Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Perovskite solar cells can take the heat

Solar panels must endure extreme conditions during their service lifetime. There are few other products, let alone pristine semiconductor electronics, that are manufactured today and expected to withstand decades of abuse from full exposure to outdoor elements, including harsh ultraviolet sunlight, rain and hail, and daily and seasonal thermal cycles. Over the past decade, a new class of semiconductors, known as metal halide perovskites, has emerged, which constitutes the light-absorbing material in solar panels and has made incredible advancements, potentially taking photovoltaics in new directions. Perovskite materials have been touted as a potential game changer for solar energy production.

14 SOLAR ENERGY↗
DOE OSTI2023

Hot carrier extraction from 2D semiconductor photoelectrodes

Hot carrier-based energy conversion systems could double the efficiency of conventional solar energy technology or drive photochemical reactions that would not be possible using fully thermalized, “cool” carriers, but current strategies require expensive multijunction architectures. Using an unprecedented combination of photoelectrochemical and in situ transient absorption spectroscopy measurements, we demonstrate ultrafast (<50 fs) hot exciton and free carrier extraction under applied bias in a proof-of-concept photoelectrochemical solar cell made from earth-abundant and potentially inexpensive monolayer (ML) MoS 2 . Our approach facilitates ultrathin 7 Å charge transport distances over 1 cm 2 areas by intimately coupling ML-MoS 2 to an electron-selective solid contact and a hole-selective electrolyte contact. Our theoretical investigations of the spatial distribution of exciton states suggest greater electronic coupling between hot exciton states located on peripheral S atoms and neighboring contacts likely facilitates ultrafast charge transfer. Our work delineates future two-dimensional (2D) semiconductor design strategies for practical implementation in ultrathin photovoltaic and solar fuel applications.

2D materials↗
DOE OSTI2022

A Comparison of Time-Series Gap-Filling Methods to Impute Solar Radiation Data: Preprint

Complete solar resource data sets play a critical role at every stage of solar energy projects; however, measured or modeled solar resource data come with significant uncertainties and usually suffer from several issues, including, but not limited to, data gaps and data quality issues. To mitigate these issues, an appropriate data imputation method should be implemented to build a complete and reliable temporal (and spatial) database. Motivated by this, in this study, we extensively compare the performance of eight different gap-filling methods by creating random and artificial data gaps in (i) hourly irradiance data for 1 year using a few locations of the National Solar Radiation Database (NSRDB) and (ii) 1-minute ground measurement data sets from the Surface Radiation Budget Network (SURFRAD) and the National Renewable Energy Laboratory (NREL) stations.

clearness index↗
DOE OSTI2025

Exploring the interplay between distributed wind generators and solar photovoltaic systems

This study investigates the spatial and temporal dynamics of wind and solar energy generation across the continental United States, focusing on energy availability, reliability, variability, and cooperation. Using data from the National Renewable Energy Laboratory, we analyze the performance of wind turbines and photovoltaic systems, revealing distinct patterns in energy production and reliability. The classification of wind and solar zones based on energy availability and reliability provides valuable insights for renewable energy planning and grid integration strategies. Overall, this methodology contributes to understanding wind and solar interactions, which will lead to informing effective renewable energy deployment and grid integration efforts.

14 SOLAR ENERGY↗
DOE OSTI2023

Identifying impacts of process, precursors, and defects in metal halide perovskite solar cells

With efficiencies of halide perovskite solar cells stagnating over the last few years at values above 25% and approaching thermodynamic limits, focus must shift to ensuring stability of these devices over the long term. The overarching goal of this project was to understand the root causes of instability in halide perovskite solar cells. Our approach was rooted in fundamental scientific pursuits, determining at the molecular level those processes responsible for degradation of the metal halide perovskite system, either in the precursor ink, or in the solid state. We then used this understanding to show that degradation leads to midgap states in halide perovskite semiconductors, explaining loss in performance; also, this in-depth understanding allowed us to develop specifically targeted solutions to prevent these degradation mechanisms. These include guidance about amines in perovskite inks, solvents to use (and not to use), and impacts of Cs incorporation to perovskite inks and solids. Finally, we achieved our end-of-project goal and demonstrated an effective lifetime of a halide perovskite solar cell of 5000 h, including measurement of devices over 3000 h, amongst the longest in the field. Overall, this project has considerably pushed forward the science of perovskite degradation and sets examples and groundwork for future studies to enable halide perovskite solar cells to be a successful solar energy conversion technology.

