Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Secondary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 2: Effects of SGR on tars produced from varying ranks of coal

Herein, this work explores the extent to which secondary gas-phase reactions (SGR) in pyrolysis can be used to modify coal tar chemistries from coals of different ranks in favor of improved anisotropy formation in their respective pitches. Pyrolysis was performed on four different coals of varying bituminous rank (Utah Sufco, Wyoming PRB Black Thunder, Illinois #6, and West Virginia Flying Eagle), with SGR temperatures ranging from 800 to 900° C and nominal SGR gas-phase residence times from 1 to 2.5 s. The oxygen content, aliphatic content, and molecular weight distributions of the coal tar samples were measured to indicate the changes with increasing levels of SGR, and microscopy was also used to measure changes in anisotropy formation in the resulting pitch samples. Generally, for all coals tested, increased levels of pyrolysis SGR led to decreased oxygen and aliphatic content, increased molecular weight sizes, and improved anisotropy formation. However, it was clear that the extent of these property changes depended on the chemistry and rank of the starting coal feedstock. Despite the relatively high rank of the Illinois #6 coal, its respective pitch samples performed poorly in improving anisotropy formation, due to its high sulfur content. The PRB, Sufco, and Flying Eagle coals performed better in their anisotropy formation than Illinois #6, depending on their respective coal ranks. Statistical analysis (analysis of variance, ANOVA) performed on the sample characterization data also suggests that SGR temperature is consistently the most dominant and significant effect on the resulting coal products.

01 COAL, LIGNITE, AND PEAT↗

Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 3: Modifying non-coking coal tar through co-pyrolysis of coal with linear low-density polyethylene and high-impact polystyrene

Herein, this work focuses on co-pyrolysis experiments of Utah Sufco coal with linear low-density polyethylene (LLDPE) and high-impact polystyrene (HIPS). These two plastic types have differing pyrolysis chemistries and have different hydrogen transfer behavior. Similar to earlier work in this series of papers, controlled secondary gas-phase reactions during pyrolysis were used to induce cracking and condensation reactions among the pyrolytic tar species. Co-pyrolysis tests were performed with feed plastic percentages ranging from 10-20 wt% and pyrolysis SGR temperatures ranging from 800-900°C. Analyses of the intermediate tar products showed that oxygen contents and aromaticity were substantially different, depending on the plastic, and resulting pitch softening points and mesophase contents also varied greatly depending on the starting plastic feedstock used. Most of the synergies observed in the co-pyrolysis results were negative, except for the oxygen content. Oxygen contents were higher than expected when LLDPE was used, resulting in reactive pitches with softening points > 350°C. On the other hand, oxygen contents were lower than expected when HIPS was used, resulting in less reactive pitches. Ultimately, only the HIPS/coal samples created at the SGR temperature of 900°C had reasonable softening points at or under 350°C, making them the only samples created in this work potentially suitable for mesophase pitch-based carbon fiber production. The success in creating fusible mesophase pitches from co-pyrolyzing HIPS with Utah Sufco coal is likely attributed to the fact that polystyrene is a stronger hydrogen acceptor rather than donor, which should facilitate more cracking rather than stabilizing tar oxygen functional groups, making the tar species ultimately less reactive during thermal conversion to mesophase pitch.

01 COAL, LIGNITE, AND PEAT↗

Secondary electron emission of Y{sub 2}O{sub 3}-Mo cermet cathode

Y{sub 2}O{sub 3}-Mo cermet cathodes were prepared by mechanical mixing of Y{sub 2}O{sub 3} and Mo powder. The prepared cermet cathode provides a certain secondary emission yield (3.09), about 1.8 times lower than that for the cathode prepared by sol-gel method. It was found that the cathode prepared by sol-gel method had a smaller grain size, which could be attributed to its higher emission property. The energy distributions of primary electrons in the cathodes with different grain sizes have been simulated by Monte Carlo method. Based on the calculation results, the emission models of the cathodes are established and presented. The cathodes with different grain sizes exhibited different ways of emission. Two types of emission, of reflection emission and transmission emission, existed in the cathode with small grain sizes whereas only transmission emission existed in the cathode with large grain sizes.

