single atom sites via isomorphic substitution of the metal oxide support, since the Pt-OMS-2 catalyst retained activity for about 33 h before deactivation, after which nanoparticles were observed in TEM images. This work offers a new perspective in single atom synthesis using the metal oxide as the host for the single atom site, instead of adatoms on the surface

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Zero-Field Splitting Calculations by Multiconfiguration Pair-Density Functional Theory

Zero-field splitting (ZFS) is a fundamental molecular property that is especially relevant for single-molecule magnets (SMMs), electron paramagnetic resonance spectra, and quantum computing. Developing a method that can accurately predict ZFS parameters can be very powerful for designing new SMMs. One of the challenges is to include external correlation in an inherently multiconfigurational open-shell species for the accurate prediction of magnetic properties. Previously available methods depend on expensive multireference perturbation theory calculations to include external correlation. In this paper, we present spin-orbit-inclusive multiconfiguration and multistate pair-density functional theory (MC-PDFT) calculations of ZFSs; these calculations have a cost comparable to complete-active-space self-consistent field (CASSCF) theory, but they include correlation external to the active space. We found that combining a multistate formulation of MC-PDFT, namely, compressed-state multistate pair-density functional theory, with orbitals optimized by weighted-state-averaged CASSCF, yields reasonably accurate ZFS results

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1974

The effects of spline interpolation on power spectral density

This paper discusses the power spectral effects of spline interpolators. A general technique is given for finding the steady-state spectral effects of splines of all orders, when applied following uniform sampling of the input function. The following observations are made: (1) the even order splines that were examined (second and fourth order) possessed divergent steady-state frequency transfer functions, (2) the degree of preservation of the power spectral density of the input process increased with the order of the (odd order) spline used for interpolation, and (3) the reconstruction of a stationary random process over a finite record length will, on the average, have less power than indicated by the steady-state transfer function.

Horowitz, L. L.↗
DOE OSTI2024

Electron-induced chemical transformation of vapor-phase synthesized hybrid resist materials for EUV and beyond EUV lithography

Here, in this study, we utilize an in situ Fourier transform infrared (FTIR) spectroscopy chamber equipped with an electron flood gun to comprehensively investigate the electron-induced chemical transformations in advanced inorganic–organic hybrid resist thin films. The characteristics of the electron gun were assessed, showing a detectable current decrease with increasing Faraday cup bias voltage, confirming that the electron energies impacting the sample were within the expected range. This unique FTIR system was applied to study two hybrid resist thin-film systems, Al–HQ and Zn–HQ, both exhibiting saturation growth characteristics at 150 °C. Results revealed that Al–HQ demonstrated superior electron sensitivity compared to Zn–HQ at energies ≤ 100 eV. Chemical changes observed were consistent with previous findings, underscoring the potential of this methodology to elucidate exposure mechanisms. This research contributes to the fundamental understanding necessary for the development of advanced resist materials for the next-generation nanolithography applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Covalent Organic Frameworks for Water Treatment

Covalent organic frameworks (COFs) are an emerging type of porous crystalline material with highly ordered aperture size and tunable structures with designer properties. COFs have been proposed as promising materials for water treatment because of their notable intrinsic properties like excellent chemostability, high surface area, abundant functional sites, and uniform adjustable aperture size. This review focuses on fundamental COF design principles for water treatment (stability, aperture size, and surface functionalization) and the state-of-the-art application of COFs in desalination, organic contaminant sorption, and ion capture. Additional potential promising applications of COFs for water treatment, including solar steam generation, photocatalysis for degradation of organic contaminants, and capacitive deionization are also presented along with an outlook toward future opportunities in the field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nitrogen‐Nitrogen Bond Breaking in Irradiation Products of Hexanitrohexaazaisowurtzitane (CL‐20)

While the primary result of an interaction of ionizing radiation with an organic material is the ejection of electrons from molecular orbitals producing cations, the free electrons can further interact, yielding excited states; and, potentially, anions. In this work, we computed reaction barriers and energies for N−N bond breaking in the CL-20 cation, anion, and excited state to investigate if CL-20 degradation is accelerated after radiation exposure. We focused on N−N bond dissociation because it is the rate-determining step in the thermal degradation of CL-20. We found that N−N cleavage rapidly takes place in the CL-20 cation and anion with greatly reduced reaction energies as compared to CL-20. We also outlined a potential path for photodissociation of the N−N bond. While CL-20 is kinetically stable, initial degradation occurs readily in its irradiation products. In conclusion, this is of importance for the performance of the explosive after high-dose exposure and influences aging if CL-20 is irradiated at a low dose over extended periods of time.

CL-20 anion↗
DOE OSTI2022

Single-Cell Metabolomics with Rapid Determination of Chemical Formulas from Isotopic Fine Structures

Metabolomic measurements can provide functional readouts of cellular states and phenotypes. Here, we present a protocol for single-cell metabolomics that permits direct untargeted detection of a broad number of metabolites under ambient conditions, without the need for sample processing, and with high confidence in the discovery and identification of the molecular formulas for detected metabolites. This protocol describes combining fiber-based laser ablation electrospray ionization (f-LAESI) with a 21 Tesla Fourier transform ion cyclotron resonance mass spectrometer (21T-FTICR-MS) to obtain high confidence molecular formula information about detected metabolites. The f-LAESI source utilizes mid-infrared laser ablation through a sharp optical fiber tip, affording direct ambient analysis of cells without the need for sample processing. Using the 21T-FTICR-MS as a mass analyzer enabled measurement of the isotopic fine structure (IFS) for numerous metabolites simultaneously from single cells, and the IFSs were in turn computationally processed to rapidly determine the corresponding elemental compositions. This metabolomics technique complements other single cell omics measurement methods, helping to resolve complex molecular interactions that take place within cells unattainable from single cell transcriptomic and proteomics methods.

mass spectrometry, FTICR, FTMS, ultrahigh mass res↗