14 SOLAR ENERGY↗
DOE OSTI2022

National Renewable Energy Laboratory History: 1977-2016

Like the political and energy landscape at the time, the birth of the Solar Energy Research Institute (SERI) in 1977, which then became the National Renewable Energy Laboratory (NREL) in 1991, was at times tumultuous. Born from a need for better energy solutions, the newly formed U.S. Department of Energy realized that creating an organization solely dedicated to clean energy was crucial to our nation's ability to achieve energy independence. Forty-five years later, the "little lab in the hills" is at the forefront of clean energy innovation and is helping tackle our most daunting energy challenges. This book documents the creation of SERI and the politics and context of the times, from 1977 to 2016. It's the culmination of extensive independent research and formal oral history interviews - and it took more than a decade to complete. The "NREL History Project" was launched in 2009 to comprehensively record the birth and history of the laboratory to date. The project concluded in 2016 but was put on hold until 2021.

Adams↗
DOE OSTI2024

Minimizing grid energy consumption in wastewater treatment plants: Towards green energy solutions, water sustainability, and cleaner environment

Wastewater treatment plants (WWTPs) consume significant amount of energy to sustain their operation. From this point, the current study aims to enhance the capacity of these facilities to meet their energy needs by integrating renewable energy sources. The study focused on the investigation of two primary solar energy systems in As Samra WWTP in Jordan. The first system combines parabolic trough collectors (PTCs) with thermal energy storage (TES). This system primarily serves to fulfill the thermal energy demands of the plant by reducing the demands from boiler units, which allows more biogas for electricity generation. The second system is a photovoltaic (PV) system with Lithium-Ion batteries, which directly produces electricity that will be used to cover part of the electrical energy demands of plant. To assess the optimal configuration, two distinct scenarios have been formulated and compared to the current case scenario (SC#1). The first scenario focuses on maximizing the net present value (NPV) and minimizing the levelized cost of electricity (LCOE). The second scenario is centred on minimizing the levelized cost of heat (LCOH). The findings indicate that both scenarios succeeded in reducing the reliance on the grid to a value that reach 1 %. Moreover, they both reduced biogas percentage in energy production from 88 % to approximately 65 % through the integration of the PV system. In terms of thermal demand, SC#2 reduced the reliance on biogas boiler units from 100 % to 25 %, while SC#3 achieved an even more impressive reduction to just 8 %. The best LCOE value was attained in SC#2, at 0.0895 USD/kWh, with an NPV of 10.54 million USD. Conversely, SC# 3 yielded an LCOH value of 0.0432 USD/kWh th compared to 0.0534 USD/kWh th USD for SC#2. In conclusion, despite their relatively high capital and operating costs, SC#2 and SC#3 managed to substantially decrease the annual electricity expenditure from approximately 2 million USD to 86,000 USD and 0 USD, respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Quantum Mechanical Evaluation of CZTS Properties for Photovoltaic Applications

As a quaternary semiconductor, CZTS (Cu 2 ZnSnS 4 ) shows promise as a thin-film solar cell material. The constituent elements in CZTS are abundant and non-toxic, and CZTS has an ideal band gap (~1.5 eV) for solar cell applications, which produces a large absorption coefficient. Unfortunately, the low efficiencies and difficulties in synthesizing the desired crystallographic phase (kesterite) and the associated formation of antisite defects limit its deployment. Using theoretical and computational tools, we investigated these current limitations, explored strategies to resolve these issues, and developed design guidelines to improve the efficiency of CZTS-based sunlight absorbers. We first sought to understand the challenges associated with synthesizing the kesterite phase and proposed ways to favor kesterite growth, thus adding to the understanding of CZTS photovoltaics. We also analyzed the major limitations at the atomic scale lowering the efficiency of CZTS: the low open-circuit voltage (V oc ) and the short carrier lifetime, thus addressing the technical effectiveness of CZTS photovoltaics. We believe the latter is due to Shockley-Read-Hall (SRH) recombination centers associated with point defects. We also studied the electronic structure of interfaces and defects introducing such recombination centers, and explored doping strategies to reduce SRH recombination. Ultimately, these efforts will benefit the public by contributing to the development of cheap and efficient solar energy conversion technologies made from abundant, non-toxic materials.

14 SOLAR ENERGY↗
DOE OSTI2021

The Solar Futures Study

The Solar Futures Study explores potential pathways for solar energy to drive deep decarbonization of the U.S. electric grid by 2035, and envisions how further electrification could decarbonize the broader U.S. energy system by 2050.