36 MATERIALS SCIENCE↗

Influence of the substrate temperature on the microstructure and electron-induced secondary electron emission properties of MgO/Au composite film

Highlights: • MgO/Au film was prepared by magnetron sputtering of individual Mg and Au targets. • A higher substrate temperature (T{sub s}) is conducive to the growth of MgO grains. • The surface roughness firstly rises and then decreases with T{sub s} increasing. • The increase of T{sub s} greatly enhances the SEE coefficient of the composite film. - Abstract: The influence of the substrate temperature (T{sub s}) on the microstructure and electron-induced secondary electron emission (SEE) properties of MgO/Au composite film prepared by reactive magnetron sputtering was investigated in order to improve the SEE performance of this composite film. During the deposition of MgO/Au film, a relatively high T{sub s} is conducive to the growth of MgO grains and causes the formation of some large aggregated gold particles on which MgO grains cover in the composite film. In terms of the SEE properties of MgO/Au film, the increase of T{sub s} brings about a significant improvement of SEE coefficient (δ), while it also leads to a slightly accelerated SEE degradation under the continuous electron bombardment due to a faster surface charging. The MgO/Au film prepared at T{sub s} of 773 K has a δ value of 4.9 at a primary electron energy of 200 eV and the maximum δ value of 11.5.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Consistent production of chlorine-stressed bacteria from non-chlorinated secondary sewage effluents for use in the U.S. Environmental Protection Agency Alternate Test Procedure protocol

The U.S. Environmental Protection Agency Alternative Test Procedure protocol outlines a method to produce chlorine-stressed bacteria for water quality testing. Achieving consistent results is challenging due effluent variability. We describe methods for generating chlorine-stressed total coliforms from secondary effluent to evaluate detection technologies to demonstrate comparability to EPA reference methods

59 BASIC BIOLOGICAL SCIENCES↗

A multistep enrichment process with custom growth medium improves resuscitation of chlorine-stressed coliforms from secondary sewage effluents

Resuscitation and detection of stressed coliforms in treated water samples is needed to assess and prevent health effects from adverse exposure. Herein, we developed a custom growth media that improved total coliform resuscitation from chlorine-stressed samples from secondary effluent to see if detection time could be reduced from 18 to 8 hours.

59 BASIC BIOLOGICAL SCIENCES↗

Advanced focusing system for secondary electrons in a bunch shape monitor

Non-destructive measurements of longitudinal beam profile in non-relativistic hadron accelerators are usually performed with Bunch Shape Monitors that utilize secondary electron emission to reproduce the shape of a primary ion beam. The existing devices, however, have poor electron collection efficiency from the wire and are limited to one dimensional measurements of the phase coordinate. Here, we present the development of a bunch shape monitor with improved performance for proton beams to be used in the Spallation Neutron Source accelerator. This improvement was achieved by adding focusing optics between the wire and the entrance slit, which will also allow measurements over a much higher dynamic range. Here we present the design, simulation and experimental test results of the developed new electron beam guidance system for the existing SNS bunch shape monitor that allowed significant improvement in the collection efficiency.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Intense formation of secondary ultrafine particles from Amazonian vegetation fires and their invigoration of deep clouds and precipitation

New particle formation (NPF) in fire smoke is thought to be unlikely due to large condensation and coagulation sinks that scavenge molecular clusters. We analyze aircraft measurements over the Amazon and find that fires significantly enhance NPF and ultrafine particle (UFP < 50 nm diameter) numbers compared to background conditions, contrary to previous understanding. We identify that the nucleation of dimethylamine with sulfuric acid, which is aided by the formation of extremely low volatility organics in biomass-burning smoke, can overcome the large condensation and coagulation sinks and explain aircraft observations. We show that freshly formed clusters rapidly grow to UFP sizes through biomass-burning secondary organic aerosol formation, leading to a 10-fold increase in UFP number concentrations. Here, we find a contrasting effect of UFPs on deep convective clouds compared to the larger particles from primary emissions for the case investigated here. UFPs intensify the deep convective clouds and precipitation due to increased condensational heating, while larger particles delay and reduce precipitation.

54 ENVIRONMENTAL SCIENCES↗

Investigation of pyruvic acid photolysis at the air-liquid interface as a source of aqueous secondary organic aerosols

Pyruvic acid (PA) is a ubiquitous 2-oxocarboxylic acid in the atmosphere. Its photochemical process at the air-liquid (a-l) interface has been suggested as an important source of aqueous secondary organic aerosols. Here, we investigated the photochemical reaction pathways of PA at the a-l interface using synchrotron-based vacuum ultraviolet single-photon ionization mass spectrometry (VUV SPI-MS) coupled with the System for Analysis at the Liquid Vacuum Interface (SALVI) microreactor. Results from mass spectral analysis and the determination of appearance energies (AEs) indicate that photolysis of PA can generate radicals, then they recombine with carboxylic acids and simple molecular oligomers. Furthermore, the preliminary products could form larger oligomers via radical reaction or esterification in the presence of hydroxyl and carboxyl functional groups. Mass spectral comparison shows that most photochemical reactions would complete within 4 h. The expanded photochemistry-driven reaction flowchart of PA is proposed based on the newly discovered products. Our results reveal that the interfacial PA photochemical reactions have different mechanisms from the bulk liquid due to the interfacial properties, such as molecular density, composition, and ion concentration. Our findings show that in situ mass spectral analysis with bright photon ionization is useful to elucidate the contribution of a-l interfacial reactions leading to aqSOA formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying and Modeling the Impact of Phase State on the Ice Nucleation Abilities of 2-Methyltetrols as a Key Component of Secondary Organic Aerosol Derived from Isoprene Epoxydiols

Organic aerosols (OAs) may serve as ice-nucleating particles (INPs), impacting the formation and properties of cirrus clouds when their phase state and viscosity are in the semisolid to glassy range. However, there is a lack of direct parameterization between aerosol viscosity and their ice nucleation capabilities. In this study, we experimentally measured the ice nucleation rate of 2-methyltetrols (2-MT) aerosols, a key component of isoprene-epoxydiol-derived secondary organic aerosols (IEPOX-SOA), at different viscosities. These results demonstrate that the phase state has a significant impact on the ice nucleation abilities of OA under typical cirrus cloud conditions, with the ice nucleation rate increasing by 2 to 3 orders of magnitude when the phase state changes from liquid to semisolid. An innovative parametric model based on classical nucleation theory was developed to directly quantify the impact of viscosity on the heterogeneous nucleation rate. This model accurately represents our laboratory measurement and can be implemented into climate models due to its simple, equation-based form. Based on data collected from the ACRIDICON-CHUVA field campaign, our model predicts that the INP concentration from IEPOX-SOA can reach the magnitude of 1 to tens per liter in the cirrus cloud region impacted by the Amazon rainforest, consistent with recent field observations and estimations. This novel parameterization framework can also be applied in regional and global climate models to further improve representations of cirrus cloud formation and associated climate impacts.

2-methyltetrol↗

Simulating Droplet-Resolved Haze and Cloud Chemistry Forming Secondary Organic Aerosols in Turbulent Conditions within Laboratory and Cloud Parcels