2050↗
DOE OSTI2022

Into the net zero emissions and climate change control: From solid carbon waste to effective solar convertors

Here, in this work, we demonstrate the potential for solar-to-heat conversion of carbon byproducts and their outstanding effects to reduce anthropogenic emissions. Those carbon byproducts are soots (biomass, evaporated carbon, etc.) as well as morphed graphenes. Our results cover optical characterization to demonstrate their suitability as heat capacitors and solar-to-heat convertors. Our raw materials are sustainable and currently considered environmental pollutants that require true attention to minimize global warming effects. Fortunately, they are ideal candidates to reduce the carbon footprints and can contribute towards a true net-zero environmental transition. We explore and demonstrate that soots are among the most competitive materials to transform solar energy into heat due to their absorption capacity, and durability. These materials are more competitive than commercial products and other known solar convertors demonstrating the superior thermosolar benefits. The best candidate is biomass with solar absorptivity, light emission, and cost reduction of 96, 85% and 15-fold, respectively, when compare to commercial products. Biomass and soot have comparable or better solar conversion characteristics, and sustainability than pristine carbon nanostructures and they are up to 3 orders of magnitude cheaper.

14 SOLAR ENERGY↗
DOE OSTI2025

AgriSolar Clearinghouse

The AgriSolar Clearinghouse (ASC) is a relationship-building, information-sharing network that promotes the co-location of solar energy systems and agriculture. The ASC website became accessible to the public after stakeholder approval, on October 27th, 2021. Phase 2 of the website was completed June 15, 2022, and includes an AgriSolar Atlas and a map of Financial Incentives.

14 SOLAR ENERGY↗
NASA NTRS1972

Conversion of magnetic field energy into kinetic energy in the solar wind

The outflow of the solar magnetic field energy (the radial component of the Poynting vector) per steradian is inversely proportional to the solar wind velocity. It is a decreasing function of the heliocentric distance. When the magnetic field effect is included in the one-fluid model of the solar wind, the transformation of magnetic field energy into kinetic energy during the expansion process increases the solar wind velocity at 1 AU by 17 percent.

Whang, Y. C.↗
DOE OSTI2025

Direct solar self-catalyzing pyrolysis of natural gas to hydrogen and high-quality graphite (Final Technical Report)

This project, led by researchers at UCLA in partnership with Southwest Solar Technology (SST) and SolGrapH, successfully demonstrated a new method for producing clean hydrogen fuel and high-quality graphite using concentrated solar energy. The primary goal was to develop a technology that converts natural gas (primarily methane) into two valuable products—hydrogen gas and solid carbon—without releasing carbon dioxide (CO2) into the atmosphere. This process, known as solar thermal pyrolysis, uses heat from the sun to split the methane molecules directly.

03 NATURAL GAS↗
DOE OSTI2026

Powering Progress: Increasing capacity for State Agency participation in the development of solar guidelines

This project supported State Fish and Wildlife Agencies (SFWAs) in their participation in an industry-led process to develop nationwide utility scale solar energy wildlife guidelines intended to mitigate the impacts of large-scale solar development on wildlife and natural habitats. Led by the Association of Fish and Wildlife Agencies (AFWA), the project focused on documenting and communicating SFWA priorities, providing logistical and technical support for state engagement, and disseminating early outcomes to promote adoption and use.

14 SOLAR ENERGY↗
DOE OSTI2022

The Impact of Stochastic Perturbations in Physics Variables for Predicting Surface Solar Irradiance

We present a probabilistic framework tailored for solar energy applications referred to as the Weather Research and Forecasting-Solar ensemble prediction system (WRF-Solar EPS). WRF-Solar EPS has been developed by introducing stochastic perturbations into the most relevant physical variables for solar irradiance predictions. In this study, we comprehensively discuss the impact of the stochastic perturbations of WRF-Solar EPS on solar irradiance forecasting compared to a deterministic WRF-Solar prediction (WRF-Solar DET), a stochastic ensemble using the stochastic kinetic energy backscatter scheme (SKEBS), and a WRF-Solar multi-physics ensemble (WRF-Solar PHYS). The performances of the four forecasts are evaluated using irradiance retrievals from the National Solar Radiation Database (NSRDB) over the contiguous United States. We focus on the predictability of the day-ahead solar irradiance forecasts during the year of 2018. The results show that the ensemble forecasts improve the quality of the forecasts, compared to the deterministic prediction system, by accounting for the uncertainty derived by the ensemble members. However, the three ensemble systems are under-dispersive, producing unreliable and overconfident forecasts due to a lack of calibration. In particular, WRF-Solar EPS produces less optically thick clouds than the other forecasts, which explains the larger positive bias in WRF-Solar EPS (31.7 W/m 2 ) than in the other models (22.7–23.6 W/m 2 ). This study confirms that the WRF-Solar EPS reduced the forecast error by 7.5% in terms of the mean absolute error (MAE) compared to WRF-Solar DET, and provides in-depth comparisons of forecast abilities with the conventional scientific probabilistic approaches (i.e., SKEBS and a multi-physics ensemble). Guidelines for improving the performance of WRF-Solar EPS in the future are provided.

14 SOLAR ENERGY↗