Most of our existing knowledge of cloud chemistry in regards to forming secondary organic aerosols (SOA) is based on measurements in bulk aqueous solutions. However, SOA reaction kinetics derived from bulk solution measurements might differ from the kinetics in actual cloud droplets, since turbulent mixing and ionic strengths, and ratio of surface area to volume in individual cloud droplets might vary substantially from bulk solutions in the real atmosphere. Three-dimensional models at various scales have been used to simulate aqueous chemistry. However, most of these models do not resolve turbulence down to the smallest length scales of 1 mm and do not simulate cloud chemistry in individual cloud droplets due to large computational costs. Here we incorporate the formation of isoprene epoxydiol SOA (IEPOX-SOA) in individual droplets within a one-dimensional explicit mixing parcel model (EMPM-Chem). We apply EMPM-Chem to simulate turbulence and droplet-resolved IEPOX-SOA formation using a configuration based on the Michigan Tech Pi chamber. We find that the dissolution of IEPOX gases is weighted more towards larger cloud droplets due to their large liquid water content (compared to smaller droplets), while the conversion of dissolved IEPOX to IEPOX-SOA is much greater within smaller deliquesced haze particles due to their higher acidity and ionic strengths compared to cloud droplets. We also find that as droplet residence times increase in the chamber, e.g., due to increasing ammonium bisulfate seed aerosol injection rates and/or increasing heights of the chamber, formation of IEPOX-SOA increases substantially. Thus, our EMPM-Chem model could be used to design future cloud chambers to maximize SOA production from cloud chemistry. We also apply the EMPM-Chem model to simulate how IEPOX-SOA formation evolves in individual cloud droplets within rising cloudy parcels in the atmosphere. We find that as subsaturated air is entrained into and turbulently mixed with the cloud parcel, evaporation causes a reduction in droplet sizes, which leads to corresponding increases in per droplet ionic strength and acidity. Increased droplet acidity in turn greatly accelerates the kinetics of IEPOX-SOA formation. In conclusion, our results provide key insights into single-cloud-droplet chemistry, suggesting that entrainment mixing may be an important process that increases SOA formation in the real atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Surface Crust Formation Controls Evaporation Kinetics of Secondary Organic Aerosols

Gas-particle partitioning is critical for the evolution of secondary organic aerosols (SOA) in the atmosphere. SOA particles evaporate more slowly than expected at nearly size-independent rates, but the underlying mechanism remains controversial. Here, in this study, we apply kinetic multilayer modeling to simulate evaporation of α-pinene SOA, demonstrating that surface crust formation, emerging from accumulation of low-volatility compounds at the particle surface, leads to slow evaporation and reduced size dependence of the evaporation rate. While evaporation induced by decomposition of oligomers would naturally lead to size-independent evaporation rates, we observe and simulate nearly size-independent slow evaporation of polyethylene glycol mixture particles containing polymeric species that do not decompose, confirming the relevance of composition-dependent diffusivity for size-independent, slow evaporation. Slow evaporation of limonene SOA was also observed in environmental chamber experiments, and model simulations demonstrate strong surface crust formation with bulk diffusivity being depressed by up to 5 orders of magnitude compared to the inner bulk. We present experimental evidence using a surface-based mass spectrometry technique that shows that the particle surface becomes enriched in high molecular weight compounds upon evaporation of monomers. Our findings imply that viscous surface crusts may also limit the growth and chemical transformation of SOA particles, influencing their impacts on air quality and climate.

heterogeneous chemistry↗

Photolysis Controls Atmospheric Budgets of Biogenic Secondary Organic Aerosol

Secondary organic aerosol (SOA) accounts for a large fraction of tropospheric particulate matter. While SOA production rates and mechanisms have been extensively investigated, loss pathways remain uncertain. Most large-scale chemistry and transport models account for mechanical deposition of SOA, but not chemical losses, such as photolysis. There is also a paucity of laboratory measurements of SOA photolysis, which limits how well photolytic losses can be modeled. Here we show, through a combined experimental and modeling approach, that photolytic loss of SOA mass significantly alters SOA budget predictions. Using environmental chamber experiments, we find that SOA produced from several biogenic volatile organic compounds (VOCs) undergoes photolysis-induced mass loss at rates between 0 and 2.2% ± 0.4% of nitrogen dioxide (NO 2 ) photolysis, equivalent to average atmospheric lifetimes as short as 10 hours. We incorporate our photolysis rates into a regional chemical transport model to test the sensitivity of predicted SOA mass concentrations to photolytic losses. The addition of photolysis at rates consistent with our experimental conditions causes a ~50% reduction in biogenic SOA loadings over the Amazon, indicating that photolysis exerts a substantial control over the atmospheric SOA lifetime, with a likely dependence upon SOA molecular composition and thus production mechanisms.

54 ENVIRONMENTAL SCIENCES↗

Secondary Structures of Ubiquitin Ions Soft-Landed onto Self-Assembled Monolayer Surfaces

The secondary structures of multiply charged ubiquitin ions soft-landed onto self-assembled monolayer (SAM) surfaces were studied using in situ infrared reflection-absorption spectroscopy (IRRAS). Two charge states of ubiquitin, 5+ and 13+, were mass selected separately from a mixture of different charge states produced by electrospray ionization (ESI). The low 5+ charge state represents a native-like folded state of ubiquitin, while the high 13+ charge state assumes an extended, almost linear conformation. Each of the two charge states was soft-landed onto a CH 3- and COOH-terminated SAM of alkylthiols on gold (HSAM and COOH-SAM). HSAM is a hydrophobic surface known to stabilize helical conformations of soft-landed protonated peptides, whereas COOH-SAM is a hydrophilic surface that preferentially stabilizes β-sheet conformations. IRRAS spectra of the soft-landed ubiquitin ions were acquired as a function of time during and after ion soft-landing. Similar to smaller peptide ions, helical conformations of ubiquitin are found to be more abundant on HSAM, while the relative abundance of β-sheet conformations increases on COOH-SAM. The initial charge state of ubiquitin also has a pronounced effect on its conformation on the surface. Specifically, on both surfaces, a higher relative abundance of helical conformations and lower relative abundance of β-sheet conformations is observed for the 13+ charge state compared to the 5+ charge state. Time-resolved experiments indicate that the α-helical band in the spectrum of the 13+ charge state slowly increases with time on the HSAM surface and decreases in the spectrum of the 13+ charge state on COOH-SAM. These results further support the preference of the hydrophobic HSAM surface toward helical conformations and demonstrate that soft-landed protein ions may undergo slow conformational changes during and after deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time of Flight Secondary Ion Mass Spectrometry for Characterization of Pt-Coated Porous Transport Layers in PEM Water Electrolyzers

Titanium-based porous transport layers (PTLs) and iridium-based catalyst layers (CLs) are two main components of proton exchange membrane water electrolyzers (PEMWEs). PTLs are typically coated with platinum to minimize interfacial losses and to support long-term operation. Optimizing coatings and the PTL-CL interface requires comprehensive characterization. This study establishes time-of-flight secondary ion mass spectrometry (ToF-SIMS) as a valuable technique for PTL characterization, addressing capabilities and limitations related to PTL morphology. A methodology was developed that uses a Cs + sputter beam for dynamic depth profiling, with data collected in both positive-ion (MCs + ) and negative-ion modes to generate depth profiles, 2D ion maps, and 3D ion reconstructions. ToF-SIMS detected relative differences in platinum-layer thickness between samples; these trends were validated by cross-sectional scanning transmission electron microscope (STEM) measurements and flat-titanium substrate controls. Interfacial oxide layers are identified in both ion modes, with enhanced oxide sensitivity in negative mode. The technique’s high sensitivity enables detection of nanometer-scale coatings and trace impurities within the bulk PTL structure. These results provide a methodological framework for analyzing Pt-coated PTLs, with the potential to extend to other components in PEMWEs and other electrolyzer systems.

36 MATERIALS SCIENCE↗

Helium Ion Microscopy with Secondary Ion Mass Spectrometry for Nanoscale Chemical Imaging and Analysis of Polyolefins

To date, chemical imaging of polymers and polymer blends has been primarily accomplished using time-of-flight secondary ion mass spectrometry (ToF-SIMS) to directly visualize the distribution of components in a complex material with spatial resolution ranging from 100 nm to 5 μm. However, in many cases, this resolution falls far short of visualizing interfaces directly. To overcome these limitations, recent work has focused on developing a SIMS detection system based on a helium ion microscope (HIM) enabling chemical imaging with a demonstrated ~14 nm spatial resolution. Here, we utilize HIM-SIMS for differentiation between the olefin-based polymers of polyethylene (PE) and polypropylene (PP). We illustrate both analyses for separating PE and PP using specific mass fragment ratios as well as demonstrate spatially resolved imaging of phase-separated domains within PE. Altogether, we demonstrate the abilities of HIM-SIMS as a multimodal chemical technique for imaging and quantification of polyolefin interfaces, which could be more broadly applied to the analysis of more complex polymeric systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the Size Distribution and Chemical Composition of Secondary Organic Aerosols during the Reactive Uptake of Isoprene-Derived Epoxydiols under Low-Humidity Condition

Reactive uptake of isoprene epoxydiols (IEPOX), which are isoprene oxidation products, onto acidic sulfate aerosols is recognized to be an important mechanism for the formation of isoprene-derived secondary organic aerosol (SOA). While a mechanistic understanding of IEPOX-SOA formation exists, several processes affecting their formation remain uncertain. Evaluating mechanistic IEPOX-SOA models with controlled laboratory experiments under longer atmospherically relevant timescales is critical. Here, we implement our latest understanding of IEPOX-SOA formation within a box model to simulate the measured reactive uptake of IEPOX on polydisperse ammonium bisulfate seed aerosols within an environmental Teflon chamber. The model is evaluated with single-particle measurements of size distribution, volume, density, and composition of aerosols due to IEPOX-SOA formation at timescales of hours. Additionally, we find that the model can simulate the growth of particles due to IEPOX multiphase chemistry, as reflected in increases of the mean particle size and volume concentrations, and a shift of number size distribution to larger sizes. The model also predicts the observed evolution of particle number mean diameter and total volume concentrations at the end of the experiment. We show that in addition to self-limiting effects of IEPOX-SOA coatings, accounting for the molar balance between inorganic and organic sulfate and mass accommodation coefficient of IEPOX are important parameters governing modeling of IEPOX-SOA formation. Thus, models which do not account for the molar sulfate balance and/or diffusion limitations within IEPOX-SOA coatings are likely to predict too high IEPOX-SOA formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical Differences between Phenolic Secondary Organic Aerosol Formed through Gas-Phase and Aqueous-Phase Reactions

Phenolic compounds, which are significant emissions from biomass burning (BB), undergo rapid photochemical reactions in both gas and aqueous phases to form secondary organic aerosol, namely, gasSOA and aqSOA, respectively. The formation of gasSOA and aqSOA involves different reaction mechanisms, leading to different product distributions. In this study, we investigate the gaseous and aqueous reactions of guaiacol a representative BB phenol to elucidate the compositional differences between phenolic aqSOA and gasSOA. Aqueous-phase reactions of guaiacol produce higher SOA yields than gas-phase reactions (e.g., roughly 60 vs 30% at one half-life of guaiacol). These aqueous reactions involve more complex reaction mechanisms and exhibit a more gradual SOA evolution than their gaseous counterparts. Initially, gasSOA forms with high oxidation levels (O/C > 0.82), while aqSOA starts with lower O/C (0.55–0.75). However, prolonged aqueous-phase reactions substantially increase the oxidation state of aqSOA, making its bulk chemical composition closer to that of gasSOA. Additionally, aqueous reactions form a greater abundance of oligomers and high-molecular-weight compounds, alongside a more sustained production of carboxylic acids. AMS spectral signatures representative of phenolic gasSOA have been identified, which, together with tracer ions of aqSOA, can aid in the interpretation of field observation data on aerosol aging within BB smoke. The notable chemical differences between phenolic gasSOA and aqSOA highlighted in this study also underscore the importance of accurately representing both pathways in atmospheric models to better predict the aerosol properties and their environmental impacts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